Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combined experimental and computational characterization of crosslinked collagenbased hydrogels

  • Valero, Clara
  • Amaveda, H.
  • Mora Alfonso, Mario
  • García-Aznar, Jose Manuel
Collagen hydrogels are widely used for in-vitro experiments and tissue engineering applications. Their use has been extended due to their biocompatibility with cells and their capacity to mimic biological tissues; nevertheless their mechanical properties are not always optimal for these purposes. Hydrogels are formed by a network of polymer filaments embedded on an aqueous substrate and their mechanical properties are mainly defined by the filament network architecture and the individual filament properties. To increase properties of native collagen, such as stiffness or strain-stiffening, these networks can be modified by adding crosslinking agents that alter the network architecture, increasing the unions between filaments. In this work, we have investigated the effect of one crosslinking agent, transglutaminase, in collagen hydrogels with varying collagen concentration. We have observed a linear dependency of the gel rigidity on the collagen concentration. Moreover, the addition of transglutaminase has induced an earlier strain-stiffening of the collagen gels. In addition, to better understand the mechanical implications of collagen concentration and crosslinkers inclusion, we have adapted an existing computational model, based on the worm-like chain model (WLC), to reproduce the mechanical behavior of the collagen gels. With this model we can estimate the parameters of the biopolymer networks without more sophisticated techniques, such as image processing or network reconstruction, or, inversely, predict the mechanical properties of a defined collagen network., The work corresponding to C. Valero and J.M. García-Aznar was supported by the European Research Council (ERC) through project ERC-2012-StG 306571 and the Spanish Ministry of Economy and Competitiveness through the project DPI2015-64221-C2-1-R and by the Gobierno de Aragon (research group T86). The work corresponding to H. Amaveda and M.Mora was supported by the Spanish Ministry of Economy and Competitiveness and the European FEDER Program (project ENE1014-52105-R) and by the Gobierno de Aragón (research group T12)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Subject-specific musculoskeletal loading of the tibia: Computational load estimation

  • Garijo Millán, Noelia
  • Verdonschotb, Nico
  • Engelborghsd, Koen
  • García-Aznar, Jose Manuel
  • Pérez, Mª Angeles
The systematic development of subject-specific computer models for the analysis of personalized treatments is currently a reality. In fact, many advances have recently been developed for creating virtual finite element-based models. These models accurately recreate subject-specific geometries and material properties from recent techniques based on quantitative image analysis. However, to determine the subject-specific forces, we need a full gait analysis, typically in combination with an inverse dynamics simulation study. In this work, we aim to determine the subject-specific forces from the computer tomography images used to evaluate bone density. In fact, we propose a methodology that combines these images with bone remodelling simulations and artificial neural networks. To test the capability of this novel technique, we quantify the personalized forces for five subject-specific tibias using our technique and a gait analysis. We compare both results, finding that similar vertical loads are estimated by both methods and that the dominant part of the load can be reliably computed. Therefore, we can conclude that the numerical-based technique proposed in this work has great potential for estimating the main forces that define the mechanical behaviour of subject-specific bone.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A web-based application for automated quantification of chemical gradients induced in microfluidic devices

  • Cóndor, Mar
  • Rüberg, Thomas
  • Borau Zamora, Carlos
  • Piles, Joan
  • García-Aznar, José Manuel
Background and objective Advances in microfabrication have allowed the development and popularization of microfluidic devices, which are powerful tools to recreate three-dimensional (3-D) biologically relevant in vitro models. These microenvironments are usually generated by using hydrogels and induced chemical gradients. Going further, computational models enable, after validation, the simulation of such conditions without the necessity of real experiments, thus saving costs and time. In this work we present a web-based application that allows, based on a previous numerical model, the assessment of different chemical gradients induced within a 3-D extracellular matrix. Methods This application enables the estimation of the spatio-temporal chemical distribution inside microfluidic devices, by defining a first set of parameters characterizing the chip geometry, and a second set characterizing the diffusion properties of the hydrogel-based matrix. The simulated chemical concentration profiles generated within a synthetic hydrogel are calculated remotely on a server and returned to the website in less than 3¿min, thus offering a quick automatic quantification to any user. To ensure the day-to-day applicability, user requirements were investigated prior to tool development, pre-selecting some of the most common geometries. The tool is freely available online, after user registration, on http://m2be.unizar.es/insilico_cell under the software tab. Results Four different microfluidic device geometries were defined to study the dependence of the geometrical parameters onto the gradient formation processes. The numerical predictions demonstrate that growth factor diffusion within 3-D matrices strongly depends not only on the physics of diffusion, but also on the geometrical parameters that characterizes these complex devices. Additionally, the effect of the combination of different hydrogels inside a microfluidic device was studied. Conclusions The automatization of microfluidic device geometries generation provide a powerful tool which facilitates to any user the possibility to automatically create its own microfluidic device, greatly reducing the experimental validation processes and advancing in the understanding of in-vitro 3-D cell responses without the necessity of using commercial software or performing real testing experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Combined experimental and computational characterization of crosslinked collagen-based hydrogels

  • Valero, C.
  • Amaveda, H.
  • Mora, M.
  • García-Aznar, J.M.
Collagen hydrogels are widely used for in-vitro experiments and tissue engineering applications. Their use has been extended due to their biocompatibility with cells and their capacity to mimic biological tissues; nevertheless their mechanical properties are not always optimal for these purposes. Hydrogels are formed by a network of polymer filaments embedded on an aqueous substrate and their mechanical properties are mainly defined by the filament network architecture and the individual filament properties. To increase properties of native collagen, such as stiffness or strain-stiffening, these networks can be modified by adding crosslinking agents that alter the network architecture, increasing the unions between filaments. In this work, we have investigated the effect of one crosslinking agent, transglutaminase, in collagen hydrogels with varying collagen concentration. We have observed a linear dependency of the gel rigidity on the collagen concentration. Moreover, the addition of transglutaminase has induced an earlier strain-stiffening of the collagen gels. In addition, to better understand the mechanical implications of collagen concentration and crosslinkers inclusion, we have adapted an existing computational model, based on the worm-like chain model (WLC), to reproduce the mechanical behavior of the collagen gels. With this model we can estimate the parameters of the biopolymer networks without more sophisticated techniques, such as image processing or network reconstruction, or, inversely, predict the mechanical properties of a defined collagen network.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

From individual to collective 3D cancer dissemination: roles of collagen concentration and TGF-ß

  • Plou, J.
  • Juste-Lanas, Y.
  • Olivares, V.
  • del Amo, C.
  • Borau, C.
  • García-Aznar, J.M.
Cancer cells have the ability to migrate from the primary (original) site to other places in the body. The extracellular matrix affects cancer cell migratory capacity and has been correlated with tissue-specific spreading patterns. However, how the matrix orchestrates these behaviors remains unclear. Here, we investigated how both higher collagen concentrations and TGF-ß regulate the formation of H1299 cell (a non-small cell lung cancer cell line) spheroids within 3D collagen-based matrices and promote cancer cell invasive capacity. We show that at low collagen concentrations, tumor cells move individually and have moderate invasive capacity, whereas when the collagen concentration is increased, the formation of cell clusters is promoted. In addition, when the concentration of TGF-ß in the microenvironment is lower, most of the clusters are aggregates of cancer cells with a spheroid-like morphology and poor migratory capacity. In contrast, higher concentrations of TGF-ß induced the formation of clusters with a notably higher invasive capacity, resulting in clear strand-like collective cell migration. Our results show that the concentration of the extracellular matrix is a key regulator of the formation of tumor clusters that affects their development and growth. In addition, chemical factors create a microenvironment that promotes the transformation of idle tumor clusters into very active, invasive tumor structures. These results collectively demonstrate the relevant regulatory role of the mechano-chemical microenvironment in leading the preferential metastasis of tumor cells to specific tissues with high collagen concentrations and TFG-ß activity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Integration of in vitro and in silico Models Using Bayesian Optimization With an Application to Stochastic Modeling of Mesenchymal 3D Cell Migration

  • Merino-Casallo, F.
  • Gomez-Benito, M.J.
  • Juste-Lanas, Y.
  • Martinez-Cantin, R.
  • Garcia-Aznar, J.M.
Cellular migration plays a crucial role in many aspects of life and development. In this paper, we propose a computational model of 3D migration that is solved by means of the tau-leaping algorithm and whose parameters have been calibrated using Bayesian optimization. Our main focus is two-fold: to optimize the numerical performance of the mechano-chemical model as well as to automate the calibration process of in silico models using Bayesian optimization. The presented mechano-chemical model allows us to simulate the stochastic behavior of our chemically reacting system in combination with mechanical constraints due to the surrounding collagen-based matrix. This numerical model has been used to simulate fibroblast migration. Moreover, we have performed in vitro analysis of migrating fibroblasts embedded in 3D collagen-based fibrous matrices (2 mg/ml). These in vitro experiments have been performed with the main objective of calibrating our model. Nine model parameters have been calibrated testing 300 different parametrizations using a completely automatic approach. Two competing evaluation metrics based on the Bhattacharyya coefficient have been defined in order to fit the model parameters. These metrics evaluate how accurately the in silico model is replicating in vitro measurements regarding the two main variables quantified in the experimental data (number of protrusions and the length of the longest protrusion). The selection of an optimal parametrization is based on the balance between the defined evaluation metrics. Results show how the calibrated model is able to predict the main features observed in the in vitro experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A hybrid computational model for collective cell durotaxis

  • Escribano, J.
  • Sunyer, R.
  • Sánchez, M.T.
  • Trepat, X.
  • Roca-Cusachs, P.
  • García-Aznar, J.M.
Collective cell migration is regulated by a complex set of mechanical interactions and cellular mechanisms. Collective migration emerges from mechanisms occurring at single cell level, involving processes like contraction, polymerization and depolymerization, of cell–cell interactions and of cell–substrate adhesion. Here, we present a computational framework which simulates the dynamics of this emergent behavior conditioned by substrates with stiffness gradients. The computational model reproduces the cell’s ability to move toward the stiffer part of the substrate, process known as durotaxis. It combines the continuous formulation of truss elements and a particle-based approach to simulate the dynamics of cell–matrix adhesions and cell–cell interactions. Using this hybrid approach, researchers can quickly create a quantitative model to understand the regulatory role of different mechanical conditions on the dynamics of collective cell migration. Our model shows that durotaxis occurs due to the ability of cells to deform the substrate more in the part of lower stiffness than in the stiffer part. This effect explains why cell collective movement is more effective than single cell movement in stiffness gradient conditions. In addition, we numerically evaluate how gradient stiffness properties, cell monolayer size and force transmission between cells and extracellular matrix are crucial in regulating durotaxis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

A workbench for biomedical applications based on image analysis

  • Borau, Carlos
  • Amo, Cristina del
  • Asín, Jesús
  • Movilla, Nieves
  • Cóndor, Mar
  • García-Aznar, José Manuel
Unraveling the underlying mechanisms involved in single and collective cell migration, organization, tissue formation and regeneration are some of the currently spearheading research topics worldwide. To overcome the intrinsic difficulties associated to realistic environments in 3D, a multidisciplinary framework combining computer simulations and experiments is proposed. The success of this approach relies on result validation (quantitative comparison: computational vs. experimental), so we have polished different techniques and computational tools to get as accurate measurements as possible. For that, we take advantage of our own designed microfluidic devices and perform thorough image and statistical analyses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Matrix architecture plays a pivotal role in 3D osteoblast migration: The effect of interstitial fluid flow

  • Del Amo, C.
  • Olivares, V.
  • Cóndor, M.
  • Blanco, A.
  • Santolaria, J.
  • Asín, J.
  • Borau, C.
  • García-Aznar, J.M.
Osteoblast migration is a crucial process in bone regeneration, which is strongly regulated by interstitial fluid flow. However, the exact role that such flow exerts on osteoblast migration is still unclear. To deepen the understanding of this phenomenon, we cultured human osteoblasts on 3D microfluidic devices under different fluid flow regimes. Our results show that a slow fluid flow rate by itself is not able to alter the 3D migratory patterns of osteoblasts in collagen-based gels but that at higher fluid flow rates (increased flow velocity) may indirectly influence cell movement by altering the collagen microstructure. In fact, we observed that high fluid flow rates (1 µl/min) are able to alter the collagen matrix architecture and to indirectly modulate the migration pattern. However, when these collagen scaffolds were crosslinked with a chemical crosslinker, specifically, transglutaminase II, we did not find significant alterations in the scaffold architecture or in osteoblast movement. Therefore, our data suggest that high interstitial fluid flow rates can regulate osteoblast migration by means of modifying the orientation of collagen fibers. Together, these results highlight the crucial role of the matrix architecture in 3D osteoblast migration. In addition, we show that interstitial fluid flow in conjunction with the matrix architecture regulates the osteoblast morphology in 3D.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Degradation of extracellular matrix regulates osteoblast migration: A microfluidic-based study

  • Movilla, N.
  • Borau, C.
  • Valero, C.
  • García-Aznar, J.M.
Bone regeneration is strongly dependent on the capacity of cells to move in a 3D microenvironment, where a large cascade of signals is activated. To improve the understanding of this complex process and to advance in the knowledge of the role of each specific signal, it is fundamental to analyze the impact of each factor independently. Microfluidic-based cell culture is an appropriate technology to achieve this objective, because it allows recreating realistic 3D local microenvironments by taking into account the extracellular matrix, cells and chemical gradients in an independent or combined scenario. The main aim of this work is to analyze the impact of extracellular matrix properties and growth factor gradients on 3D osteoblast movement, as well as the role of cell matrix degradation. For that, we used collagen-based hydrogels, with and without crosslinkers, under different chemical gradients, and eventually inhibiting metalloproteinases to tweak matrix degradation. We found that osteoblast''s 3D migratory patterns were affected by the hydrogel properties and the PDGF-BB gradient, although the strongest regulatory factor was determined by the ability of cells to remodel the matrix.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mechanical modeling of collective cell migration: An agent-based and continuum material approach

  • González-Valverde, I.
  • García-Aznar, J.M.
We develop a novel modeling approach that combines a discrete agent-based model and a continuum material model to simulate collective cell migration in epithelial layers. In this approach, cells are represented as particles located at their geometrical center, but also as a polygonal body derived from the Voronoi diagram. Furthermore, we model the tissue as a continuum medium with different spatial domains that represent cell and substrate materials. In fact, the mechanical behavior of each domain is affected by the presence of cells from the discrete model. Moreover, we solve this mechanical problem using the finite element method (FEM). The forces generated by cells are projected to the FE mesh, that is created dynamically during the simulation from the discrete cell representation. After the FE resolution, we use the mesh displacements to determine the new cell positions in the agent-based model. Finally, to demonstrate the potential of this approach to model epithelial tissue mechanics, we simulate two well-studied cases of collective cell migration: durotaxis and gap closure. We use the experimental data from the literature to validate our numerical results. Therefore, the modeling strategy here presented offers a new perspective for a deeper understanding of tissue mechanics that emerge from cell dynamics in epithelial layers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modelling actin polymerization: the effect on confined cell migration

  • Hervas-Raluy, S.
  • Garcia-Aznar, J.M.
  • Gomez-Benito, M.J.
The aim of this work is to model cell motility under conditions of mechanical confinement. This cell migration mode may occur in extravasation of tumour and neutrophil-like cells. Cell migration is the result of the complex action of different forces exerted by the interplay between myosin contractility forces and actin processes. Here, we propose and implement a finite element model of the confined migration of a single cell. In this model, we consider the effects of actin and myosin in cell motility. Both filament and globular actin are modelled. We model the cell considering cytoplasm and nucleus with different mechanical properties. The migration speed in the simulation is around 0.1 µm/min, which is in agreement with existing literature. From our simulation, we observe that the nucleus size has an important role in cell migration inside the channel. In the simulation the cell moves further when the nucleus is smaller. However, this speed is less sensitive to nucleus stiffness. The results show that the cell displacement is lower when the nucleus is stiffer. The degree of adhesion between the channel walls and the cell is also very important in confined migration. We observe an increment of cell velocity when the friction coefficient is higher.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Balance of mechanical forces drives endothelial gap formation and may facilitate cancer and immune-cell extravasation

  • Escribano, J.
  • Chen, M.B.
  • Moeendarbary, E.
  • Cao, X.
  • Shenoy, V.
  • Garcia-Aznar, J.M.
  • Kamm, R.D.
  • Spill, F.
The formation of gaps in the endothelium is a crucial process underlying both cancer and immune cell extravasation, contributing to the functioning of the immune system during infection, the unfavorable development of chronic inflammation and tumor metastasis. Here, we present a stochastic-mechanical multiscale model of an endothelial cell monolayer and show that the dynamic nature of the endothelium leads to spontaneous gap formation, even without intervention from the transmigrating cells. These gaps preferentially appear at the vertices between three endothelial cells, as opposed to the border between two cells. We quantify the frequency and lifetime of these gaps, and validate our predictions experimentally. Interestingly, we find experimentally that cancer cells also preferentially extravasate at vertices, even when they first arrest on borders. This suggests that extravasating cells, rather than initially signaling to the endothelium, might exploit the autonomously forming gaps in the endothelium to initiate transmigration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Image-based characterization of 3D collagen networks and the effect of embedded cells

  • Olivares, Vanesa
  • Cóndor, Mar
  • Amo, Cristina del
  • Asín, Jesús
  • Borau, Carlos
  • García-Aznar, José Manuel
Collagen microstructure is closely related to the mechanical properties of tissues and affects cell migration through the extracellular matrix. To study these structures, three-dimensional (3D) in vitro collagen-based gels are often used, attempting to mimic the natural environment of cells. Some key parameters of the microstructure of these gels are fiber orientation, fiber length, or pore size, which define the mechanical properties of the network and therefore condition cell behavior. In the present study, an automated tool to reconstruct 3D collagen networks is used to extract the aforementioned parameters of gels of different collagen concentration and determine how their microstructure is affected by the presence of cells. Two different experiments are presented to test the functionality of the method: first, collagen gels are embedded within a microfluidic device and collagen fibers are imaged by using confocal fluorescence microscopy; second, collagen gels are directly polymerized in a cell culture dish and collagen fibers are imaged by confocal reflection microscopy. Finally, we investigate and compare the collagen microstructure far from and in the vicinities of MDA-MB 23 cells, finding that cell activity during migration was able to strongly modify the orientation of the collagen fibers and the porosity-related values.