Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Panchromatic Porous Specular Back Reflectors for Efficient Transparent Dye Solar Cells

  • López-López, Carmen
  • Colodrero, Silvia
  • Míguez, Hernán
6 páginas, 4 figuras, 1 tabla, A panchromatic specular reflector based dye solar cell is herein presented. Photovoltaic performance of this novel design is compared to that of cells in which standard diffuse scattering layers are integrated. The capability of the proposed multilayer structures to both emulate the broad band reflection of diffuse scattering layers of standard thickness (around 5 microns) and give rise to similarly high light harvesting and power conversion efficiencies, yet preserving the transparency of the device, is demonstrated. Such white light reflectors are comprised of stacks of different porous optical multilayers, each one displaying a strong reflection at a complementary spectral range, and are designed to leave transmittance unaltered in a narrow red-frequency range at which the sensitized electrode shows negligible absorption, thus allowing to see through the cell. The reflectance bandwidth achieved is three times as broad as the largest previously achieved with any photonic structure integrated in a dye solar cell., The research leading to these results has received funding from 55 the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement n° 307081 (POLIGHT), the Spanish Ministry of Economy and Competitiveness under grants MAT2011-23593 and CONSOLIDER HOPE CSD2007-00007, and the Junta de 60 Andalucía under grants FQM3579 and FQM5247., The authors also thank the Unit of Information Resources for Research of the Spanish National Research Council (URICI-CSIC) for the co-financing of this publication in Open Access., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resonant Photocurrent Generation in Dye-Sensitized Periodically Nanostructured Photoconductors by Optical Field Confinement Effects

  • Anaya, Miguel
  • Calvo, Mauricio E.
  • Luque-Raigón, J. M.
  • Míguez, Hernán
4 páginas, 5 figuras..- Made freely available through Open Access (Author Choice program), Herein we show experimental evidence of resonant photocurrent generation in dye-sensitized periodically nanostructured photoconductors, which is achieved by spectral matching of the sensitizer absorption band to different types of localized photon modes present in either periodic or broken symmetry structures. Results are explained in terms of the calculated spatial distribution of the electric field intensity within the configurations under analysis., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007−2013)/ERC grant agreement n° 307081 (POLIGHT), the Spanish Ministry of Economy and Competitiveness under grants MAT2011−23593 and CONSOLIDER HOPE CSD2007−00007, and the Junta de Andalucía under grants FQM3579 and FQM5247, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Symmetry analysis of the numerical instabilities in the transfer matrix method

  • Luque-Raigón, J. M.
  • Halme, Janne
  • Míguez, Hernán
  • Lozano, Gabriel
This paper discusses the numerical exponential instability of the transfer matrix method (TMM) in the framework of the symmetry formalism. This numerical weakness is attributed to a series of increasingly extreme exponentials that appear in the TMM when it is applied to geometries involving total internal reflection (TIR) or very high absorption. We design a TMM formalism that identifies the internal symmetries of the multilayer geometry. These symmetries suggest particular transformations of a reference system in the TMM that improve its ill-conditioned exponentials. To illustrate the numerical improvements, we present examples with calculations of electric fields. © 2013 IOP Publishing Ltd., This work was partially funded by the Nordic Innovation Center project NORDIC DSC (no. 09053) and the CNB-E project of the TKK/Aalto University Multidisciplinary Institute of Digitalisation and Energy MIDE. H.M. thanks the Spanish Ministry of Economy and Competitiveness for funding under grants MAT2011-23593 and Consolider CSD2007-00007 and Junta de Andalucia for funding under grants FQM- 3579 and FQM-5247. H.M. also thanks the European Research Council for a Starting Grant (POLIGHT)., Nordic Innovation Center, TKK/Aalto University Multidisciplinary Institute of Digitalisation and Energy, Spanish Ministry of Economy and Competitiveness, Junta de Andalucia, European Research Council, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biocompatible Films with Tailored Spectral Response for Prevention of DNA Damage in Skin Cells

  • Níñez-Lozano, Rebeca
  • Pimentel, Belén
  • Castro-Smirnov, José R.
  • Calvo, Mauricio E.
  • Míguez, Hernán
  • Cueva-Méndez, G. de la
Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Environmental effects on the photophysics of organic-inorganic halide perovskites

  • Galisteo-López, Juan F.
  • Calvo, Mauricio E.
  • Míguez, Hernán
  • Anaya, Miguel
The photophysical properties of films of organic-inorganic lead halide perovskites under different ambient conditions are herein reported. We demonstrate that their luminescent properties are determined by the interplay between photoinduced activation and darkening processes, which strongly depend on the atmosphere surrounding the samples. We have isolated oxygen and moisture as the key elements in each process, activation and darkening, both of which involve the interaction with photogenerated carriers. These findings show that environmental factors play a key role in the performance of lead halide perovskites as efficient luminescent materials., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanolevitation phenomena in real plane-parallel systems due to the balance between casimir and gravity forces

  • Esteso, Victoria
  • Carretero-Palacios, Sol
  • Míguez, Hernán
We report on the theoretical analysis of equilibrium distances in real plane-parallel systems under the influence of Casimir and gravity forces at thermal equilibrium. Due to the balance between these forces, thin films of Teflon, silica, or polystyrene in a single-layer configuration and immersed in glycerol stand over a silicon substrate at certain stable or unstable positions depending on the material and the slab thickness. Hybrid systems containing silica and polystyrene, materials which display Casimir forces and equilibrium distances of opposite nature when considered individually, are analyzed in either bilayer arrangements or as composite systems made of a homogeneous matrix with small inclusions inside. For each configuration, equilibrium distances and their stability can be adjusted by fine-tuning of the volume occupied by each material. We find the specific conditions under which nanolevitation of realistic films should be observed. Our results indicate that thin films of real materials in plane-parallel configurations can be used to control suspension or stiction phenomena at the nanoscale., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical Description of Mesostructured Organic¿Inorganic Halide Perovskite Solar Cells

  • Anaya, Miguel
  • Lozano, Gabriel
  • Calvo, Mauricio E.
  • Zhang, Wei
  • Johnston, Michael B.
  • Snaith, Henry J.
  • Míguez, Hernán
Herein we describe both theoretically and experimentally the optical response of solution-processed organic¿inorganic halide perovskite solar cells based on mesostructured scaffolds. We develop a rigorous theoretical model using a method based on the propagation of waves in layered media, which allows visualizing the way in which light is spatially distributed across the device and serves to quantify the fraction of light absorbed by each medium comprising the cell. The discrimination between productive and parasitic absorption yields an accurate determination of the internal quantum efficiency. State-of-the-art devices integrating mesoporous scaffolds infiltrated with perovskite are manufactured and characterized to support the calculations. This combined experimental and theoretical analysis provides a rational understanding of the optical behavior of perovskite cells and can be beneficial for the judicious design of devices with improved performance. Notably, our model justifies the presence of a solid perovskite capping layer in all of the highest efficiency perovskite solar cells based on thinner mesoporous scaffolds., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dye sensitized solar cells as optically random photovoltaic media

  • Gálvez, Francisco Enrique
  • Barnes, Piers R. F.
  • Halme, Janne
  • Míguez, Hernán
In order to enhance optical absorption, light trapping by multiple scattering is commonly achieved in dye sensitized solar cells by adding particles of a different sort. Herein we propose a theoretical method to find the structural parameters (particle number density and size) that optimize the conversion efficiency of electrodes of different thicknesses containing spherical inclusions of diverse composition. Our work provides a theoretical framework in which the response of solar cells containing diffuse scattering particles can be rationalized. Optical simulations are performed by combining a Monte Carlo approach with Mie theory, in which the angular distribution of scattered light is accounted for. Several types of scattering centers, such as anatase, gold and silver particles, as well as cavities, are considered and their effect compared. Estimates of photovoltaic performance, insight into the physical mechanisms responsible for the observed enhancements, and guidelines to improve the cell design are provided. We discuss the results in terms of light transport in weakly disordered optical media and find that the observed variations between the optimum scattering configurations attained for different electrode thicknesses can be understood as the result of the randomization of the light propagation direction at different depths within the active layer. A primary conclusion of our study is that photovoltaic performance is optimised when the scattering properties of the film are adjusted so that the distance over which incident photons are randomized is comparable to the thickness of the film. This simple relationship could also be used as a design rule to attain the optimum optical design in other photovoltaic materials. This journal is © The Royal Society of Chemistry., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Full solution processed mesostructured optical resonators integrating colloidal semiconductor quantum dots

  • Calvo, Mauricio E.
  • Hidalgo, Nuria
  • Schierholz, R.
  • Kovács, A.
  • Fernández-Camacho, A.
  • Bellino, Martín G.
  • Soler-Illia, G.J.A.A.
  • Míguez, Hernán
Ministerio de Economía y Competitividad (España), Herein we show a solution based synthetic pathway to obtain a resonant optical cavity with embedded colloidal semiconductor quantum dots (CSQDs). The optical cavity pore network, surrounded by two dense Bragg mirrors, was designed ad hoc to selectively host the quantum dots, while uncontrolled infiltration of those in the rest of the layered structure was prevented. Coupling between the optical resonant modes of the host and the natural emission of the embedded nanoparticles gives rise to the fine tuning of the luminescence spectrum extracted from the ensemble. Our approach overcomes, without the need for an encapsulating agent and exclusively by solution processing, the difficulties that arise from the low thermal and chemical stability of the CSQDs. It opens the route to achieving precise control over their location and hence over the spectral properties of light emitted by these widely employed nanomaterials. Furthermore, as the porosity of the cavity is preserved after infiltration, the system remains responsive to environmental changes, which provides an added value to the proposed structure, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adaptable Ultraviolet Refl ecting Polymeric Multilayer Coatings of High Refractive Index Contrast

  • Castro Smirnov, José R.
  • Ito, M.
  • Calvo, Mauricio E.
  • López-López, Carmen
  • Jiménez-Solano, Alberto
  • Galisteo-López, Juan F.
  • Zavala-Rivera, Paul
  • Tanaka, K.
  • Sivaniah, Easan
  • Míguez, Hernán
A synthetic route is demonstrated to build purely polymeric nanostructured multilayer coatings, adaptable to arbitrary surfaces, and capable of effi ciently blocking by refl ection a targeted and tunable ultraviolet (UV) range. Refl ection properties are determined by optical interference between UV light beams refl ected at the interfaces between polystyrene layers of different porosity and hence refractive index. As no dopant absorber intervenes in the shielding effect, polymer degradation effects are prevented. Alternated porosity results from the modulation of photochemical effects at the few tens of nanometers length scale, combined with the collective osmotic shock induced during the processing of the precursor diblock copolymer fi lm. Experimental evidence of the application of this method to coat rough surfaces with smooth and conformal UV protecting fi lms is provided, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient bifacial dye-sensitized solar cells through disorder by design

  • Miranda-Muñoz, José M.
  • Carretero-Palacios, Sol
  • Jiménez-Solano, Alberto
  • Li, Yuelong
  • Lozano, Gabriel
  • Míguez, Hernán
Herein we realize an optical design that optimizes the performance of bifacial solar cells without modifying any of the usually employed components. In order to do so, dielectric scatterers of controlled size and shape have been successfully integrated in the working electrodes of dye-sensitized solar cells (DSSCs), resulting in bifacial devices of outstanding performance. Power conversion efficiencies (PCEs) as high as 6.7% and 5.4% have been attained under front and rear illumination, respectively, which represent a 25% and a 33% PCE enhancement with respect to an 8 mm-thick standard solar cell electrode using platinum as the catalytic material. The remarkable bifacial character of our approach is demonstrated by the high rear/front efficiency ratio attained, around 80%, which is among the largest reported for this sort of device. The proposed optimized design is based on a Monte Carlo approach in which the multiple scattering of light within the cell is fully accounted for. We identified that the spherical shape of the scatterers is the key parameter controlling the angular distribution of the scattering, the most efficient devices being those in which the inclusions provide a narrow forward-oriented angular distribution of the scattered light., Funding for the development of the research leading to these results was received from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R. JMMM acknowledges the Spanish Ministry of Education, Culture and Sport for the funding through an FPU program. AJS acknowledges the Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011–23593. YL acknowledges the funding from the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme FP7/2007-2013/under REA grant agreement no. 622533., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photophysical analysis of the formation of organic−inorganic trihalide perovskite films: identification and characterization of crystal nucleation and growth

  • Anaya, Miguel
  • Galisteo-López, Juan F.
  • Calvo, Mauricio E.
  • López, Cefe
  • Míguez, Hernán
In this work we demonstrate that the different processes occurring during hybrid organic−inorganic lead iodide perovskite film formation can be identified and analyzed by a combined in situ analysis of their photophysical and structural properties. Our observations indicate that this approach permits unambiguously identifying the crystal nucleation and growth regimes that lead to the final material having a cubic crystallographic phase, which stabilizes to the well-known tetragonal phase upon cooling to room temperature. Strong correlation between the dynamic and static photoemission results and the temperature-dependent X-ray diffraction data allows us to provide a description and to establish an approximate time scale for each one of the stages and their evolution. The combined characterization approach herein explored yields key information about the kinetics of the process, such as the link between the evolution of the defect density during film formation, revealed by a fluctuating photoluminescence quantum yield, and the gradual changes observed in the PbI2- related precursor structure., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergistic strategies for the preparation of highly efficient dye-sensitized solar cells on plastic substrates: combination of chemical and physical sintering

  • Li, Yuelong
  • Yoo, Kicheon
  • Lee, Doh-Kwon
  • Kim, Jin Young
  • Son, Hae Jung
  • Kim, Jong Hak
  • Lee, Chul-Ho
  • Míguez, Hernán
  • Ko, Min Jae
Preparation of well-interconnected TiO2 electrodes at low temperature is critical for the fabrication of highly efficient dye-sensitized solar cells (DSCs) on plastic substrates. Herein we explore a synergistic approach using a combination of chemical and physical sintering. We formulate a binder-free TiO2 paste based on “nanoglue” as the chemical sintering agent, and use it to construct a photoelectrode on plastic by low-temperature physical compression to further improve the connectivity of TiO2 films. We systematically investigated the factors affecting the photovoltaic performance and found the conditions to achieve electron diffusion lengths as long as 25 mm and charge collection efficiencies as high as 95%, as electrochemical impedance spectroscopy measurements indicate. We apply this approach to obtain a DSC deposited on plastic displaying 6.4% power conversion efficiency based on commercial P25 titania particles, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solution processed high refractive index contrast distributed Bragg reflectors

  • Anaya, Miguel
  • Rubino, Andrea
  • Calvo, Mauricio E.
  • Míguez, Hernán
We have developed a method to alternate porous and dense dielectric films in order to build high refractive index contrast distributed Bragg reflectors (DBRs) capable of reflecting very efficiently in a targeted spectral range employing a small number of layers in the stack. Porous layers made of SiO2 nanoparticles and compact sol–gel processed TiO2 layers are sequentially deposited. The key to the preservation of porosity of every other layer during the deposition process is the use of a sacrificial layer of polystyrene that prevents the infiltration of the interstitial voids between nanoparticles with the homogeneous solution of TiO2 precursors. Our approach allows preparing a series of DBRs operating along the whole visible spectral range. Reflectance values as high as 90% are achieved from only seven layers. The particular distribution of porosity along one direction gives rise to an interesting interplay between the optical properties of the system and the vapor pressure in the surrounding atmosphere, which we foresee could be put into practice in gas sensing devices, The research leading to these results received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014 54852-R. MA is grateful to “La Caixa” Foundation for its financial support. FESEM characterization was performed at CITIUS, and we are grateful for its support., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Maximized performance of dye solar cells on plastic: a combined theoretical and experimental optimization approach

  • Li, Yuelong
  • Carretero-Palacios, Sol
  • Yoo, Kicheon
  • Hak Kim, Jong
  • Jiménez-Solano, Alberto
  • Lee, Chul-Ho
  • Míguez, Hernán
  • Ko, Min Jae
We demonstrate that a combined optimization approach based on the sequential alternation of theoretical analysis and experimental realization gives rise to plastic supported dye solar cells for which both light harvesting efficiency and electron collection are maximized. Rationalized configurations with optimized light trapping and charge extraction are realized to achieve photoanodes on plastic prepared at low temperature, showing a power conversion efficiency of 8.55% and a short circuit photocurrent of 16.11 mA cm 2, unprecedented for plastic based dye solar cell devices. Furthermore, the corresponding fully flexible designs present stable mechanical properties after several bending cycles, displaying 7.79% power conversion efficiency, an average broadband internal quantum efficiency above 90%, and a short circuit photocurrent of 15.94 mA cm 2, which is the largest reported value for bendable cells of this sort to date, Financial support from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R is gratefully acknowledged. YL acknowledges the financial support from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007–2013/ under REA grant agreement no. 622533. AJS thanks Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011–23593. MJK acknowledges funding support from the Global Frontier R&D Program on Center for Multiscale Energy System (2012M3A6A7054856), the Technology Development Program to Solve Climate Changes (2015M1A2A2056824) and 2015 University-Institute cooperation program funded by the National Research Foundation under the Ministry of Science, ICT & Future Planning, Korea. This work was also supported by the KIST institutional programs., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical analysis of CH3NH3SnxPb1 xI3 absorbers: a roadmap for perovskite-on-perovskite tandem solar cells

  • Anaya, Miguel
  • Correa-Baena, Juan P.
  • Lozano, Gabriel
  • Saliba, Michael
  • Anguita, Pablo
  • Roose, Bart
  • Abate, Antonio
  • Steiner, Ullrich
  • Grätzel, Michael
  • Calvo, Mauricio E.
  • Hagfeldt, Anders
  • Míguez, Hernán
Organic–inorganic perovskite structures in which lead is substituted by tin are exceptional candidates for broadband light absorption. Herein we present a thorough analysis of the optical properties of CH3NH3SnxPb1−xI3 films, providing the field with definitive insights about the possibilities of these materials for perovskite solar cells of superior efficiency. We report a user's guide based on the first set of optical constants obtained for a series of tin/lead perovskite films, which was only possible to measure due to the preparation of optical quality thin layers. According to the Shockley–Queisser theory, CH3NH3SnxPb1−xI3 compounds promise a substantial enhancement of both short circuit photocurrent and power conversion efficiency in single junction solar cells. Moreover, we propose a novel tandem architecture design in which both top and bottom cells are made of perovskite absorbers. Our calculations indicate that such perovskite-on-perovskite tandem devices could reach efficiencies over 35%. Our analysis serves to establish the first roadmap for this type of cells based on actual optical characterization data. We foresee that this study will encourage the research on novel near-infrared perovskite materials for photovoltaic applications, which may have implications in the rapidly emerging field of tandem devices, The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT), the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R. MA is grateful to “La Caixa” Foundation for its financial support. AA has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement no 291771. MS is supported by the co-funded Marie Skłodowska Curie fellowship, H2020 grant agreement no. 665667. FESEM characterization was performed at CITIUS, and we are grateful for its support., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron injection and scaffold effects in perovskite solar cells

  • Anaya, Miguel
  • Zhang, Wei
  • Clasen Hames, Bruno
  • Li, Yuelong
  • Fabregat-Santiago, Francisco
  • Calvo, Mauricio E.
  • Snaith, Henry J.
  • Míguez, Hernán
  • Mora-Seró, Iván
In spite of the impressive efficiencies reported for perovskite solar cells (PSCs), key aspects of their working principles, such as electron injection at the contacts or the suitability of the utilization of a specific scaffold layer, are not yet fully understood. Increasingly complex scaffolds attained by the sequential deposition of TiO2 and SiO2 mesoporous layers onto transparent conducting substrates are used to perform a systematic characterization of both the injection process at the electron selective contact and the scaffold effect in PSCs. By forcing multiple electron injection processes at a controlled sequence of perovskite–TiO2 interfaces before extraction, interfacial injection effects are magnified and hence characterized in detail. An anomalous injection behavior is observed, the fingerprint of which is the presence of significant inductive loops in the impedance spectra with a magnitude that correlates with the number of interfaces in the scaffold. Analysis of the resistive and capacitive behavior of the impedance spectra indicates that the scaffolds could hinder ion migration, with positive consequences such as lowering the recombination rate and implications for the current–potential curve hysteresis. Our results suggest that an appropriate balance between these advantageous effects and the unavoidable charge transport resistive losses introduced by the scaffolds will help in the optimization of PSC performance., The research leading to these results received funding from the European Research Council under the European Union's Seventh Framework Program (FP7/2007–2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grants MAT2014-54852-R and MAT2015-70611-ERC. MA is grateful to “La Caixa” Foundation and VPPI of the University of Seville for their financial support. Structural characterization was performed at CITIUS, and we are grateful for their support. B. C. H. is grateful for the support of the National Council of Technological and Scientific Development (CNPq), Brazil, through the Science without Borders program.307081, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic Nanoparticles as Light-Harvesting Enhancers in Perovskite Solar Cells: A User’s Guide

  • Carretero-Palacios, Sol
  • Jiménez-Solano, Alberto
  • Míguez, Hernán
In this Perspective we discuss the implications of employing metal particles of different shape, size, and composition as absorption enhancers in methylammonium lead iodide perovskite solar cells, with the aim of establishing some guidelines for the future development of plasmonic resonance-based photovoltaic devices. Hybrid perovskites present an extraordinarily high absorption coefficient which, as we show here, makes it difficult to extrapolate concepts and designs that are applied to other solution-processed photovoltaic materials. In addition, the variability of the optical constants attained from perovskite films of seemingly similar composition further complicates the analysis. We demonstrate that, by means of rigorous design, it is possible to provide a realistic prediction of the magnitude of the absorption enhancement that can be reached for perovskite films embedding metal particles. On the basis of this, we foresee that localized surface plasmon effects will provide a means to attain highly efficient perovskite solar cells using films that are thinner than those usually employed, hence facilitating collection of photocarriers and significantly reducing the amount of potentially toxic lead present in the device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and Realization of a Novel Optically Disordered Material: A Demonstration of a Mie Glass

  • Miranda-Muñoz, José M.
  • Lozano, Gabriel
  • Míguez, Hernán
Herein, a diffusive material presenting optical disorder is introduced, which represents an example of a Mie glass. Comprising spherical crystalline TiO nanoparticles randomly dispersed in a mesoporous TiO matrix, it is proved that the scattering of light in this inhomogeneous solid can be predicted in an unprecedented manner from single-particle considerations employing Mie theory. To that aim, a study of the dependence of the key parameters employed is performed to describe light propagation in random media, i.e., the scattering mean free path and the transport mean free path, as a function of the size and concentration of the spherical inclusions based on a comparison between experimental results and analytical calculations. It is also demonstrated that Mie glasses enable enhanced fluorescence intensity due to a combined absorptance enhancement of the excitation light combined with an improved outcoupling of the emitted light. The method offers the possibility to perform a deterministic design for the realization of a light diffuser with tailor-made scattering properties., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photonic Tuning of the Emission Color of Nanophosphor Films Processed at High Temperature

  • Geng, Dongling
  • Lozano, Gabriel
  • Calvo, Mauricio E.
  • Núñez, Nuria O.
  • Becerro, Ana Isabel
  • Ocaña, Manuel
  • Míguez, Hernán
Photonics offers new possibilities to tailor the photoluminescence process in phosphor-converted light emitting diodes. Herein, it is demonstrated that the emission color of thin layers of rare-earth doped nanocrystals can be strongly modulated in tunable spectral ranges using optical resonators specifically designed to this end. GdVO4:Dy3+ nanoparticles of controlled size and shape are synthesized using a solvothermal method with which highly transparent nanophosphor thin films are prepared. This paper designs and fabricates optical multilayers, which are transparent in the UV and resonant at the frequencies where the Dy3+ ions emit, to prove that the color coordinates of this emitter can be tuned from green to blue or yellow with unprecedented precision. Key to the achievement herein reported is the careful analysis of the structural and optical properties of thin nanophosphor layers with the processing temperature in order to achieve efficient photoluminescence while preserving the transparency of the film. The results open a new path for fundamental and applied research in solid-state lighting in which photonic nanostructures allow controlling the emission properties of state-of-the-art materials without altering their structure or chemical composition.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong Quantum Confinement and Fast Photoemission Activation in CH3NH3PbI3 Perovskite Nanocrystals Grown within Periodically Mesostructured Films

  • Anaya, Miguel
  • Rubino, Andrea
  • Rojas, T. Cristina
  • Galisteo-López, Juan F.
  • Calvo, Mauricio E.
  • Míguez, Hernán
In this Communication, a synthetic route is demonstrated to obtain stabilized MAPbI nanocrystals embedded in thin metal oxide films that display well-defined and adjustable quantum confinement effects over a wide range of 0.34 eV. Mesostructured TiO and SiO films displaying an ordered 3D pore network are prepared by evaporation-induced self-assembly of a series of organic supramolecular templates in the presence of metal oxide precursors. The pores in the inorganic films obtained after thermal annealing are then used as nanoreactors to synthesize MAPbI crystallites with narrow size distribution and average radius comprised between 1 and 4 nm, depending on the template of choice. Both the static and dynamic photoemission properties of the ensemble display features distinctive of the regime of strong quantum confinement. Photoemission maps demonstrate that the spectral and intensity properties of the luminescence extracted from the perovskite quantum dot loaded films are homogeneous over squared centimeters areas. At variance with their bulk counterparts, constant emission intensity is reached in time scales at least four orders of magnitude shorter., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Absorption enhancement in methylammonium lead iodide perovskite solar cells with embedded arrays of dielectric particles

  • Jiménez-Solano, Alberto
  • Carretero-Palacios, Sol
  • Míguez, Hernán
In the field of hybrid organic-inorganic perovskite based photovoltaics, there is a growing interest in the exploration of novel and smarter ways to improve the cells light harvesting efficiency at targeted wavelength ranges within the minimum volume possible, as well as in the development of colored and/or semitransparent devices that could pave the way both to their architectonic integration and to their use in the flowering field of tandem solar cells. The work herein presented targets these different goals by means of the theoretical optimization of the optical design of standard opaque and semitransparent perovskite solar cells. In order to do so, we focus on the effect of harmless, compatible and commercially available dielectric inclusions within the absorbing material, methylammonium lead iodide (MAPI). Following a gradual and systematic process of analysis, we are capable of identifying the appearance of collective and hybrid (both localized and extended) photonic resonances which allow to significantly improve light harvesting and thus the overall efficiency of the standard device by above 10% with respect to the reference value while keeping the semiconductor film thickness to a minimum. We believe our results will be particularly relevant in the promising field of perovskite solar cell based tandem photovoltaic devices, which has posed new challenges to the solar energy community in order to maximize the performance of semitransparent cells, but also for applications focusing on architectonic integration., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photonic structuring improves the colour purity of rare-earth nanophosphors

  • Geng, Dongling
  • Cabello-Olmo, Elena
  • Lozano, Gabriel
  • Míguez, Hernán
Nanophosphor integration in an optical cavity allows unprecedented control over both the chromaticity and the directionality of the emitted light, without modifying the chemical composition of the emitters or compromising their efficiency. Our approach opens a route towards the development of nanoscale photonics based solid state lighting., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Absorption and Emission of Light in Optoelectronic Nanomaterials: The Role of the Local Optical Environment

  • Jiménez-Solano, Alberto
  • Galisteo-López, Juan F.
  • Míguez, Hernán
Tailoring the interaction of electromagnetic radiation with matter is central to the development of optoelectronic devices. This becomes particularly relevant for a new generation of devices offering the possibility of solution processing with competitive efficiencies as well as new functionalities. These devices, containing novel materials such as inorganic colloidal quantum dots or hybrid organic¿inorganic lead halide perovskites, commonly demand thin (tens of nanometers) active layers in order to perform optimally and thus maximizing the way electromagnetic radiation interacts with these layers is essential. In this Perspective, we discuss the relevance of tailoring the optical environment of the active layer in an optoelectronic device and illustrate it with two real-world systems comprising photovoltaic cells and light emitting devices., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Efficient and Environmentally Stable Flexible Color Converters Based on Confined CH3NH3PbBr3 Nanocrystals

  • Rubino, Andrea
  • Anaya, Miguel
  • Galisteo-López, Juan F.
  • Rojas, T. Cristina
  • Calvo, Mauricio E.
  • Míguez, Hernán
In this work, we demonstrate a synthetic route to attain methylammonium lead bromide (CHNHPbBr) perovskite nanocrystals (nc-MAPbBr, 1.5 nm < size < 3 nm) and provide them with functionality as highly efficient flexible, transparent, environmentally stable, and adaptable color-converting films. We use nanoparticle metal oxide (MOx) thin films as porous scaffolds of controlled nanopores size distribution to synthesize nc-MAPbBr through the infiltration of perovskite liquid precursors. We find that the control over the reaction volume imposed by the nanoporous scaffold gives rise to a strict control of the nanocrystal size, which allows us to observe well-defined quantum confinement effects on the photo-emission, being the luminescence maximum tunable with precision between = 530 nm (green) and = 490 nm (blue). This hybrid nc-MAPbBr/MOx structure presents high mechanical stability and permits subsequent infiltration with an elastomer to achieve a self-standing flexible film, which not only maintains the photo-emission efficiency of the nc-MAPbBr unaltered but also prevents their environmental degradation. Applications as adaptable color-converting layers for light-emitting devices are envisaged and demonstrated., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unbroken perovskite: interplay of morphology, electro-optical properties, and ionic movement

  • Correa-Baena, Juan-Pablo
  • Anaya, Miguel
  • Lozano, Gabriel
  • Tress, Wolfgang
  • Domanski, Konrad
  • Saliba, Michael
  • Matsui, Taisuke
  • Jacobsson, Tor Jesper
  • Calvo, Mauricio E.
  • Abate, Antonio
  • Grätzel, Michael
  • Míguez, Hernán
  • Hagfeldt, Anders
A study investigates the interplay of morphology, electro-optical properties, and ionic movement in an unbroken perovskite. By varying the thickness of the perovskite capping layer, the study investigate both its effect on the photocurrent to achieve record photovoltaic characteristics and on the crystal formation, which in turn is found to be responsible for the hysteresis behavior. Investigations have revealed that crystals of at least 150 nm are required to achieve high fill factor (FF) and hysteresis-free devices. The study demonstrates that thinner layers, composed of small crystals, show high series resistance and slower current transient behavior due to a change in ionic displacement behavior, yielding low FF and highly hysteretic current-voltage curves., The research leading to these results received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement No. 307081 (POLIGHT) Project, the Spanish Ministry of Economy and Competitiveness under Grant MAT2014-54852-R. M.A. is grateful to “La Caixa” Foundation for its financial support. A.A. received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under grant agreement No. 291771. MINECO/ICTI2013-2016/MAT2014-54852-R info:eu-repo/grantAgreement/EC/FP7/291771
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Three-dimensional optical tomography and correlated elemental analysis of hybrid perovskite microstructures: an insight into defect-related lattice distortion and photoinduced Ion migration

  • Galisteo-López, Juan F.
  • Li, Yuelong
  • Míguez, Hernán
Organic lead halide perovskites have recently been proposed for applications in light-emitting devices of different sorts. More specifically, regular crystalline microstructures constitute an efficient light source and fulfill the geometrical requirements to act as resonators, giving rise to waveguiding and optical amplification. Herein we show three-dimensional laser scanning confocal tomography studies of different types of methylammonium lead bromide microstructures which have allowed us to dissect their photoemission properties with a precision of 0.036 μm. This analysis shows that their spectral emission presents strong spatial variations which can be attributed to defect-related lattice distortions. It is also largely enhanced under light exposure, which triggers the migration of halide ions away from illuminated regions, eventually leading to a strongly anisotropic degradation. Our work points to the need for performing an optical quality test of individual crystallites prior to their use in optoelectronics devices and provides a means to do so., Financial support of the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under Grant MAT2014-54852-R is gratefully acknowledged. Y.L. acknowledges the financial support from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/under REA grant agreement no. 622533., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluorescent humidity sensors based on photonic resonators

  • Szendrei, Katalin
  • Jiménez-Solano, Alberto
  • Lozano, Gabriel
  • Lotsch, Bettina V.
  • Míguez, Hernán
Among the different approaches to humidity sensing available, those based on fluorescent signals are gathering a great deal of attention due to their fast response and versatility of detection and design. So far, all proposals have focused on the use of luminescent probes whose emission is either triggered or inhibited by the presence of water that reacts or alters their chemical environment, hence inducing the signal change. Here, a novel concept in fluorescent humidity sensing based on combining stimuli-responsive photonic resonators with molecular fluorescent probes is introduced. The resonator is assembled from humidity-swellable antimony phosphate nanosheets embedding a planar light-emitting probe, whose emission is dramatically modified by the changes that ambient humidity causes in its photonic environment. Guided by “in silico” optical design of the resonator architecture and subsequent experimental realization, two embodiments of fluorescent photonic humidity sensors featuring turn-on and turn-off detection schemes are presented. The interplay between the luminescent properties of an emitter and its photonic environment implies a fundamental advantage as the emitters are not chemically altered during the detection process. At the same time, it paves the way toward a new generation of photonic humidity sensors which can conveniently be interfaced with common fluorescence detection schemes., Financial support granted by the Max Planck Society, the University of Munich (LMU), the Center for NanoScience (CeNS), the Deutsche Forschungsgemeinschaft (DFG) through the Cluster of Excellence Nanosystems Initiative Munich (NIM), the European Research Council under the European Union's Seventh Framework Programme (FP7/2007‐2013)/ERC Grant Agreement No. 307081 (POLIGHT), and the Spanish Ministry of Economy and Competitiveness under grant MAT2014‐54852‐R is gratefully acknowledged. A.J.‐S. acknowledges the Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011‐23593.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexible and adaptable light-emitting coatings for arbitrary metal surfaces based on optical tamm mode coupling

  • Jiménez-Solano, Alberto
  • Galisteo-López, Juan F.
  • Míguez, Hernán
This study demonstrates a design that maximizes the power radiated into free space from a monolayer of nanoemitters embedded in a flexible distributed Bragg reflector conformably attached to a metal surface. This is achieved by positioning the light source at the precise depth within the multilayer for which optical Tamm states provide enhanced quantum yield and outcoupling efficiency, which are combined to optimize the luminous power radiated by the surface of the ensemble. This approach, based on the adhesion of flexible multilayer stacks onto metal surfaces with an arbitrary curvature, is versatile and permits the realization of spectrally narrow monodirectional or self-focusing light-emitting surfaces., Financial support of the European Research Council under the European Union's Seventh Framework Programme (FP7/2007−2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014‐54852‐R was gratefully acknowledged. A.J.S. acknowledges the Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011‐23593., Peer reviewed
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Single-step fabrication process of 1-D photonic crystals coupled to nanocolumnar TiO2 layers to improve DSC efficiency

  • González-García, Lola
  • Colodrero, Silvia
  • Míguez García, Hernán Ruy
  • Rodríguez González-Elipe, Agustín
The present work proposes the use of a TiO2 electrode coupled to a one-dimensional photonic crystal (1DPC), all formed by the sequential deposition of nanocolumnar thin films by physical vapor oblique angle deposition (PV-OAD), to enhance the optical and electrical performance of DSCs while transparency is preserved. We demonstrate that this approach allows building an architecture combining a non-dispersive 3 µm of TiO2 electrode and 1 µm TiO2-SiO2 1DPC, both columnar, in a single-step process. The incorporation of the photonic structure is responsible for a rise of 30% in photovoltaic efficiency, as compared with a transparent cell with a single TiO2 electrode. Detailed analysis of the spectral dependence of the photocurrent demonstrates that the 1DPC improves light harvesting efficiency by both back reflection and optical cavity modes confinement within the TiO2 films, thus increasing the overall performance of the cell, European Union FP7/2007- 2013, Ministerio de Economía y Competitividad CSD2008-00023, CSD2007-00007, MAT2011-23593, MAT2013-40852-R, MAT2013-42900-P, Junta de Andalucía TEP8067, FQM-6900, FQM 2265, FQM 579
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Environmental Effects on the Photophysics of Organic–Inorganic Halide Perovskites

  • Galisteo López, Juan Francisco
  • Anaya Martín, Miguel
  • Calvo Roggiani, Mauricio
  • Míguez García, Hernán Ruy
The photophysical properties of films of organic–inorganic lead halide perovskites under different ambient conditions are herein reported. We demonstrate that their luminescent properties are determined by the interplay between photoinduced activation and darkening processes, which strongly depend on the atmosphere surrounding the samples. We have isolated oxygen and moisture as the key elements in each process, activation and darkening, both of which involve the interaction with photogenerated carriers. These findings show that environmental factors play a key role in the performance of lead halide perovskites as efficient luminescent materials., Unión Europea FP7/2007-2013, Ministerio de Economía y Competitividad MAT2014-54852-R
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Flexible Distributed Bragg Reflectors from Nanocolumnar Templates

  • Calvo Roggiani, Mauricio
  • González García, Lola
  • Parra Barranco, Julián
  • Barranco Quero, Ángel
  • Jiménez Solano, Alberto
  • Rodríguez González-Elipe, Agustín
  • Míguez García, Hernán Ruy
A flexible distributed Bragg reflector is made by the infiltration of a nanocolumnar array with polydimethyl siloxane oligomers. The high optical reflectance displayed by the final material is a direct consequence of the high refractive index contrast of the columnar layers whereas the structural stability is due to the polymer properties., Unión Europea FP7 / 2007-2013, Ministerio de Economía y Competitividad MAT2011-23593, Ministerio de Economía y Competitividad MAT2013-42900-P, Junta de Andalucía FQM6900, Junta de Andalucía TEP8067, Convenio de subvención ERC 307081 (POLIGHT)
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Nanolevitation Phenomena in Real Plane-Parallel Systems Due to the Balance between Casimir and Gravity Forces

  • Esteso Carrizo, Victoria
  • Carretero Palacios, Sol
  • Míguez García, Hernán Ruy
We report on the theoretical analysis of equilibrium distances in real plane-parallel systems under the influence of Casimir and gravity forces at thermal equilibrium. Due to the balance between these forces, thin films of Teflon, silica, or polystyrene in a single-layer configuration and immersed in glycerol stand over a silicon substrate at certain stable or unstable positions depending on the material and the slab thickness. Hybrid systems containing silica and polystyrene, materials which display Casimir forces and equilibrium distances of opposite nature when considered individually, are analyzed in either bilayer arrangements or as composite systems made of a homogeneous matrix with small inclusions inside. For each configuration, equilibrium distances and their stability can be adjusted by fine-tuning of the volume occupied by each material. We find the specific conditions under which nanolevitation of realistic films should be observed. Our results indicate that thin films of real materials in plane-parallel configurations can be used to control suspension or stiction phenomena at the nanoscale., Unión Europea FP7 / 2007-2013, Ministerio de Economía y Competitividad de España MAT2011-23593
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Highly efficient perovskite solar cells with tunable structural color

  • Zhang, Wei
  • Anaya Martín, Miguel
  • Lozano Barbero, Gabriel Sebastián
  • Calvo Roggiani, Mauricio
  • Johnston, Michael B.
  • Míguez García, Hernán Ruy
  • Snaith, Henry J.
The performance of perovskite solar cells has been progressing over the past few years and efficiency is likely to continue to increase. However, a negative aspect for the integration of perovskite solar cells in the built environment is that the color gamut available in these materials is very limited and does not cover the green-to-blue region of the visible spectrum, which has been a big selling point for organic photovoltaics. Here, we integrate a porous photonic crystal (PC) scaffold within the photoactive layer of an opaque perovskite solar cell following a bottom-up approach employing inexpensive and scalable liquid processing techniques. The photovoltaic devices presented herein show high efficiency with tunable color across the visible spectrum. This now imbues the perovskite solar cells with highly desirable properties for cladding in the built environment and encourages design of sustainable colorful buildings and iridescent electric vehicles as future power generation sources., European Union FP7/ 2007-2013, Ministerio de Economía y Competitividad MAT2011-23593, Junta de Andalucía FQM5247
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Solution processed high refractive index contrast distributed Bragg reflectors

  • Anaya Martín, Miguel
  • Rubino, Andrea
  • Calvo Roggiani, Mauricio
  • Míguez García, Hernán Ruy
We have developed a method to alternate porous and dense dielectric films in order to build high refractive index contrast distributed Bragg reflectors (DBRs) capable of reflecting very efficiently in a targeted spectral range employing a small number of layers in the stack. Porous layers made of SiO2 nanoparticles and compact sol–gel processed TiO2 layers are sequentially deposited. The key to the preservation of porosity of every other layer during the deposition process is the use of a sacrificial layer of polystyrene that prevents the infiltration of the interstitial voids between nanoparticles with the homogeneous solution of TiO2 precursors. Our approach allows preparing a series of DBRs operating along the whole visible spectral range. Reflectance values as high as 90% are achieved from only seven layers. The particular distribution of porosity along one direction gives rise to an interesting interplay between the optical properties of the system and the vapor pressure in the surrounding atmosphere, which we foresee could be put into practice in gas sensing devices., España, Ministerio de Economía y Competitividad MAT2014 54852-R, España, European Union’s Seventh Framework Programme FP7/2007–2013)/ERC
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Optical analysis of CH3NH3SnxPb1–xI3 absorbers: a roadmap for perovskite-on-perovskite tandem solar cells

  • Anaya Martín, Miguel
  • Correa Baena, Juan P.
  • Lozano Barbero, Gabriel Sebastián
  • Saliba, Michael
  • Anguita, Pablo
  • Calvo Roggiani, Mauricio
  • Míguez García, Hernán Ruy
Organic–inorganic perovskite structures in which lead is substituted by tin are exceptional candidates for broadband light absorption. Herein we present a thorough analysis of the optical properties of CH3NH3SnxPb1–xI3 films, providing the field with definitive insights about the possibilities of these materials for perovskite solar cells of superior efficiency. We report a user's guide based on the first set of optical constants obtained for a series of tin/lead perovskite films, which was only possible to measure due to the preparation of optical quality thin layers. According to the Shockley–Queisser theory, CH3NH3SnxPb1–xI3 compounds promise a substantial enhancement of both short circuit photocurrent and power conversion efficiency in single junction solar cells. Moreover, we propose a novel tandem architecture design in which both top and bottom cells are made of perovskite absorbers. Our calculations indicate that such perovskite-on-perovskite tandem devices could reach efficiencies over 35%. Our analysis serves to establish the first roadmap for this type of cells based on actual optical characterization data. We foresee that this study will encourage the research on novel near-infrared perovskite materials for photovoltaic applications, which may have implications in the rapidly emerging field of tandem devices., Unión Europea Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT), España, Ministerio de Economía y Competitividad AT2014-54852- R.
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Optical Description of Mesostructured Organic-Inorganic Halide Perovskite Solar Cells

  • Anaya Martín, Miguel
  • Lozano Barbero, Gabriel Sebastián
  • Calvo Roggiani, Mauricio
  • Zhang, Wei
  • Johnston, Michael B.
  • Snaith, Henry J.
  • Míguez García, Hernán Ruy
Herein we describe both theoretically and experimentally the optical response of solution-processed organic-inorganic halide perovskite solar cells based on mesostructured scaffolds. We develop a rigorous theoretical model using a method based on the propagation of waves in layered media, which allows visualizing the way in which light is spatially distributed across the device and serves to quantify the fraction of light absorbed by each medium comprising the cell. The discrimination between productive and parasitic absorption yields an accurate determination of the internal quantum efficiency. State-of-the-art devices integrating 2 mesoporous scaffolds infiltrated with perovskite are manufactured and characterized to support the calculations. This combined experimental and theoretical analysis provides a rational understanding of the optical behavior of perovskite cells, and can be beneficial for the judicious design of devices with improved performance. Notably, our model justifies the presence of a solid perovskite capping layer in all the highest efficiency perovskite solar cells based on thinner mesoporous scaffolds, Unión Europea Seventh Framework Programme FP7/2007-2013, España, Ministerio de Economía y Competitividad MAT2011-23593
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Photophysical Analysis of the Formation of Organic–Inorganic Trihalide Perovskite Films: Identification and Characterization of Crystal Nucleation and Growth

  • Anaya Martín, Miguel
  • Galisteo López, Juan Francisco
  • Calvo Roggiani, Mauricio
  • López, Cefe
  • Míguez García, Hernán Ruy
In this work we demonstrate that the different processes occurring during hybrid organic–inorganic lead iodide perovskite film formation can be identified and analyzed by a combined in situ analysis of their photophysical and structural properties. Our observations indicate that this approach permits unambiguously identifying the crystal nucleation and growth regimes that lead to the final material having a cubic crystallographic phase, which stabilizes to the well-known tetragonal phase upon cooling to room temperature. Strong correlation between the dynamic and static photoemission results and the temperature-dependent X-ray diffraction data allows us to provide a description and to establish an approximate time scale for each one of the stages and their evolution. The combined characterization approach herein explored yields key information about the kinetics of the process, such as the link between the evolution of the defect density during film formation, revealed by a fluctuating photoluminescence quantum yield, and the gradual changes observed in the PbI2-related precursor structure., Unión Europea Seventh Framework Programme (FP7/2007-2013)/ERC Grant Agreement No. 307081 (POLIGHT), España, Ministerio de Economía y Competitividad Grants MAT2014- 54852-R and MAT2012-31659, España, Comunidad de Madrid programme S2013/MIT-2740
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Resonant Photocurrent Generation in Dye-Sensitized Periodically Nanostructured Photoconductors by Optical Field Confinement Effects

  • Anaya Martín, Miguel
  • Luque Raigón, J M
  • Míguez García, Hernán Ruy
Herein we show experimental evidence of resonant photocurrent generation in dye-sensitized periodically nanostructured photoconductors, which is achieved by spectral matching of the sensitizer absorption band to different types of localized photon modes present in either periodic or broken symmetry structures. Results are explained in terms of the calculated spatial distribution of the electric field intensity within the configurations under analysis., Unión Europea FP7 / 2007-2013, Convenio de subvención ERC 307081 (POLIGHT), Ministerio de Economía y Competitividad MAT2011- 23593, CONSOLIDER HOPE CSD2007-00007, Junta de Andalucía FQM3579, Junta de Andalucía FQM5247
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Electron injection and scaffold effects in perovskite solar cells

  • Anaya Martín, Miguel
  • Calvo Roggiani, Mauricio
  • Míguez García, Hernán Ruy
  • Yuelong Li
  • Clasen Hames, Bruno
  • Fabregat Santiago, Francisco
  • Mora Seró, Iván
  • Zhang, Wei
  • Snaith, Henry J.
In spite of the impressive efficiencies reported for perovskite solar cells (PSCs), key aspects of their working principles, such as electron injection at the contacts or the suitability of the utilization of a specific scaffold layer, are not yet fully understood. Increasingly complex scaffolds attained by the sequential deposition of TiO2 and SiO2 mesoporous layers onto transparent conducting substrates are used to perform a systematic characterization of both the injection process at the electron selective contact and the scaffold effect in PSCs. By forcing multiple electron injection processes at a controlled sequence of perovskite–TiO2 interfaces before extraction, interfacial injection effects are magnified and hence characterized in detail. An anomalous injection behavior is observed, the fingerprint of which is the presence of significant inductive loops in the impedance spectra with a magnitude that correlates with the number of interfaces in the scaffold. Analysis of the resistive and capacitive behavior of the impedance spectra indicates that the scaffolds could hinder ion migration, with positive consequences such as lowering the recombination rate and implications for the current–potential curve hysteresis. Our results suggest that an appropriate balance between these advantageous effects and the unavoidable charge transport resistive losses introduced by the scaffolds will help in the optimization of PSC performance., Unión Europea 7PM / 2007-2013, Unión Europea ERC 307081 (POLIGHT), Ministerio de Economía y Competitividad de España MAT2014-54852-R, Ministerio de Economía y Competitividad de España MAT2015-70611-ERC
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Strong Quantum Confinement and Fast Photoemission Activation in CH3NH3PbI3 Perovskite Nanocrystals Grown within Periodically Mesostructured Films

  • Anaya Martín, Miguel
  • Rubino, Andrea
  • Rojas Ruiz, Teresa Cristina
  • Galisteo López, Juan Francisco
  • Calvo Roggiani, Mauricio
  • Míguez García, Hernán Ruy
In this Communication, a synthetic route is demonstrated to obtain stabilized MAPbI3 nanocrystals embedded in thin metal oxide films that display well-defined and adjustable quantum confinement effects over a wide range of 0.34 eV. Mesostructured TiO2 and SiO2 films displaying an ordered 3D pore network are prepared by evaporation-induced self-assembly of a series of organic supramolecular templates in the presence of metal oxide precursors. The pores in the inorganic films obtained after thermal annealing are then used as nanoreactors to synthesize MAPbI3 crystallites with narrow size distribution and average radius comprised between 1 and 4 nm, depending on the template of choice. Both the static and dynamic photoemission properties of the ensemble display features distinctive of the regime of strong quantum confinement. Photoemission maps demonstrate that the spectral and intensity properties of the luminescence extracted from the perovskite quantum dot loaded films are homogeneous over squared centimeters areas. At variance with their bulk counterparts, constant emission intensity is reached in time scales at least four orders of magnitude shorter., Unión Europea European Union's Seventh Framework Programme FP7/2007-2013)/ERC Grant Agreement No. 307081 (POLIGHT), España, Ministerio de Economía y Competitividad MAT2014-54852-R
idUS. Depósito de Investigación de la Universidad de Sevilla
Publication Artículo científico (JournalArticle)

Absorption Enhancement in Organic−Inorganic Halide Perovskite Films with Embedded Plasmonic Gold Nanoparticles

  • Carretero Palacios, Sol
  • Calvo Roggiani, Mauricio
  • Míguez García, Hernán Ruy
We report on the numerical analysis of solar absorption enhancement in organic−inorganic halide perovskite films embedding plasmonic gold nanoparticles. The effect of particle size and concentration is analyzed in realistic systems in which random particle location within the perovskite film and the eventual formation of dimers are also taken into account. We find a maximum integrated solar absorption enhancement of ∼10% in perovskite films of 200 nm thickness and ∼6% in 300 nm films, with spheres of radii 60 and 90 nm, respectively, in volume concentrations of around 10% in both cases. We show that the presence of dimers boosts the absorption enhancement up to ∼12% in the thinnest films considered. Absorption reinforcement arises from a double contribution of plasmonic near-field and scattering effects, whose respective weight can be discriminated and evaluated from the simulations., Unión Europea FP7/ 2007−2013, Ministerio de Economía y Competitividad MAT2014-54852-R