Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Diamond-coated silicon nanowires for enhanced micro-supercapacitor with ionic liquids

  • Gund, Girish S.|||0000-0002-2301-6051
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Aradilla, David|||0000-0002-8532-0323
  • Mueller-Sebert, Wolfgang
  • Bidan, Gérard
  • Gaboriau, D.
  • Gentile, Pascal|||0000-0002-1547-4247
  • Schubert, Thomas J. S.
  • Wimberg, Jan
  • Sadki, Saïd
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Silicon nanowires (SiNWs) and diamond-coated SiNWs (D@SiNWs) on highly n-doped silicon wafer substrates were prepared through standard chemical vapor deposition (CVD) method as electrodes for micro-supercapacitors. The surface of electrodes exhibited uniform distribution of SiNWs on silicon wafer and continuous diamond coating on SiNWs. Electrochemical measurements were carried out in order to test the combined effect of using Ionic Liquid electrolytes and diamond coating on SiNWs on energy storage performance. Optimal values of areal capacitance, energy density and power densities were 317 μF cm, 0.13 μWh cm and 150 μW cm, respectively. So, the work reported here confirms the suitability and compatibility of D@SiNWs electrode materials and ionic liquid electrolytes for the fabrication of high-performing and robust micro-supercapacitors.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An innovative 3-D nanoforest heterostructure made of polypyrrole coated silicon nanotrees for new high performance hybrid micro-supercapacitors

  • Aradilla, David
  • Bidan, Gérard
  • Gentile, Pascal
  • Dubal, Deepak P.
  • Gómez-Romero, P.
  • Wimberg, Jan
  • Schubert, Thomas J. S.
  • Sadki, Saïd
In this work, an innovative 3-D symmetric micro-supercapacitor based on polypyrrole (PPy) coated silicon nanotree (SiNTr) hybrid electrodes has been fabricated. First, SiNTrs were grown on silicon substrates by chemical vapor deposition (CVD) and then via an electrochemical method, the conducting polymer coating was deposited onto the surface of SiNTr electrodes. This study illustrates the excellent electrochemical performance of a hybrid micro-supercapacitor device using the synergistic combination of both PPy as the electroactive pseudo-capacitive material and branched SiNWs as the electric double layer capacitive material in the presence of an aprotic ionic liquid (N-methyl-N-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide; PYR13TFSI) as the electrolyte. The hybrid device exhibited a specific capacitance as high as ∼14 mF cm−2 and an energy density value of ∼15 mJ cm−2 at a wide cell voltage of 1.5 V using a high current density of 1 mA cm−2. Furthermore, a remarkable cycling stability after thousands of galvanostatic charge–discharge cycles with a loss of approximately 30% was obtained. The results reported in this investigation demonstrated that PPy coated SiNTr-based micro-supercapacitors exhibit the best performances among hybrid micro-supercapacitors made of silicon nanowire electrodes grown by CVD in terms of specific capacitance and energy density., This project has received funding from the European Union's Seventh Program for Research, Technological Development and Demonstration under Grant agreement no. 309143 (2012–2015). Dorian Gaboriau thanks the 'Délégation Générale pour l'Armament' (DGA) and the CEA for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel hybrid micro-supercapacitor based on conducting polymer coated silicon nanowires for electrochemical energy storage

  • Aradilla, David
  • Bidan, Gérard
  • Gentile, Pascal
  • Gómez-Romero, P.
  • Schubert, Thomas J. S.
  • Sadki, Saïd
The development of a novel hybrid symmetric micro-supercapacitor based on poly(3,4-ethylenedioxythiophene) coated silicon nanowires using an ionic liquid (N-methyl-N-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide) as an electrolyte has been demonstrated. The hybrid supercapacitor device was able to deliver a specific energy of 10 W h kg-1 and a maximal power density of 85 kW kg-1 at a cell voltage of 1.5 V. The hybrid device exhibited long lifetime and an outstanding electrochemical stability retaining 80% of the initial capacitance after thousands of galvanostatic charge-discharge cycles at a high current density of 1 mA cm-2. The improvement of the capacitive properties compared with the bare SiNWs was attributed to the pseudo-capacitive behavior induced by the conducting polymer coating., The authors acknowledge the CEA for financial support of this work. This project has received funding from the European Union's Seventh Programme for research, technological development and demonstration under grant agreement no. 309143 (2012–2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High performance of symmetric micro-supercapacitors based on silicon nanowires using N-methyl-N-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide as electrolyte

  • Aradilla, David
  • Gentile, Pascal
  • Bidan, Gérard
  • Ruiz Ruiz, Vanesa
  • Gómez-Romero, P.
  • Schubert, Thomas J. S.
  • Sadki, Saïd
This work describes the development and performance of a symmetric micro-supercapacitor made of nanostructured electrodes based on silicon nanowires (SiNWs) deposited using chemical vapor deposition (CVD) on silicon substrates. The performance of the SiNWs micro-supercapacitor employing an aprotic ionic liquid (N-methyl-N-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide) (PYR13TFSI) as an electrolyte was able to deliver a maximal power density of 182mWcm-2 and a specific energy of 190μJcm-2 operating at a wide cell voltage of 4V with a quasi-ideal capacitive behavior. The lifetime of the device exhibited a remarkable electrochemical stability retaining 75% of the initial capacitance after several million galvanostatic charge-discharge cycles at a high current density of 1mAcm-2. Furthermore, a coulombic efficiency of approximately 99% was obtained after galvanostatic cycling test without structural degradation on the morphology of SiNWs., The authors acknowledge the CEA for financial support of this work. This project has received funding from the European Union׳s Seventh Program for Research, Technological Development and Demonstration under Grant agreement no. 309143 (2012–2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Aqueous synthesis of LiFePO4 with fractal granularity

  • Caban-Huertas, Zahilia
  • Ayyad, Omar
  • Dubal, Deepak P.
  • Gómez-Romero, P.
Lithium iron phosphate (LiFePO4) electrodes with fractal granularity are reported. They were made from a starting material prepared in water by a low cost, easy and environmentally friendly hydrothermal method, thus avoiding the use of organic solvents. Our method leads to pure olivine phase, free of the impurities commonly found after other water-based syntheses. The fractal structures consisted of nanoparticles grown into larger micro-sized formations which in turn agglomerate leading to high tap density electrodes, which is beneficial for energy density. These intricate structures could be easily and effectively coated with a thin and uniform carbon layer for increased conductivity, as it is well established for simpler microstructures. Materials and electrodes were studied by means of XRD, SEM, TEM, SAED, XPS, Raman and TGA. Last but not least, lithium transport through fractal LiFePO4 electrodes was investigated based upon fractal theory. These water-made fractal electrodes lead to high-performance lithium cells (even at high rates) tested by CV and galvanostatic charge-discharge, their performance is comparable to state of the art (but less environmentally friendly) electrodes., Funding from the E C Seventh Framework program (FP7/2007-2013) under grant Agreement 266090 (SOMABAT) is gratefully acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Authors appreciate the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) for Catalan system of science and technology, Spain. We thank AGAUR (Generalitat de Catalunya) for project NESTOR Nanomaterials for Energy STORage. 2014_SGR_1505., EUR 1,165 APC fee funded by the EC FP7 Post-Grant Open Access Pilot, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

SiNWs-based electrochemical double layer micro-supercapacitors with wide voltage window (4V) and long cycling stability using a protic ionic liquid electrolyte

  • Aradilla, David|||0000-0002-8532-0323
  • Gentile, Pascal|||0000-0002-1547-4247
  • Ruiz, Vanesa
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Wimberg, Jan
  • Iliev, Boyan
  • Schubert, Thomas J. S.
  • Sadki, Saïd
  • Bidan, Gérard
The present work reports the use and application of a novel protic ionic liquid (triethylammonium bis(tri fluoromethylsulfonyl)imide; NEtH TFSI) as an electrolyte for symmetric planar micro-supercapacitors based on silicon nanowire electrodes. The excellent performance of the device has been successfully demonstrated using cyclic voltammetry, galvanostatic charge-discharge cycles and electrochemical impedance spectroscopy. The electrochemical characterization of this system exhibits a wide operative voltage of 4 V as well as an outstanding long cycling stability after millions of galvanostatic cycles at a high current density of 2 mA cm. In addition, the electrochemical double layer micro-supercapacitor was able to deliver a high power density of 4 mWcm in a very short time pulses (a few ms). Our results could be of interest to develop prospective on-chip micro-supercapacitors using protic ionic liquids as electrolytes with high performance in terms of power and energy densities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3D hierarchical assembly of ultrathin MnO₂ nanoflakes on silicon nanowires for high performance micro-supercapacitors in Li-doped ionic liquid

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Aradilla, David|||0000-0002-8532-0323
  • Bidan, Gérard
  • Gentile, Pascal|||0000-0002-1547-4247
  • Schubert, Thomas J. S.
  • Wimberg, Jan
  • Sadki, Saïd
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Building of hierarchical core-shell hetero-structures is currently the subject of intensive research in the electrochemical field owing to its potential for making improved electrodes for high-performance micro-supercapacitors. Here we report a novel architecture design of hierarchical MnO₂@silicon nanowires (MnO₂@SiNWs) hetero-structures directly supported onto silicon wafer coupled with Li-ion doped 1-Methyl-1-propylpyrrolidinium bis(trifluromethylsulfonyl)imide (PMPyrrBTA) ionic liquids as electrolyte for micro-supercapacitors. A unique 3D mesoporous MnO₂@SiNWs in Li-ion doped IL electrolyte can be cycled reversibly across a voltage of 2.2V and exhibits a high areal capacitance of 13mFcm⁻². The high conductivity of the SiNWs arrays combined with the large surface area of ultrathin MnO₂ nanoflakes are responsible for the remarkable performance of these MnO₂@SiNWs hetero-structures which exhibit high energy density and excellent cycling stability. This combination of hybrid electrode and hybrid electrolyte opens up a novel avenue to design electrode materials for high-performance micro-supercapacitors.