Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

III-nitride-based waveguides for ultrafast all-optical signal processing at 1.55 μm

  • Monteagudo-Lerma, L.
  • Naranjo, Fernando B.
  • Valdueza-Felip, S.
  • Jiménez-Rodríguez, M.
  • Monroy, E.
  • Postigo, Pablo Aitor
  • Corredera, Pedro
  • González-Herráez, Miguel
7 págs.; 9 figs., We present an overview of the recently developed III-nitride-based optical waveguides for application in ultrafast signal processing at telecom wavelengths. We focus on different active and passive optical devices for further implementation within all-optical integrated circuits. Optical waveguides based on GaN/AlN quantum dots have been demonstrated to act as saturable absorbers requiring ∼3 pJ of input pulse energy to reach +3 dB transmittance contrast for TM-polarized light. On the contrary, sputtered-InN-based devices show -3 dB transmittance contrast associated to two-photon absorption for input pulse energies of ∼1 pJ, making them suitable to act as highly-efficient reverse saturable absorbers. Finally, the passive optical nature of waveguides based on sputtered AlN at 1.55 μm makes them suitable for further connections between different III-nitride-based active devices. Similar to the development of electronic integrated circuits, photonic integrated circuits are being widely investigated to implement active and passive optical functions in different material platforms. III-nitrides on sapphire substrates emerge as efficient all-optical solutions within the photonic integrated circuit presenting high nonlinear behavior and ultrafast response. These heterostructures make possible the full exploitation of the optical fiber bandwidth which is highly required in today's globalized world. ß 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, This work was supported by the Spanish Government projects TEC2012-37958-C02-01 and 02,the Comunidad de Madrid projects S2009/ESP-178 and S2013/MIT-2790, the University of Alcalá project CCG2013/EXP-052,the EU Marie Curie IEF “SolarIn” (#331745) project, and the EUERC-StG “TeraGaN” (#278428) project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Morphology and arrangement of InN nanocolumns deposited by radio-frequency sputtering: effect of the buffer layer

  • Monteagudo-Lerma, L.
  • Valdueza-Felip, S.
  • Núñez-Cascajero, A.
  • Ruiz, A.
  • González-Herráez, Miguel
  • Monroy, E.
  • Naranjo, Fernando B.
We present the structural and optical properties of (0001)-oriented nanocolumnar films of InN deposited on c-sapphire substrates by radio-frequency reactive sputtering. It is observed that the column density and dimensions are highly dependent on the growth parameters of the buffer layer. We investigate four buffer layers consisting of (i) 30 nm of low-growth-rate InN, (ii) 30 nm of AlN deposited on the unbiased substrate (us), (iii) 30 nm of AlN deposited on the reverse-biased substrate (bs), and (iv) a 60-nm-thick bilayer consisting of 30-nm-thick bs-AlN deposited on top of 30-nm-thick us-AlN. Differences in the layer nucleation process due to the buffer layer induce variations of the column density in the range of (2.5-16)×10 cm, and of the column diameter in the range of 87-176 nm. Best results in terms of mosaicity are obtained using the bs-AlN buffer layer, which leads to a full width at half-maximum of the InN(0002) rocking curve of 1.2°. A residual compressive strain is still present in the nanocolumns. All samples exhibit room temperature photoluminescence emission at ∼1.6 eV, and an apparent optical band gap at ∼1.7 eV estimated from linear optical transmittance measurements., Partial financial support was provided by the Spanish Government project TEC2012-37958-C02-01, the Comunidad de Madrid project S2013/MIT-2790, the Universidad de Alcalá project CCG2014/EXP-051, and the Marie Curie IEF grant “SolarIn” (#331745).
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Study of high In-content AlInN deposition on p-Si (111) by RF-sputtering

  • Núñez Cascajero, Arántzazu
  • Monteagudo Lerma, Laura
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Navío, C.
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
In this work, we investigate the effects of deposition conditions on the structural and morphological properties of AlInN thin films deposited on p-doped Si(111) substrates by reactive radio-frequency sputtering. The aluminum composition can be tuned in the 0 to 0.36 range by changing the power applied to the aluminum target. Al incorporation leads to a change in the layer morphology and improvement of the rms surface roughness of the layers. The compact Al0.36In0.64N sample grown at 550 °C exhibits intense room-temperature photoluminescence centered at 1.75 eV., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

III-nitride-based waveguides for ultrafast all-optical signal processing at 1.55 μm

  • Monteagudo Lerma, Laura
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Jiménez Rodríguez, Marco
  • Monroy, Eva
  • Postigo, P.A.
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
We present an overview of the recently developed III-nitride-based optical waveguides for application in ultrafast signal processing at telecom wavelengths. We focus on different active and passive optical devices for further implementation within all-optical integrated circuits. Optical waveguides based on GaN/AlN quantum dots have been demonstrated to act as saturable absorbers requiring ∼3 pJ of input pulse energy to reach +3 dB transmittance contrast for TM-polarized light. On the contrary, sputtered-InN-based devices show -3 dB transmittance contrast associated to two-photon absorption for input pulse energies of ∼1 pJ, making them suitable to act as highly-efficient reverse saturable absorbers. Finally, the passive optical nature of waveguides based on sputtered AlN at 1.55 μm makes them suitable for further connections between different III-nitride-based active devices. Similar to the development of electronic integrated circuits, photonic integrated circuits are being widely investigated to implement active and passive optical functions in different material platforms. III-nitrides on sapphire substrates emerge as efficient all-optical solutions within the photonic integrated circuit presenting high nonlinear behavior and ultrafast response. These heterostructures make possible the full exploitation of the optical fiber bandwidth which is highly required in today's globalized world. © 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Morphology and arrangement of InN nanocolumns deposited by radio-frequency sputtering: Effect of the buffer layer

  • Monteagudo Lerma, Laura
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Núñez Cascajero, Arántzazu
  • Ruiz, A.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Monroy, Eva
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
We present the structural and optical properties of (0001)-oriented nanocolumnar films of InN deposited on c-sapphire substrates by radio-frequency reactive sputtering. It is observed that the column density and dimensions are highly dependent on the growth parameters of the buffer layer. We investigate four buffer layers consisting of (i) 30 nm of low-growth-rate InN, (ii) 30 nm of AlN deposited on the unbiased substrate (us), (iii) 30 nm of AlN deposited on the reverse-biased substrate (bs), and (iv) a 60-nm-thick bilayer consisting of 30-nm-thick bs-AlN deposited on top of 30-nm-thick us-AlN. Differences in the layer nucleation process due to the buffer layer induce variations of the column density in the range of (2.5-16)×109 cm-2, and of the column diameter in the range of 87-176 nm. Best results in terms of mosaicity are obtained using the bs-AlN buffer layer, which leads to a full width at half-maximum of the InN(0002) rocking curve of 1.2°. A residual compressive strain is still present in the nanocolumns. All samples exhibit room temperature photoluminescence emission at ∼1.6 eV, and an apparent optical band gap at ∼1.7 eV estimated from linear optical transmittance measurements., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

In-rich AlxIn1-xN grown by RF-sputtering on sapphire: From closely-packed columnar to high-surface quality compact layers

  • Núñez Cascajero, Arántzazu
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Monteagudo Lerma, Laura
  • Monroy, Eva
  • Taylor-Shaw, E.
  • Martin, R.W.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
The structural, morphological, electrical and optical properties of In-rich AlxIn1-xN (0 < x < 0.39) layers grown by reactive radio-frequency (RF) sputtering on sapphire are investigated as a function of the deposition parameters. The RF power applied to the aluminum target (0 W-150 W) and substrate temperature (300 °C-550 °C) are varied. X-ray diffraction measurements reveal that all samples have a wurtzite crystallographic structure oriented with the c-axis along the growth direction. The aluminum composition is tuned by changing the power applied to the aluminum target while keeping the power applied to the indium target fixed at 40 W. When increasing the Al content from 0 to 0.39, the room-temperature optical band gap is observed to blue-shift from 1.76 eV to 2.0 eV, strongly influenced by the Burstein-Moss effect. Increasing the substrate temperature, results in an evolution of the morphology from closely-packed columnar to compact. For a substrate temperature of 500 °C and RF power for Al of 150 W, compact Al0.39In0.61N films with a smooth surface (root-mean-square surface roughness below 1 nm) are produced., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá