Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmental-Benign Catalysts for Selective Catalytic Reduction with Ammonia (NH3-SCR) Supported on Natural Clinoptilolite Prepared by Solution Combustion Synthesis Method

  • Szymaszek-Wawryca, Agnieszka
  • Summa, Paulina
  • Kasek, Maria
  • Duraczynska, Dorota
  • Samojeden, Bogdan
  • Motak, Monika
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The presented research evidenced that natural zeolite, clinoptilolite performs very well as a support of NH3-SCR catalyst. The material was modified with iron or/and copper by solution combustion synthesis method. Fe-modified clinoptilolite showed excellent catalytic performance above 350 degrees C, due to the abundance of oligomeric iron species. On the other hand, relatively poor activity of the sample in the low temperature region resulted from the presence of pore-blocking aggregates of Fe2O3. In contrast to Fe-, the conversion of NO for Cu-modified sample reached 100% at ca. 225 degrees C, confirming outstanding low temperature activity of copper species. This effect was assigned to good dispersion of Cu and the presence of acid sites of medium strength, which were absent in Fe-Clin. However, these sites could possibly promote non-selective reaction of ammonia oxidation, thus, consumption of the reducing agent and generation of N2O. Considering the respective advantages of iron and copper active sites, we prepared bimetallic sample to design catalytic system which is more efficient in a broader temperature window. The results obtained for the FeCu-Clin sample indicated that co-existence of Fe and Cu contributed to low temperature activity due to [Cu(OH)]+ and lowered the formation of N2O due to oligomeric iron species. Such result was also ascribed to the generation of appropriate number of acid sites of medium strength delivered by copper., A.S.-W. gratefully acknowledges the financial support of the research from the National Science Centre Grant, Preludium 19 (no. 2020/37/N/ST5/00186). M.M. would like to kindly acknowledge the AGH Grant "Excellence Initiative- Research University" (no. 501.696.7996) for financial support. B.S. is thankful to the AGH Grant (no. 16.16.210.476) for funding the publication. U.D. acknowledges the support from the Government of Spain through the project PID2020-112590GB-C21/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic Performance of One-Pot Synthesized Fe-MWW Layered Zeolites (MCM-22, MCM-36, and ITQ-2) in Selective Catalytic Reduction of Nitrogen Oxides with Ammonia

  • Szymaszek-Wawryca, Agnieszka
  • Samojeden, Bogdan
  • Motak, Monika
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The application of layered zeolites of MWW topology in environmental catalysis has attracted growing attention in recent years; however, only a few studies have explored their performance in selective catalytic reduction with ammonia (NH3-SCR). Thus, our work describes, for the first time, the one-pot synthesis of Fe-modified NH3-SCR catalysts supported on MCM-22, MCM-36, and ITQ-2. The calculated chemical composition of the materials was Si/Al of 30 and 5 wt.% of Fe. The reported results indicated a correlation between the arrangement of MWW layers and the form of iron in the zeolitic structure. We have observed that one-pot synthesis resulted in high dispersion of Fe3+ sites, which significantly enhanced low-temperature activity and prevented N2O generation during the reaction. All of the investigated samples exhibited almost 100% NO conversion at 250 degrees C. The most satisfactory activity was exhibited by Fe-modified MCM-36, since 50% of NO reduction was obtained at 150 degrees C for this catalyst. This effect can be explained by the abundance of isolated Fe3+ species, which are active in low-temperature NH3-SCR. Additionally, SiO2 pillars present in MCM-36 provided an additional surface for the deposition of the active phase., Agnieszka Szymaszek-Wawryca gratefully acknowledges the financial support of the research from the National Science Centre Grant, Preludium 19 (no. 2020/37/N/ST5/00186). Monika Motak would like to kindly acknowledge AGH Grant "Excellence Initiative-Research University" (no. 501.696.7996) for the financial support. Bogdan Samojeden is thankful to AGH Grant (no. 16.16.210.476) for the foundation of the publication. Urbano Diaz acknowledges the support from the Government of Spain through the project PID2020-112590GB-C21/AEI/10.13039/501100011033.