Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

El papel de la evapotranspiración en la distribución funcional foliar de 28 especies del género Quercus de España y México, The role of evapotranspiration on the foliar functional distribution of 28 Quercus species from Mexico and Spain

  • García de la Riva, Enrique
  • Arenas Navarro, Maribel
  • Villar Montero, Rafael
  • García-Oliva, Felipe
  • Oyama Nakagawa, Alberto Ken
Incluido en el volumen Redes tróficas en sistemas agrarios, [ES] El género Quercus constituye el grupo de especies leñosas más importante del hemisferio norte, con una amplia distribución tanto en España como en México. El estudio de sus rasgos funcionales nos permite conocer su grado de diversificación y su adaptación al medio, así como las limitaciones morfológicas y fisiológicas que restringen su evolución. El principal objetivo del presente estudio es comprender como se segregan los rasgos funcionales foliares dentro del género Quercus, y que factores determinan dicha segregación. Para ello hemos medido cinco rasgos foliares en un total de 28 especies del generó Quercus de España y México a lo largo de un gradiente de evapotranspiración potencial. Nuestros resultados muestran dos dimensiones independientes de variación funcional foliar: por un lado, las especies se distribuyen de acuerdo con el espectro de economía foliar a lo largo del gradiente de humedad edáfica, encontrándose las especies más conservativas en el uso de recursos en regiones con mayor evapotranspiración potencial y las especies más adquisitivas en zonas con menor evapotranspiración. Por otro lado, el tamaño foliar esta principalmente condicionado por el origen geográfico de las especies. Estos resultados sugieren que las variaciones evolutivas dentro de un mismo linaje están asociadas a la variación coordinada de sus rasgos, siendo la humedad un factor clave en la variación funcional del género Quercus. Además, destacar que no se aprecia relación entre la longevidad foliar y el espectro de economía foliar, lo cual podría deberse a que la historia evolutiva del hábito foliar en los robles de ambos países ha sido diferente, [EN] Quercus species represent the most important woody genus in the northern hemisphere, with broad environmental distribution in Spain and Mexico. Functional plant traits are commonly used as indicators of species diversification and environmental adaptations, and they allow us to better understand the morphological and physiological limitations of the species that restrict its evolution. The main objective of this study is to explore the spectrum of variation of Quercus genus, by analyzing the variation in five functional leaf traits of 28 Quercus species from Spain and Mexico along an environmental gradient of potential evapotranspiration. We found two major dimensions of functional variation: on one hand, the species are segregating along the humidity gradient according with the leaf economics spectrum. Therefore, we found species associated to a conservative use of resources in areas with higher evapotranspiration rate and acquisitive species in the areas with lower evapotranspiration. On the other hand, the leaf size is mainly determined by the geographical origin of the species. These results suggest that the evolutionary modifications within the same genus are related with the leaf traits variation, being humidity a key factor of functional trait variation within the Quercus genus. In addition, we would like to highlight that we do not find relationship between leaf longevity and leaf economic spectrum, which may be explained by the different evolutionary histories of the leaf habit in oaks between both countries, SI, Este trabajo estuvo parcialmente financiado por los proyectos del Ministerio de Economía y Competitividad (Gobierno de España) DIVERBOS (CGL2011-30285-C02-523 02) y ECO-MEDIT (CGL2014-53236-R) y fondos FEDER
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Insulin dosage optimization based on prediction of postprandial glucose excursions under uncertain parameters and food intake

  • García Jaramillo, Maira Alejandra
  • Calm, R.
  • Tarin, C.
  • Vehi, J.
  • Bondía Company, Jorge|||0000-0001-7286-3719
Considering the difficulty in selecting correct insulin doses and the problem of hyper- and hypoglycemia episodes in type 1 diabetes, dosage-aid systems are very useful for these patients. A model-based approach to this problem must unavoidably consider uncertainty sources such as large intra-patient variability and food intake. In the present study, postprandial glucose is predicted considering this uncertain information using modal interval analysis. This approach calculates a safer prediction of possible hyper- and hypoglycemia episodes induced by insulin therapy for an individual patient's parameters and integrates this information into a dosage-aid system. Predictions of a patient's postprandial glucose at 5-h intervals are used to predict the risk for a given therapy. Then the insulin dose and injection-to-meal time with the lowest risk are calculated. The method has been validated for three different scenarios corresponding to preprandial glucose values of 100, 180 and 250 mg/dl., This work was partially supported by the Spanish Ministry of Science and Innovation and the European Union through grant DPI-2007-66728 and by the Autonomous Government of Catalonia through SGR00523.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the computational effort of set-inversion-based prandial insulin delivery for its integration in insulin pumps

  • León-Vargas, Fabián
  • Calm, Remei
  • Vehí, Josep
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Objective: Set-inversion-based prandial insulin delivery is a new model-based bolus advisor for postprandial glucose control in type 1 diabetes mellitus (T1DM). It automatically coordinates the values of basal-bolus insulin to be infused during the postprandial period so as to achieve some predefined control objectives. However, the method requires an excessive computation time to compute the solution set of feasible insulin profiles, which impedes its integration into an insulin pump. In this work, a new algorithm is presented, which reduces computation time significantly and enables the integration of this new bolus advisor into current processing features of smart insulin pumps. Methods: A new strategy was implemented that focused on finding the combined basal-bolus solution of interest rather than an extensive search of the feasible set of solutions. Analysis of interval simulations, inclusion of physiological assumptions, and search domain contractions were used. Data from six real patients with T1DM were used to compare the performance between the optimized and the conventional computations. Results: In all cases, the optimized version yielded the basal-bolus combination recommended by the conventional method and in only 0.032% of the computation time. Simulations show that the mean number of iterations for the optimized computation requires approximately 3.59 s at 20 MHz processing power, in line with current features of smart pumps. Conclusions: A computationally efficient method for basal-bolus coordination in postprandial glucose control has been presented and tested. The results indicate that an embedded algorithm within smart insulin pumps is now feasible. Nonetheless, we acknowledge that a clinical trial will be needed in order to justify this claim., This work was partially supported by the Spanish Ministry of Science and Innovation through Grant DPI-2010-20764-C02 and by the Autonomous Government of Catalonia through Grant SGR 523. Fabian León-Vargas acknowledges the FI grants of Generalitat de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling canopy fuel and forest stand variables and characterizing the influence of thinning in the stand structure using airborne LiDAR, Estimación de variables de combustible de copa y de masa, caracterizando el efecto de las claras en su estructura usando LiDAR aerotransportado

  • Hevia, A.
  • Álvarez-González, J. G.
  • Ruiz-Fernández, E.
  • Prendes, C.
  • Ruiz-González, A. D.
  • Majada, J.
  • González-Ferreiro, E.
[EN] Forest fires are a major threat in NW Spain. The importance and frequency of these events in the area suggests the need for fuel management programs to reduce the spread and severity of forest fires. Thinning treatments can contribute for fire risk reduction, because they cut off the horizontal continuity of forest fuels. Besides, it is necessary to conduct a fire risk management based on the knowledge of fuel allocation, since fire behaviour and fire spread study is dependent on the spatial factor. Therefore, mapping fuel for different silvicultural scenarios is essential. Modelling forest variables and forest structure parameters from LiDAR technology is the starting point for developing spatially explicit maps. This is essential in the generation of fuel maps since field measurements of canopy fuel variables is not feasible. In the present study, we evaluated the potential of LiDAR technology to estimate canopy fuel variables and other stand variables, as well as to identify structural differences between silvicultural managed and unmanaged P. pinaster Ait. stands. Independent variables (LiDAR metrics) of greater explanatory significance were identified and regression analyses indicated strong relationships between those and field-derived variables (R2 varied between 0.86 and 0.97). Significant differences were found in some LiDAR metrics when compared thinned and unthinned stands. Results showed that LiDAR technology allows to model canopy fuel and stand variables with high precision in this species, and provides useful information for identifying areas with and without silvicultural management., [ES] Los incendios forestales suponen una gran amenaza en el NO de España. La importancia y frecuencia de estos eventos en la zona sugiere la necesidad de programas de gestión del combustible para reducir la propagación y severidad de los incendios. La realización de una selvicultura de claras puede contribuir a la reducción del riesgo de incendio, ya que ocasiona una ruptura de la continuidad horizontal del combustible forestal. Además, es necesario realizar una gestión del riesgo de incendio basada en el conocimiento de la localización del combustible sobre el terreno, puesto que el estudio del comportamiento de un incendio y la simulación de la propagación del fuego son dependientes del factor espacial. Por ello, resulta esencial la generación de mapas del combustible para diferentes escenarios selvícolas. La elaboración de modelos de estimación de variables dasométricas y de estructura de la masa a partir de tecnología LiDAR es el punto de inicio para la elaboración de una cartografía espacialmente explícita. Esto adquiere mayor valor en los mapas de combustible puesto que la medición de las variables en campo resulta inviable. En el presente estudio, evaluamos el potencial de la tecnología LiDAR para estimar variables del combustible de copa y otras variables de masa, así como para identificar diferencias estructurales a nivel de rodal en masas de Pinus pinasterAit. con y sin manejo selvícola. Las variables independientes (métricas LiDAR) de mayor importancia explicativa fueron identificadas y los análisis de regresión indicaron fuertes relaciones entre éstas y las variables medidas en campo (R2 varió entre 0.86 y 0.97). Por otra parte, se observaron diferencias significativas en algunas métricas LiDAR cuando se compararon masas aclaradas y no aclaradas. Los resultados demostraron que la tecnología LiDAR permite la modelización de variables de masa y de combustible de copa con alta precisión en esta especie, y que proporciona información útil para la identificación de áreas con y sin gestión selvícola, We thank the funding of: i) FORRISK project (Interreg IVB SUDOE 2007-2013), ii) Forest Services of the Government of the Principality of Asturias, and iii) Galician Government and European Social Fund (Official Journal of Galicia – DOG nº 52, 17/03/2014 p. 11343, exp: POS-A/2013/049). We also thank the staff from SERIDA and CETEMAS who participated in the fieldwork. Finally, we also acknowledge the comments of the Reviewers and Editor that have contributed to enhance this study
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of interval and Monte Carlo simulation for the prediction of postprandial glucose under uncertainty in type 1 diabetes mellitus

  • Calm, R.
  • García-Jaramillo, M.
  • Sainz, M.A.
  • Vehí, J.
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] In this paper, the problem of tackling uncertainty in the prediction of postprandial blood glucose is analyzed. Two simulation approaches, Monte Carlo and interval models, are studied and compared. Interval simulation is carried out using modal interval analysis. Simulation of a glucoregulatory model with uncertainty in insulin sensitivities, glucose absorption and food intake is carried out using both methods. Interval simulation is superior in predicting all severe and mild hyper- and hypoglycemia episodes. Furthermore, much less computational time is required for interval simulation than for Monte Carlo simulation, This work was partially supported by the Spanish Ministry of Science and Innovation and the European Union through Grant DPI-2007-66728 and by the Autonomous Government of Catalonia through SGR00523.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Prediction of postprandial blood glucose under uncertainty and intra-patient variability in type 1 diabetes: a comparative study of three interval models,

  • García Jaramillo, Maira Alejandra
  • Calm, R.
  • Vehí, J.
  • Bondía Company, Jorge|||0000-0001-7286-3719
The behavior of three insulin action and glucose kinetics models was assessed for an insulin therapy regime in the presence of patient variability. For this purpose, postprandial glucose in patients with type 1 diabetes was predicted by considering intra- and inter-patient variability using modal interval analysis. Equations to achieve optimal prediction are presented for models 1, 2 and 3, which are of increasing complexity. The model parameters were adjusted to reflect the “same” patient in the presence of variability. The glucose response envelope for model 1, the simplest insulin–glucose model assessed, included the responses of the other two models when a good fit of the model parameters was achieved. Thus, under variability, simple glucose–insulin models may be sufficient to describe patient dynamics in most situations., This work was partially supported by the Spanish Ministry of Science and Innovation through Grant DPI-2010-20764-C02, and by the Autonomous Government of Catalonia through Grant SGR 523.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiobjective design of wearable sensor systems for electrocardiogram monitoring

  • Martinez-Tabares, F. J.
  • Costa-Salas, Y. J.
  • Castellanos-Dominguez, G.
  • Cuesta Frau, David|||0000-0002-0076-0515
Wearable sensor systems will soon become part of the available medical tools for remote and long term physiological monitoring. However, the set of variables involved in the performance of these systems are usually antagonistic, and therefore the design of usable wearable systems in real clinical applications entails a number of challenges that have to be addressed first. This paper describes a method to optimise the design of these systems for the specific application of cardiac monitoring. The method proposed is based on the selection of a subset of 5 design variables, sensor contact, location, and rotation, signal correlation, and patient comfort, and 2 objective functions, functionality and wearability. These variables are optimised using linear and nonlinear models to maximise those objective functions simultaneously. The methodology described and the results achieved demonstrate that it is possible to find an optimal solution and therefore overcome most of the design barriers that prevent wearable sensor systems from being used in normal clinical practice., This work was supported by the Departamento Administrativo de Ciencia, Tecnologia e Innovacion, COLCIENCIAS, Republic of Colombia, under Grant nos. 511 and 523.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A simple robust method for estimating the glucose rate of appearance from mixed meals

  • Herrero, P.
  • Palerm, C.C.
  • Vehí, J.
  • Georgiou, P.
  • Oliver, N.
  • Toumazou, C.
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Background: Estimating the rate of glucose appearance (Ra) after ingestion of a mixed meal may be highly valuable in diabetes management. The gold standard technique for estimating Ra is the use of a multitracer oral glucose protocol. However, this technique is complex and is usually not convenient for large studies. Alternatively, a simpler approach based on the glucose-insulin minimal model is available. The main drawback of this last approach is that it also requires a gastrointestinal model, something that may lead to identifiability problems. Methods: In this article, we present an alternative, easy-to-use method based on the glucose-insulin minimal model for estimation of Ra. This new technique avoids complex experimental protocols by only requiring data from a standard meal tolerance test. Unlike other model-based approaches, this new approach does not require a gastrointestinal model, which leads to a much simpler solution. Furthermore, this novel technique requires the identification of only one parameter of the minimal model because the rest of the model parameters are considered to have small variability. In order to account for such variability as well as to account for errors associated to measurements, interval analysis has been employed. Results: The current technique has been validated using data from a United States Food and Drug Administration-accepted type 1 diabetes simulator [root mean square error (RMSE) = 0.77] and successfully tested with two clinical data sets from the literature (RMSE = 0.69). Conclusions: The presented technique for the estimation of Ra showed excellent results when tested with simulated and actual clinical data. The simplicity of this new technique makes it suitable for large clinical research studies for the evaluation of the role of Ra in patients with impairments in glucose metabolism. In addition, this technique is being used to build a model library of mixed meals that could be incorporated into diabetic subject simulators in order to account for more realistic and varied meals., This work has been funded by the Wellcome Trust, the Spanish Ministry of Science and Innovation through grant DPI2010-20764-C02, the European Union through FEDER funds, and Generalitat de Catalunya under Grant 2009 SGR 523.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Detection of correct and incorrect measurements in real-time continuous glucose monitoring systems applying a postprocessing support vector machine

  • Leal, Yenny
  • GONZALEZ-ABRIL, LUIS
  • Lorencio, Carol
  • Vehí, Josep
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Support vector machines (SVMs) are an attractive option for detecting correct and incorrect measurements in real-time continuous glucose monitoring systems (RTCGMSs), because their learning mechanism can introduce a postprocessing strategy for imbalanced datasets. The proposed SVM considers the geometric mean to obtain a more balanced performance between sensitivity and specificity. To test this approach, 23 critically ill patients receiving insulin therapy were monitored over 72 h using an RTCGMS, and a dataset of 537 samples, classified according to International Standards Organization (ISO) criteria (372 correct and 165 incorrect measurements), was obtained. The results obtained were promising for patients with septic shock or with sepsis, for which the proposed system can be considered as reliable. However, this approach cannot be considered suitable for patients without sepsis., This work was supported by the Spanish Ministry of Science and Innovation under Grant DPI-2010-20764-C02, and by the Autonomous Government of Catalonia under Grant 2009 SGR 523. In addition, this work was partially supported by the Spanish Ministry of Economy and Competitiveness through ARTEMISA (TIN2009-14378-C02-01), and by the Andalusia Regional Ministry of Economy, Innovation and Science through Simon (TIC-8052). Y. Leal was supported by BR Grants of the University of Girona.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Proyecto de Innovación Pongamos los ODS en Danza en el Grado de Ciencias de la Actividad Física y del Deporte

  • Mayolas Pi, María Carmen
  • Preciado-Azanza, Gonzalo
  • Lamiquiz-Moneo, Isabel
  • Calvo-Lluch, África
  • Gimeno-Marco, Fernando
  • Grimal-Tejero, Yara
  • Romero-Martín, M. Rosario
El proyecto multidisciplinar de innovación docente Pongamos los ODS en danza es una apuesta pedagógica para desarrollar los Objetivos de Desarrollo Sostenible (ODS) en el Grado de Ciencias de la Actividad Física y del Deporte. Se pretende que los estudiantes conozcan y reflexionen sobre los ODS y sean capaces de realizar propuestas para su consecución utilizando la danza, la expresión corporal y las habilidades gimnásticas como herramientas de comunicación. Se utiliza la metodología de aprendizaje basado en proyectos. Los estudiantes reciben información sobre los ODS y en grupos de entre cuatro a seis alumnos, realizan un montaje rítmico expresivo en el que presentan ideas o acciones para lograr su consecución. Las asignaturas que participan son: Sociología de la actividad física y el deporte, Deportes rítmico-gimnásticos, Actividades corporales de expresión y Psicología de la actividad física y el deporte. Los montajes se exponen en un escenario en una jornada de puertas abiertas, tras la cual se realiza un tiempo de evaluación, reflexión y compromiso individual con los ODS. Se concluye que este proyecto ha sido útil para trabajar la competencia transversal de la sostenibilidad con los estudiantes del Grado y mejorar su conocimiento, su concienciación y su compromiso con los ODS.