Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Development of a new method to estimate the incident solar flux on central receivers from deteriorated heliostats

  • Rodríguez Sánchez, María de los Reyes
  • Lerey, C
  • Toutant, A
  • Ferriere, A
  • Olalde, G.
This work proposes a new empirical direct methodology to estimate both the solar flux distribution and intensity on the surface of central receivers. In solar power tower plants with deteriorated heliostats, the numerical simulations to estimate the incident solar flux are not precise. Hence the thermal behaviour of the receivers cannot be determined. In those cases, direct measurement or semi-empirical methodologies are required to characterize the radiant power on the receiver. The new methodology proposed, named "Superposition method", consists in the hourly characterization of the reflected solar beam of each individual heliostat by means of a pyrheliometer, a passive screen, a flux sensor, a camera and digital image analysis. According to the aiming strategy used during receiver operation, each individual solar flux distribution and intensity can be gathered to obtain the total incident radiant power on the solar receiver. This non-real-time method has the advantage of reproducing any solar flux distribution on the receiver at present and past time.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Accelerated aging test of solar reflectors according to the new AENOR standard – results of a round Robin test

  • Fernández-García, Aránzazu
  • Martínez-Arcos, Lucía
  • Sutter, Florian
  • Wette, Johannes
  • Sallaberry, Fabienne
  • Erice, Raquel
  • Diamantino, Teresa
  • Carvalho, M. João
  • Raccurt, Olivier
  • Pescheux, Anne-Claire
  • Imbuluzqueta, Gorka
  • Machado, Maider
Durability tests of reflector materials for concentrating solar applications are crucial to guarantee the profitability of the plants and to ensure a proper efficiency during their lifetime. A standard including a set of five accelerated aging tests is close to be published by the Spanish standardization entity AENOR, within the sub-committee AEN/CTN 206/SC117. Under the framework of the STAGE-STE project, a Round Robin Test was organized by six partners to evaluate the comparability of results obtained in their respective laboratories after performing these durability tests. According to the results, in general a good agreement among the partners was found, with negligible to slight reflectance losses. In addition, it was noticed that the reference standard used in the reflectance measurements is of high importance. The conclusions of this work will help to improve the standard in future versions.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Novel Metallic Alloys as Phase Change Materials for Heat Storage in Direct Steam Generation Applications

  • Nieto-Maestre, Javier
  • Iparraguirre-Torres, Iñigo
  • Amondarain-Velasco, Z.
  • Kaltzakorta, Idurre
  • Merchán-Zubieta, Mikel
Concentrating Solar Power (CSP) is one of the key electricity production renewable energy technologies with a clear distinguishing advantage: the possibility to store the heat generated during the sunny periods, turning it into a dispatchable technology. Current CSP Plants use an intermediate Heat Transfer Fluid (HTF), thermal oil or inorganic salt, to transfer heat from the Solar Field (SF) either to the heat exchanger (HX) unit to produce high pressure steam that can be leaded to a turbine for electricity production, or to the Thermal Energy Storage (TES) system. In recent years, a novel CSP technology is attracting great interest: Direct Steam Generation (DSG). The direct use of water/steam as HTF would lead to lower investment costs for CSP Plants by the suppression of the HX unit. Moreover, water is more environmentally friendly than thermal oils or salts, not flammable and compatible with container materials (pipes, tanks). However, this technology also has some important challenges, being one of the major the need for optimized TES systems. In DSG, from the exergy point of view, optimized TES systems based on two sensible heat TES systems (for preheating of water and superheating vapour) and a latent heat TES system for the evaporation of water (around the 70% of energy) is the preferred solution. This concept has been extensively tested [1, 2, 3] using mainly NaNO3 as latent heat storage medium. Its interesting melting temperature (Tm) of 306°C, considering a driving temperature difference of 10°C, means TES charging steam conditions of 107 bar at 316°C and discharging conditions of 81bar at 296°C. The average value for the heat of fusion (ΔHf) of NaNO3 from literature data is 178 J/g [4]. The main disadvantage of inorganic salts is their very low thermal conductivity (0.5 W/m.K) requiring sophisticated heat exchanging designs. The use of high thermal conductivity eutectic metal alloys has been recently proposed [5, 6, 7] as a feasible alternative. Tms of these proposed eutectic alloys are too high for currently available DSG solar fields, for instance the Mg49-Zn51 alloy melts at 342°C requiring saturated steam pressures above 160 bar to charge the TES unit. Being aware of this, novel eutectic metallic alloys have been designed reducing the Tms to the range between 285°C and 330°C (79bar and 145bar of charging steam pressure respectively) with ΔHfs between 150 and 170 J/g, and thus achieving metallic Phase Change Materials (PCM) suitable for the available DSG technologies.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Solar Thermal Collectors for Medium Temperature Applications: A Comprehensive Review and Updated Database: A Comprehensive Review and Updated Database

  • Iparraguirre-Torres, Iñigo
  • Huidobro, Ana
  • Fernández-García, Aránzazu
  • Valenzuela, Loreto
  • Horta, Pedro
  • Sallaberry, Fabienne
  • Osório, Tiago
  • Sanz, Asier
Although the technology of solar thermal collectors for medium temperature applications is not new, few collectors and commercial installations were available worldwide. Presently the sector is growing rapidly, new technologies have been developed and real installations using these technologies are already being built all around the world for different applications, especially for the generation of heat required by industrial applications. Considering the increasing number of available products and the importance of disseminating this information among system designers and end-users, a database of the available solar collectors for medium temperature applications is under development. The information has been gathered from the different collector manufacturers and suppliers and the available technical information published on the different collector models. Aiming a thorough insight into these new commercially available solutions, the database includes the most relevant technical information of the different existing collectors. This work is being done within the framework of the European project STAGE-STE (Scientific and Technological Alliance for Guaranteeing the European Excellence in Concentrating Solar Thermal Energy) (http://www.stage-ste.eu/). The information gathered will also be used within the Task 49, the working group for Solar Heat Integration in Industrial Process (SHIP) of the Solar Heating and Cooling program (SHC) by the International Energy Agency (IEA) (http://task49.iea-shc.org/).
TECNALIA Publications
Publication Artículo científico (JournalArticle)

Feasibility of Storing Latent Heat with Liquid Crystals. Proof of Concept at Lab Scale

  • Bayon, Rocio
  • Coco, Silverio
  • Barcenilla, Maria
  • Espinet, Pablo
  • Imbuluzqueta, Gorka
  • Hidalgo, Jokin
  • Rojas, Esther
In this work, the first experimental results of thermotropic liquid crystals used as phase change materials for thermal storage are presented. For that purpose, the n = 10 derivative from the family of 4-n-alkoxybiphenyl-4-carboxylic acids has been prepared. Different techniques like polarized-light microscopy, differential scanning calorimetry, thermogravimetric analysis and rheological measurements have been applied for its characterization. Having a mesophase/isotropic transition temperature around 251 degrees C, a clearing enthalpy of 55 kJ/kg, a thermal heat capacity of around 2.4 kJ/kg and a dynamic viscosity lower than 0.6 Pas, this compound fulfills the main requirements for being considered as latent heat storage material. Although further studies on thermal stability are necessary, the results already obtained are both promising and encouraging since they demonstrate de viability of this new application of liquid crystals as thermal storage media.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Annual performance of subcritical Rankine cycle coupled to an innovative particle receiver solar power plant

  • Reyes Belmonte, Miguel Ángel|||0000-0002-9666-2388
  • Sebastián Herrera, Andrés|||0000-0002-2667-5909
  • Spelling, James
  • Romero, Manuel|||0000-0001-8152-1331
  • González Aguilar, José|||0000-0001-9641-2330