Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemically Active Thin Carbon Films with Enhanced Adhesion to Silicon Substrates

  • Pengfei, Niu
  • Asturias-Arribas, Laura
  • Gich, Martí
  • Fernández Sánchez, César
  • Roig Serra, Anna
Thin carbon films deposited on technologically relevant substrates, such as silicon wafers, can be easily implemented in miniaturized electrochemical devices and used for sensing applications. However, a major issue in most carbon films is the weak film/substrate adhesion that shortens the working device lifetime. This paper describes the facile preparation of robust thin carbon films on silicon substrates by one-pot sol-gel synthesis. The improved adherence of these carbon films is based on the incorporation of silica through the controlled synthesis of a resorcinol/formaldehyde gel modified with aminopropyltriethoxysilane. The films demonstrate excellent adhesion to the silicon substrate, good homogeneity, excellent electrical conductivity and superior electrochemical performance. Moreover, this approach opens the door to the fabrication of carbon thin-film electrodes by photolithographic techniques., G. Antorrena from the Laboratorio de Microscopias Avanzadas of the Instituto de Nanociencia de Aragón is acknowledged for performing XPS analysis. This research was partially funded by, the European Union’s 7th Framework Programme (FP7/2007-2013) under grant agreement number 614155, the Spanish Ministry of Economy and Competitiveness in cofounding with the European Social Funds through the MAT2012-35324 project, the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and the Generalitat de Catalunya (2014SGR213, 2014SGR1645). The Chinese Scholarship Council fellowship (201206240033) to P.N. and the COST Action MP1202 are also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Attractive mechanical properties of a lightweight highly sensitive bi layer thermistor: polycarbonate/organic molecular conductor

  • Laukhina, Elena
  • Lebedev, Victor
  • Rovira, Concepció
  • Laukhin, Vladimir
  • Veciana, Jaume
The paper covers some of the basic mechanical characteristics of a recently developed bi layer thermistor: polycarbonate/(001) oriented layer of organic molecular conductor α’-(BEDT-TTF)2IxBr3-x, were BEDT-TTF=bis(ethylenedithio)tetrathiafulvalen. The nano and macro mechanical properties have been studied in order to use this flexible, low cost thermistor in sensing applications by proper way. The nano-mechanical properties of the temperature sensitive semiconducting layer of α’-(BEDT-TTF)2IxBr3-x were tested using nanoindentation method. The value of Young’s modulus in direction being perpendicular to the layer plan was found as 9.0 ±1.4 GPa. The macro mechanical properties of the thermistor were studied using a 5848 MicroTester. The tensile tests showed that basic mechanical characteristics of the thermistor are close to those of polycarbonate films. This indicates a good mechanical strength of the developed sensor. Therefore, the thermistor can be used in technologies that need to be instrumented with highly robustness lightweight low cost temperature sensors. The paper also reports synthetic details on fabricating temperature sensing e-textile. As the temperature control is becoming more and more important in biomedical technologies like healthcare monitoring, this work strongly contributes on the ongoing research on engineering sensitive conducting materials for biomedical applications., The authors acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by theVINational R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos IIIwith assistance from the European Regional Development Fund. The authors also appreciate the financial support through the projects: BE-WELL (CTQ2013–40480-R) granted by DGI (Spain), and GenCat (2014-SGR-17) financed by DGR (Catalunya), the European Commission’s Seventh Framework Programme for Research under contracts FP7-OCEAN-2013-614155., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly sensitive multi-layer pressure sensor with an active nanostructured layer of an organic molecular metal

  • Laukhin, Vladimir
  • Lebedev, Victor
  • Laukhina, Elena
  • Rovira, Concepció
  • Veciana, Jaume
This work addresses to the modern technologies that need to be instrumented with lightweight highly sensitive pressure sensors. The paper presents the development of a new plain flexible thin pressure sensor using a nanostructured layer of the highly sensitive organic piezoresistive metal β-(BEDT-TTF)2I3 as an active component; BEDT-TTF=bis (ethylenedithio)tetrathiafulvalene. The original construction approach permits one to operate the developed sensor on the principle of electrical resistance variations when its piezoresistive layer is elongated under a pressure increase. The pressure sensing element and a set of gold electrodes were integrated into one compact multi-layer design. The construction was optimized to enable one generic design for pressure ranges from 1 to 400 bar. The pressure tests showed that the sensor is able to control a small pressure change as a well definite electrical signal. So the developed type of the sensors is very attractive as a new generation of compact, lightweight, low-cost sensors that might monitor pressure with a good level of measurement accuracy., The authors acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by theVINational R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos IIIwith assistance from the European Regional Development Fund. The authors also appreciate the financial support through the projects: BE-WELL (CTQ2013–40480-R) granted by DGI (Spain), and GenCat (2014-SGR-17) financed by DGR (Catalunya), the European Commission’s Seventh Framework Programme for Research under contracts FP7-OCEAN-2013-614155., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigation of sensing capabilities of organic bi-layer thermistor in wearable e-textile and wireless sensing devices

  • Lebedev, Victor
  • Laukhina, Elena
  • Laukhin, Vladimir
  • Somov, Andrey
  • Baranov, Alexander
  • Rovira, Concepció
  • Veciana, Jaume
This study is stimulated by the discovery of high sensitivity of nanostructured layers of organic semiconductor α′-BEDT-TTF)2IxBr3-x [BEDT-TTF = bis(ethylendithio)-tetrathiafulvalene] to heat radiation. We present the development and assessment of the flexible lightweight highly sensitive film-based thermistor as (i) a separate sensor, (ii) a sensor integrated in e-textile and (iii) a sensor embedded in a wireless sensor node. Wireless Sensor Networks (WSN) and Internet of Things (IoT), being two promising technologies, have already been applied in a number of monitoring scenarios. In spite of great progress achieved in sensing technologies and wireless embedded systems there is a gap in multidisciplinary research aimed at investigating the aggregate potential of these technologies. Experimental results demonstrate that the developed bi-layer organic thermistor has high potential for environmental and biomedical monitoring. They can be used as a part of wearable units or as sensing units on board of wireless sensing devices., The authors acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also appreciate the financial support through the projects: BE-WELL (CTQ2013–40480-R) granted by DGI (Spain), and GenCat (2014-SGR-17) financed by DGR (Catalunya). The authors further acknowledge financial support from the European Commission's Seventh Framework Programme for Research under contract FP7-OCEAN-2013-614155 and support by the grant No. RFMEFI57714X0133 from the Ministry of Education and Science of the Russian Federation., Peer reviewed