Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

TECNALIA Publications
Publication Artículo científico (JournalArticle)

SOLUTIONS FOR DIGITISATION AND PREFABRICATION IN THE ENERGY REFURBISHMENT OF BUILDINGS

  • Tellado-Laraudogoitia, Nagore
  • Lasarte, Natalia
  • Macías, Olga
  • Iturralde, Kepa
  • Bock, Thomas
  • Sebesi, Yvon
The objective of this study is to evaluate the practical application of a digital process for the buildings’ energy rehabilitation using prefabricated modules. The literature is extensive in this aspect, numerous technologies are mentioned for the digitalization of buildings’ rehabilitation process (BIM, laser scanner, drones, etc.), and there are also many prefabricated products for rehabilitation, but its introduction in the market is still very limited. This is due in part to the uncertainty in its practical application, and the difficulties that may entail changing processes, digitizing them, and integrating innovations in a sector as conservative as construction. Within BERTIM project, prefabricated wooden modules that integrate both carpentry and HVAC distribution networks and a methodology for the energy rehabilitation of buildings through a digitalized process have been developed. These developments have been implemented in two buildings which has allowed to identify the main barriers and difficulties that construction companies encounter in the execution. The main difficulties are: i) the method of capturing building data for the generation of its BIM model, ii) the integration of the HVAC distribution networks into the modules iii) the installation procedure of the modules on the existing building façade so that minimum execution times are ensured even in façades with many deviations and a large lack of verticality. This study addresses these difficulties and proposes practical solutions that will allow industrials to implement digital processes and will foster the use of prefabricated modules in the buildings’ energy rehabilitation.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Full scale experimental performance assessment of a prefabricated timber panel for the energy retrofitting of multi-rise buildings

  • Garay, Roberto
  • Benito Ayucar, Josu
  • Arregi Goikolea, Beñat
  • Garay Martinez, Roberto
A prefabricated timber façade system is presented for the energy retrofitting of buildings. Large panel dimensions facilitate the installation of this system, with reduced disturbance to building users and increased overall quality in terms of thermal bridge mitigation and air tightness of architectural junctions. A full scale proof of concept test is performed, where several prefabricated timber panels were installed over a pre-existing brick façade, their junctions tested, and the differential thermal performance of the system is evaluated. It is concluded that the overall thermal performance of the system is satisfactory in terms of overall U-value, thermal bridge coefficient and, temperature factor. Furthermore, and based on experimentally obtained data, a dynamic characterization of the harmonic thermal response of the system is performed.
TECNALIA Publications
Publication Artículo científico (JournalArticle)

A conceptual design of an integrated Façade system to reduce embodied energy in residential buildings

  • Pan, Wen
  • Iturralde, Kepa
  • Bock, Thomas
  • Martinez, Roberto Garay
  • Juez, Olga Macias
  • Finocchiaro, Pietro
(1) The overall energy requirement of a building may be impacted by the building design, the selection of materials, the construction methods, and lifecycle management. To achieve an optimum energy-efficiency level when dealing with a new building or renovation project, it is important to improve the entire construction process as it is not enough to merely focus on the operational phase. If conventional construction practices do not evolve, compromise, or adapt to necessary changes, then it becomes challenging to deliver an ultimate low energy building. (2) This paper demonstrates the trend of off-site prefabrication and its production principles and the notions of open-building design and Design for X, as well as offering an overview of the development of automation in construction, which provides both insights and evaluations based on the context of the research. (3) Three European Union Horizon 2020 research projects were evaluated, and the outcome of the projects served as the backbone for the research and inspired the design of the proposed integrated façade system. Two design scenarios were proposed to demonstrate the potential improvements that could be achieved in a new build as well as in renovation projects. (4) The research lays a foundation for establishing a larger cross-disciplinary collaboration in the future.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Semiautomated Primary Layout Definition with a Point Cloud for Building-Envelope Renovation

  • Iturralde, Kepa
  • Gambao, Ernesto
  • Bock, Thomas
Prefabricated modules are being used to renovate the building envelope. However, compared to manual methods, the design and prefabricated module’s definition is time consuming. Therefore, it is necessary to improve the efficiency of the prefabricated layout definition processes by incorporating automation and computational design. The purpose of this paper is to present a semi-automated definition of the layout of the prefabricated modules with the only input of the existing building facade being the Point Cloud. In this research, a novel step-by-step workflow was developed. More precisely, an algorithm was developed that processes the coordinates of each point of the cloud and generates the layout of the prefabricated modules. To validate the workflow and the algorithm, four facades were tested, considering two parameters: (a) working time and (b) output accuracy. According to the results, it was concluded that spending more time achieving an accurate laser data acquisition can be a good strategy to obtain the primary layout with sufficient precision., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 636984., Peer reviewed
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Deviation-Correcting Interface for Building-Envelope Renovation

  • Iturralde, Kepa|||0000-0002-3827-6374
  • Gambao Galán, Ernesto|||0000-0003-1705-1800
  • Bock, Thomas|||0000-0002-1278-7440
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Semiautomated Primary Layout Definition with a Point Cloud for Building-Envelope Renovation

  • Iturralde, Kepa|||0000-0002-3827-6374
  • Gambao Galán, Ernesto|||0000-0003-1705-1800
  • Bock, Thomas|||0000-0002-1278-7440