Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Fundamentals of light-cell–polymer interactions in photo-cross-linking based bioprinting

  • Nieto, Daniel
  • Marchal Corrales, Juan Antonio|||0000-0002-4996-8261
  • Jorge de Mora, Alberto
  • Moroni, Lorenzo
DATA AVAILABILITY The data that support the findings of this study are available within the article., Daniel Nieto thanks the support from the Xunta de Galicia, Spain, under the Galician Programme for Research Innovation and Growth 2011-2015 (I2C Plan). Lorenzo Moroni is grateful to the Dutch Province of Limburg and to the European Research Council starting grant “Cell Hybridge” (Grant No. 637308). This work was supported by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and European Regional Development Funds (ERDF) (Project Nos. B-CTS-230-UGR18 and PY18–2470) and the Instituto de Salud Carlos III, ERDF funds (No. DTS19/00145)., Biofabrication technologies that use light for polymerization of biomaterials have made significant progress in the quality, resolution, and generation of precise complex tissue structures. In recent years, the evolution of these technologies has been growing along with the development of new photocurable resins and photoinitiators that are biocompatible and biodegradable with bioactive properties. Such evolution has allowed the progress of a large number of tissue engineering applications. Flexibility in the design, scale, and resolution and wide applicability of technologies are strongly dependent on the understanding of the biophysics involved in the biofabrication process. In particular, understanding cell–light interactions is crucial when bioprinting using cell-laden biomaterials. Here, we summarize some theoretical mechanisms, which condition cell response during bioprinting using light based technologies. We take a brief look at the light–biomaterial interaction for a better understanding of how linear effects (refraction, reflection, absorption, emission, and scattering) and nonlinear effects (two-photon absorption) influence the biofabricated tissue structures and identify the different parameters essential for maintaining cell viability during and after bioprinting., Xunta de Galicia, European Research Council starting grant "Cell Hybridge" 637308, Junta de Andalucia, European Union (EU) B-CTS-230-UGR18 PY18-2470, Instituto de Salud Carlos III, ERDF funds DTS19/00145
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Controlling tosylation versus chlorination during end group modification of PCL

  • Beeren, Ivo A. O.
  • Dijkstra, Pieter J.
  • Massonnet, Philippe
  • Camarero Espinosa, Sandra
  • Baker, Matthew B.
  • Moroni, Lorenzo
Synthetic biodegradable materials are commonly used to create constructs for medical devices and tissue engineered constructs. However, many of the homopolymers used in FDA approved devices such as poly(ε-caprolactone) (PCL), poly(lactic acid), or poly(carbonates) lack biogically relevant functional groups to steer biological responses in a controlled fashion. Commonly, an interconversion of the end groups is required to insert addressable moieties for the attachment of biologically active groups. In this study, the activation of the hydroxyl groups of a low molecular weight PCL-diol to the corresponding p-toluene sulfonate ester using p-toluenesulfonyl chloride was performed in both dichloromethane (DCM) and dimethylformamide (DMF). To our initial surprise, we only yielded the chlorinated product in DMF, while in DCM the tosylate ester was obtained. In a small series of reactions, we studied the solvent dependent switchability between tosylation and chlorination on PCL. We concluded that in polar aprotic solvents (DMF and dimethylsulfoxide), we rapidly and efficiently converted the hydroxyl into the chloride group, whereas in inert solvents (DCM and chloroform) we yielded the tosylated product. The data suggested that solvation effects of the polar aprotic solvents led to a Sn2 reaction of the tosyl group by the chloride. Furthermore, we utilized a polyethylene glycol (PEG) polymer to show translatability of the chlorination reaction to other (biomedical) polymers. This work highlights a new reaction pathway during the tosylation of a polymer end group, and presents a new useful strategy to insert clickable groups on synthetic polymers that are only soluble in polar aprotic solvents., We thank the CORE IMS lab, Division of Imaging Mass Spectrometry at The Maastricht Multimodal Molecular Imaging Institute (M4i), for the ToF-SIMS experiments. We are also grateful to the European Research Council starting grant “Cell Hybridge” for financial support under the Horizon2020 framework program (Grant #637308).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

3D Printed Dual-Porosity Scaffolds: The Combined Effect of Stiffness and Porosity in the Modulation of Macrophage Polarization

  • Camarero Espinosa, Sandra
  • Carlos Oliveira, Maria
  • Liu, Hong
  • Mano, Joao F.
  • Bouvy, Nicole
  • Moroni, Lorenzo
Tissue regeneration evolves toward the biofabrication of sophisticated 3D scaffolds. However, the success of these will be contingent to their capability to integrate within the host. The control of the mechanical or topographical properties of the implant appears as an ideal method to modulate the immune response. However, the interplay between these properties is yet not clear. Dual-porosity scaffolds with varying mechanical and topographical features are created, and their immunomodulatory properties in rat alveolar macrophages in vitro and in vivo in a rat subcutaneous model are evaluated. Scaffolds are fabricated via additive manufacturing and thermally induced phase separation methods from two copolymers with virtually identical chemistries, but different stiffness. The introduction of porosity enables the modulation of macrophages toward anti-inflammatory phenotypes, with secretion of IL-10 and TGF-beta. Soft scaffolds (<5 kPa) result in a pro-inflammatory phenotype in contrast to stiffer (>40 kPa) scaffolds of comparable porosities supporting a pro-healing phenotype, which appears to be related to the surface spread area of cells. In vivo, stiff scaffolds integrate, while softer scaffolds appear encapsulated after three weeks of implantation, resulting in chronic inflammation after six weeks. The results demonstrate the importance of evaluating the interplay between topography and stiffness of candidate scaffolds., This work was supported by the ERC starting grant "Cell Hybridge" under the Horizon2020 framework program (Grant No. 637308). S.C.E. acknowledges the supported by the Marie-Slodowska-Curie Action "PRIUSTE" under the H2020 framework program [845488]. J.F.M. acknowledges the support from the projects CICECO-Aveiro Institute of Materials (UIDB/50011/2020 and UIDP/50011/2020), financed from the Foundation for Science and Technology/MCTES. The authors are grateful to Andrea Calore for helping with microCT analysis and to Marloes Peters and David Koper for support during the animal experiments.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Installation of click-type functional groups enable the creation of an additive manufactured construct for the osteochondral interface

  • Beeren, Ivo A. O.
  • Dijkstra, Pieter J.
  • Lourenço, Ana Filipa H.
  • Sinha, Ravi
  • Gomes, David B.
  • Liu, Hong
  • Bouvy, Nicole
  • Baker, Matthew B.
  • Camarero Espinosa, Sandra
  • Moroni, Lorenzo
Melt extrusion-based additive manufacturing (AM) is often used to fabricate scaffolds for osteochondral (OC) regeneration. However, there are two shortcomings associated with this scaffold manufacturing technique for engineering of tissue interfaces: (a) most polymers used in the processing are bioinert, and (b) AM scaffolds often contain discrete (material) gradients accompanied with mechanically weak interfaces. The inability to mimic the gradual transition from cartilage to bone in OC tissue leads to poor scaffold performance and even failure. We hypothesized that introducing peptide gradients on the surface could gradually guide human mesenchymal stromal cell (hMSC) differentiation, from a chondrogenic towards on osteogenic phenotype. To work towards this goal, we initially manufactured poly(epsilon-caprolactone)-azide (PCLA) and PCL-maleimide (PCLM) scaffolds. The surface exposed click-type functional groups, with a surface concentration in the 10(2)pmol cm(-2) regime, were used to introduce bone morphogenic protein-2 or transforming growth factor-beta binding peptide sequences to drive hMSC differentiation towards osteogenic or chondrogenic phenotypes, respectively. After 3 weeks of culture in chondrogenic medium, we observed differentiation towards hypertrophic chondrogenic phenotypes with expression of characteristic markers such as collagen X. In osteogenic medium, we observed the upregulation of mineralization markers. In basic media, the chondro-peptide displayed a minor effect on chondrogenesis, whereas the osteo-peptide did not affect osteogenesis. In a subcutaneous rat model, we observed a minimal foreign body response to the constructs, indicating biocompatibility. As proof-of-concept, we finally used a novel AM technology to showcase its potential to create continuous polymer gradients (PCLA and PCLM) across scaffolds. These scaffolds did not display delamination and were mechanically stronger compared to discrete gradient scaffolds. Due to the versatility of the orthogonal chemistry applied, this approach provides a general strategy for the field; we could anchor other tissue specific cues on the clickable groups, making these gradient scaffolds interesting for multiple interfacial tissue applications., This work was supported by the European Research Council starting grant 'Cell Hybridge' for financial support under the Horizon2020 framework program (Grant #637308). The authors would like to acknowledge the Chemelot Innovation and Learning Labs (CHILL) located at Brightlands Chemelot Campus in Geleen (The Netherlands) for allowing us to use their GPC equipment.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Janus 3D Printed Dynamic Scaffolds for Nanovibration-Driven Bone Regeneration

  • Camarero Espinosa, Sandra
  • Moroni, Lorenzo
The application of physical stimuli to cell cultures has shown potential to modulate multiple cellular functions including migration, differentiation and survival. However, the relevance of these invitro models to future potential extrapolation invivo depends on whether stimuli can be applied "externally", without invasive procedures. Here, we report on the fabrication and exploitation of dynamic additive-manufactured Janus scaffolds that are activated on-command via external application of ultrasounds, resulting in a mechanical nanovibration that is transmitted to the surrounding cells. Janus scaffolds were spontaneously formed via phase-segregation of biodegradable polycaprolactone (PCL) and polylactide (PLA) blends during the manufacturing process and behave as ultrasound transducers (acoustic to mechanical) where the PLA and PCL phases represent the active and backing materials, respectively. Remote stimulation of Janus scaffolds led to enhanced cell proliferation, matrix deposition and osteogenic differentiation of seeded human bone marrow derived stromal cells (hBMSCs) via formation and activation of voltage-gated calcium ion channels, The authors acknowledge the Texas A&M Health Science Center College of Medicine Institute for Regenerative Medicine at Scott & White who isolated and provided the cells through a grant from NCRR of the NIH (Grant #P40RR017447). The authors acknowledge the financial support from the European Commission under the ERC starting grant “Cell Hybridge” of the Horizon2020 framework program (Grant # 637308).