Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Mode-locked Photonic Integrated Circuits for Millimeter and Terahertz Wave Wireless Communications

  • Lo, Mu Chieh
  • Gordón Gallegos, Carlos Diego
  • Guzmán Martínez, Robinson Cruzoe
  • Carpintero del Barrio, Guillermo
We present a 160 GHz pulsed source, based on an on-chip repetition rate multiplier scheme to double the repetition rate of an 80 GHz multiple pulse colliding mode-locked (mCPM) laser. For the first time to our knowledge, we demonstrate the monolithic integration of the mCPM laser and the pulse rate multiplier structures, using a generic foundry approach. From a 20 GHz fundamental repetition rate we achieve a ×4 increase, up to 160 GHz. The FWHM pulsewidth of 160 GHz pulse train is 0.979 ps.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Photonic Integrated Circuit Comprising Mode-Locked Laser and Pulse Interleaver for Wavelength Tunable THz Signal Generation

  • Lo, Mu Chieh
  • Guzmán Martínez, Robinson Cruzoe
  • Gordón Gallegos, Carlos Diego
  • Carpintero del Barrio, Guillermo
We report a photonic chip comprising multiple colliding pulse mode-locked laser and delay line-assisted Mach-Zehnder interleaver to generate 350GHz wave signal. With this mode-locked laser fourth harmonics are obtained. The interleaver quadruples the repetition rate. An integrated phase modulator enables wavelength tuning up to 0.03nm., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642355 and Spanish Ministerio de Economia y Competitividad DiDACTIC project (TEC2013-47753-C3-3-R). The authors would like to thank SMART Photonics for the chip fabrication.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Tesis doctoral (DoctoralThesis)

Integrated broadband antennas for photonic-enabled millimetre-wave transmission

  • Ali, Muhsin
The scope of this doctoral thesis is within the development of advanced wireless communication links operating in the millimetre-wave frequency range, contributing in the development of key requirements, on one hand enhancing the radiated power and enabling the steering of the radiated power. This thesis presents a photonic-based approach to support high data rates and meet the requirements that are expected for next generation systems, defined for beyond 5G (also known as 6G), highly mobile steerable devices. We present advances in the design and optimization of planar antennas on low-cost laminates integrating high-speed photodiodes in hybrid fashion. We present technique for opto-electronic integration with purpose of maximising the power transfer from photodiodes to the antenna. Both the utilise uni-travelling carrier photodiode (UTC-PD) and p-i-n photodiode (PIN-PD) are utilised for this purpose. With the successful demonstration of single-element UTC-PD and PIN-PD emitters, we conduct further research to realise integrated emitter arrays. In this respect, a photonic-integrated emitter with planar phased array antennas is developed using UTC-PDs, providing radiated mm-Wave power of up to -2 dBm. We experimentally demonstrate the photonics-enabled beamsteering over a frequency range of 60 GHz to 70 GHz, with a beam scanning range of 30°. Moreover, using the phased array module, the wireless data transmission is also achieved together while performing beamsteering. As a result, this is the first of its kind system demonstration employing integrated photonic emitter, forming the basis for large-scale integrated antenna arrays for 5G systems. Additionally, we also demonstrate photonics-based terahertz source working in the J-band (220 – 325 GH) frequency. Two modules are developed by integrating a high-speed InGaAs/InGaAsP PIN photodiode in a WR-03 rectangular waveguide WR-3 package for photonic to terahertz conversion. The first device performs direct photonic to THz conversion, providing an output power of -14.4 dBm (36.3 μW). The second device, is based on a hybrid photonic-electronic technique. By photonic-electronic co-integration, the PIN-PD is coupled to a frequency multiplier chip in a single package, providing the photonic generation and frequency multiplication in the same device. To the best of our knowledge, this is the first realisation of WR-03-integrated emitter based on a PIN photodiode. Finally, thesis presents the design of ultra-wideband detectors based on Schottky barrier diodes assembled in quasi-optic package. The primary goal is to propose a design for the receivers with large baseband bandwidth, capable of operating across frequency bands in mm-Wave and THz range. A record baseband of 25 GHz is achieved using custom-built detectors. For the proof of concept, experiments are conducted using the custom-built devices capable of transmitting more than 12.5 Gbps of data signals on carrier from mm-Wave to sub-THz., I am grateful for the funding by European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska Curie project FiWiN5G, with grant number 642355. I also acknowledge the financial support from European Action COST EUIMWP CA16220., Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de Madrid, Presidente: Andreas Stöhr.- Secretario: Horacio Lamela Rivera.- Vocal: Ho-Jin Song
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

1.8-THz-wide optical frequency comb emitted from monolithic passively mode-locked semiconductor quantum-well laser

  • Lo, Mu Chieh
  • Guzmán Martínez, Robinson Cruzoe
  • Ali, Muhsin
  • Santos, Rui
  • Agustin, Luc
  • Carpintero del Barrio, Guillermo
We report on an optical frequency comb with 14 nm (∼1.8 THz) spectral bandwidth at a −3 dB level that is generated using a passively mode-locked quantum-well laser in photonic integrated circuits fabricated through an InP generic photonic integration technology platform. This 21.5-GHz colliding-pulse mode-locked laser cavity is defined by on-chip reflectors incorporating intracavity phase modulators followed by an extracavity semiconductor optical amplifier as a booster amplifier. A 1.8-THz-wide optical comb spectrum is presented with an ultrafast pulse that is 0.35 ps wide. The radio frequency beat note has a 3-dB linewidth of 450 kHz and 35-dB SNR., Horizon 2020 Framework Programme (H2020) (642355); Spanish Ministerio de Economía y Competitividad (MINECO) DiDACTIC (TEC2013-47753-C3-3-R); Consejería de Educación, Juventud y Deporte of Comunidad de Madrid (P2013/ICE-3004).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

A photonically-excited leaky-wave antenna array at E-band for 1-D beam steering

  • Pascual García, Alvaro J.
  • Ali, Mushin
  • Carpintero del Barrio, Guillermo
  • Ferrero, Fabien
  • Brochier, Laurent
  • Sauleau, Ronan
  • García Muñoz, Luis Enrique
  • Gonzalez Ovejero, David
This manuscript reports the first leaky-wave antenna (LWA) array excited by a photomixer as well as its potential application for alignment in wireless links. The designed array is manufactured in printed circuit board (PCB) technology, works at the E-band (from 75 to 85 GHz), and provides a directive beam of about 18 dBi with a frequency scanning span of 22°. The antenna element consists of a microstrip line periodically loaded with stubs, and it has been designed employing a hybrid approach combining full-wave simulations and transmission line theory. This approach enables the optimization of the periods when the open-stopband of the LWA is mitigated or removed at the frequency of broadside emission. The proposed antenna was first tested using a ground signal ground (GSG) probe; the measured return loss and radiation patterns of the fabricated prototype were in good agreement with full-wave simulations. Then, the LWA array was integrated with the photomixer chip using conductive epoxy threads. Measurements of the radiated power yielded a maximum of 120 µW at 80.5 GHz for a 9.8 mA photocurrent. Finally, the antenna was used in a 25 cm wireless link, obtaining a 2.15 Gbps error-free data rate., Á.J.P.-G., D.G.-O., and R.S. acknowledge funding by Labex CominLabs and by the European Union through the European Regional Development Fund (ERDF), and the French region of Brittany, Ministry of Higher Education and Research, RennesMétropole and ConseilDépartemental 35, through the CPER Project SOPHIE/STIC and Ondes. The work of M.A. and G.C.D.B. has been supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642355 FiWiN5G. L.E.G.-M. and G.C.D.B. acknowledge the Spanish Ministerio de Economia y Competitividad through Programa Estatal de Investigación, Desarrollo e Inovación Orientada a los Retos de la Sociedad (grant iTWIT, TEC2016-76997-C3-3-R).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Sub-picosecond pulse and terahertz optical frequency comb generation by monolithically integrated linear mode-locked laser

  • Lo, Mu Chieh
  • Guzmán Martínez, Robinson Cruzoe
  • Ali, Muhsin
  • Santos, Rui
  • Agustin, Luc
  • Carpintero del Barrio, Guillermo
We report on a record broad 3-dB bandwidth of 14 nm (~1.8 THz around 1532 nm) optical frequency comb generated from a passively mode-locked quantum-well (QW) laser in the form of photonic integrated circuits through an InP generic photonic integration technology platform. This 21.5-GHz colliding-pulse mode-locked laser cavity is defined by two on-chip reflectors incorporating intracavity phase modulators followed by an out-of-cavity SOA as booster. Under certain operating conditions, an ultra-wide spectral bandwidth is achieved along with an autocorrelation trace confirming the mode locking nature exhibiting a pulse width of 0.35 ps. The beat note RF spectrum has a linewidth of sub-MHz and 35-dB SNR., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642355 FiWiN5G and Spanish Ministerio de Economia y Competitividad DiDACTIC project TEC201347753-C3-3R.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Tunable Mode-Locked Laser Photonic Integrated Circuit Using Intracavity Phase Modulators

  • Lo, Mu Chieh
  • Guzmán Martínez, Robinson Cruzoe
  • Gordón Gallegos, Carlos Diego
  • Carpintero del Barrio, Guillermo
A 30 GHz mode-locked laser in PIC is presented using InP-based active-passive integration technology. The 2.8 mm long cavity contains phase modulators enabling sub-nm fine tuning of the lasing spectrum which is experimentally demonstrated., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642355 “FiWiN5G” and Spanish Ministerio de Economia y Competitividad DiDACTIC project TEC201347753-C3-3-R)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Mode-locked laser with pulse interleavers in a monolithic photonic integrated circuit for millimeter wave and terahertz carrier generation

  • Lo, Mu Chieh
  • Guzmán Martínez, Robinson Cruzoe
  • Gordón Gallegos, Carlos Diego
  • Carpintero del Barrio, Guillermo
This paper presents a photonics-based mmW and THz frequency synthesizer using monolithic InP photonic integrated circuit comprising a mode-locked laser (MLL) and two pulse interleaver stages to multiply the repetition rate frequency. The MLL is a multiple colliding pulse mode-locked laser producing an 80 GHz repetition rate pulse train. Through two consecutive monolithic pulse interleaver structures, each doubling the repetition rate, we demonstrate the achievement of 160 GHz and 320 GHz. The fabrication was done on a multi-project wafer (MPW) run of a generic InP photonic technology platform., European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642355; Spanish Ministerio de Economia y Competitividad DiDACTIC project (TEC2013-47753-C3-3-R).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Frequency Tuning of Symmetric Colliding Pulse Mode-Locked Laser through Asymmetric Biasing Intra-Cavity Phase Modulators

  • Lo, Mu Chieh
  • Guzmán Martínez, Robinson Cruzoe
  • Gordón Gallegos, Carlos Diego
  • Ali, Muhsin
  • Carpintero del Barrio, Guillermo
Proceeding and poster presented at: European Conference on Integrated Optics (ECIO). Eindhoven (Netherlands). 3-5 April, 2017, In this paper we report a multimode interference reflector (MIR)-based linear cavity mode-locked laser (MLL) operating in the telecom C-band with a repetition rate of 30 GHz as shown in Fig. 1. A pair of intra-cavity electro-optic phase modulators (EOPM) enables spectral tuning of the optical and the photo-detected RF spectrum. As an asymmetric bias voltage increases up to 6 V, the RF frequency shift reaches 3 MHz. This photonic integrated circuit (PIC) was rapidly prototyped using generic photonic integration technology platform via industrial Multi-Project Wafer (MPW) run, This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642355 FiWiN5G
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

300 GHz optoelectronic transmitter combining integrated photonics and electronic multipliers for wireless communication

  • Ali, Muhsin
  • Perez Escudero, Jose Manuel
  • Guzmán Martínez, Robinson Cruzoe
  • Lo, Mu Chieh
  • Ederra, Iñigo
  • Blanco Gonzalo, Ramón
  • García Muñoz, Luis Enrique
  • Santamaría-Botello, Gabriel Arturo
  • Segovia Vargas, Daniel
  • Van Frederic, Dijk
  • Carpintero del Barrio, Guillermo
THz communications systems at carrier frequencies above 200 GHz are the key to enable next-generation mobile communication networks with 100 Gbit/s wireless data rates. One of the key questions is, which carrier frequency generation technique will be the most suitable. This is currently addressed by two separate approaches, electronics-based and photonics-based. We present in this paper a truly microwave photonic approach that benefits from the main key features of each, bandwidth, tunability, stability and fiber compatibility from photonics and power handling capability from the electronics. It is based on a Photonic Local Oscillator (PLO), generating a 100 GHz frequency, fed into an electronic frequency multiplier. A high speed uni-travelling carrier photodiode (UTC-PD) provides the 100 GHz PLO for Schottky tripler diodes, generating 300 GHz signal. To feed the UTC-PD, we present a photonic integrated mode locked laser source. According to the simulations and measurements, the developed transmitter can produce a maximum of 12 muW of THz power at 280 GHz., This work has been supported by European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642355 FiWiN5G, as well as by Spanish Ministerio de Economía y Competitividad through Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (grant iTWIT, TEC2016-76997-C3-3-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

300 GHz optoelectronic transmitter combining integrated photonics and electronic multipliers for wireless communication

  • Ali, Muhsin
  • Pérez Escudero, José Manuel
  • Guzmán Martínez, Robinson Cruzoe
  • Lo, Mu Chieh
  • Ederra Urzainqui, Íñigo
  • Gonzalo García, Ramón
  • García Muñoz, Luis Enrique
THz communications systems at carrier frequencies above 200 GHz are the key to enable next-generation mobile communication networks with 100 Gbit/s wireless data rates. One of the key questions is, which carrier frequency generation technique will be the most suitable. This is currently addressed by two separate approaches, electronics-based and photonics-based. We present in this paper a truly microwave photonic approach that benefits from the main key features of each, bandwidth, tunability, stability and fiber compatibility from photonics and power handling capability from the electronics. It is based on a Photonic Local Oscillator (PLO), generating a 100 GHz frequency, fed into an electronic frequency multiplier. A high speed uni-travelling carrier photodiode (UTC-PD) provides the 100 GHz PLO for Schottky tripler diodes, generating 300 GHz signal. To feed the UTC-PD, we present a photonic integrated mode locked laser source. According to the simulations and measurements, the developed transmitter can produce a maximum of 12 μWof THz power at 280 GHz., This work has been supported by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642355 FiWiN5G, as well as by Spanish Ministerio de Economía y Competitividad through Programa Estatal de Investigación, Desarrollo e Inovación Orientada a los Retos de la Sociedad (grant iTWIT, TEC2016-76997-C3-3-R).