Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

A Linear Model Predictive Planning Approach for Overtaking Manoeuvres Under Possible Collision Circumstances

  • Lattarulo, Ray
  • He, Daniel
  • Perez, Joshue
  • Heß, Daniel
Overtaking is one of the most difficult tasks during driving. This manoeuvre demands good skills to accomplish it correctly. In the overtaking considering multiple vehicles (more than a couple) is necessary to understand, predict and coordinate future actions of the other participants. These reasons make it a significant scenario for testing in the connected and automated driving field, with the main goal of predicting safe future states. In this sense, this work presents an overtaking method based on a linear Model Predictive Control (MPC) approach, which considers multiple participants involved in the scenario. This method adapts dynamically the trajectory for the manoeuvre in case of unexpected situations. Some of these changes consider other vehicles coming on the opposite lane or variations on participants' driving decisions. Additionally, the system considers passengers' comfort, the vehicle physical constraints and lateral actions of the vehicle decoupled of the longitudinal ones to simplify the problem.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Early Safety Assessment of Automotive Systems Using Sabotage Simulation-Based Fault Injection Framework

  • Juez, Garazi
  • Amparan, Estibaliz
  • Lattarulo, Ray
  • Ruíz, Alejandra
  • Perez, Joshue
  • Espinoza, Huascar
As road vehicles increase their autonomy and the driver reduces his role in the control loop, novel challenges on dependability assessment arise. Model-based design combined with a simulation-based fault injection technique and a virtual vehicle poses as a promising solution for an early safety assessment of automotive systems. To start with, the design, where no safety was considered, is stimulated with a set of fault injection simulations (fault forecasting). By doing so, safety strategies can be evaluated during early development phases estimating the relationship of an individual failure to the degree of misbehaviour on vehicle level. After having decided the most suitable safety concept, a second set of fault injection experiments is used to perform an early safety validation of the chosen architecture. This double-step process avoids late redesigns, leading to significant cost and time savings. This paper presents a simulation-based fault injection approach aimed at finding acceptable safety properties for model-based design of automotive systems. We focus on instrumenting the use of this technique to obtain fault effects and the maximum response time of a system before a hazardous event occurs. Through these tangible outcomes, safety concepts and mechanisms can be more accurately dimensioned. In this work, a prototype tool called Sabotage has been developed to set up, configure, execute and analyse the simulation results. The feasibility of this method is demonstrated by applying it to a Lateral Control system.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Fault injection method for safety and controllability evaluation of automated driving

  • Uriagereka, Garazi Juez
  • Lattarulo, Ray
  • Rastelli, Joshue Perez
  • Calonge, Estibaliz Amparan
  • Ruiz Lopez, Alejandra
  • Espinoza Ortiz, Huascar
Advanced Driver Assistance Systems (ADAS) and automated vehicle applications based on embedded sensors have become a reality today. As road vehicles increase its autonomy and the driver shares his role in the control loop, novel challenges on their dependability assessment arise. One key issue is that the notion of controllability becomes more complex when validating the robustness of the automated vehicle in the presence of faults. This paper presents a simulation-based fault injection approach aimed at finding acceptable controllability properties for the model-based design of control systems. We focus on determining the best fault models inserting exceptional conditions to accelerate the identification of specific areas for testing. In our work we performed fault injection method to find the most appropriate safety concepts, controllability properties and fault handling strategies at early design phases of lateral control functions based on the error in the Differential GPS signal.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

Towards conformant models of automated electric vehicles

  • Lattarulo, Ray A.
  • Heb, Daniel
  • Matute, Jose A.
  • Perez, Joshue
  • Hes, Daniel
Automated driving is one of the major tendencies in last decades, and it is presented as a reliable option to improve comfort during driving, including disable and elder in society and increasing persons safety in roads. This last topic produces the question how is it possible to verify planning and control algorithms for a reliable commercial use of this technology. The question can be answered from two perspective: experimental or formal methods, where the formal one is selected as the most robust between both. Hence, the current work presents a case study verification in automated driving for lane change and double lane change maneuvers, using as basis a trace conformance method presented in [1]. The verification method is performed in Dynacar as a precise multibody simulator tuned for a commercial Renault Twizy vehicle.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

A Speed Planner Approach Based On Bézier Curves Using Vehicle Dynamic Constrains and Passengers Comfort

  • Lattarulo, Ray
  • Marti, Enrique
  • Marcano, Mauricio
  • Matute, Jose
  • Perez, Joshue
This paper presents a speed profile generation approach for longitudinal control of automated vehicles, based on quintic Bézier curves. The described method aims to increase comfort level of passengers based on the ISO2631-1 specification, while taking into account vehicle dynamics and traffic rules to keep high safety levels. The algorithm has been tested in an in-house tool for high accuracy vehicle dynamics simulations, called Dynacar. The considered scenario is a closed circuit inside Tecnalia facilities. The resulting profile has better properties (for example, rate of change) than a raw input based on traffic speed limits. When used as reference for the speed controller, it improves both comfort and safety.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

First-order synergies for motion planning of anthropomorphic dual-arm robots

  • García Hidalgo, Néstor|||0000-0003-3782-1745
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
This paper addresses the problem of designing a planning algorithm for anthropomorphic dual-arm robotic systems to find paths that mimics the movements of real human beings by using first-order synergies (correlations between joint velocities). The key idea of the proposal is to convert captured human movements into a vector field of velocities, defined in the configuration space of the robot, and use it to guide the search of a solution path. The motion planning is solved using the proposed algorithm, called FOS-BKPIECE, that is a bidirectional version of the KPIECE planner working with an improved version of the extension procedure of the VF-RRT planner. The obtained robot movements follow the directions of the defined vector field and hence allow the robot to solve the task in a human-like fashion. The paper presents a description of the proposed approach as well as results from conceptual and application examples, the latter using a real anthropomorphic dual-arm robotic system. A thorough comparison with other previous planning algorithms shows that the proposed approach obtains better results.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

First-order synergies for motion planning of anthropomorphic dual-arm robots

  • García Hidalgo, Néstor
  • Suárez Feijóo, Raúl
  • Rosell Gratacòs, Jan
This paper addresses the problem of designing a planning algorithm for anthropomorphic dual-arm robotic systems to find paths that mimics the movements of real human beings by using first-order synergies (correlations between joint velocities). The key idea of the proposal is to convert captured human movements into a vector field of velocities, defined in the configuration space of the robot, and use it to guide the search of a solution path. The motion planning is solved using the proposed algorithm, called FOS-BKPIECE, that is a bidirectional version of the KPIECE planner working with an improved version of the extension procedure of the VF-RRT planner. The obtained robot movements follow the directions of the defined vector field and hence allow the robot to solve the task in a human-like fashion. The paper presents a description of the proposed approach as well as results from conceptual and application examples, the latter using a real anthropomorphic dual-arm robotic system. A thorough comparison with other previous planning algorithms shows that the proposed approach obtains better results., Postprint (published version)