Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Evaluating the impact of the weather conditions on the influenza propagation

  • Expósito Singh, David
  • Marinescu, María Cristina
  • Carretero Pérez, Jesús
We show that the simulation results have the same propagation shape as the weekly influenza rates asrecorded by SISSS. We perform experiments for a realistic scenario based on actual meteorological data from2010-2011, and for synthetic values assumed under simplified predicted climate change conditions. Results show thata diminishing relative humidity of 10% produces an increment of about 1.6% in the final infection rate. The effect oftemperature changes on the infection spread is also noticeable, with a decrease of 1.1% per extra degree.Conclusions: Using a tool like ours could help predict the shape of developing epidemics and its peaks, and wouldpermit to quickly run scenarios to determine the evolution of the epidemic under different conditions. We makeEpiGraph source code and epidemic data publicly available, This work has been partially supported by the Spanish “Ministerio de Economía y Competitividad” under the project grant TIN2016-79637-P “Towards Unification of HPC and Big Data paradigms”. The work of Maria-Cristina Marinescu has been partially supported by the H2020 European project GrowSmarter under project grant ref. 646456. The role of both funders was limited to financial support and did not imply participation of any kind in the study and collection, analysis, and interpretation of data, nor in the writing of the manuscript
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Representing Urban Geometries for Unstructured Mesh Generation

  • Gargallo-Peiró, Abel
  • Folch, Arnau|||0000-0002-0677-6366
  • Roca, Xevi
We present a robust and automatic method to generate an idealized surface geometry of a city landscape ready to be meshed for computer simulations. The city geometry is idealized for non viscous flow simulations and targets two main geometrical features: the topography and the city blocks. The procedure is fully automatic and demands no human interaction given the following source data: the city cadastre, a Digital Elevation Model (DEM) of all the target domain, and Light Detection And Ranging (LiDAR) data of the domain region covered by the cadastre. The geometry representation takes three main steps. First, a 2D mesh of the cadastre is generated, where the elements are marked according to street and block regions. Second, using a DEM of the city landscape the topography surface mesh is generated by finding the best surface mesh in the least-squares sense obtained by deforming the previous 2D mesh. Third, we extrude the block facades and we compute a planar ceiling taking into account all the buildings belonging to that city block. We describe the applicability of the geometry representation by presenting the work-flow required to generate an unstructured mesh valid for non-viscous flow or transport simulations. Finally, we illustrate the main application by obtaining a surface and tetrahedral mesh for the city of Barcelona in Spain., This work has been developed in the context of the EU H2020 GrowSmarter project which has Barcelona as one of the three lighthouse cities. The work of the last author was supported by the European Commission through the Marie Sklodowska-Curie Actions (HiPerMeGaFlows project)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Optimal Energy Management System applied to commercial self-consumption solutions

  • Sola Saura, Alaia
  • Igualada González, Lucía|||0000-0001-7718-5283
  • Corchero García, Cristina|||0000-0002-8465-0830
IREMS, an optimization model developed to manage self-consumption solutions and overcome the limitations the commercial management functionalities present has been validated under the conditions of one of the real installations in Barcelona where the software has been installed. The aim of this paper is to perform and present a comparative analysis of the differences in battery performance and electricity purchase between the use of commercial management functionalities for PV self-consumption systems and the more advanced functionalities IREMS offers for this type of solutions.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaluating the impact of the weather conditions on the influenza propagation

  • Singh, David E.
  • Marinescu, Maria Cristina
  • Carretero Pérez, Jesús
  • Delgado Sanz, Concepción
  • Gómez Barroso, Diana
  • Larrauri Cámara, Amparo
Background: Predicting the details of how an epidemic evolves is highly valuable as health institutions need to better plan towards limiting the infection propagation effects and optimizing their prediction and response capabilities. Simulation is a cost- and time-effective way of predicting the evolution of the infection as the joint influence of many different factors: interaction patterns, personal characteristics, travel patterns, meteorological conditions, previous vaccination, etc. The work presented in this paper extends EpiGraph, our influenza epidemic simulator, by introducing a meteorological model as a modular component that interacts with the rest of EpiGraph’s modules to refine our previous simulation results. Our goal is to estimate the effects of changes in temperature and relative humidity on the patterns of epidemic influenza based on data provided by the Spanish Influenza Sentinel Surveillance System (SISSS) and the Spanish Meteorological Agency (AEMET). Methods: Our meteorological model is based on the regression model developed by AB and JS, and it is tuned with influenza surveillance data obtained from SISSS. After pre-processing this data to clean it and reconstruct missing samples, we obtain new values for the reproduction number of each urban region in Spain, every 10 minutes during 2011. We simulate the propagation of the influenza by setting the date of the epidemic onset and the initial influenza-illness rates for each urban region. Results: We show that the simulation results have the same propagation shape as the weekly influenza rates as recorded by SISSS. We perform experiments for a realistic scenario based on actual meteorological data from 2010-2011, and for synthetic values assumed under simplified predicted climate change conditions. Results show that a diminishing relative humidity of 10% produces an increment of about 1.6% in the final infection rate. The effect of temperature changes on the infection spread is also noticeable, with a decrease of 1.1% per extra degree. Conclusions: Using a tool like ours could help predict the shape of developing epidemics and its peaks, and would permit to quickly run scenarios to determine the evolution of the epidemic under different conditions. We make EpiGraph source code and epidemic data publicly available., This work has been partially supported by the Spanish “Ministerio de Economía y Competitividad” under the project grant TIN2016-79637-P “Towards Unification of HPC and Big Data paradigms”. The work of Maria-Cristina Marinescu has been partially supported by the H2020 European project GrowSmarter under project grant ref. 646456., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Representing Urban Geometries for Unstructured Mesh Generation

  • Gargallo-Peiró, Abel
  • Folch, Arnau
  • Roca, Xevi
We present a robust and automatic method to generate an idealized surface geometry of a city landscape ready to be meshed for computer simulations. The city geometry is idealized for non viscous flow simulations and targets two main geometrical features: the topography and the city blocks. The procedure is fully automatic and demands no human interaction given the following source data: the city cadastre, a Digital Elevation Model (DEM) of all the target domain, and Light Detection And Ranging (LiDAR) data of the domain region covered by the cadastre. The geometry representation takes three main steps. First, a 2D mesh of the cadastre is generated, where the elements are marked according to street and block regions. Second, using a DEM of the city landscape the topography surface mesh is generated by finding the best surface mesh in the least-squares sense obtained by deforming the previous 2D mesh. Third, we extrude the block facades and we compute a planar ceiling taking into account all the buildings belonging to that city block. We describe the applicability of the geometry representation by presenting the work-flow required to generate an unstructured mesh valid for non-viscous flow or transport simulations. Finally, we illustrate the main application by obtaining a surface and tetrahedral mesh for the city of Barcelona in Spain., This work has been developed in the context of the EU H2020 GrowSmarter project which has Barcelona as one of the three lighthouse cities. The work of the last author was supported by the European Commission through the Marie Sklodowska-Curie Actions (HiPerMeGaFlows project)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluating the impact of the weather conditions on the influenza propagation

  • Singh, David E.
  • Marinescu, Maria Cristina
  • Carretero Pérez, Jesús
  • Delgado Sanz, Concepción
  • Gómez Barroso, Diana
  • Larrauri Cámara, Amparo
Background: Predicting the details of how an epidemic evolves is highly valuable as health institutions need to better plan towards limiting the infection propagation effects and optimizing their prediction and response capabilities. Simulation is a cost- and time-effective way of predicting the evolution of the infection as the joint influence of many different factors: interaction patterns, personal characteristics, travel patterns, meteorological conditions, previous vaccination, etc. The work presented in this paper extends EpiGraph, our influenza epidemic simulator, by introducing a meteorological model as a modular component that interacts with the rest of EpiGraph’s modules to refine our previous simulation results. Our goal is to estimate the effects of changes in temperature and relative humidity on the patterns of epidemic influenza based on data provided by the Spanish Influenza Sentinel Surveillance System (SISSS) and the Spanish Meteorological Agency (AEMET). Methods: Our meteorological model is based on the regression model developed by AB and JS, and it is tuned with influenza surveillance data obtained from SISSS. After pre-processing this data to clean it and reconstruct missing samples, we obtain new values for the reproduction number of each urban region in Spain, every 10 minutes during 2011. We simulate the propagation of the influenza by setting the date of the epidemic onset and the initial influenza-illness rates for each urban region. Results: We show that the simulation results have the same propagation shape as the weekly influenza rates as recorded by SISSS. We perform experiments for a realistic scenario based on actual meteorological data from 2010-2011, and for synthetic values assumed under simplified predicted climate change conditions. Results show that a diminishing relative humidity of 10% produces an increment of about 1.6% in the final infection rate. The effect of temperature changes on the infection spread is also noticeable, with a decrease of 1.1% per extra degree. Conclusions: Using a tool like ours could help predict the shape of developing epidemics and its peaks, and would permit to quickly run scenarios to determine the evolution of the epidemic under different conditions. We make EpiGraph source code and epidemic data publicly available., This work has been partially supported by the Spanish “Ministerio de Economía y Competitividad” under the project grant TIN2016-79637-P “Towards Unification of HPC and Big Data paradigms”. The work of Maria-Cristina Marinescu has been partially supported by the H2020 European project GrowSmarter under project grant ref. 646456., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Optimal Energy Management System applied to commercial self-consumption solutions

  • Sola Saura, Alaia
  • Igualada González, Lucía
  • Corchero García, Cristina
IREMS, an optimization model developed to manage self-consumption solutions and overcome the limitations the commercial management functionalities present has been validated under the conditions of one of the real installations in Barcelona where the software has been installed. The aim of this paper is to perform and present a comparative analysis of the differences in battery performance and electricity purchase between the use of commercial management functionalities for PV self-consumption systems and the more advanced functionalities IREMS offers for this type of solutions., Postprint (author's final draft)