Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

3-D scale model study of wave run-up, overtopping and damage in a rubble-mound breakwater subject to oblique extreme wave conditions

  • Santos, João
  • Pedro, Francisco
  • Coimbra, Mário
  • Figuero, A.
  • Fortes, Conceição Juana
  • Sande, José
  • Körner, Moritz
  • Lemos, Rute
  • Bornschein, Antje
  • Weimper, Julius
  • Van den Bos, Jeroen
  • Dost, Bastian
  • Hofland, Bas
  • Carvalho, Rita F.
  • Alvarellos, Alberto
  • Peña González, Enrique
  • Pohl, Reinhard
  • Kerpen, Nils B.
  • Reis, María Teresa
[Abstract]: A set of scale-model tests carried out to enlarge the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater’s trunk armour and roundhead, is presented in this paper. A stretch of a rubble mound breakwater (head and part of the adjoining trunk, with a slope of 1(V):2(H)) was built in a wave basin at the Leibniz University Hannover to assess, under extreme wave conditions (wave steepness of 0.055) with different incident wave angles (from 40º to 90º), the structure behaviour in what concerns wave run-up, wave overtopping and damage progression of the armour layer. Two types of armour elements (rock and Antifer cubes) were tested. Non-intrusive methodologies including a new application of laser scanning technique for the assessment of both armour layer damage and wave run-up and overtopping were used. It is expected that such work will contribute also with data to improve empirical formulas as well as to validate complex numerical model for wave-structure interaction., This work was supported by the European Community’s Horizon 2020 Programme through the grant to the budget of the Integrated Infrastructure Initiative Hydralab+, contract no. 654110.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

3D survey modelling for damage assessment in rubble-mound breakwaters under oblique wave incidence

  • Lemos, Rute
  • Peña González, Enrique
  • Santos, João
  • Sande, José
  • Figuero, A.
  • Alvarellos, Alberto
  • Laíño Rebollido, Emilio
  • Reis, María Teresa
  • Fortes, Conceição Juana
  • Kerpe, Nils B.
  • Coelho, Ricardo
[Abstract]: Several authors have proposed guidelines on how to consider the effects of oblique waves on the stability of armour layers of rubble-mound breakwaters. Especially for very oblique waves, for which the increase in stability is the largest, limited data are available. Under the scope of the HYDRALAB+ transnational access project “RODBreak”, experiments were conducted in a tank at the Marienwerder facilities of the Leibnitz University Hannover (LUH), comprising measurements of sea waves, run-up, overtopping and armour layer damage of a rubble-mound breakwater under oblique extreme wave conditions. This paper focuses on the analysis of damage evolution of the breakwater roundhead subject to these conditions, on the novelty of the non-intrusive survey methodologies and on the advance in knowledge on roundhead stability., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 654110, HYDRALAB+.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Developments in acoustics for studying wave-driven boundary layer flow and sediment dynamics over rippled sand-beds

  • Thorne, Peter D.
  • Hurther, David
  • Cooke, Richard D.
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Barraud, P.A.
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
The processes of sediment entrainment, transport, and deposition over bedforms are highly dynamic and temporally and spatially variable. Obtaining measurements to understand these processes has led to ongoing developments in instrumentation for studying near-bed sediment dynamics, with the outputs applied to the development and assessment of sediment transport modelling. In the present study results are reported from three acoustic systems deployed to make observations of bedforms, bedload, suspended concentration and horizontal and vertical velocity components. To evaluate the instruments a series of near-bed boundary layer measurements were collected in a large scale flume facility over a rippled bed of medium sand under regular waves. The observations were conducted as part of Joint Research Activities within the EU funded Hydralab project. The suite of acoustic instruments consisted of a Bedform And Suspended Sediment Imager, BASSI, a three dimensional acoustic ripple profiler, 3D-ARP, and three Acoustic Concentration and Velocity Profilers, ACVP's. Here results are reported from the deployment of the instruments, to illustrate the ongoing developments in acoustics and the expanding capability of the application of acoustics to the study of near-bed flow and sediment dynamics., The technical support provided by UPC for this instrument flume study is appreciated. Dr Paul Bell of the National Oceanography Centre, UK, is thanked for his software development for interpretation of the 3D-ARP data. The study was supported by the EU Joint Research Activities WISE and COMPLEX respectively part of HydralabIV, contract number 261520 and Hydralab+ contract number 261520 and NOC-NERC, UK, Marine Physics and Ocean Climate National Capability funds, and by the French DGA funded ANR-ASMA project MESURE (no. ANR-16-ASMA-0005-01). The authors thank the reviewers for their constructive contribution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Measurements and modeling of sediment transport during offshore and onshore bar migration

  • Grossmann, Florian|||0000-0002-1037-2372
  • Hurther, David
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Alsina Torrent, José María|||0000-0002-3055-5379
Effective design of interventions in the coastal zone (flood defense, nourishments, etc.) requires understanding of long term coastal evolution. Historically, such evolution has been difficult to model because of different processes in storms and calm conditions, and the specific calibration factors required. This knowledge gap partly resulted from difficulties in measuring bedload and accretive transport processes at high detail. In the present study such measurements were obtained in the shoaling and outer surf zone of large-scale wave flume experiments with offshore-/onshore-migrating breaker bars. Physical insight from the measurements guided model decisions in a practical modeling approach separating bedload and suspended load but using the same calibration for storm and calm conditions. As a result, good replication (most tests within factor 2) of measured transport rates is obtained on the basis of free stream velocities. Identified priorities for development include parametrization of hydraulic roughness and wave breaking’s influences on entrainment and suspension., The experiments described in this work were funded by the EU Horizon 2020 Research and Innovation Programme through HYDRALAB+ Contract no. 654110. FG acknowledges PhD funding from the Agency for Management of University and Research Grants (AGAUR). Further funding was provided by the REST-COAST project which receives funding from the EU Horizon 2020 Research and Innovation Programme under Grant Agreement number 101037097.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Sand transport processes and bed level changes induced by two alternating laboratory swash events

  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Eichentopf, Sonja
  • Ribberink, Jan
  • Werf, Jebbe J. van der
  • Alsina Torrent, José María|||0000-0002-3055-5379
Sand transport processes and net transport rates are studied in a large-scale laboratory swash zone. Bichromatic waves with a phase modulation were generated, producing two continuously alternating swash events that have similar offshore wave statistics but which differ in terms of wave-swash interactions. Measured sand suspension and sheet flow dynamics show strong temporal and spatial variability, related to variations in flow velocity and locations of wave capture and wave-backwash interactions. Suspended and sheet flow layer transport rates in the lower swash zone are generally of same magnitude, but sheet flow exceeds the suspended load transport by up to a factor four during the early uprush. The bed level near the inner surf zone is relatively steady during a swash cycle, but changes of (cm/s) are measured near the mid swash zone where wave-swash interactions lead to strongly non-uniform flows. The two alternating swash events produce a dynamic equilibrium, with bed level changes up to a few mm induced by single swash events, but with net morphodynamic change over multiple events that is two orders of magnitude lower. Most of the intra-swash and the single-event-averaged bed level changes in the swash zone are caused by a redistribution of sediment within the swash. The transport of sediment across the surf-swash boundary is minor at intra-swash time scale, but becomes increasingly significant at swash-averaged time scales or longer (i.e., averaged over multiple swash events)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

MODEX: Laboratory experiment exploring sediment spreading of a mound under waves and currents

  • de Schipper, Matthieu
  • Hopkins, Julia
  • Wengrove, Meagan E.
  • Saxoni, Ioanna
  • Kleinhans Maarten, G.
  • Senechal, Nadia
  • Castelle, Bruno
  • Ribas Prats, Francesca|||0000-0003-4701-5982
  • Ruessink, Gerben
  • Murphy, Brendan
  • McLelland, Stuart J.
The dispersal of sand from submerged mounds in the nearshore is driven by the interplay of processes such as converging and recirculating flows, changing roughness, bed slope effects and wave focusing/refraction. This morphological diffusivity is key to understanding sand bars in shallow seas, tidal inlets, estuaries, and the nearshore response to human interventions such as nourishments and dredging. Most of the work on the evolution of submerged mounds has been based on fluvial studies, focusing on flow without waves. In these cases, circular mounds tend to deform to crescentic (barchan) shapes. In contrast, observations of sandbars and berms in the nearshore subjected to waves show much more complex translation and deformation behavior. This contribution introduces the laboratory MOrphological Diffusivity Experiment (MODEX) aimed at examining morphological diffusivity under different forcing conditions. The experiment particularly addresses the linkages between small scale (local) effects (e.g. bed slope, bedforms) on the adjustment of sandy mounds., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Coarse sand transport processes in the ripple vortex regime under asymmetric nearshore waves

  • Fritsch, Noemie
  • Fromant, Guillaume
  • Hurther, David
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
Large-scale wave flume experiments are conducted in the ripple vortex regime to study near bed coarse sand transport processes below asymmetric surface waves typical of the coastal nearshore region. For this purpose, a set of complementary acoustic instruments were deployed under regular nearshore wave conditions. Time-resolved velocity, sand concentration and sand flux profiles are measured across both the dense bedload and dilute suspension layers with an Acoustic Concentration and Velocity Profiler. The equilibrium 2D suborbital ripples are in good agreement in terms of dimensions, shape and onshore migration rate with Wang and Yuan (2018, https://doi.org/10.1029/2018jc013810, 2020, https://doi.org/10.1016/j.coastaleng.2019.103583). Stoss ripple vortex entrainment around the trough-to-crest flow reversal (FR+) is found to be more energetic in terms of sand pick-up into suspension compared to the counter rotating lee side vortex around the FR- flow reversal, as a consequence of the onshore skewed wave acceleration. Ripple vortex driven nearbed velocity phase leads around both flow reversals exceed typical bed friction induced values found in turbulent Wave Boundary Layers. Intrawave sand erosion events can be distinguished locally at the two ripple vortex positions around the flow reversals and two events more uniformly distributed along the ripple profile at wave crest and trough. Spatial fields of sand flux reveal the origin of the net onshore directed suspended and bedload transport. Good agreement is found with the mechanism identified under asymmetric oscillatory flows in Wang and Yuan (2020, https://doi.org/10.1016/j.coastaleng.2019.103583). Differences with ripple vortex regime under skewed shoaling waves and symmetric oscillatory flows are highlighted., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The effect of air bubbles on optical backscatter sensor measurements under plunging breaking waves

  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Alsina Torrent, José María|||0000-0002-3055-5379
  • Van der Zanden, Joep
  • Van Der A, Dominic
  • Ribberink, Jan
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
Accurate suspended sediment concentration measurements are key to understand and quantify the sediment transport patterns in the surf and swash zones. One of the most widely used instruments to collect suspended sediment concentrations is the Optical Backscatter Sensor (OBS). However, the OBS is known to give erroneous readings when deployed in bubbly environments like the surf zone. The present study aims to quantify the influence of an aerated wave breaking environment on the OBS sediment concentration measurements. Experiments are performed in a large wave flume, which ensures full air entrapment under plunging breaking waves, and avoids scale effects that could affect the volume of entrapped air, the air bubble penetration depth and the residence time of air bubbles in the post-breaking turbulent eddies. OBS measurements are obtained at 66 locations along a fixed bed profile for 14 regular breaking wave conditions. In the absence of suspended sediment particles, OBS voltage measurements are used as a proxy for air bubble content. The presented OBS results show peaks up to 1.49 V (31% of the OBS measurement range, corresponding to 16 g/l for sediment with d50 = 0.25 mm) produced by air bubbles in the most energetic tested wave breaking conditions, while the maximum time-averaged value obtained is 0.48 V (10% of the OBS measurement range, corresponding to 5 g/l). The results highlight the importance of considering the presence of air bubbles where OBS are deployed to measure suspended sediment concentrations. A good correlation is found between the breaker depth index and the air bubble distribution and two predictive formulas are derived to forecast the area of air bubble influence in the surf zone., We offer our gratitude to the CIEM staff, especially to Joaquim Sospedra for his endurance and leadership. The work described in this paper was supported by the European Community’s Horizon 2020 Programme by means of the Hydralab+ Project (contract number 654110). This paper contributes to the Hydralab+ legacy together with a set of coordinated papers in other journals. Finally we acknowledge the economical funding and support received by the Secretaria d´Universitats i Recerca del Dpt. d´Economia i Coneixement de la Generalitat de Catalunya (Ref. 2017SGR00773)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SPH simulation of wave breaking over a barred beach and comparison with experiments

  • Scandura, Pietro
  • Altomare, Corrado|||0000-0001-8817-0431
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Viccione, Giacomo
  • Van Der A, Dominic
This paper presents an SPH numerical simulation of the hydrodynamics due to monochromatic waves breaking on a rigid barred beach profile. The simulation is compared with large–scale laboratory experiments, in which detailed water surface measurements were made at 22 cross-shore locations. The results include wave heights, and the phase-averaged velocity and time-mean velocities along the bar. Overall, the SPH model is able to reproduce several features of this complex flow. Information about the correct setup of an SPH simulation to accurately reproduce the physical processes involved in the wave breaking is also reported. The results show that a recirculating cell, just above the bar through, is generated because of wave breaking. The flow in this cell contributes to the growth of the bar when the bed is made up of mobile material., The experiments were supported by the European Community’s Horizon 2020 Programme through the grant to the budget of the integrated infrastructure initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project HYBRID. P.S. acknowledges the support received from the University of Catania through the funding of the research project ‘Valutazione del rischio idraulico in sistemi complessi (VARIO)’. G.V. acknowledges the support received from the University of Salerno through the funding of the research project ‘Analisi del comportamento di flussi geofisici a superficie libera’. Dr. Corrado Altomare acknowledges funding from Spanish government and the European Social Found (ESF) under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/ 10.13039/501100011033).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Wave boundary layer hydrodynamics and sheet flow properties under large-scale plunging-type breaking waves

  • Fromant, Guillaume
  • Hurther, David
  • Van der Zanden, Joep
  • Van Der A, Dominic
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • O'Donoghue, Tom
  • Ribberink, Jan
Wave boundary layer (WBL) dynamics are measured with an Acoustic Concentration and Velocity Profiler (ACVP) across the sheet flow-dominated wave-breaking region of regular large-scale waves breaking as a plunger over a developing breaker bar. Acoustic sheet flow measurements are first evaluated quantitatively in comparison to Conductivity Concentration Meter (CCM+) data used as a reference. The near-bed orbital velocity field exhibits expected behaviors in terms of wave shape, intrawave WBL thickness, and velocity phase leads. The observed fully turbulent flow regime all across the studied wave-breaking region supports the model-predicted transformation of free-stream velocity asymmetry into near-bed velocity skewness inside the WBL. Intrawave concentration dynamics reveal the existence of a lower pickup layer and an upper sheet flow layer similar to skewed oscillatory sheet flows, and with similar characteristics in terms of erosion depth and sheet flow layer thickness. Compared to the shoaling region, differences in terms of sheet flow and hydrodynamic properties of the flow are observed at the plunge point, attributed to the locally enhanced wave breaker turbulence. The ACVP-measured total sheet flow transport rate is decomposed into its current-, wave-, and turbulence-driven components. In the shoaling region, the sand transport is found to be fully dominated by the onshore skewed wave-driven component with negligible phase lag effects. In the outer surf zone, the total net flux exhibits a three-layer vertical structure typical of skewed oscillatory sheet flows. However, in the present experiments this structure originates from offshore-directed undertow-driven flux, rather than from phase lag effects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An inter-model comparison for wave interactions with sea dikes on shallow foreshores

  • Gruwez, Vincent
  • Altomare, Corrado|||0000-0001-8817-0431
  • Suzuki, T.
  • Streicher, Maximilian
  • Cappietti, Lorenzo
  • Kortenhaus, Andreas
  • Troch, Peter
Three open source wave models are applied in 2DV to reproduce a large-scale wave flume experiment of bichromatic wave transformations over a steep-sloped dike with a mildly-sloped and very shallow foreshore: (i) the Reynolds-averaged Navier–Stokes equations solver interFoam of OpenFOAM® (OF), (ii) the weakly compressible smoothed particle hydrodynamics model DualSPHysics (DSPH) and (iii) the non-hydrostatic nonlinear shallow water equations model SWASH. An inter-model comparison is performed to determine the (standalone) applicability of the three models for this specific case, which requires the simulation of many processes simultaneously, including wave transformations over the foreshore and wave-structure interactions with the dike, promenade and vertical wall. A qualitative comparison is done based on the time series of the measured quantities along the wave flume, and snapshots of bore interactions on the promenade and impacts on the vertical wall. In addition, model performance and pattern statistics are employed to quantify the model differences. The results show that overall, OF provides the highest model skill, but has the highest computational cost. DSPH is shown to have a reduced model performance, but still comparable to OF and for a lower computational cost. Even though SWASH is a much more simplified model than both OF and DSPH, it is shown to provide very similar results: SWASH exhibits an equal capability to estimate the maximum quasi-static horizontal impact force with the highest computational efficiency, but does have an important model performance decrease compared to OF and DSPH for the force impulse., This research was part of the CREST (Climate REsilient CoaST) project (http://www.crestproject.be/en), funded by the Flemish Agency for Innovation by Science and Technology, grant number 150028. The work described in this section was supported by the European Community′s Horizon 2020 Research and Innovation Programme through the grant to HYDRALABPLUS, Contract no. 654110. C.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie, grant number 792370., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Near-bed sediment transport during offshore bar migration in large-scale experiments

  • Grossmann, Florian|||0000-0002-1037-2372
  • Hurther, David
  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Alsina Torrent, José María|||0000-0002-3055-5379
This study presents novel insights into hydrodynamics and sediment fluxes in large-scale laboratory experiments with bichromatic wave groups on a relatively steep initial beach slope (1:15). An Acoustic Concentration and Velocity Profiler provided detailed information of velocity and sand concentration near the bed from shoaling up to the outer breaking zone including suspended sediment and sheet flow transport. The morphological evolution was characterized by offshore migration of the outer breaker bar. Decomposition of the total net transport revealed a balance of onshore-directed, short wave-related and offshore-directed, current-related net transport. The short wave-related transport mainly occurred as bedload over small vertical extents. It was linked to characteristic intrawave sheet flow layer expansions during short wave crests. The current-related transport rate featured lower maximum flux magnitudes but occurred over larger vertical extents. As a result, it was larger than the short wave-related transport rate in all but one cross-shore position, driving the bar’s offshore migration. Net flux magnitudes of the infragravity component were comparatively low but played a nonnegligible role for total net transport rate in certain cross-shore positions. Net infragravity flux profiles sometimes featured opposing directions over the vertical. The fluxes were linked to a standing infragravity wave pattern and to the correlation of the short wave envelope, controlling suspension, with the infragravity wave velocity., The experiments described in this study were funded by the European Community’s Horizon 2020 Program through the grant to the budget of the Integrated Infrastructure Initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project RESIST. FG acknowledges funding from the Agency for Management of University and Research Grants (AGAUR). DH acknowledges funding from the French DGA funded ANR ASTRID Maturation project MESURE (ANR-16-ASMA-0005-01). JA acknowledges funding from the Serra Húnter Program (SHP). The authors wish to thank fellow RESIST researchers and the CIEM staff (Joaquim Sospedra, Oscar Galego, Dr. Andrea Marzeddu) for their contributions to the experiments., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Ship manoeuvring effects on propeller induced erosion

  • Mujal Colilles, Anna|||0000-0003-0139-3849
  • Llull Marroig, Antoni Ignaci|||0000-0002-4234-4173
  • Castells Sanabra, Marcel·la|||0000-0002-9038-3126
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
  • Martínez de Osés, Francesc Xavier|||0000-0001-9997-6246
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
The shipping industry evolution over the last decades has led to growing structural and operational problems, in particular, for old marinas with lower depths to hosts present ships and with higher drafts and power of engines. The increase in capacity, size, power and self-propulsion of present ships is the main cause behind morphodynamic sea bed changes in harbour basins. This is producing two different but linked problems: scouring effects near the structures, affecting their stability, and sedimentation of the scoured material in other areas of the basin that reduces the average depth of the basin and the ship motions become uncontrollable. The present contribution aims to compare two different manoeuvring situations in a confined scenario, using laboratory data. Laboratory experiments have been carried out at the Marine Engineering Laboratory facility LaBassa. The two manoeuvring situations, modelled at bollard pull condition are permanent docking/backward and permanent undocking/forward using three different propeller revolutions at a fixed pitch angle and blade area ratio and two fixed locations of the propellers from the wall. The potential erosion is measured through an ecosound scanner of the control area over a homogeneous sandy bed. The evolution of the maximum erosion depth behaviour is completely different for undocking and docking operations. Undocking/backward results show higher depths at the initial stages reaching an almost asymptotic state at the end of the experiments whereas maximum erosion depth during forward operations increases monotonically over time.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Validation of RANS modelling for wave interactions with sea dikes on shallow foreshores using a large-scale experimental dataset

  • Gruwez, Vincent
  • Altomare, Corrado|||0000-0001-8817-0431
  • Suzuki, T.
  • Streicher, Maximilian
  • Cappietti, Lorenzo
  • Kortenhaus, Andreas
  • Troch, Peter
In this paper, a Reynolds-averaged Navier–Stokes (RANS) equations solver, interFoam of OpenFOAM®, is validated for wave interactions with a dike, including a promenade and vertical wall, on a shallow foreshore. Such a coastal defence system is comprised of both an impermeable dike and a beach in front of it, forming the shallow foreshore depth at the dike toe. This case necessitates the simulation of several processes simultaneously: wave propagation, wave breaking over the beach slope, and wave interactions with the sea dike, consisting of wave overtopping, bore interactions on the promenade, and bore impacts on the dike-mounted vertical wall at the end of the promenade (storm wall or building). The validation is done using rare large-scale experimental data. Model performance and pattern statistics are employed to quantify the ability of the numerical model to reproduce the experimental data. In the evaluation method, a repeated test is used to estimate the experimental uncertainty. The solver interFoam is shown to generally have a very good model performance rating. A detailed analysis of the complex processes preceding the impacts on the vertical wall proves that a correct reproduction of the horizontal impact force and pressures is highly dependent on the accuracy of reproducing the bore interactions., This research was part of the CREST (Climate REsilient CoaST) project (http://www.crestproject.be/en), funded by the Flemish Agency for Innovation by Science and Technology, grant number 150028. The work described in this section was supported by the European Community’s Horizon 2020 Research and Innovation Programme through the grant to HYDRALABPLUS, Contract no. 654110. C.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie, grant number 792370., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A ferrofluid-based sensor to measure bottom shear stresses under currents and waves

  • Musumerci, Rosaria
  • Marletta, Vincenzo
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Foti, Enrico
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Hydraulic Research on 2018, available online at: http://www.tandfonline.com/10.1080/00221686.2017.1397779, The measurement of the near-bottom flow characteristics is crucial to correctly understand coastal processes. To overcome some of the limits of present state-of-the-art measuring instruments, we propose a novel approach to measure bottom shear stress under currents and waves based on the exploitation of magneto-rheological fluids, named ferrofluids. In particular, the deformation of a magnetically controlled ferrofluid drop O(0.01 ml) is transformed by a conditioning circuit into an output voltage which is proportional to the bottom shear stress. Calibration curves are presented for both steady-current and regular wave conditions, over fixed and weakly mobile beds, showing that the behaviour of the proposed measuring system can be assumed linear. In the range of the investigated parameters, it is shown that the working range is comprised between 0.08 N m-2 and an upper limit which is a function of the controlling magnetic field and the flow type., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effect of wave storm representation on damage measurements of breakwaters

  • Marzeddu, Andrea|||0000-0001-9515-7323
  • Oliveira, Tiago C.A.
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
In this work, the effects of storm representation on damage measurements of a breakwater are studied in a small-scale physical wave flume. In particular, a two-layer breakwater with cubic armor units randomly placed is considered. A storm recorded in the Mediterranean Sea is the basis to analyze the armor layer damage. Storm sea states are represented in the laboratory using four different methodologies: i) Real storm methodology (RSM, used here as benchmark test) ii) Classical methodology (CM) iii) Equivalent Magnitude Storm with a triangular shape (EMSI) and iv) Equivalent Magnitude Storm with a trapezoidal shape (EMSA). For the four methodologies, the experiments are repeated five times. Considering laboratory occupation times, results suggest that a minimum of five repetitions of CM should be performed to obtain an average damage value that can represent the average damage given by RSM. Although this recommendation is linked to the tested conditions, it provides useful information to set-up experiments dealing with similar breakwater and wave conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

The MARHIS network: an application to composite modelling for overtopping

  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • López Lara, Javier
  • Marzeddu, Andrea|||0000-0001-9515-7323
  • Alvarez, Alvaro
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
  • Mujal Colilles, Anna|||0000-0003-0139-3849
  • Losada, Iñigo
This paper presents the MARHIS network, an added value aggregation of hydraulic facilities and numerical modelling tools plus field equipment from the Catalonia University of Technology and IH Cantabria. The paper presents the origin and objectives of such a network, emphasizing the applications to coastal harbour and offshore cases. This is based on a summarized description of the facilities and tools in IH Cantabria and LIM-UPC. A summarized description of the third element forming the MARHIS network (CEHIPAR) in Madrid is also presented. The next section deals with a composite modelling approach and how to develop and apply it to a) wave structure interactions and b) sediment propeller interactions. The paper ends with some conclusions about the MARHIS network and the benefits such structure should provide to composite modelling, a tough challenge for present engineering applications.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Near-bed sediment transport processes during onshore bar migration in large-scale experiments: comparison with offshore bar migration

  • Grossmann, Florian|||0000-0002-1037-2372
  • Hurther, David
  • Van der Zanden, Joep
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Alsina Torrent, José María|||0000-0002-3055-5379
Detailed information on nearshore sediment transport processes during onshore bar migration were obtained from large-scale laboratory experiments with bichromatic wave groups on a relatively steep initial beach slope (1:15). Detailed measurements of velocity and sand concentration near the bed from shoaling up to the outer breaking zone including suspended sediment and sheet flow transport are presented. The analysis focuses on onshore migration under an accretive wave condition but comparison to an erosive condition highlights important differences. Decomposition shows that total transport mainly results from a balance of short wave-related, bedload onshore transport and current-related, suspended offshore transport. When comparing the accretive to the more energetic erosive condition, the balance shifts toward onshore transport, and onshore migration, because the short wave-related transport does not decrease as much as the current-related transport. This is related to the effects of skewness and asymmetry combined with less sediment suspension in the water column and undertow magnitude under the accretive condition. Transports from streaming in the wave boundary layer and from infragravity waves become visible but only play a subordinate role. Identified priorities for numerical model development include parametrization of wave nonlinearity effects and better description of wave breaking and its influences on sediment suspension., We thank Dr. Troels Aagaard and another, anonymous reviewer for their valuable comments which helped to improve the manuscript. The experiments described in this work were funded by the European Community's Horizon 2020 Programme through the grant to the budget of the Integrated Infrastructure Initiative HYDRALAB+, Contract 654110, and were conducted as part of the transnational access project RESIST. FG acknowledges funding from the Agency for Management of University and Research Grants (AGAUR). DH acknowledges funding from the French DGA funded ANR ASTRID Maturation project MESURE (ANR-16-ASMA-0005-01). JA acknowledges funding from the Serra Húnter Programme (SHP). We wish to thank fellow RESIST researchers and the CIEM staff (Joaquim Sospedra, Oscar Galego, Dr. Andrea Marzeddu, and Dr. Iván Cáceres) for their contributions to the experiments., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Influence of storm sequencing on breaker bar and shoreline evolution in large-scale experiments

  • Eichentopf, Sonja
  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Baldock, Tom E.
  • Alsina Torrent, José María|||0000-0002-3055-5379
New large-scale experiments on the influence of storm sequencing on beach profile evolution are presented. The experiments comprised three sequences that commenced from the same initial beach profile. Each sequence consisted of two storms of different energy, with each storm followed by a recovery phase. A specific focus of the experiments was the influence of storm chronology as well as the influence of the recovery wave energy and duration on beach evolution. The breaker bar and the shoreline are studied as indicators for the beach response. Both evolve towards an equilibrium location for each wave condition where the breaker bar reaches its equilibrium much faster than the shoreline. Overall, no enhanced beach erosion due to storm sequencing is observed. Despite a similar cumulative wave power of the three sequences, the final beach configuration of each sequence seems to be determined by the last wave condition instead of previous storms. However, storm sequencing is important when the beach profile has not yet fully recovered before being disrupted by the subsequent storm. In this case, the second storm does not necessarily cause further erosion but can result in onshore sediment transport and hence, form part of the recovery. The bulk onshore sediment transport as well as the shoreline recovery rate vary depending on the wave condition and the profile disequilibrium and show a maximum value for a recovery condition with an intermediate wave energy. The very low energy condition that was performed for a long duration (24 hours) generated a near-stationary beach profile with typical features of a reflective beach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Beach profile evolution towards equilibrium from varying initial morphologies

  • Eichentopf, Sonja
  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Alsina Torrent, José María|||0000-0002-3055-5379
The evolution of different initial beach profiles towards the same final beach configuration is investigated based on large-scale experimental data. The same wave condition was performed three times, each time starting from a different initial profile morphology. The three different initial profiles are an intermediate energy profile with an offshore bar and a small swash berm, a plane profile and a low energy profile with a large berm. The three cases evolve towards the same final (equilibrium) profile determined by the same wave condition. This implies that the same wave condition generates different sediment transport patterns. Largest beach changes and differences in hydrodynamics occur in the beginning of the experimental cases, highlighting the coupling between morphology and hydrodynamics for beach evolution towards the same profile. The coupling between morphology and hydrodynamics that leads to the same final beach profile is associated with differences in sediment transport in the surf and swash zone, and is explained by the presence of bar and berm features. A large breaker bar and concave profile promote wave energy dissipation and reduce the magnitudes of the mean near-bed flow velocity close to the shoreline limiting shoreline erosion. In contrast, a beach profile with reflective features, such as a large berm and a small or no bar, increases negative velocity magnitudes at the berm toe promoting shoreline retreat. The findings are summarised in a conceptual model that describes how the beach changes towards equilibrium from two different initial morphologies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Morphodynamics of sandy beaches under the influence of storm sequences: current research status and future needs

  • Eichentopf, Sonja
  • Karunarathna, Harshinie U.
  • Alsina Torrent, José María|||0000-0002-3055-5379
This paper reviews and discusses the current research status, trends, and future needs in the field of beach morphodynamics under the influence of storm sequences. The paper reviews how the three main research methods, field investigations, numerical modelling, and physical modelling, have been used to study beach morphodynamics during storm sequences. Available quantitative definitions of storm sequences at different sites are presented and discussed. It is shown that the definition of storm sequences is site-specific and requires knowledge of the storm climate, beach characteristics, and the temporal scale of beach recovery. Subsequently, the paper brings together currently available approaches aimed at describing the effect of storm sequences on beach erosion in a general way. The importance of storm chronology and the effects of an extreme storm within a sequence of storms are highlighted. Following that, the more poorly studied aspect of beach recovery in between storms within a sequence is discussed. Three indicators for defining beach recovery, namely the shoreline location, sediment volumes, and the beach state, are identified and compared. Finally, important research needs, including the need for detailed physical modelling, are identified., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Large-scale wave breaking over a barred beach: SPH numerical simulation and comparison with experiments

  • Altomare, Corrado|||0000-0001-8817-0431
  • Scandura, Pietro
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Van Der A, Dominic
  • Viccione, Giacomo
Wave breaking plays a crucial role in several areas of interest in coastal engineering, such as flooding, wave loading on structures and coastal morphodynamics. In the present study, Smoothed Particle Hydrodynamics (SPH) simulations of monochromatic waves breaking over a rigid barred beach profile are presented. The numerical results comprise wave heights, phase average velocities, time-averaged velocities, vorticity dynamics, and radiation stress, and are validated versus detailed water surface and velocity measurements carried out in a large-scale laboratory wave flume. The experimental data include velocity profiles below the wave trough measured at 22 cross-shore locations in the bar region using acoustic and optical techniques and water surface elevation measured along the flume using resistive gauges, acoustic gauges and pressure sensors. This study is novel in that it analyses the hydrodynamics of wave breaking at a scale close to natural conditions, thus significantly reducing the scale effects of most previous studies, which were conducted at a much smaller scale. In general, water surface elevation is well reproduced by SPH, but discrepancies with the experiments are observed in the highly aerated breaking region, depending on the measurement technique. The SPH simulation shows that wave breaking generates a recirculating cell, immediately above the trough of the bar. Within this cell, near the bed, the flow is offshore directed, while in the upper part of the water column it is onshore oriented. This flow is probably one of the mechanisms that determine the growth of the bar when the bed is made of mobile material. The time-averaged velocity profiles are reproduced with reasonable accuracy by the numerical model, except at the edges of the bar trough, where discrepancies with respect to the measurements are observed. The numerical results provide detailed information, particularly interesting in areas lacking experimental data. One of the main surprising features revealed by the SPH simulations is the generation of a vortex pair that occurs when the cavities formed by the plunge jet collapse. These vortices can occasionally deform the free surface. Based on the numerical results, an analysis of the terms contributing to radiation stress shows that the product between the horizontal and the vertical velocity components does not make a significant contribution. Through comparisons with the SPH results, it is observed that the linear wave theory provides correct estimates of the radiation stress in the shoaling region sufficiently far from the bar crest, while in the surf zone it reproduces incorrect results. Information about the appropriate SPH model setup to correctly capture the physical processes involved in the breaking phenomenon are also presented., The experiments were supported by the European Community’s Horizon 2020 Programme through the grant to the budget of the integrated infrastructure initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project HYBRID. Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF) under the programme ’Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033). Pietro Scandura acknowledges the support received from the University of Catania, Italy by funding the research project ‘Valutazione del rischio idraulico in sistemi complessi (VARIO)’., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Influence of the initial beach profile on the sediment transport processes during post-storm onshore bar migration

  • Grossmann, Florian|||0000-0002-1037-2372
  • Hurther, David
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Alsina Torrent, José María|||0000-0002-3055-5379
Onshore bar migration is a characteristic bar behavior during post-storm beach recovery. The present large-scale experiments, feature bichromatic wave groups over an initially steep (1:15), fully-evolving beach. The same accretive wave condition is applied on two different post-storm beach profiles featuring outer and inner bars. They are characterized by a larger (smaller) shoreline erosion and a larger (smaller) outer breaker bar located farther away from (closer to) the shoreline depending on the larger (smaller) energy of the storm condition. After a considerable post-storm recovery time, similar equilibrium profiles are obtained, stressing the link between wave condition and equilibrium beach configuration. However, the evolution toward the equilibrium is different and depends on the initial morphological condition (post-storm beach profile). After the larger storm, the morphological evolution is termed accretive merging (AM) and characterized by merging of the two bars (outer bar dissipation). After the smaller storm, the morphological evolution denoted as accretive non-merging (AN) is characterized by onshore migration of the two bars with constant distance between them (bar maintenance). This study focuses on processes around the outer bar. During AN it features wave breaking, causing large suspended net offshore transport. AM, in contrast, mainly features bedload related to short wave asymmetries and low decomposed net transport rate magnitudes. High suspended net offshore transport occurs solely onshore of the outer bar trough. This causes filling of the bar trough and bar dissipation during migration. Additionally, processes around the outer bars are linked to accretion onshore of the bars and at the shoreline., We thank Dr. Tom Baldock and Dr. Marissa Yates for their valuable comments which helped to improve the manuscript. The experiments described in this work were funded by the European Community's Horizon 2020 Programme through the grant to the budget of the Integrated Infrastructure Initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project RESIST. FG acknowledges funding from the Agency for Management of University and Research Grants (AGAUR). DH acknowledges funding from the French DGA funded ANR ASTRID Maturation project MESURE (ANR-16-ASMA-0005-01). JA acknowledges funding from the Serra Húnter Programme (SHP). We wish to thank fellow RESIST researchers and the CIEM staff (Joaquim Sospedra, Oscar Galego, Dr. Andrea Marzeddu and Dr. Iván Cáceres) for their contributions to the experiments., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Spatial and temporal distributions of turbulence under bichromatic breaking waves

  • Van der Zanden, Joep
  • Van Der A, Dominic
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Larsen, Bjarke Eltard
  • Fromant, Guillaume
  • Petrotta, Carmelo
  • Scandura, Pietro
  • Li, Ming
The present study aims to extend insights of surf zone turbulence dynamics to wave groups. In a large-scale wave flume, bichromatic wave groups were produced with 31.5 s group period, 4.2 s mean wave period, and a 0.58 m maximum wave height near the paddle. This condition resulted in plunging-type wave breaking over a fixed, gravel-bed, barred profile. Optic, acoustic and electromagnetic instruments were used to measure the flow and the spatial and temporal distributions of turbulent kinetic energy (TKE). The measurements showed that turbulence in the shoaling region is primarily bed-generated and decays almost fully within one wave cycle, leading to TKE variations at the short wave frequency. The wave breaking-generated turbulence, in contrast, decays over multiple wave cycles, leading to a gradual increase and decay of TKE during a wave group cycle. In the wave breaking region, TKE dynamics are driven by the production and subsequent downward transport of turbulence under the successive breaking waves in the group. Consequently, the maximum near-bed TKE in the breaking region can lag the highest breaking wave by up to 2.5 wave cycles. The net cross-shore transport of TKE is in the shoaling region primarily driven by short-wave velocities and is shoreward-directed; in the wave breaking region, the TKE transport is seaward-directed by the undertow and the long-wave velocities. Downward transport of TKE is driven by the vertical component of the time-averaged flow. The cross-shore and vertical diffusive transport rates are small relative to the advective transport rates., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Wave overtopping at near-vertical seawalls: influence of foreshore evolution during storms

  • Briganti, Riccardo
  • Musumeci, Rosaria Ester
  • Van der Meer, Jentsje
  • Romano, Alessandro
  • Stancanelli, Laura Maria
  • Kudella, Matthias
  • Akbar, Rizki
  • Mukhdiar, Ryard
  • Altomare, Corrado|||0000-0001-8817-0431
  • Suzuki, Tomohiro
  • De Girolamo, Paolo
  • Besio, Giovanni
  • Dodd, Nicholas
  • Zhu, Fangfang
  • Schimmels, Stefan
This work presents the results of an investigation on how wave overtopping at a near-vertical seawall at the back of a sandy foreshore is influenced by sequences of erosive storms. The experiments were carried out in the Large Wave Flume (GWK) at Leibniz University, Hannover (Germany). The tested layout consisted of a near-vertical seawall and a sandy foreshore with an initial slope. Three sequences of idealised erosive storms were simulated. Within each storm both the incident wave conditions and still water level were varied in time to represent high and low tide conditions. Each sequence started from a configuration and the beach was not restored in between storms. The measurements included waves, beach profile, wave overtopping volumes. The profile of the beach was measured after each sea state tested. Wave overtopping at each stage of the tested storms was significantly influenced by bed changes. This was linked to the measured evolution of the beach. Measurements showed that a barred profile developed quickly at the start of each sequence, and scour developed at the toe of the structure during high water level conditions, while accretion or partial backfilling developed during low water level conditions. Due to these processes, the position of a sea state in the tested sequence is shown to be an important factor in determining the wave overtopping volume. Remarkably, when a weaker idealised storm followed a more energetic one, nearly the same level of overtopping was recorded. This is explained by the foreshore erosion, leading to increased water depths and wave heights at the toe of the structure. This finding allows to quantify and to explain the variability of wave overtopping in storms following one another at intervals shorter than the recovery time of the foreshore., The work was supported by the European Union Horizon 2020 Research and Innovation Programme through the grant to HYDRALAB-PLUS, Contract no. 654110. We are grateful to all the staff in GWK for the hard work that made the experiments and analysis possible., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An inter-model comparison for wave interactions with sea dikes on shallow foreshores

  • Gruwez, Vincent
  • Altomare, Corrado
  • Suzuki, T.
  • Streicher, Maximilian
  • Cappietti, Lorenzo
  • Kortenhaus, Andreas
  • Troch, Peter
Three open source wave models are applied in 2DV to reproduce a large-scale wave flume experiment of bichromatic wave transformations over a steep-sloped dike with a mildly-sloped and very shallow foreshore: (i) the Reynolds-averaged Navier–Stokes equations solver interFoam of OpenFOAM® (OF), (ii) the weakly compressible smoothed particle hydrodynamics model DualSPHysics (DSPH) and (iii) the non-hydrostatic nonlinear shallow water equations model SWASH. An inter-model comparison is performed to determine the (standalone) applicability of the three models for this specific case, which requires the simulation of many processes simultaneously, including wave transformations over the foreshore and wave-structure interactions with the dike, promenade and vertical wall. A qualitative comparison is done based on the time series of the measured quantities along the wave flume, and snapshots of bore interactions on the promenade and impacts on the vertical wall. In addition, model performance and pattern statistics are employed to quantify the model differences. The results show that overall, OF provides the highest model skill, but has the highest computational cost. DSPH is shown to have a reduced model performance, but still comparable to OF and for a lower computational cost. Even though SWASH is a much more simplified model than both OF and DSPH, it is shown to provide very similar results: SWASH exhibits an equal capability to estimate the maximum quasi-static horizontal impact force with the highest computational efficiency, but does have an important model performance decrease compared to OF and DSPH for the force impulse., This research was part of the CREST (Climate REsilient CoaST) project (http://www.crestproject.be/en), funded by the Flemish Agency for Innovation by Science and Technology, grant number 150028. The work described in this section was supported by the European Community′s Horizon 2020 Research and Innovation Programme through the grant to HYDRALABPLUS, Contract no. 654110. C.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie, grant number 792370., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Near-bed sediment transport during offshore bar migration in large-scale experiments

  • Grossmann, Florian
  • Hurther, David
  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván
  • Sánchez-Arcilla Conejo, Agustín
  • Alsina Torrent, José María
This study presents novel insights into hydrodynamics and sediment fluxes in large-scale laboratory experiments with bichromatic wave groups on a relatively steep initial beach slope (1:15). An Acoustic Concentration and Velocity Profiler provided detailed information of velocity and sand concentration near the bed from shoaling up to the outer breaking zone including suspended sediment and sheet flow transport. The morphological evolution was characterized by offshore migration of the outer breaker bar. Decomposition of the total net transport revealed a balance of onshore-directed, short wave-related and offshore-directed, current-related net transport. The short wave-related transport mainly occurred as bedload over small vertical extents. It was linked to characteristic intrawave sheet flow layer expansions during short wave crests. The current-related transport rate featured lower maximum flux magnitudes but occurred over larger vertical extents. As a result, it was larger than the short wave-related transport rate in all but one cross-shore position, driving the bar’s offshore migration. Net flux magnitudes of the infragravity component were comparatively low but played a nonnegligible role for total net transport rate in certain cross-shore positions. Net infragravity flux profiles sometimes featured opposing directions over the vertical. The fluxes were linked to a standing infragravity wave pattern and to the correlation of the short wave envelope, controlling suspension, with the infragravity wave velocity., The experiments described in this study were funded by the European Community’s Horizon 2020 Program through the grant to the budget of the Integrated Infrastructure Initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project RESIST. FG acknowledges funding from the Agency for Management of University and Research Grants (AGAUR). DH acknowledges funding from the French DGA funded ANR ASTRID Maturation project MESURE (ANR-16-ASMA-0005-01). JA acknowledges funding from the Serra Húnter Program (SHP). The authors wish to thank fellow RESIST researchers and the CIEM staff (Joaquim Sospedra, Oscar Galego, Dr. Andrea Marzeddu) for their contributions to the experiments., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The MARHIS network: an application to composite modelling for overtopping

  • Sánchez-Arcilla Conejo, Agustín
  • López Lara, Javier
  • Marzeddu, Andrea
  • Alvarez, Alvaro
  • Gironella Cobos, Xavier
  • Mujal Colilles, Anna
  • Losada, Iñigo
This paper presents the MARHIS network, an added value aggregation of hydraulic facilities and numerical modelling tools plus field equipment from the Catalonia University of Technology and IH Cantabria. The paper presents the origin and objectives of such a network, emphasizing the applications to coastal harbour and offshore cases. This is based on a summarized description of the facilities and tools in IH Cantabria and LIM-UPC. A summarized description of the third element forming the MARHIS network (CEHIPAR) in Madrid is also presented. The next section deals with a composite modelling approach and how to develop and apply it to a) wave structure interactions and b) sediment propeller interactions. The paper ends with some conclusions about the MARHIS network and the benefits such structure should provide to composite modelling, a tough challenge for present engineering applications., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SPH simulation of wave breaking over a barred beach and comparison with experiments

  • Scandura, Pietro
  • Altomare, Corrado
  • Cáceres Rabionet, Iván
  • Viccione, Giacomo
  • Van Der A, Dominic
This paper presents an SPH numerical simulation of the hydrodynamics due to monochromatic waves breaking on a rigid barred beach profile. The simulation is compared with large–scale laboratory experiments, in which detailed water surface measurements were made at 22 cross-shore locations. The results include wave heights, and the phase-averaged velocity and time-mean velocities along the bar. Overall, the SPH model is able to reproduce several features of this complex flow. Information about the correct setup of an SPH simulation to accurately reproduce the physical processes involved in the wave breaking is also reported. The results show that a recirculating cell, just above the bar through, is generated because of wave breaking. The flow in this cell contributes to the growth of the bar when the bed is made up of mobile material., The experiments were supported by the European Community’s Horizon 2020 Programme through the grant to the budget of the integrated infrastructure initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project HYBRID. P.S. acknowledges the support received from the University of Catania through the funding of the research project ‘Valutazione del rischio idraulico in sistemi complessi (VARIO)’. G.V. acknowledges the support received from the University of Salerno through the funding of the research project ‘Analisi del comportamento di flussi geofisici a superficie libera’. Dr. Corrado Altomare acknowledges funding from Spanish government and the European Social Found (ESF) under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/ 10.13039/501100011033)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Ship manoeuvring effects on propeller induced erosion

  • Mujal Colilles, Anna
  • Llull Marroig, Antoni Ignaci
  • Castells Sanabra, Marcel·la
  • Gironella Cobos, Xavier
  • Martínez de Osés, Francesc Xavier
  • Sánchez-Arcilla Conejo, Agustín
The shipping industry evolution over the last decades has led to growing structural and operational problems, in particular, for old marinas with lower depths to hosts present ships and with higher drafts and power of engines. The increase in capacity, size, power and self-propulsion of present ships is the main cause behind morphodynamic sea bed changes in harbour basins. This is producing two different but linked problems: scouring effects near the structures, affecting their stability, and sedimentation of the scoured material in other areas of the basin that reduces the average depth of the basin and the ship motions become uncontrollable. The present contribution aims to compare two different manoeuvring situations in a confined scenario, using laboratory data. Laboratory experiments have been carried out at the Marine Engineering Laboratory facility LaBassa. The two manoeuvring situations, modelled at bollard pull condition are permanent docking/backward and permanent undocking/forward using three different propeller revolutions at a fixed pitch angle and blade area ratio and two fixed locations of the propellers from the wall. The potential erosion is measured through an ecosound scanner of the control area over a homogeneous sandy bed. The evolution of the maximum erosion depth behaviour is completely different for undocking and docking operations. Undocking/backward results show higher depths at the initial stages reaching an almost asymptotic state at the end of the experiments whereas maximum erosion depth during forward operations increases monotonically over time., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sand transport processes and bed level changes induced by two alternating laboratory swash events

  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván
  • Eichentopf, Sonja
  • Ribberink, Jan
  • Werf, Jebbe J. van der
  • Alsina Torrent, José María
Sand transport processes and net transport rates are studied in a large-scale laboratory swash zone. Bichromatic waves with a phase modulation were generated, producing two continuously alternating swash events that have similar offshore wave statistics but which differ in terms of wave-swash interactions. Measured sand suspension and sheet flow dynamics show strong temporal and spatial variability, related to variations in flow velocity and locations of wave capture and wave-backwash interactions. Suspended and sheet flow layer transport rates in the lower swash zone are generally of same magnitude, but sheet flow exceeds the suspended load transport by up to a factor four during the early uprush. The bed level near the inner surf zone is relatively steady during a swash cycle, but changes of (cm/s) are measured near the mid swash zone where wave-swash interactions lead to strongly non-uniform flows. The two alternating swash events produce a dynamic equilibrium, with bed level changes up to a few mm induced by single swash events, but with net morphodynamic change over multiple events that is two orders of magnitude lower. Most of the intra-swash and the single-event-averaged bed level changes in the swash zone are caused by a redistribution of sediment within the swash. The transport of sediment across the surf-swash boundary is minor at intra-swash time scale, but becomes increasingly significant at swash-averaged time scales or longer (i.e., averaged over multiple swash events)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Beach profile evolution towards equilibrium from varying initial morphologies

  • Eichentopf, Sonja
  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván
  • Alsina Torrent, José María
The evolution of different initial beach profiles towards the same final beach configuration is investigated based on large-scale experimental data. The same wave condition was performed three times, each time starting from a different initial profile morphology. The three different initial profiles are an intermediate energy profile with an offshore bar and a small swash berm, a plane profile and a low energy profile with a large berm. The three cases evolve towards the same final (equilibrium) profile determined by the same wave condition. This implies that the same wave condition generates different sediment transport patterns. Largest beach changes and differences in hydrodynamics occur in the beginning of the experimental cases, highlighting the coupling between morphology and hydrodynamics for beach evolution towards the same profile. The coupling between morphology and hydrodynamics that leads to the same final beach profile is associated with differences in sediment transport in the surf and swash zone, and is explained by the presence of bar and berm features. A large breaker bar and concave profile promote wave energy dissipation and reduce the magnitudes of the mean near-bed flow velocity close to the shoreline limiting shoreline erosion. In contrast, a beach profile with reflective features, such as a large berm and a small or no bar, increases negative velocity magnitudes at the berm toe promoting shoreline retreat. The findings are summarised in a conceptual model that describes how the beach changes towards equilibrium from two different initial morphologies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Morphodynamics of sandy beaches under the influence of storm sequences: current research status and future needs

  • Eichentopf, Sonja
  • Karunarathna, Harshinie U.
  • Alsina Torrent, José María
This paper reviews and discusses the current research status, trends, and future needs in the field of beach morphodynamics under the influence of storm sequences. The paper reviews how the three main research methods, field investigations, numerical modelling, and physical modelling, have been used to study beach morphodynamics during storm sequences. Available quantitative definitions of storm sequences at different sites are presented and discussed. It is shown that the definition of storm sequences is site-specific and requires knowledge of the storm climate, beach characteristics, and the temporal scale of beach recovery. Subsequently, the paper brings together currently available approaches aimed at describing the effect of storm sequences on beach erosion in a general way. The importance of storm chronology and the effects of an extreme storm within a sequence of storms are highlighted. Following that, the more poorly studied aspect of beach recovery in between storms within a sequence is discussed. Three indicators for defining beach recovery, namely the shoreline location, sediment volumes, and the beach state, are identified and compared. Finally, important research needs, including the need for detailed physical modelling, are identified., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of storm sequencing on breaker bar and shoreline evolution in large-scale experiments

  • Eichentopf, Sonja
  • Van der Zanden, Joep
  • Cáceres Rabionet, Iván
  • Baldock, Tom E.
  • Alsina Torrent, José María
New large-scale experiments on the influence of storm sequencing on beach profile evolution are presented. The experiments comprised three sequences that commenced from the same initial beach profile. Each sequence consisted of two storms of different energy, with each storm followed by a recovery phase. A specific focus of the experiments was the influence of storm chronology as well as the influence of the recovery wave energy and duration on beach evolution. The breaker bar and the shoreline are studied as indicators for the beach response. Both evolve towards an equilibrium location for each wave condition where the breaker bar reaches its equilibrium much faster than the shoreline. Overall, no enhanced beach erosion due to storm sequencing is observed. Despite a similar cumulative wave power of the three sequences, the final beach configuration of each sequence seems to be determined by the last wave condition instead of previous storms. However, storm sequencing is important when the beach profile has not yet fully recovered before being disrupted by the subsequent storm. In this case, the second storm does not necessarily cause further erosion but can result in onshore sediment transport and hence, form part of the recovery. The bulk onshore sediment transport as well as the shoreline recovery rate vary depending on the wave condition and the profile disequilibrium and show a maximum value for a recovery condition with an intermediate wave energy. The very low energy condition that was performed for a long duration (24 hours) generated a near-stationary beach profile with typical features of a reflective beach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A ferrofluid-based sensor to measure bottom shear stresses under currents and waves

  • Musumerci, Rosaria
  • Marletta, Vincenzo
  • Sánchez-Arcilla Conejo, Agustín
  • Foti, Enrico
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Hydraulic Research on 2018, available online at: http://www.tandfonline.com/10.1080/00221686.2017.1397779, The measurement of the near-bottom flow characteristics is crucial to correctly understand coastal processes. To overcome some of the limits of present state-of-the-art measuring instruments, we propose a novel approach to measure bottom shear stress under currents and waves based on the exploitation of magneto-rheological fluids, named ferrofluids. In particular, the deformation of a magnetically controlled ferrofluid drop O(0.01 ml) is transformed by a conditioning circuit into an output voltage which is proportional to the bottom shear stress. Calibration curves are presented for both steady-current and regular wave conditions, over fixed and weakly mobile beds, showing that the behaviour of the proposed measuring system can be assumed linear. In the range of the investigated parameters, it is shown that the working range is comprised between 0.08 N m-2 and an upper limit which is a function of the controlling magnetic field and the flow type., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Validation of RANS modelling for wave interactions with sea dikes on shallow foreshores using a large-scale experimental dataset

  • Gruwez, Vincent
  • Altomare, Corrado
  • Suzuki, T.
  • Streicher, Maximilian
  • Cappietti, Lorenzo
  • Kortenhaus, Andreas
  • Troch, Peter
In this paper, a Reynolds-averaged Navier–Stokes (RANS) equations solver, interFoam of OpenFOAM®, is validated for wave interactions with a dike, including a promenade and vertical wall, on a shallow foreshore. Such a coastal defence system is comprised of both an impermeable dike and a beach in front of it, forming the shallow foreshore depth at the dike toe. This case necessitates the simulation of several processes simultaneously: wave propagation, wave breaking over the beach slope, and wave interactions with the sea dike, consisting of wave overtopping, bore interactions on the promenade, and bore impacts on the dike-mounted vertical wall at the end of the promenade (storm wall or building). The validation is done using rare large-scale experimental data. Model performance and pattern statistics are employed to quantify the ability of the numerical model to reproduce the experimental data. In the evaluation method, a repeated test is used to estimate the experimental uncertainty. The solver interFoam is shown to generally have a very good model performance rating. A detailed analysis of the complex processes preceding the impacts on the vertical wall proves that a correct reproduction of the horizontal impact force and pressures is highly dependent on the accuracy of reproducing the bore interactions., This research was part of the CREST (Climate REsilient CoaST) project (http://www.crestproject.be/en), funded by the Flemish Agency for Innovation by Science and Technology, grant number 150028. The work described in this section was supported by the European Community’s Horizon 2020 Research and Innovation Programme through the grant to HYDRALABPLUS, Contract no. 654110. C.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie, grant number 792370., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The effect of air bubbles on optical backscatter sensor measurements under plunging breaking waves

  • Cáceres Rabionet, Iván
  • Alsina Torrent, José María
  • Van der Zanden, Joep
  • Van Der A, Dominic
  • Ribberink, Jan
  • Sánchez-Arcilla Conejo, Agustín
Accurate suspended sediment concentration measurements are key to understand and quantify the sediment transport patterns in the surf and swash zones. One of the most widely used instruments to collect suspended sediment concentrations is the Optical Backscatter Sensor (OBS). However, the OBS is known to give erroneous readings when deployed in bubbly environments like the surf zone. The present study aims to quantify the influence of an aerated wave breaking environment on the OBS sediment concentration measurements. Experiments are performed in a large wave flume, which ensures full air entrapment under plunging breaking waves, and avoids scale effects that could affect the volume of entrapped air, the air bubble penetration depth and the residence time of air bubbles in the post-breaking turbulent eddies. OBS measurements are obtained at 66 locations along a fixed bed profile for 14 regular breaking wave conditions. In the absence of suspended sediment particles, OBS voltage measurements are used as a proxy for air bubble content. The presented OBS results show peaks up to 1.49 V (31% of the OBS measurement range, corresponding to 16 g/l for sediment with d50 = 0.25 mm) produced by air bubbles in the most energetic tested wave breaking conditions, while the maximum time-averaged value obtained is 0.48 V (10% of the OBS measurement range, corresponding to 5 g/l). The results highlight the importance of considering the presence of air bubbles where OBS are deployed to measure suspended sediment concentrations. A good correlation is found between the breaker depth index and the air bubble distribution and two predictive formulas are derived to forecast the area of air bubble influence in the surf zone., We offer our gratitude to the CIEM staff, especially to Joaquim Sospedra for his endurance and leadership. The work described in this paper was supported by the European Community’s Horizon 2020 Programme by means of the Hydralab+ Project (contract number 654110). This paper contributes to the Hydralab+ legacy together with a set of coordinated papers in other journals. Finally we acknowledge the economical funding and support received by the Secretaria d´Universitats i Recerca del Dpt. d´Economia i Coneixement de la Generalitat de Catalunya (Ref. 2017SGR00773)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Measurements and modeling of sediment transport during offshore and onshore bar migration

  • Grossmann, Florian
  • Hurther, David
  • Sánchez-Arcilla Conejo, Agustín
  • Alsina Torrent, José María
Effective design of interventions in the coastal zone (flood defense, nourishments, etc.) requires understanding of long term coastal evolution. Historically, such evolution has been difficult to model because of different processes in storms and calm conditions, and the specific calibration factors required. This knowledge gap partly resulted from difficulties in measuring bedload and accretive transport processes at high detail. In the present study such measurements were obtained in the shoaling and outer surf zone of large-scale wave flume experiments with offshore-/onshore-migrating breaker bars. Physical insight from the measurements guided model decisions in a practical modeling approach separating bedload and suspended load but using the same calibration for storm and calm conditions. As a result, good replication (most tests within factor 2) of measured transport rates is obtained on the basis of free stream velocities. Identified priorities for development include parametrization of hydraulic roughness and wave breaking’s influences on entrainment and suspension., The experiments described in this work were funded by the EU Horizon 2020 Research and Innovation Programme through HYDRALAB+ Contract no. 654110. FG acknowledges PhD funding from the Agency for Management of University and Research Grants (AGAUR). Further funding was provided by the REST-COAST project which receives funding from the EU Horizon 2020 Research and Innovation Programme under Grant Agreement number 101037097., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of the initial beach profile on the sediment transport processes during post-storm onshore bar migration

  • Grossmann, Florian
  • Hurther, David
  • Sánchez-Arcilla Conejo, Agustín
  • Alsina Torrent, José María
Onshore bar migration is a characteristic bar behavior during post-storm beach recovery. The present large-scale experiments, feature bichromatic wave groups over an initially steep (1:15), fully-evolving beach. The same accretive wave condition is applied on two different post-storm beach profiles featuring outer and inner bars. They are characterized by a larger (smaller) shoreline erosion and a larger (smaller) outer breaker bar located farther away from (closer to) the shoreline depending on the larger (smaller) energy of the storm condition. After a considerable post-storm recovery time, similar equilibrium profiles are obtained, stressing the link between wave condition and equilibrium beach configuration. However, the evolution toward the equilibrium is different and depends on the initial morphological condition (post-storm beach profile). After the larger storm, the morphological evolution is termed accretive merging (AM) and characterized by merging of the two bars (outer bar dissipation). After the smaller storm, the morphological evolution denoted as accretive non-merging (AN) is characterized by onshore migration of the two bars with constant distance between them (bar maintenance). This study focuses on processes around the outer bar. During AN it features wave breaking, causing large suspended net offshore transport. AM, in contrast, mainly features bedload related to short wave asymmetries and low decomposed net transport rate magnitudes. High suspended net offshore transport occurs solely onshore of the outer bar trough. This causes filling of the bar trough and bar dissipation during migration. Additionally, processes around the outer bars are linked to accretion onshore of the bars and at the shoreline., We thank Dr. Tom Baldock and Dr. Marissa Yates for their valuable comments which helped to improve the manuscript. The experiments described in this work were funded by the European Community's Horizon 2020 Programme through the grant to the budget of the Integrated Infrastructure Initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project RESIST. FG acknowledges funding from the Agency for Management of University and Research Grants (AGAUR). DH acknowledges funding from the French DGA funded ANR ASTRID Maturation project MESURE (ANR-16-ASMA-0005-01). JA acknowledges funding from the Serra Húnter Programme (SHP). We wish to thank fellow RESIST researchers and the CIEM staff (Joaquim Sospedra, Oscar Galego, Dr. Andrea Marzeddu and Dr. Iván Cáceres) for their contributions to the experiments., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wave overtopping at near-vertical seawalls: influence of foreshore evolution during storms

  • Briganti, Riccardo
  • Musumeci, Rosaria Ester
  • Van der Meer, Jentsje
  • Romano, Alessandro
  • Stancanelli, Laura Maria
  • Kudella, Matthias
  • Akbar, Rizki
  • Mukhdiar, Ryard
  • Altomare, Corrado
  • Suzuki, Tomohiro
  • De Girolamo, Paolo
  • Besio, Giovanni
  • Dodd, Nicholas
  • Zhu, Fangfang
  • Schimmels, Stefan
This work presents the results of an investigation on how wave overtopping at a near-vertical seawall at the back of a sandy foreshore is influenced by sequences of erosive storms. The experiments were carried out in the Large Wave Flume (GWK) at Leibniz University, Hannover (Germany). The tested layout consisted of a near-vertical seawall and a sandy foreshore with an initial slope. Three sequences of idealised erosive storms were simulated. Within each storm both the incident wave conditions and still water level were varied in time to represent high and low tide conditions. Each sequence started from a configuration and the beach was not restored in between storms. The measurements included waves, beach profile, wave overtopping volumes. The profile of the beach was measured after each sea state tested. Wave overtopping at each stage of the tested storms was significantly influenced by bed changes. This was linked to the measured evolution of the beach. Measurements showed that a barred profile developed quickly at the start of each sequence, and scour developed at the toe of the structure during high water level conditions, while accretion or partial backfilling developed during low water level conditions. Due to these processes, the position of a sea state in the tested sequence is shown to be an important factor in determining the wave overtopping volume. Remarkably, when a weaker idealised storm followed a more energetic one, nearly the same level of overtopping was recorded. This is explained by the foreshore erosion, leading to increased water depths and wave heights at the toe of the structure. This finding allows to quantify and to explain the variability of wave overtopping in storms following one another at intervals shorter than the recovery time of the foreshore., The work was supported by the European Union Horizon 2020 Research and Innovation Programme through the grant to HYDRALAB-PLUS, Contract no. 654110. We are grateful to all the staff in GWK for the hard work that made the experiments and analysis possible., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Near-bed sediment transport processes during onshore bar migration in large-scale experiments: comparison with offshore bar migration

  • Grossmann, Florian
  • Hurther, David
  • Van der Zanden, Joep
  • Sánchez-Arcilla Conejo, Agustín
  • Alsina Torrent, José María
Detailed information on nearshore sediment transport processes during onshore bar migration were obtained from large-scale laboratory experiments with bichromatic wave groups on a relatively steep initial beach slope (1:15). Detailed measurements of velocity and sand concentration near the bed from shoaling up to the outer breaking zone including suspended sediment and sheet flow transport are presented. The analysis focuses on onshore migration under an accretive wave condition but comparison to an erosive condition highlights important differences. Decomposition shows that total transport mainly results from a balance of short wave-related, bedload onshore transport and current-related, suspended offshore transport. When comparing the accretive to the more energetic erosive condition, the balance shifts toward onshore transport, and onshore migration, because the short wave-related transport does not decrease as much as the current-related transport. This is related to the effects of skewness and asymmetry combined with less sediment suspension in the water column and undertow magnitude under the accretive condition. Transports from streaming in the wave boundary layer and from infragravity waves become visible but only play a subordinate role. Identified priorities for numerical model development include parametrization of wave nonlinearity effects and better description of wave breaking and its influences on sediment suspension., We thank Dr. Troels Aagaard and another, anonymous reviewer for their valuable comments which helped to improve the manuscript. The experiments described in this work were funded by the European Community's Horizon 2020 Programme through the grant to the budget of the Integrated Infrastructure Initiative HYDRALAB+, Contract 654110, and were conducted as part of the transnational access project RESIST. FG acknowledges funding from the Agency for Management of University and Research Grants (AGAUR). DH acknowledges funding from the French DGA funded ANR ASTRID Maturation project MESURE (ANR-16-ASMA-0005-01). JA acknowledges funding from the Serra Húnter Programme (SHP). We wish to thank fellow RESIST researchers and the CIEM staff (Joaquim Sospedra, Oscar Galego, Dr. Andrea Marzeddu, and Dr. Iván Cáceres) for their contributions to the experiments., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Large-scale wave breaking over a barred beach: SPH numerical simulation and comparison with experiments

  • Altomare, Corrado
  • Scandura, Pietro
  • Cáceres Rabionet, Iván
  • Van Der A, Dominic
  • Viccione, Giacomo
Wave breaking plays a crucial role in several areas of interest in coastal engineering, such as flooding, wave loading on structures and coastal morphodynamics. In the present study, Smoothed Particle Hydrodynamics (SPH) simulations of monochromatic waves breaking over a rigid barred beach profile are presented. The numerical results comprise wave heights, phase average velocities, time-averaged velocities, vorticity dynamics, and radiation stress, and are validated versus detailed water surface and velocity measurements carried out in a large-scale laboratory wave flume. The experimental data include velocity profiles below the wave trough measured at 22 cross-shore locations in the bar region using acoustic and optical techniques and water surface elevation measured along the flume using resistive gauges, acoustic gauges and pressure sensors. This study is novel in that it analyses the hydrodynamics of wave breaking at a scale close to natural conditions, thus significantly reducing the scale effects of most previous studies, which were conducted at a much smaller scale. In general, water surface elevation is well reproduced by SPH, but discrepancies with the experiments are observed in the highly aerated breaking region, depending on the measurement technique. The SPH simulation shows that wave breaking generates a recirculating cell, immediately above the trough of the bar. Within this cell, near the bed, the flow is offshore directed, while in the upper part of the water column it is onshore oriented. This flow is probably one of the mechanisms that determine the growth of the bar when the bed is made of mobile material. The time-averaged velocity profiles are reproduced with reasonable accuracy by the numerical model, except at the edges of the bar trough, where discrepancies with respect to the measurements are observed. The numerical results provide detailed information, particularly interesting in areas lacking experimental data. One of the main surprising features revealed by the SPH simulations is the generation of a vortex pair that occurs when the cavities formed by the plunge jet collapse. These vortices can occasionally deform the free surface. Based on the numerical results, an analysis of the terms contributing to radiation stress shows that the product between the horizontal and the vertical velocity components does not make a significant contribution. Through comparisons with the SPH results, it is observed that the linear wave theory provides correct estimates of the radiation stress in the shoaling region sufficiently far from the bar crest, while in the surf zone it reproduces incorrect results. Information about the appropriate SPH model setup to correctly capture the physical processes involved in the breaking phenomenon are also presented., The experiments were supported by the European Community’s Horizon 2020 Programme through the grant to the budget of the integrated infrastructure initiative HYDRALAB+, Contract no. 654110, and were conducted as part of the transnational access project HYBRID. Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF) under the programme ’Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033). Pietro Scandura acknowledges the support received from the University of Catania, Italy by funding the research project ‘Valutazione del rischio idraulico in sistemi complessi (VARIO)’., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Coarse sand transport processes in the ripple vortex regime under asymmetric nearshore waves

  • Fritsch, Noemie
  • Fromant, Guillaume
  • Hurther, David
  • Cáceres Rabionet, Iván
Large-scale wave flume experiments are conducted in the ripple vortex regime to study near bed coarse sand transport processes below asymmetric surface waves typical of the coastal nearshore region. For this purpose, a set of complementary acoustic instruments were deployed under regular nearshore wave conditions. Time-resolved velocity, sand concentration and sand flux profiles are measured across both the dense bedload and dilute suspension layers with an Acoustic Concentration and Velocity Profiler. The equilibrium 2D suborbital ripples are in good agreement in terms of dimensions, shape and onshore migration rate with Wang and Yuan (2018, https://doi.org/10.1029/2018jc013810, 2020, https://doi.org/10.1016/j.coastaleng.2019.103583). Stoss ripple vortex entrainment around the trough-to-crest flow reversal (FR+) is found to be more energetic in terms of sand pick-up into suspension compared to the counter rotating lee side vortex around the FR- flow reversal, as a consequence of the onshore skewed wave acceleration. Ripple vortex driven nearbed velocity phase leads around both flow reversals exceed typical bed friction induced values found in turbulent Wave Boundary Layers. Intrawave sand erosion events can be distinguished locally at the two ripple vortex positions around the flow reversals and two events more uniformly distributed along the ripple profile at wave crest and trough. Spatial fields of sand flux reveal the origin of the net onshore directed suspended and bedload transport. Good agreement is found with the mechanism identified under asymmetric oscillatory flows in Wang and Yuan (2020, https://doi.org/10.1016/j.coastaleng.2019.103583). Differences with ripple vortex regime under skewed shoaling waves and symmetric oscillatory flows are highlighted., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

MODEX: Laboratory experiment exploring sediment spreading of a mound under waves and currents

  • de Schipper, Matthieu
  • Hopkins, Julia
  • Wengrove, Meagan E.
  • Saxoni, Ioanna
  • Kleinhans Maarten, G.
  • Senechal, Nadia
  • Castelle, Bruno
  • Ribas Prats, Francesca
  • Ruessink, Gerben
  • Murphy, Brendan
  • McLelland, Stuart J.
The dispersal of sand from submerged mounds in the nearshore is driven by the interplay of processes such as converging and recirculating flows, changing roughness, bed slope effects and wave focusing/refraction. This morphological diffusivity is key to understanding sand bars in shallow seas, tidal inlets, estuaries, and the nearshore response to human interventions such as nourishments and dredging. Most of the work on the evolution of submerged mounds has been based on fluvial studies, focusing on flow without waves. In these cases, circular mounds tend to deform to crescentic (barchan) shapes. In contrast, observations of sandbars and berms in the nearshore subjected to waves show much more complex translation and deformation behavior. This contribution introduces the laboratory MOrphological Diffusivity Experiment (MODEX) aimed at examining morphological diffusivity under different forcing conditions. The experiment particularly addresses the linkages between small scale (local) effects (e.g. bed slope, bedforms) on the adjustment of sandy mounds., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of wave storm representation on damage measurements of breakwaters

  • Marzeddu, Andrea
  • Oliveira, Tiago C.A.
  • Sánchez-Arcilla Conejo, Agustín
  • Gironella Cobos, Xavier
In this work, the effects of storm representation on damage measurements of a breakwater are studied in a small-scale physical wave flume. In particular, a two-layer breakwater with cubic armor units randomly placed is considered. A storm recorded in the Mediterranean Sea is the basis to analyze the armor layer damage. Storm sea states are represented in the laboratory using four different methodologies: i) Real storm methodology (RSM, used here as benchmark test) ii) Classical methodology (CM) iii) Equivalent Magnitude Storm with a triangular shape (EMSI) and iv) Equivalent Magnitude Storm with a trapezoidal shape (EMSA). For the four methodologies, the experiments are repeated five times. Considering laboratory occupation times, results suggest that a minimum of five repetitions of CM should be performed to obtain an average damage value that can represent the average damage given by RSM. Although this recommendation is linked to the tested conditions, it provides useful information to set-up experiments dealing with similar breakwater and wave conditions., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Spatial and temporal distributions of turbulence under bichromatic breaking waves

  • Van der Zanden, Joep
  • Van Der A, Dominic
  • Cáceres Rabionet, Iván
  • Larsen, Bjarke Eltard
  • Fromant, Guillaume
  • Petrotta, Carmelo
  • Scandura, Pietro
  • Li, Ming
The present study aims to extend insights of surf zone turbulence dynamics to wave groups. In a large-scale wave flume, bichromatic wave groups were produced with 31.5 s group period, 4.2 s mean wave period, and a 0.58 m maximum wave height near the paddle. This condition resulted in plunging-type wave breaking over a fixed, gravel-bed, barred profile. Optic, acoustic and electromagnetic instruments were used to measure the flow and the spatial and temporal distributions of turbulent kinetic energy (TKE). The measurements showed that turbulence in the shoaling region is primarily bed-generated and decays almost fully within one wave cycle, leading to TKE variations at the short wave frequency. The wave breaking-generated turbulence, in contrast, decays over multiple wave cycles, leading to a gradual increase and decay of TKE during a wave group cycle. In the wave breaking region, TKE dynamics are driven by the production and subsequent downward transport of turbulence under the successive breaking waves in the group. Consequently, the maximum near-bed TKE in the breaking region can lag the highest breaking wave by up to 2.5 wave cycles. The net cross-shore transport of TKE is in the shoaling region primarily driven by short-wave velocities and is shoreward-directed; in the wave breaking region, the TKE transport is seaward-directed by the undertow and the long-wave velocities. Downward transport of TKE is driven by the vertical component of the time-averaged flow. The cross-shore and vertical diffusive transport rates are small relative to the advective transport rates., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wave boundary layer hydrodynamics and sheet flow properties under large-scale plunging-type breaking waves

  • Fromant, Guillaume
  • Hurther, David
  • Van der Zanden, Joep
  • Van Der A, Dominic
  • Cáceres Rabionet, Iván
  • O'Donoghue, Tom
  • Ribberink, Jan
Wave boundary layer (WBL) dynamics are measured with an Acoustic Concentration and Velocity Profiler (ACVP) across the sheet flow-dominated wave-breaking region of regular large-scale waves breaking as a plunger over a developing breaker bar. Acoustic sheet flow measurements are first evaluated quantitatively in comparison to Conductivity Concentration Meter (CCM+) data used as a reference. The near-bed orbital velocity field exhibits expected behaviors in terms of wave shape, intrawave WBL thickness, and velocity phase leads. The observed fully turbulent flow regime all across the studied wave-breaking region supports the model-predicted transformation of free-stream velocity asymmetry into near-bed velocity skewness inside the WBL. Intrawave concentration dynamics reveal the existence of a lower pickup layer and an upper sheet flow layer similar to skewed oscillatory sheet flows, and with similar characteristics in terms of erosion depth and sheet flow layer thickness. Compared to the shoaling region, differences in terms of sheet flow and hydrodynamic properties of the flow are observed at the plunge point, attributed to the locally enhanced wave breaker turbulence. The ACVP-measured total sheet flow transport rate is decomposed into its current-, wave-, and turbulence-driven components. In the shoaling region, the sand transport is found to be fully dominated by the onshore skewed wave-driven component with negligible phase lag effects. In the outer surf zone, the total net flux exhibits a three-layer vertical structure typical of skewed oscillatory sheet flows. However, in the present experiments this structure originates from offshore-directed undertow-driven flux, rather than from phase lag effects., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Developments in acoustics for studying wave-driven boundary layer flow and sediment dynamics over rippled sand-beds

  • Thorne, Peter D.
  • Hurther, David
  • Cooke, Richard D.
  • Cáceres Rabionet, Iván
  • Barraud, P.A.
  • Sánchez-Arcilla Conejo, Agustín
The processes of sediment entrainment, transport, and deposition over bedforms are highly dynamic and temporally and spatially variable. Obtaining measurements to understand these processes has led to ongoing developments in instrumentation for studying near-bed sediment dynamics, with the outputs applied to the development and assessment of sediment transport modelling. In the present study results are reported from three acoustic systems deployed to make observations of bedforms, bedload, suspended concentration and horizontal and vertical velocity components. To evaluate the instruments a series of near-bed boundary layer measurements were collected in a large scale flume facility over a rippled bed of medium sand under regular waves. The observations were conducted as part of Joint Research Activities within the EU funded Hydralab project. The suite of acoustic instruments consisted of a Bedform And Suspended Sediment Imager, BASSI, a three dimensional acoustic ripple profiler, 3D-ARP, and three Acoustic Concentration and Velocity Profilers, ACVP's. Here results are reported from the deployment of the instruments, to illustrate the ongoing developments in acoustics and the expanding capability of the application of acoustics to the study of near-bed flow and sediment dynamics., The technical support provided by UPC for this instrument flume study is appreciated. Dr Paul Bell of the National Oceanography Centre, UK, is thanked for his software development for interpretation of the 3D-ARP data. The study was supported by the EU Joint Research Activities WISE and COMPLEX respectively part of HydralabIV, contract number 261520 and Hydralab+ contract number 261520 and NOC-NERC, UK, Marine Physics and Ocean Climate National Capability funds, and by the French DGA funded ANR-ASMA project MESURE (no. ANR-16-ASMA-0005-01). The authors thank the reviewers for their constructive contribution., Peer Reviewed, Postprint (author's final draft)
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Living on the edge: How traits of ecosystem engineers drive bio-physical interactions at coastal wetland edges

  • Gilis, L. G.
  • Maza Fernández, María Emilia
  • García-Maribona López-Sela, Julio|||0000-0003-1385-4403
  • López Lara, Javier|||0000-0003-0968-1909
  • Suzuki, T.
  • Argemi Cierco, M.
  • Paul, M.
  • Folkard, A. M.
  • Balke, T.
Salt marshes and mangrove forests provide critical ecosystem services such as reduced sediment erosion and increased hydrodynamic buffering. Sediment transport and hydrodynamics can be influenced by specific functional traits of the plants (for example, flexibility vs. rigidity) and community traits (for example, spatial density). While there is a growing body of literature on plant trait and hydrodynamic interactions, direct comparative studies of sediment transport and scour development in and around intertidal wetland edges are scarce. In this study we systematically compared the effects of plant traits on sediment budgets around the lateral edges of intertidal wetlands under controlled hydrodynamic and sedimentary conditions using full scale vegetation mimics with contrasting flexibilities and densities. Experiments were carried out in a large-scale flume, using two spatial densities each of flexible and rigid vegetation mimics. We measured unconsolidated sedimentary bedlevel changes in experimental runs using waves only, currents only, and waves combined with currents. Both mimic types dampened the energy of the incoming flow, highlighting the role of rigid and flexible aquatic vegetation in providing coastal protection. The rigid vegetation mimics' lateral edge experienced larger velocities, more energetic turbulence, and local scour around individual stems. Scour around stems could influence the lateral expansion of the rigid vegetation ecosystem by reducing sediment stability and thus decreasing seedling establishment success. The flexible plant mimics produced lower turbulence at their leading edge, which resulted in sediment being deposited over a shorter distance into the patch than in the rigid mimics. Decreased vegetation density caused reduced sediment erosion at the leading edge and less sediment accumulation within the vegetation patches for both the rigid and flexible mimics. The hydrodynamic and sedimentary processes identified for both ecosystems are linked to different feedbacks. A positive feedback was identified in which vegetation attenuates hydrodynamic energy allowing sediment accumulation within the patch. A negative feedback was identified where large velocities caused flow divergence and erosion outside of the vegetation, and would therefore compromise its lateral expansion. High densities of rigid vegetation enhance this negative feedback. Lower density flexible vegetation, however, combined with less energetic hydrodynamic conditions facilitate the expansion of vegetation patches as they cause less flow divergence and therefore less erosion. The strong flow divergence observed in the rigid vegetation cases highlight their importance for buffering hydrodynamics but at the cost of increased erosion within the front end of patches and along their lateral edges., This study (H+DHI-10-HyWEdges) received funding from European Union, Hydralab+. The authors would like to thank DHI for the use of their total environmental stimulator flume and the support staff. M. Maza is sincerely grateful to the Spanish Ministry of Science and Innovation for the funding provided in the grant RTI2018-097014-B-I00 of Proyectos de I+D+i Retos Investigación 2018 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Contribución de congreso (ConferenceOutput)

Physical Model Tests on Spar Buoy for Offshore Floating Wind Energy Conversion

  • Tomasicchio, Giuseppe Roberto
  • Vicinanza, Diego
  • Belloli, Marco
  • Lugli, Claudio
  • Latham, John-Paul
  • Iglesias Rodriguez, Jose Gregorio
  • Jensen, Bjarne
  • Vire, Axelle
  • Monbaliu, Jaak
  • Taruffi, Federico
  • Pustina, Luca
  • Leone, Elisa
  • Russo, Sara
  • Francone, Antonio
  • Fontanella, Alessandro
  • Di Carlo, Simone
  • Muggiasca, Sara
  • Decorte, Griet
  • Rivera, Irene
  • Ferrante, Vincenzo
  • Battistella, Tommaso
  • Guanche García, Raúl
  • Martínez Díaz, Abel
  • Elsässer, Björn
  • Via-Estrem, Lluis
  • Xiang, Jiansheng
  • Andersen, Morten Thøtt
  • Kofoed, Jens Peter
  • Bech Kramer, Morten
  • Musci, Elena
  • Lusito, Letizia
ABSTRACT: The present paper describes the experiences gained from the design methodology and operation of a 3D physical modelexperiment aimed to investigate the dynamic behaviour of a spar buoy floating offshore wind turbine. The physical model consists in a Froude-scaled NREL 5MW reference wind turbine (RWT) supported on the OC3-Hywind floating platform. Experimental tests have been performed at Danish Hydraulic Institute (DHI) offshore wave basin within the European Union-Hydralab+ Initiative, in April 2019. The floating wind turbine model has been subjected to a combination of regular and irregular wave attacks and different wind loads. Measurements of displacements, rotations, accelerations, forces response of the floating model and at the mooring lines have been carried out. First, free decay tests have been analysed to obtain the natural frequency and the modal damping ratios of each degree of freedom governing the offshore. Then, the results concerning regular waves, with orthogonal incidence to the structure, are presented. The results show that most of longitudinal dynamic response occurs at the wave frequency and most of lateral dynamic response occurs at rigid-body frequencies., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 654110, HYDRALAB+.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Contribución de congreso (ConferenceOutput)

Hidrodinámica y evolución del fondo en ecosistemas vegetados intermareales

  • Maza Fernández, María Emilia
  • García-Maribona López-Sela, Julio|||0000-0003-1385-4403
  • Argemi, Marta
  • López Lara, Javier|||0000-0003-0968-1909
  • Gillis, Lucy G.
  • Balke, Thorstenb
  • Suzuki, Tomohiro
Este trabajo ha sido financiado por el proyecto HyWEdges (hydrodynamics at coastal wetland edges) dentro de Hydralab+, financiado por el programa EUHorizon2020 Research and Innovation Programme, Grant Agreement 654110.