Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Orchestration of Crosshaul slices from federated administrative domains

  • Contreras Murillo, Luis Miguel
  • Bernardos Cano, Carlos Jesús
  • Oliva Delgado, Antonio de la
  • Costa-Pérez, Xavier
  • Guerzoni, Riccardo
Proceeding of: 2016 European Conference on Networks and Communications (EuCNC), With the advent of 5G networks, more dynamicity and flexibility will be needed for the deployment of services with very distinct requirements. Crosshaul areas (those integrating fronthaul and backhaul) are especially critical because of the variability of the demand and the cost of the (own) network deployment, which in many cases is jeopardized by the huge level of investment needed. A common market place to trade the required networking and computing facilities (in the form of a slice) in a multi-domain federated environment is envisaged as the solution for easing the adaptation to future demands. This paper proposes to develop the concept of multi-domain Crosshaul by enabling the dynamic request of Crosshaul slices through a multi-provider exchange., This work has been supported by the European Community through the projects 5GEx (grant no. 671636) and 5GCrosshaul (grant no. 671598) within the H2020 programme.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

An overview of the CPRI specification and its application to C-RAN-based LTE scenarios

  • Oliva Delgado, Antonio de la
  • Hernández Gutiérrez, José Alberto
  • Larrabeiti López, David
  • Azcorra Saloña, Arturo
The CPRI specification has been introduced to enable the communication between radio equipment and radio equipment controllers, and is of particular interest for mobile operators willing to deploy their networks following the novel cloud radio access network approach. In such a case, CPRI provides an interface for the interconnection of remote radio heads with a baseband unit by means of the so-called fronthaul network. This article presents the CPRI specification, its concept, design, and interfaces, provides a use case for fronthaul dimensioning in a realistic LTE scenario, and proposes some interesting open research challenges in the next-generation 5G mobile network., The authors would like to acknowledge the support of projects CRAMnet (grant no. TEC2012-38362-C03-01) and EU H2020 5G-Crosshaul Project (grant no. 671598) to the development of this work., European Commission
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Distributed mobility management solutions for next mobile network architectures

  • Cominardi, Luca
  • Giust, Fabio
  • Bernardos Cano, Carlos Jesús
  • Oliva Delgado, Antonio de la
The architecture of current operator infrastructures is being challenged by the non-stopping growing demand of data hungry services appearing every day. While currently deployed operator networks have been able to cope with traffic demands so far, the architectures for the 5th generation of mobile networks (5G) are expected to support unprecedented traffic loads while decreasing costs associated to the network deployment and operations. Distributed Mobility Management (DMM) helps going into this direction, by flattening the network, hence improving its scalability, and enabling local access to the Internet and other communication services, like mobile-edge clouds. Initial proposals have been based on extending existing IP mobility protocols, such as Mobile IPv6 and Proxy Mobile IPv6, but these need to further evolve to comply with the requirements of future networks, which include, among others, higher flexibility. Software Defined Networking (SDN) appears as a powerful tool for operators looking forward to increased flexibility and reduced costs. In this article, we first propose a Proxy Mobile IPv6 based DMM solution which serves as a baseline for exploring the evolution of DMM towards SDN, including the identification of DMM design principles and challenges. Based on this investigation, we propose a SDN-based DMM solution which is evaluated against our baseline from analytic and experimental viewpoints., This work has been funded by the European Union’s Horizon 2020 programme under the grant agreement no. 671598 “5GCrosshaul: the 5G integrated fronthaul/backhaul”.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Delay analysis of mixed fronthaul and backhaul traffic under strict priority queueing discipline in a 5G packet transport network

  • Gowda, Apurva Shantharaj
  • Hernández Gutiérrez, José Alberto
  • Larrabeiti López, David
  • Kazovsky, Leonid
Virtualization of the base station for the purpose of centralization is being actively studied and researched as an implementation option for 5G mobile networks. Proposed as Cloud radio access network, the technology is expected to facilitate easier operation and maintenance than regular radio access networks. However, the base stations traffic has stringent delay requirements. In this paper, we explore the possibility of multiplexing fronthaul traffic and traditional backhaul traffic as it traverses over the metropolitan network while keeping the average fronthaul queueing delay and jitter under control. We analyze and simulate the cases of a single fronthaul flow and multiple fronthaul flows arriving at the packet switch assuming strict priority for the fronthaul queue. We propose a fronthaul frame aggregation strategy to improve the packet transmission efficiency while keeping the average fronthaul queueing delay and jitter constant regardless of the percentage of fronthaul traffic. While the criteria for aggregation is different for the 2 cases, we show that the optimal number of basic frames to aggregate is between 3-10 frames assuming the Common Public Radio Interface protocol., The authors would like to acknowledge the support of projects TIGRE5-CM (grant no. S2013/ICE-2919) and H2020 EU-funded 5G-Crosshaul Project (grant no. 671598) to the development of this work.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Optimization-in-the-Loop for Energy-Efficient 5G

  • Malandrino, Francesco
  • Casetti, Claudio
  • Chiasserini, Carla-Fabiana
  • Landi, Giovanni
We consider the problem of energy-efficient network management in 5G systems, where backhaul and fronthaul nodes have both networking and computational capabilities. We devise an optimization model accounting for the main features of 5G backhaul and fronthaul, and jointly solve the problems of (i) node switch on/off, (ii) VNF placement, and (iii) traffic routing. We implement an optimization module within an application on top of an SDN controller and NFV orchestrator, thus enabling swift, high-quality decisions based on current network conditions. Finally, we validate and test our scheme with real-world power consumption, network topology and traffic demand, assessing its performance as well as the relative importance of the main contributions to the total power consumption of the system., This work was supported by the EU project “5G-Crosshaul: The 5G Integrated fronthaul/backhaul” (grant no. 671598) within the H2020 programme.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Innovations through 5G-Crosshaul applications

  • Li, Xi
  • Jiménez, David
  • Contreras Murillo, Luis Miguel
  • Landi, Giada
  • Núñez-Martínez, José
  • Casellas, Ramon
  • González Díaz, Sergio
  • Chiasserini, Carla Fabiana
  • Rivas Sánchez, Jorge
  • Siracusa, Domenico
  • Goratti, Leonardo
Proceeding of: 2016 European Conference on Networks and Communications (EuCNC) 27-30 junio 2016 Athens, Greece, A transport network for 5G envisions integrating the fronthaul and backhaul segments (namely 5G-Crosshaul) into a single transport network. This requires a fully integrated and unified management of fronthaul and backhaul resources in a sharable, scalable and flexible way. The integrated and unified management of the transport network resources follows the Software Defined Networking (SDN) principles of centralization, decoupling between control and data plane and application ecosystem. Innovation to enable context-aware resource management and to provide system-wide optimization of QoS, as well as energy related objectives, lies on defining key applications as logical decision entities to program the underlying network and packet forwarding behaviour. This paper presents a set of 5G-Crosshaul SDN applications with the scope of (i) managing the 5G-Crosshaul resources, including not only network but also computing and storage resources, and (ii) offering efficient media distribution and traffic offloading solutions. In order to develop these applications in a real system, we identify the interactions between the applications and the control plane. Based on these interactions, we propose a two-layer application plane and specify the requirements of the applications on the Northbound Interface (NBI) of the control plane., This work has been supported by the H2020 project “5G-Crosshaul: The 5G Integrated fronthaul/backhaul” (671598).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Quasi-passive optical infrastructure for future 5G wireless networks: pros and cons

  • Gowda, Apurva Shantharaj
  • Kazovsky, Leonid
  • Wang, Ke
  • Larrabeiti López, David
In this paper, we study the applicability of the quasi-passive reconfigurable (QPAR) device, a special type of quasi-passive wavelength-selective switch with flexible power allocation properties and no power consumption in the steady state, to implement the concept of reconfigurable backhaul for 5G wireless networks. We first discuss the functionality of the QPAR node and its discrete component implementation, scalability, and performance. We present a novel multi-input QPAR structure and the pseudo-passive reconfigurable (PPAR) node, a device with the functionality of QPAR but that is pseudo-passive during steady-state operations. We then propose mesh and hierarchical back-haul network architectures for 5G based on the QPAR and PPAR nodes and discuss potential use cases. We compare the performance of a QPAR-based single-node architecture with state-of-the-art devices. We find that a QPAR node in a hierarchical network can reduce the average latency while extending the reach and quality of service of the network. However, due to the high insertion losses of the current QPAR design, some of these benefits are lost in practice. On the other hand, the PPAR node can realize the benefits practically and is the more energy-efficient solution for high reconfiguration frequencies, but the remote optical node will no longer be passive. In this paper, we discuss the potential benefits and issues with utilizing a QPAR in the optical infrastructure for 5G networks., This work has been funded by the Spanish project TIGRE5 CM (grant number S2013/ICE 2919), the EU H2020 5G Crosshaul project (grant number 671598), and the Australian Research Council’s Discovery Early Career Researcher Award (DECRA) funding scheme (project number DE150100924). The authors would also like to acknowledge the support of the Center for Integrated Systems, Stanford University, and Corning Incorporated. for the development of this work.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Sharing of crosshaul networks via a multi-domain exchange environment for 5G services

  • Contreras Murillo, Luis Miguel
  • Bernardos Cano, Carlos Jesús
  • Oliva Delgado, Antonio de la
  • Costa-Pérez, Xavier
Proceeding of: 2017 IEEE Conference on Network Softwarization (NetSoft), Next 5G networks will force service and network providers to support a huge variety of final services with very different requirements in terms of bandwidth, latency, etc. In parallel, vertical industries, as customers, will use 5G networks as technical enablers to support their businesses, demanding appropriate mechanisms for a flexible access and control of network and computing resource slices in the locations where such vertical have business. Since the footprint and the availability of resources to support the variety of services could be limited on the primary provider side, open environments enabling the trading of resources in the form of slices are required to facilitate the sharing of infrastructure with the necessary isolation and scalability. Here, this is exemplified by the proposal of adaptations between two prevalent architectures being defined in the EU H2020 projects 5G-Crosshaul and 5GExchange for allowing the trading of crosshaul resources enabling 5G services for Verticals., This work has been supported by the European Community through the projects 5GEx (grant no. 671636), 5G-Crosshaul (grant no. 671598), and 5G-Transformer (grant no. 761536), within the H2020 programme.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

WizHaul: On the Centralization Degree of Cloud RAN Next Generation Fronthaul

  • García Saavedra, Andrés
  • Salvat, Josep Xavier
  • Li, Xi
  • Costa-Pérez, Xavier
Cloud Radio Access Network (C-RAN) will become a main building block for 5G. However, the stringent requirements of current fronthaul solutions hinder its large-scale deployment. In order to introduce C-RAN widely in 5G, the next generation fronthaul \agsrev{interface} (NGFI) will be based on a cost-efficient packet-based network with higher path diversity. In addition, NGFI shall support a flexible functional split of the RAN to adapt the amount of centralization to the capabilities of the transport network. In this paper we question the ability of standard techniques to route NGFI traffic while maximizing the centralization degree---the goal of C-RAN. We propose two solutions jointly addressing both challenges: (i) a nearly-optimal backtracking scheme, and (ii) a low-complex greedy approach. We first validate the feasibility of our approach in an experimental proof-of-concept, and then evaluate both algorithms via simulations in large-scale (real and synthetic) topologies. Our results show that state-of-the-art techniques fail at maximizing the centralization degree and that the achievable C-RAN centralization highly depends on the underlying topology structure., This work has received funding from the European Unions Horizon 2020 research and innovation programme under grant agreement No 671598 (5G-Crosshaul project) and 761536 (5G-Transformer project).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Packet forwarding for heterogeneous technologies for integrated fronthaul/backhaul

  • Deiss, Thomas
  • Cominardi, Luca
  • García Saavedra, Andrés
  • Iovanna, Paola
  • Landi, Giada
  • Li, Xi
  • Mangues-Bafalluy, Josep
  • Núñez-Martínez, José
  • Oliva Delgado, Antonio de la
Proceeding of: 2016 European Conference on Networks and Communications (EuCNC), To meet the future mobile user demand at a reduced cost, operators are looking at solutions such as C-RAN and different functional splits to decrease the cost of deploying and maintaining cell sites. The use of these technologies forces operators to manage two physically separated networks, one for backhaul and one for fronthaul. To solve this issue, transport networks for 5G will carry both fronthaul and backhaul traffic operating over heterogeneous data plane technologies. Such an integrated fronthaul/backhaul (denoted as 5G-Crosshaul) transport network will be software-controlled to adapt to the fluctuating capacity demand of the new generation air interfaces. Based on a proposed data- and control-plane architecture for 5G-Crosshaul, we propose a frame format common to both fronthaul and backhaul traffic as well as a corresponding abstraction of the forwarding behavior of the network elements. The common frame format and the forwarding abstraction define the information to be exchanged at the southbound interface (SBI) of the 5G-Crosshaul Control Infrastructure (XCI). This paper derives requirements for the SBI from 5G use cases., The authors of this paper have been sponsored in part by the project H2020-ICT-2014-2 “5G-Crosshaul”: The 5G integrated fronthaul/backhaul” (671598)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Mobility management: deployment and adaptability aspects through mobile data traffic analysis

  • Sánchez Segura, María Isabel
  • Zeydan, Engin
  • Oliva Delgado, Antonio de la
  • Tan, A. Serdar
  • Yabas, Utku
  • Bernardos Cano, Carlos Jesús
The expected boost in mobile data traffic and the evolution towards the next generation of networks are making cellular operators reconsider whether current approaches for handling mobility could be improved, according to the characteristics of the mobile traffic that actually flows through real networks. In this work, we make use of extensive analysis of real network traces to infer the main characteristics of mobile data traffic for a particular operator. Our analysis focuses on the features related to mobility, i.e., location information, number of handovers, or duration of the data traffic exchange. New techniques to gather the mobility characteristics of the user based on data and control packets correlation are designed and applied to compare the gains of deploying different mobility management approaches., The research leading to these results has received funding from the EU Seventh Framework Programme (FP7/2007-2013) under grant agreement 318115 (Connectivity management for eneRgy Op- timised Wireless Dense networks, CROWD). The work of Antonio de la Oliva has also been funded by the EU H2020 5G-Crosshaul Project (grant no. 671598).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

5G-Crosshaul: an SDN/NFV control and data plane architecture for the 5G integrated Fronthaul/Backhaul

  • González Díaz, Sergio
  • Oliva Delgado, Antonio de la
  • Costa-Pérez, Xavier
  • Di Giglio, Andrea
  • Cavaliere, Fabio
  • Deiss, Thomas
  • Li, Xi
  • Mourad, Alain
This paper presents the control and data plane architecture design for a 5G transport solution (5G-Crosshaul) with the aim of integrating the fronthaul and backhaul network segments in a common transport stratum. The control plane relies on the Software-defined networking/Network Functions Virtualization concept to control and orchestrate the different elements of the network (the 5G-Crosshaul control infrastructure). The data plane is based on an mixed optical/packet-based forwarding entity (the 5G-Crosshaul forwarding element) that leverages the benefits of optical passthrough with the statistical multiplexing of packet-based transmission, working on top of a common frame format for both, fronthaul, and backhaul traffic (the 5G-Crosshaul common frame). In addition to the main architecture design, this work includes the impact of providing multi-tenancy support into the architecture of the overall system, in order to share the costs of building and operating the infrastructure among different operators. This architecture opens the 5G transport network as a service for innovative network applications on top (such as multi-tenancy, and resource management), provisioning the required network and IT resources in a flexible, cost-effective, and abstract manner. The proposed design supports the concept of network slicing pushed by the industry for realizing a truly flexible, sharable, and cost-effective future 5G system., This work has been funded by the EU H2020 project “5GCrosshaul: The 5G Integrated fronthaul/backhaul” (grant no. 671598).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

FluidRAN: Optimized vRAN/MEC Orchestration

  • Garcia-Saavedra, Andrés
  • Costa-Pérez, Xavier
  • Leith, Douglas J.
  • Iosifidis, George
Proceeding of: IEEE Conference on Computer Communications, INFOCOM 2018, Honolulu, Hawai, USA, 16-19 April 2018, Virtualized Radio Access Network (vRAN) architectures constitute a promising solution for the densification needs of 5G networks, as they decouple Base Stations (BUs) functions from Radio Units (RUs) allowing the processing power to be pooled at cost-efficient Central Units (CUs). vRAN facilitates the flexible function relocation (split selection), and therefore enables splits with less stringent network requirements compared to state-of-the-art fully Centralized (C-RAN) systems. In this paper, we study the important and challenging vRAN design problem. We propose a novel modeling approach and a rigorous analytical framework, FluidRAN, that minimizes RAN costs by jointly selecting the splits and the RUs-CUs routing paths. We also consider the increasingly relevant scenario where the RAN needs to support multi-access edge computing (MEC) services, that naturally favor distributed RAN (D-RAN) architectures. Our framework provides a joint vRAN/MEC solution that minimizes operational costs while satisfying the MEC needs. We follow a data-driven evaluation method, using topologies of 3 operational networks. Our results reveal that (i) pure C-RAN is rarely a feasible upgrade solution for existing infrastructure, (ii) FluidRAN achieves significant cost savings compared to D-RAN systems, and (iii) MEC can increase substantially the operator’s cost as it pushes vRAN function placement back to RUs., This work has received funding from the European Unions Horizon 2020 research and innovation programme under grant agreement No 671598 (5G-Crosshaul project) and 761536 (5G-Transformer project), and from Science Foundation Ireland (SFI) under Grant Number 17/CDA/4760
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

5G-crosshaul: an SDN/NFV integrated fronthaul/backhaul transport network architecture

  • Costa-Pérez, Xavier
  • García-Saavedra, Andrés
  • Li, Xi
  • Deiss, Thomas
  • Oliva Delgado, Antonio de la
  • Di Giglio, Andrea
  • Iovanna, Paola
  • Mourad, Alain
This article proposes an innovative architecture design for a 5G transport solution (dubbed 5G-Crosshaul) targeting the integration of existing and new fronthaul and backhaul technologies and interfaces. At the heart of the proposed design lie an SDN/NFV-based management and orchestration entity (XCI), and an Ethernet-based packet forwarding entity (XFE) supporting various fronthaul and backhaul traffic QoS profiles. The XCI lever-ages widespread architectural frameworks for NFV (ETSI NFV) and SDN (Open Daylight and ONOS). It opens the 5G transport network as a service for innovative network applications on top (e.g., multi-tenancy, resource management), provisioning the required network and IT resources in a flexible, cost-effective, and abstract manner. The proposed design supports the concept of network slicing pushed by the industry for realizing a truly flexible, sharable, and cost-effective future 5G system., This work has been funded by the EU H2020 project “5G- Crosshaul: The 5G Integrated Fronthaul/Backhaul” (Grant no. 671598).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Xhaul: toward an integrated fronthaul/backhaul architecture in 5G networks

  • Oliva Delgado, Antonio de la
  • Costa-Pérez, Xavier
  • Azcorra Saloña, Arturo
  • Di Giglio, Andrea
  • Cavaliere, Fabio
  • Tiegelbekkers, Dirk
  • Lessmann, Johannes
  • Haustein, Thomas
  • Mourad, Alain
  • Iovanna, Paola
The Xhaul architecture presented in this article is aimed at developing a 5G integrated backhaul and fronthaul transport network enabling flexible and software-defined reconfiguration of all networking elements in a multi-tenant and service-oriented unified management environment. The Xhaul transport network vision consists of high-capacity switches and heterogeneous transmission links (e.g., fiber or wireless optics, high-capacity copper, mmWave) interconnecting remote radio heads, 5G points of attachment (5GPoAs, e.g., macro-and small cells), centralized-processing units (mini data centers), and points of presence of the core networks of one or multiple service provider(s). This transport network shall flexibly interconnect distributed 5G radio access and core network functions, hosted on network centralized nodes, through the implementation of a control infrastructure using a unified, abstract network model for control plane integration (Xhaul Control Infrastructure, XCI); and a unified data plane encompassing innovative high-capacity transmission technologies and novel deterministic-latency switch architectures (Xhaul packet Forwarding Element, XFE). Standardization is expected to play a major role in a future 5G integrated front haul/backhaul architecture for multi-vendor interoperability reasons. To this end, we review the major relevant activities in the current standardization landscape and the potential impact on the Xhaul architecture., This work has been partly supported by the Madrid Regional Government through the TIGRE5-CM program (S2013/ICE-2919) and the EU H2020 Xhaul Project (grant no. 671598).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Software-defined wireless transport networks for flexible mobile backhaul in 5G systems

  • Bercovich, Dudu
  • Contreras Murillo, Luis Miguel
  • Haddad, Yoram
  • Adam, Ariel
  • Bernardos Cano, Carlos Jesús
Traditionally microwave backhaul has been configured and operated in a static manner by means of vendor specific management systems. This mode of operation will be difficult to adapt to the new challenges originated by 5G networks. New mechanisms for adaptation and flexibility are required also in this network segment. The usage of a signaled control plane solution (based on OpenFlow) will facilitate the operation and will provide means for automation of actions on the wireless transport network segment. In addition to that, a standard control plane helps to reach the multi-vendor approach reducing complexity and variety of current per-vendor operation. This paper presents the motivation for the introduction of programmability concepts in wireless transport networks and illustrate the applicability of such control plane with two relevant use cases for dynamically controlling wireless transport nodes in 5G networks. Extensions to OpenFlow protocol are also introduced for building Software Defined Wireless Transport Networks (SDWTNs)., This research was (partially) funded by the Office of the Chief Scientist of the Israel Ministry of Economy under the Neptune generic research project (the Israeli consortium for network programming). This work has been also (partially) funded by the EU H2020 Xhaul Project (grant no. 671598).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The CTTC 5G end-to-end experimental platform: integrating heterogeneous wireless/optical networks, distributed cloud, and IoT devices

  • Muñoz González, Raül
  • Mangues Bafalluy, Josep
  • Vilalta, Ricard
  • Verikoukis, Christos
  • Alonso Zárate, Jesús
  • Georgiadis, Apostolos
  • Payaró Llisterri, Miquel
  • Pérez Neira, Ana Isabel|||0000-0003-4281-3934
  • Casellas Regi, Ramón
  • Martínez Rivera, Ricardo Victor
  • Núñez Martínez, José
  • Requena Esteso, Manuel
  • Pubill, David
  • Font Bach, Oriol
  • Henarejos Hernández, Pol
  • Serra, Jordi
  • Vázquez Gallego, Francisco
The Internet of Things (IoT) will facilitate a wide variety of applications in different domains, such as smart cities, smart grids, industrial automation (Industry 4.0), smart driving, assistance of the elderly, and home automation. Billions of heterogeneous smart devices with different application requirements will be connected to the networks and will generate huge aggregated volumes of data that will be processed in distributed cloud infrastructures. On the other hand, there is also a general trend to deploy functions as software (SW) instances in cloud infrastructures [e.g., network function virtualization (NFV) or mobile edge computing (MEC)]. Thus, the next generation of mobile networks, the fifth-generation (5G), will need not only to develop new radio interfaces or waveforms to cope with the expected traffic growth but also to integrate heterogeneous networks from end to end (E2E) with distributed cloud resources to deliver E2E IoT and mobile services. This article presents the E2E 5G platform that is being developed by the Centre Tecnol?gic de Telecomunicacions de Catalunya (CTTC), the first known platform capable of reproducing such an ambitious scenario., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The CTTC 5G end-to-end experimental platform: integrating heterogeneous wireless/optical networks, distributed cloud, and IoT devices

  • Muñoz González, Raül
  • Mangues Bafalluy, Josep
  • Vilalta, Ricard
  • Verikoukis, Christos
  • Alonso Zárate, Jesús
  • Georgiadis, Apostolos
  • Payaró Llisterri, Miquel
  • Pérez Neira, Ana Isabel
  • Casellas Regi, Ramón
  • Martínez Rivera, Ricardo Victor
  • Núñez Martínez, José
  • Requena Esteso, Manuel
  • Pubill, David
  • Font Bach, Oriol
  • Henarejos Hernández, Pol
  • Serra, Jordi
  • Vázquez Gallego, Francisco
The Internet of Things (IoT) will facilitate a wide variety of applications in different domains, such as smart cities, smart grids, industrial automation (Industry 4.0), smart driving, assistance of the elderly, and home automation. Billions of heterogeneous smart devices with different application requirements will be connected to the networks and will generate huge aggregated volumes of data that will be processed in distributed cloud infrastructures. On the other hand, there is also a general trend to deploy functions as software (SW) instances in cloud infrastructures [e.g., network function virtualization (NFV) or mobile edge computing (MEC)]. Thus, the next generation of mobile networks, the fifth-generation (5G), will need not only to develop new radio interfaces or waveforms to cope with the expected traffic growth but also to integrate heterogeneous networks from end to end (E2E) with distributed cloud resources to deliver E2E IoT and mobile services. This article presents the E2E 5G platform that is being developed by the Centre Tecnol?gic de Telecomunicacions de Catalunya (CTTC), the first known platform capable of reproducing such an ambitious scenario., Peer Reviewed, Postprint (author's final draft)
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Quality Probe for Testing Multimedia Content in 5G Networks

  • López Velasco, Juan Pedro
  • Jiménez Bermejo, David|||0000-0002-7382-4276
  • Navarro, Carlos
  • Rodrigo Ferrán, Juan Antonio|||0000-0002-8873-0440
  • Menéndez García, José Manuel|||0000-0003-0584-2250
  • Sánchez Almodóvar, Nuria
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Blind quality algorithm to analyze streaming video contents in 5g networks

  • López Velasco, Juan Pedro
  • Authier, Anton
  • Jiménez Bermejo, David|||0000-0002-7382-4276
  • Menéndez García, José Manuel|||0000-0003-0584-2250
  • Sánchez Almodóvar, Nuria