Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Parameter estimation in models of biological oscillators: an automated regularised estimation approach

  • Pitt, Jake Alan
  • Banga, Julio R.
[Background] Dynamic modelling is a core element in the systems biology approach to understanding complex biosystems. Here, we consider the problem of parameter estimation in models of biological oscillators described by deterministic nonlinear differential equations. These problems can be extremely challenging due to several common pitfalls: (i) a lack of prior knowledge about parameters (i.e. massive search spaces), (ii) convergence to local optima (due to multimodality of the cost function), (iii) overfitting (fitting the noise instead of the signal) and (iv) a lack of identifiability. As a consequence, the use of standard estimation methods (such as gradient-based local ones) will often result in wrong solutions. Overfitting can be particularly problematic, since it produces very good calibrations, giving the impression of an excellent result. However, overfitted models exhibit poor predictive power. Here, we present a novel automated approach to overcome these pitfalls. Its workflow makes use of two sequential optimisation steps incorporating three key algorithms: (1) sampling strategies to systematically tighten the parameter bounds reducing the search space, (2) efficient global optimisation to avoid convergence to local solutions, (3) an advanced regularisation technique to fight overfitting. In addition, this workflow incorporates tests for structural and practical identifiability., [Results] We successfully evaluate this novel approach considering four difficult case studies regarding the calibration of well-known biological oscillators (Goodwin, FitzHugh–Nagumo, Repressilator and a metabolic oscillator). In contrast, we show how local gradient-based approaches, even if used in multi-start fashion, are unable to avoid the above-mentioned pitfalls., [Conclusions] Our approach results in more efficient estimations (thanks to the bounding strategy) which are able to escape convergence to local optima (thanks to the global optimisation approach). Further, the use of regularisation allows us to avoid overfitting, resulting in more generalisable calibrated models (i.e. models with greater predictive power)., This research has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 675585 (MSCA ITN “SyMBioSys”) and from the Spanish MINECO/FEDER project SYNBIOCONTROL (DPI2017-82896-C2-2-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimality and identification of dynamic models in systems biology: an inverse optimal control framework

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
8 pages, 5 figures.-- A correction has been published: Bioinformatics, Volume 34, Issue 21, 01 November 2018, Page 3780, https://doi.org/10.1093/bioinformatics/bty438, Motivation Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. Here we present an inverse optimal control framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data. After presenting a general statement of the inverse optimal control problem, and discussing special cases of interest, we outline numerical strategies which are scalable and robust. Results We discuss the existence, relevance and implications of identifiability issues in the above problems. We present a robust computational approach based on regularized cost functions and the use of suitable direct numerical methods based on the control-vector parameterization approach. To avoid convergence to local solutions, we make use of hybrid global-local methods. We illustrate the performance and capabilities of this approach with several challenging case studies, including simulated and real data. We pay particular attention to the computational scalability of our approach (with the objective of considering large numbers of inputs and states). We provide a software implementation of both the methods and the case studies. Availability and implementation The code used to obtain the results reported here is available at https://zenodo.org/record/1009541., This research was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement No 675585 (MSCA ITN ‘SyMBioSys’) and from the Spanish MINECO/FEDER projects SYNBIOFACTORY [grant number DPI2014-55276-C5-2-R], SYNBIOCONTROL [DPI2017-82896-C2-2-R] and IMPROWINE [grant number AGL2015-67504-C3-2-R]. N.T. is a MSCA ESR at IIM-CSIC (Spain), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Full observability and estimation of unknown inputs, states and parameters of nonlinear biological models

  • Villaverde, A. F.
  • Tsiantis, Nikolaos
  • Banga, Julio R.
12 pages, 4 figures.-- Published by the Royal Society under the terms of the Creative Commons Attribution License, In this paper, we address the system identification problem in the context of biological modelling. We present and demonstrate a methodology for (i) assessing the possibility of inferring the unknown quantities in a dynamic model and (ii) effectively estimating them from output data. We introduce the term Full Input-State-Parameter Observability (FISPO) analysis to refer to the simultaneous assessment of state, input and parameter observability (note that parameter observability is also known as identifiability). This type of analysis has often remained elusive in the presence of unmeasured inputs. The method proposed in this paper can be applied to a general class of nonlinear ordinary differential equations models. We apply this approach to three models from the recent literature. First, we determine whether it is theoretically possible to infer the states, parameters and inputs, taking only the model equations into account. When this analysis detects deficiencies, we reformulate the model to make it fully observable. Then we move to numerical scenarios and apply an optimization-based technique to estimate the states, parameters and inputs. The results demonstrate the feasibility of an integrated strategy for (i) analysing the theoretical possibility of determining the states, parameters and inputs to a system and (ii) solving the practical problem of actually estimating their values, This research was supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 675585 (MSCA ITN ‘SyMBioSys’). This research was also funded by the Spanish Ministry of Science, Innovation and Universities, project SYNBIOCONTROL (ref. DPI2017-82896-C2-2-R). N.T. is a MSCA ESR at IIM-CSIC (Spain), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A dual parameter identification approach for data-based predictive modelling of hybrid gene regulatory network-growth kinetics in Pseudomonas putida mt-2

  • Tsipa, Argyro
  • Pitt, Jake Alan
  • Banga, Julio R.
  • Mantalaris, Athanasios
12 pages, 3 tables, 7 figures, Data integration to model-based description of biological systems incorporating gene dynamics improves the performance of microbial systems. Bioprocess performance, typically predicted using empirical Monod-type models, is essential for a sustainable bioeconomy. To replace empirical models, we updated a hybrid gene regulatory networkgrowth kinetic model, predicting aromatic pollutants degradation and biomass growth in Pseudomonas putida mt-2. We modelled a complex biological system including extensive information to understand the role of the regulatory elements in toluene biodegradation and biomass growth. The updated model exhibited extra complications such as the existence of oscillations and discontinuities. As parameter estimation of complex biological models remains a key challenge, we used the updated model to present a dual parameter identification approach (the “dual approach”) combining two independent methodologies. Approach I handled the complexity by incorporation of demonstrated biological knowledge in the model-development process and combination of global sensitivity analysis and optimisation. Approach II complemented Approach I handling multimodality, illconditioning and overfitting through regularisation estimation, global optimisation and identifiability analysis. To systematically quantify the biological system, we used a vast amount of high-quality time-course data. The dual approach resulted in an accurately calibrated kinetic model (NRMSE:0.17055) efficiently handling the additional model complexity. We tested model validation using three independent experimental data sets, achieving greater predictive power (NRMSE:0.18776) than the individual approaches (NRMSE I:0.25322, II:0.25227) and increasing model robustness. These results demonstrated data-driven predictive modelling potentially leading to bioprocess’ model-based control and optimisation, This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement 675585 (Marie Skłodowska-Curie ITN “SymBioSys”). JRB also acknowledges funding from the Spanish Ministry of Science, Innovation and Universities and the European Union FEDER under project grant SYNBIOCONTROL (DPI2017-82896-C2-2-R). Author JAP has been a Marie Skłodowska- Curie ESR at IIM-CSIC (Spain)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

GEARS a toolbox for Global parameter Estimation with Automated Regularisation via Sampling

  • Pitt, Jake Alan
  • Banga, Julio R.
1 zip file, GEARS (Global parameter Estimation with Automated Regularisation via Sampling) is a Matlab toolbox for parameter estimation in nonlinear dynamic models composed of deterministic ordinary differential equations (ODEs). GEARS is based on the combination of three main strategies: (i) global optimisation (to avoid convergence to local solutions), (ii) reduction of the search space (i.e. tighter bounds on parameters), (iii) regularised estimation, a strategy used to handle overfitting (i.e. fitting the noise rather than the signal). As a result, GEARS can allow the user to avoid both underfitting and overfitting problems while requiring minimum supervision from the user. These capabilities are especially useful when calibrating ODE-based models with highly nonlinear and flexible dynamics (e.g. models of biological oscillators), SyMBioSys – Systematic Models for Biological Systems Engineering Training Network 675585, European Commission; Spanish MINECO/FEDER project SYNBIOCONTROL (DPI2017-82896-C2-2-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Full observability and estimation of unknown inputs, states and parameters of nonlinear biological models [Software]

  • Tsiantis, Nikolaos
  • Villaverde, A. F.
  • Banga, Julio R.
1 zip file, This is a supplementary code repository for the article: N. Tsiantis, A. F. Villaverde, and J. R. Banga. Full observability and estimation of unknown inputs, states and parameters of nonlinear biological models. Submitted, 2019. In this article, we investigate the simultaneous inference of states, time-invariant parameters and time-dependent inputs in biological modelling. In other words we consider both the theoretical observability problem (FISPO) and the practical full system reconstruction problem (optimal tracking). Here we provide the scripts to run the optimal tracking problem for the case studies presented in the aforementioned article, This research was supported by the European Union's Horizon 2020 research and innovation pro-gram under grant agreement No 675585 (MSCA ITN 'SyMBioSys'). This research was alsofunded by the Spanish Ministry of Science, Innovation and Universities, project SYNBIOCON-TROL (ref. DPI2017-82896-C2-2-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Inverse optimal control framework in systems biology: case studies (version 3)

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
Here we provide the scripts necessary to reproduce the case studies considered in Tsiantis, N., E. Balsa-Canto and J. R. Banga (2018) Optimality and identification of dynamic models in systems biology: an inverse optimal control framework. Bioinformatics 34(14):2433-2440 [1]. In order to run these scripts, users will need: - a Matlab R2015 (or later) installation, under Windows or Linux operating systems - the AMIGO2 toolbox with the IOC add-on, available at: https://sites.google.com/site/amigo2toolbox/home/amigo2_ioc Users need to make sure that the above AMIGO2 toolbox is fully functional before attempting to run the inverse optimal control case studies. Please refer to the AMIGO2 documentation. All the input files for the 4 case studies and their particular subcases are given with the same names as reported in the main paper and the supplementary information of [1]. Detailed instructions to run each case study are provided in readme.txt files., Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. In [1] we have presented an inverse optimal control (IOC) framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data., European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network (675585), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Inverse optimal control framework in systems biology: case studies (version 2)

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
Here we provide the scripts necessary to reproduce the case studies considered in [1]. In order to run these scripts, users will need: - a Matlab R2015 (or later) installation, under Windows or Linux operating systems - the AMIGO2 toolbox with the IOC add-on, available at: https://sites.google.com/site/amigo2toolbox/home/amigo2_ioc Users need to make sure that the above AMIGO2 toolbox is fully functional before attempting to run the inverse optimal control case studies. Please refer to the AMIGO2 documentation. All the input files for the 4 case studies and their particular subcases are given with the same names as reported in the main paper and the supplementary information of [1]. Detailed instructions to run each case study are provided in readme.txt files, Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. In Tsiantis, N., E. Balsa-Canto and J. R. Banga (2018) Optimality and identification of dynamic models in systems biology: an inverse optimal control framework. Bioinformatics, bty139 [1] we have presented an inverse optimal control (IOC) framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data, European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network (675585), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Inverse optimal control framework in systems biology: case studies (version 1)

  • Tsiantis, Nikolaos
  • Balsa-Canto, Eva
  • Banga, Julio R.
Here we provide the scripts necessary to reproduce the case studies considered in [1]. In order to run these scripts, users will need: - a Matlab R2017 (or later) installation, under Windows or Linux operating systems - the AMIGO2 toolbox with the IOC add-on, available at: https://sites.google.com/site/amigo2toolbox/home/amigo2_ioc Detailed instructions to run each case study are provided in readme.txt files., Optimality principles have been used to explain many biological processes and systems. However, the functions being optimized are in general unknown a priori. In Tsiantis, N., E. Balsa-Canto and J. R. Banga (2017) Optimality and identification of dynamic models in systems biology: an inverse optimal control framework. Submitted [1] we have presented an inverse optimal control (IOC) framework for modeling dynamics in systems biology. The objective is to identify the underlying optimality principle from observed time-series data and simultaneously estimate unmeasured time-dependent inputs and time-invariant model parameters. As a special case, we also consider the problem of optimal simultaneous estimation of inputs and parameters from noisy data, European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network (675585), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

GEARS: Original release

  • Pitt, Jake Alan
  • Banga, Julio R.
1 file, This is the original release of the GEARS toolbox, SyMBioSys – Systematic Models for Biological Systems Engineering Training Network 675585, European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

GEARS: v1.1

  • Pitt, Jake Alan
  • Banga, Julio R.
1 file, GEARS a toolbox for Global parameter Estimation with Automated Regularisation via Sampling by Jake Alan Pitt and Julio R. Banga, European Commission, SyMBioSys - Systematic Models for Biological Systems Engineering Training Network 675585, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Using optimal control to understand complex metabolic pathways [Software]

  • Tsiantis, Nikolaos
  • Banga, Julio R.
In order to run the scripts to reproduce the results shown in the paper, you will need a Matlab installation under Windows (Linux not tested, although it should run). Requirements: - Matlab version R2015b or later (tested with version R2015b using a 64-bit Windows 7 Professional operating system with Intel(R) Xeon(R) CPU E5-2630 @ 2.30GHz and 16GB RAM.) - Matlab toolboxes: Optimization Toolbox, Symbolic Toolbox - ICLOCS version 1.2.1 available at http://www.ee.ic.ac.uk/ICLOCS/ICLOCS_Old.htm and documented at http://www.ee.ic.ac.uk/ICLOCS/user_guide.pdf - ICLOCS also requires: SUNDIALS TB, CVODES (check ICLOCS documentation for their installation) - AMIGO2, available from https://sites.google.com/site/amigo2toolbox/home Installation: - install Matlab and the recommended toolboxes, and make sure they can be executed normally - install AMIGO2 and test it running the included examples - install ICLOCS and test it running the included examples, Software source code for the paper: Tsiantis, Nikolaos, Banga, Julio R. Using optimal control to understand complex metabolic pathways. BMC Bioinformatics 21, 472 (2020). https://doi.org/10.1186/s12859-020-03808-8, This research has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 675585 (MSCA ITN "SyMBioSys") and from the Spanish Ministry of Science, Innovation and Universities and the European Union FEDER under project grant SYNBIOCONTROL (DPI2017-82896-C2-2-R), Peer reviewed