Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 47
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proper Generalized Decomposition solutions within a Domain Decomposition strategy

  • Huerta, Antonio
  • Chinesta Soria, Francisco Jose
  • Nadal, Enrique|||0000-0002-2808-298X
[EN] Domain decomposition strategies and proper generalized decomposition are efficiently combined to obtain a fast evaluation of the solution approximation in parameterized elliptic problems with complex geometries. The classical difficulties associated to the combination of layered domains with arbitrarily oriented midsurfaces, which may require in-plane-out-of-plane techniques, are now dismissed. More generally, solutions on large domains can now be confronted within a domain decomposition approach. This is done with a reduced cost in the offline phase because the proper generalized decomposition gives an explicit description of the solution in each subdomain in terms of the solution at the interface. Thus, the evaluation of the approximation in each subdomain is a simple function evaluation given the interface values (and the other problem parameters). The interface solution can be characterized by any a priori user-defined approximation. Here, for illustration purposes, hierarchical polynomials are used. The repetitiveness of the subdomains is exploited to reduce drastically the offline computational effort. The online phase requires solving a nonlinear problem to determine all the interface solutions. However, this problem only has degrees of freedom on the interfaces and the Jacobian matrix is explicitly determined. Obviously, other parameters characterizing the solution (material constants, external loads, and geometry) can also be incorporated in the explicit description of the solution., European Commission, Grant/Award Number: MSCA ITN-ETN 675919; ESI group, Grant/Award Number: ENSAM ESI Chair; Spanish Ministry of Economy and Competitiveness, Grant/Award Number: DPI2017-85139-C2-2-R; Generalitat de Catalunya, Grant/Award Number: 2014SGR1471
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Separated response surfaces for flows in parametrised domains: comparison of a priori and a posteriori PGD algorithms

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Borchini, Luca
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced order models (ROM) are commonly employed to solve parametric problems and to devise inexpensive response surfaces to evaluate quantities of interest in real-time. There are many families of ROMs in the literature and choosing among them is not always a trivial task. This work presents a comparison of the performance of a priori and a posteriori proper generalised decomposition (PGD) algorithms for an incompressible Stokes flow problem in a geometrically parametrised domain. This problem is particularly challenging as the geometric parameters affect both the solution manifold and the computational spatial domain. The difficulty is further increased because multiple geometric parameters are considered and extended ranges of values are analysed for the parameters and this leads to significant variations in the flow features. Using a set of numerical experiments involving geometrically parametrised microswimmers, the two PGD algorithms are extensively compared in terms of their accuracy and their computational cost, expressed as a function of the number of full-order solves required., This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska-Curie Actions (Grant number: 675919) that financed the Ph.D. fellowship of L.B. and by the Spanish Ministry of Economy and Competitiveness (Grant number: DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant number: CEX2018-000797-S) and the Generalitat de Catalunya (Grant number: 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Nonintrusive proper generalised decomposition for parametrised incompressible flow problems in OpenFOAM

  • Tsiolakis, Vasileios
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Othmer, Carsten
  • Huerta, Antonio|||0000-0003-4198-3798
The computational cost of parametric studies currently represents the major limitation to the application of simulation-based engineering techniques in a daily industrial environment. This work presents the first nonintrusive implementation of the proper generalised decomposition (PGD) in OpenFOAM, for the approximation of parametrised laminar incompressible Navier–Stokes equations. The key feature of this approach is the seamless integration of a reduced order model (ROM) in the framework of an industrially validated computational fluid dynamics software. This is of special importance in an industrial environment because in the online phase of the PGD ROM the description of the flow for a specific set of parameters is obtained simply via interpolation of the generalised solution, without the need of any extra solution step. On the one hand, the spatial problems arising from the PGD separation of the unknowns are treated using the classical solution strategies of OpenFOAM, namely the semi-implicit method for pressure linked equations (SIMPLE) algorithm. On the other hand, the parametric iteration is solved via a collocation approach. The resulting ROM is applied to several benchmark tests of laminar incompressible Navier–Stokes flows, in two and three dimensions, with different parameters affecting the flow features. Eventually, the capability of the proposed strategy to treat industrial problems is verified by applying the methodology to a parametrised flow control in a realistic geometry of interest for the automotive industry., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A superconvergent HDG method for stokes flow with strongly enforced symmetry of the stress tensor

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Karkoulias, Alexandros
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
The final publication is available at Springer via http://dx.doi.org/10.1007/s10915-018-0855-y, This work proposes a superconvergent hybridizable discontinuous Galerkin (HDG) method for the approximation of the Cauchy formulation of the Stokes equation using same degree of polynomials for the primal and mixed variables. The novel formulation relies on the well-known Voigt notation to strongly enforce the symmetry of the stress tensor. The proposed strategy introduces several advantages with respect to the existing HDG formulations. First, it remedies the suboptimal behavior experienced by the classical HDG method for formulations involving the symmetric part of the gradient of the primal variable. The optimal convergence of the mixed variable is retrieved and an element-by-element postprocess procedure leads to a superconvergent velocity field, even for low-order approximations. Second, no additional enrichment of the discrete spaces is required and a gain in computational efficiency follows from reducing the quantity of stored information and the size of the local problems. Eventually, the novel formulation naturally imposes physical tractions on the Neumann boundary. Numerical validation of the optimality of the method and its superconvergent properties is performed in 2D and 3D using meshes of different element types., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A locking-free face-centred finite volume (FCFV) method for linear elastostatics

  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
A face-centred finite volume (FCFV) method is proposed for linear elastostatic problems. The FCFV is a mixed hybrid formulation, featuring a system of first-order equations, that defines the unknowns on the faces (edges in two dimensions) of the mesh cells. The symmetry of the stress tensor is strongly enforced using the well-known Voigt notation and the displacement and stress fields inside each cell are obtained by means of explicit formulas. The resulting FCFV method is robust and locking-free in the nearly incompressible limit. Numerical experiments in two and three dimensions show optimal convergence of the displacement and the stress fields without any reconstruction. Moreover, the accuracy of the FCFV method is not sensitive to mesh distortion and stretching. Classical benchmark tests including Kirch’s plate and Cook’s membrane problems in two dimensions as well as three dimensional problems involving shear phenomenons, pressurised thin shells and complex geometries are presented to show the capability and potential of the proposed methodology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Structural health monitoring by combining machine learning and dimensionality reduction techniques

  • Quaranta, Giacomo
  • Lopez, Elena
  • Abisset-Chavanne, Emmanuelle
  • Louis Duval, Jean
  • Huerta, Antonio|||0000-0003-4198-3798
  • Chinesta, Francisco
Structural Health Monitoring is of major interest in many areas of structural mechanics. This paper presents a new approach based on the combination of dimensionality reduction and data-mining techniques able to differentiate damaged and undamaged regions in a given structure. Indeed, existence, severity (size) and location of damage can be efficiently estimated from collected data at some locations from which the fields of interest are completed before the analysis based on machine learning and dimensionality reduction techniques proceed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybridisable discontinuous Galerkin solution of geometrically parametrised Stokes flows

  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Borchini, Luca
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper proposes a novel computational framework for the solution of geometrically parametrised flow problems governed by the Stokes equation. The proposed method uses a high-order hybridisable discontinuous Galerkin formulation and the proper generalised decomposition rationale to construct an off-line solution for a given set of geometric parameters. The generalised solution contains the information for all the geometric parameters in a user-defined range and it can be used to compute sensitivities. The proposed approach circumvents many of the weaknesses of other approaches based on the proper generalised decomposition for computing generalised solutions of geometrically parametrised problems. Four numerical examples show the optimal mesh convergence properties of the proposed method and demonstrate its applicability in two and three dimensions, with particular emphasis on parametrised flows in microfluidics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A second-order face-centred finite volume method for elliptic problems

  • Vieira, Luan M.
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A second-order face-centred finite volume method (FCFV) is proposed. Contrary to the more popular cell-centred and vertex-centred finite volume (FV) techniques, the proposed method defines the solution on the faces of the mesh (edges in two dimensions). The method is based on a mixed formulation and therefore considers the solution and its gradient as independent unknowns. They are computed solving an element-by-element problem after the solution at the faces is determined. The proposed approach avoids the need of reconstructing the solution gradient, as required by cell-centred and vertex-centred FV methods. This strategy leads to a method that is insensitive to mesh distortion and stretching. The current method is second-order and requires the solution of a global system of equations of identical size and identical number of non-zero elements when compared to the recently proposed first-order FCFV. The formulation is presented for Poisson and Stokes problems. Numerical examples are used to illustrate the approximation properties of the method as well as to demonstrate its potential in three dimensional problems with complex geometries. The integration of a mesh adaptive procedure in the FCFV solution algorithm is also presented., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Reshaping diagrams for bending straightening of forged aeronautical components

  • Mena Andrade, Ramiro
  • Aguado, José Vicente
  • Guinard, S.
  • Huerta, Antonio|||0000-0003-4198-3798
The final publication is available at Springer via http://dx.doi.org/10.1007/s00170-020-05856-z, Large and thick-walled aluminium forgings exhibit shape distortions induced by residual stresses. To restore the nominal geometry, a series of highly manual and time-consuming reshaping operations need to be carried out. In this paper, we are concerned with the development of efficient computer simulation tools to assist operators in bending straightening, which is one of the most common reshaping operations. Our approach is based on the computation of reshaping diagrams, a tool that allows selecting a nearly optimal bending load to be applied in order to minimize distortion. Most importantly, we show that the reshaping diagram needs not to account for the residual stress field, as its only effect is to shift of the reshaping diagram by some offset. That is, the overall behaviour including a realistic 3D residual stress field in a forged part can be retrieved by shifting the residual stress free reshaping diagram by the appropriate offset. Finally, we propose a strategy in order to identify the offset on-the-fly during the reshaping operation using simple force-displacement measures., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 675919., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners

  • Seoane Chouciño, Marcos
  • Ledger, Paul D.
  • Gil, Antonio
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Mallett, Mike
This is the peer reviewed version of the following article: Seoane, M. [et al.]. A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners. "International journal for numerical methods in engineering", 1 Gener 2020, vol. 121, núm. 16, p. 3529-3559. , which has been published in final form athttps://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6369. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The design of a new magnetic resonance imaging (MRI) scanner requires multiple numerical simulations of the same magneto-mechanical problem for varying model parameters, such as frequency and electric conductivity, in order to ensure that the vibrations, noise, and heat dissipation are minimized. The high computational cost required for these repeated simulations leads to a bottleneck in the design process due to an increased design time and, thus, a higher cost. To alleviate these issues, the application of reduced order modeling techniques, which are able to find a general solution to high-dimensional parametric problems in a very efficient manner, is considered. Building on the established proper orthogonal decomposition technique available in the literature, the main novelty of this work is an efficient implementation for the solution of 3D magneto-mechanical problems in the context of challenging MRI configurations. This methodology provides a general solution for varying parameters of interest. The accuracy and efficiency of the method are proven by applying it to challenging MRI configurations and comparing with the full-order solution., Generalitat de Catalunya, 2017‐SGR‐1278; Marie Sklodowska‐Curie Innovative Training Network AdMoRe, 675919; Spanish Ministry of Economy and Competitiveness, DPI2017‐85139‐C2‐2‐R, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Discontinuous Galerkin approximations in computational mechanics: hybridization, exact geometry and degree adaptivity

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
Discontinuous Galerkin (DG) discretizations with exact representation of the geometry and local polynomial degree adaptivity are revisited. Hybridization techniques are employed to reduce the computational cost of DG approximations and devise the hybridizable discontinuous Galerkin (HDG) method. Exact geometry described by non-uniform rational B-splines (NURBS) is integrated into HDG using the framework of the NURBS-enhanced finite element method (NEFEM). Moreover, optimal convergence and superconvergence properties of HDG-Voigt formulation in presence of symmetric second-order tensors are exploited to construct inexpensive error indicators and drive degree adaptive procedures. Applications involving the numerical simulation of problems in electrostatics, linear elasticity and incompressible viscous flows are presented. Moreover, this is done for both high-order HDG approximations and the lowest-order framework of face-centered finite volumes (FCFV)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Solution of geometrically parametrised problems within a CAD environment via model order reduction

  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The main objective of this work is to describe a general and original approach for computing an off-line solution for a set of parameters describing the geometry of the domain. That is, a solution able to include information for different geometrical parameter values and also allowing to compute readily the sensitivities. Instead of problem dependent approaches, a general framework is presented for standard engineering environments where the geometry is defined by means of NURBS. The parameters controlling the geometry are now the control points characterising the NURBS curves or surfaces. The approach proposed here, valid for 2D and 3D scenarios, allows a seamless integration with CAD preprocessors. The proper generalised decomposition (PGD), which is applied here to compute explicit geometrically parametrised solutions, circumvents the curse of dimensionality. Moreover, optimal convergence rates are shown for PGD approximations of incompressible flows., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A local multiple proper generalized decomposition based on the partition of unity

  • Ibáñez Pinillo, Rubén
  • Abisset Chavanne, Emmanuelle
  • Chinesta Soria, Francisco
  • Huerta, Antonio|||0000-0003-4198-3798
  • Cueto Prendes, Elias
This is the peer reviewed version of the following article: Ibáñez, R. [et al.]. A local multiple proper generalized decomposition based on the partition of unity. "International journal for numerical methods in engineering", 12 Octubre 2019, vol. 120, núm. 2, p. 139-152, which has been published in final form at DOI:10.1002/nme.6128. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., It is well known that model order reduction techniques that project the solution of the problem at hand onto alow-dimensional subspace present difficulties when this solution lies on a non-linear manifold. To overcomethese difficulties—notably, an undesirable augment in the number of requiredmodesin the solution—severalsolutions have been suggested. Among them we can cite the use of non-linear dimensionality reductiontechniques or, alternatively, the employ of local linear reduced order approaches. These last approachesusually present the difficulty of ensuring continuity between these local models. Here, a new method ispresented that ensures this continuity by resorting to the paradigm of the partition of unity, while employingProper Generalized Decompositions at each local patch., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A simple microstructural viscoelastic model for flowing foams

  • Ibáñez, Rubén
  • Scheuer, Adrien
  • Abisset-Chavanne, Emmanuelle
  • Chinesta, Francisco
  • Huerta, Antonio|||0000-0003-4198-3798
  • Keunings, Roland
This is a post-peer-review, pre-copyedit version of an article published in International journal of material forming. The final authenticated version is available online at: http://dx.doi.org/10.1007/s12289-018-1417-4, The numerical modelling of forming processes involving the flow of foams requires taking into account the different problem scales. Thus, in industrial applications a macroscopic approach is suitable, whereas the macroscopic flow parameters depend on the cellular structure: cell size, shape, orientation, etc. Moreover, the shape and orientation of the cells are induced by the flow. A fully microscopic description remains useful to understand the foam behaviour and the topological changes induced by the cell elongation or distortion, however, from an industrial point of view, microscopic simulations remain challenging to address practical applications involving flows in complex 3D geometries. In this paper, we propose a viscoelastic flow model where the foam microstructure is represented from suitable microstructure descriptors whose evolution is governed by the macroscopic flow kinematics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Multiscale proper generalized decomposition based on the partition of unity

  • Ibáñez Pinillo, Rubén
  • Ammar, Amine
  • Cueto Prendes, Elias
  • Huerta, Antonio|||0000-0003-4198-3798
  • Duval, Jean Louis
  • Chinesta, Francisco
This is the peer reviewed version of the following article: Ibáñez, R. [et al.]. Multiscale proper generalized decomposition based on the partition of unity. "International journal for numerical methods in engineering", 9 November 2019, vol. 120, núm. 6, p. 727-747, which has been published in final form at DOI: 10.1002/nme.6154. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Solutions of partial differential equations could exhibit a multiscale behavior. Standard discretization techniques are constraints to mesh up to the finest scale to predict accurately the response of the system. The proposed methodology is based on the standard proper generalized decomposition rationale; thus, the PDE is transformed into a nonlinear system that iterates between microscale and macroscale states, where the time coordinate could be viewed as a 2D time, representing the microtime and macrotime scales. The macroscale effects are taken into account because of an FEM-based macrodiscretization, whereas the microscale effects are handled with unidimensional parent spaces that are replicated throughout the domain. The proposed methodology can be seen as an alternative route to circumvent prohibitive meshes arising from the necessity of capturing fine-scale behaviors., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Proper generalized decomposition solutions within a domain decomposition strategy

  • Huerta, Antonio|||0000-0003-4198-3798
  • Nadal Soriano, Enrique
  • Chinesta, Francisco
This is the peer reviewed version of the following article: Huerta, A., Nadal, E., Chinesta, F. Proper generalized decomposition solutions within a domain decomposition strategy. "International journal for numerical methods in engineering", 30 Març 2018, vol. 113, núm. 13, p. 1972-1994, which has been published in final form at https://onlinelibrary.wiley.com/doi/full/10.1002/nme.5729. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Domain Decomposition strategies and the Proper Generalized Decomposition are efficiently combined to obtain a fast evaluation of the solution approximation in parameterized elliptic problems with complex geometries. The classical difficulties associated to the combination of layered domains with arbitrarily oriented mid-surfaces, which may require in-plane–out-of-plane techniques, are now dismissed. More generally, solutions on large domains can now be confronted within a Domain Decomposition approach. This is done with a reduced cost in the offline phase. Because, the Proper Generalized Decomposition gives an explicit description of the solution in each subdomain in terms of the solution at the interface. Thus, the evaluation of the approximation in each subdomain is a simple function evaluation given the interface values (and the other problem parameters). The interface solution can be characterized by any a priori user-defined approximation. Here, for illustration purposes, hierarchical polynomials are used. The repetitiveness of the subdomains is exploited to reduce drastically the offline computational effort. The online phase requires to solve a nonlinear problem to determine all the interface solutions. But this problem only has degrees of freedom on the interfaces and the Jacobian matrix is explicitly determined. Obviously, other parameters characterizing the solution (material constants, external loads, geometry) can also be incorporated in the explicit description of the solution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A regularised-adaptive Proper Generalised Decomposition implementation for coupled magneto-mechanical problems with application to MRI scanners

  • Barroso Gassiot, Guillem
  • Gil Ruiz, Antonio Javier
  • Ledger, Paul D.
  • Mallett, Mike
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Latest developments in high-strength Magnetic Resonance Imaging (MRI) scanners with in-built high resolution, have dramatically enhanced the ability of clinicians to diagnose tumours and rare illnesses. However, their high-strength transient magnetic fields induce unwanted eddy currents in shielding components, which result in fast vibrations, noise, imaging artefacts and, ultimately, heat dissipation, boiling off the helium used to super-cool the magnets. Optimum MRI scanner design requires the capturing of complex electro-magneto-mechanical interactions with high fidelity computational tools. During production cycles, this is known to be extremely expensive due to the large number of configurations that need to be tested. There is an urgent need for the development of new cost-effective methods whereby previously performed computations can be assimilated as training solutions of a surrogate digital twin model to allow for real-time simulations. In this paper, a Reduced Order Modelling technique based on the Proper Generalised Decomposition method is presented for the first time in the context of MRI scanning design, with two distinct novelties. First, the paper derives from scratch the offline higher dimensional parametrised solution process of the coupled electro-magneto-mechanical problem at hand and, second, a regularised adaptive methodology is proposed for the circumvention of numerical singularities associated with the ill-conditioning of the discrete system in the vicinity of resonant modes. A series of numerical examples are presented in order to illustrate, motivate and demonstrate the validity and flexibility of the considered approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Reshaping of large aeronautical structural parts: a simplified simulation approach

  • Mena Andrade, Ramiro
  • Aguado, José Vicente
  • Guinard, S.
  • Huerta, Antonio|||0000-0003-4198-3798
Large aeronautical structural parts present important distortions after machining. This problem is caused by the presence of residual stresses, which are developed during previous manufacturing steps (quenching). Before being put into service, the nominal geometry is restored by means of mechanical methods. This operation is called reshaping and exclusively depends on the skills of a well-trained and experienced operator. Moreover, this procedure is time consuming and nowadays, it is only based on a trial and error approach. Therefore, there is a need at industrial level to solve this problem with the support of numerical simulation tools. By using a simplification hypothesis, it was found that the springback phenomenon behaves linearly and it allows developing a strategy to implement reshaping at an industrial level. © 2018 Author(s)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A superconvergent hybridisable discontinuous Galerkin method for linear elasticity

  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Karkoulias, Alexandros
  • Huerta, Antonio|||0000-0003-4198-3798
This is the peer reviewed version of the following article: Sevilla, R., Giacomini, M., Karkoulias, A., Huerta, A. A superconvergent hybridisable discontinuous Galerkin method for linear elasticity. "International journal for numerical methods in engineering", 12 Octubre 2018, vol. 116, núm. 2, p. 91-116, which has been published in final form at https://doi.org/10.1002/nme.5916. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The first superconvergent hybridisable discontinuous Galerkin method for linear elastic problems capable of using the same degree of approximation for both the primal and mixed variables is presented. The key feature of the method is the strong imposition of the symmetry of the stress tensor by means of the well known and extensively used Voigt notation, circumventing the use of complex mathematical concepts to enforce the symmetry of the stress tensor either weakly or strongly. A novel procedure to construct element by element a superconvergent postprocessed displacement is proposed. Contrary to other hybridisable discontinuous Galerkin formulations, the methodology proposed here is able to produce a superconvergent displacement field for low-order approximations. The resulting method is robust and locking-free in the nearly incompressible limit. An extensive set of numerical examples is utilised to provide evidence of the optimality of the method and its superconvergent properties in two and three dimensions and for different element types., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Parametric solutions of turbulent incompressible flows in OpenFOAM via the proper generalised decomposition

  • Tsiolakis, Vasileios
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Othmer, Carsten
  • Huerta, Antonio|||0000-0003-4198-3798
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, An a priori reduced order method based on the proper generalised decomposition (PGD) is proposed to compute parametric solutions involving turbulent incompressible flows of interest in an industrial context, using OpenFOAM. The PGD framework is applied for the first time to the incompressible Navier-Stokes equations in the turbulent regime, to compute a generalised solution for velocity, pressure and turbulent viscosity, explicitly depending on the design parameters of the problem. In order to simulate flows of industrial interest, a minimally intrusive implementation based on OpenFOAM SIMPLE algorithm applied to the Reynolds-averaged Navier-Stokes equations with the Spalart-Allmaras turbulence model is devised. The resulting PGD strategy is applied to parametric flow control problems and achieves both qualitative and quantitative agreement with the full order OpenFOAM solution for convectiondominated fully-developed turbulent incompressible flows, with Reynolds number up to one million., This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska-Curie Actions (Grant agreement No. 675919) that financed the PhD fellowship of V.T.. M.G. acknowledges the support of the Serra H´unter Programme of the Generalitat de Catalunya. M.G., R.S. and A.H. were supported by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant agreement No. CEX2018- 000797-S) and the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid coupling of CG and HDG discretizations based on Nitsche’s method

  • Spina, Andrea la
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-019-01770-8, A strategy to couple continuous Galerkin (CG) and hybridizable discontinuous Galerkin (HDG) discretizations based only on the HDG hybrid variable is presented for linear thermal and elastic problems. The hybrid CG-HDG coupling exploits the definition of the numerical flux and the trace of the solution on the mesh faces to impose the transmission conditions between the CG and HDG subdomains. The con- tinuity of the solution is imposed in the CG problem via Nitsche’s method, whereas the equilibrium of the flux at the interface is naturally enforced as a Neumann con- dition in the HDG global problem. The proposed strategy does not affect the core structure of CG and HDG discretizations. In fact, the resulting formulation leads to a minimally-intrusive coupling, suitable to be integrated in existing CG and HDG libraries. Numerical experiments in two and three dimensions show optimal global convergence of the stress and superconvergence of the displacement field, locking-free approximation, as well as the potential to treat structural problems of engineering interest featuring multiple materials with compressible and nearly incompressible behaviors., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Structural health monitoring by combining machine learning and dimensionality reduction techniques

  • Quaranta, Giacomo
  • López Tomás, Elena
  • Abisset-Chavanne, Emmanuelle
  • Duval, Jean Louis
  • Huerta, Antonio|||0000-0003-4198-3798
  • Chinesta Soria, Francisco
Structural Health Monitoring is of major interest in many areas of structural mechanics. This paper presents a new approach based on the combination of dimensionality reduction and data-mining techniques able to differentiate damaged and undamaged regions in a given structure. Indeed, existence, severity (size) and location of damage can be efficiently estimated from collected data at some locations from which the fields of interest are completed before the analysis based on machine learning and dimensionality reduction techniques proceed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A multidimensional data-driven sparse identification technique: the sparse proper generalized decomposition

  • Ibáñez Pinillo, Rubén
  • Abisset Chavanne, Emmanuelle
  • Ammar, Amine
  • González Ibáñez, David
  • Cueto Prendes, Elias
  • Huerta, Antonio|||0000-0003-4198-3798
  • Duval, Jean Louis
  • Chinesta Soria, Francisco
Sparse model identification by means of data is especially cumbersome if the sought dynamics live in a high dimensional space. This usually involves the need for large amount of data, unfeasible in such a high dimensional settings. This well-known phenomenon, coined as the curse of dimensionality, is here overcome by means of the use of separate representations. We present a technique based on the same principles of the Proper Generalized Decomposition that enables the identification of complex laws in the low-data limit. We provide examples on the performance of the technique in up to ten dimensions., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Multidimensional Data-Driven Sparse Identification Technique: The Sparse Proper Generalized Decomposition

  • Ibanez, R.
  • Abisset-Chavanne, E.
  • Ammar, A.
  • Gonzalez, D.
  • Cueto, E.
  • Huerta, A.
  • Duval, J.L.
  • Chinesta, F.
Sparse model identification by means of data is especially cumbersome if the sought dynamics live in a high dimensional space. This usually involves the need for large amount of data, unfeasible in such a high dimensional settings. This well-known phenomenon, coined as the curse of dimensionality, is here overcome by means of the use of separate representations. We present a technique based on the same principles of the Proper Generalized Decomposition that enables the identification of complex laws in the low-data limit. We provide examples on the performance of the technique in up to ten dimensions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hybrid constitutive modeling: data-driven learning of corrections to plasticity models

  • Ibáñez, R.
  • Abisset-Chavanne, E.
  • González, D.
  • Duval, J.L.
  • Cueto, E.
  • Chinesta, F.
In recent times a growing interest has arose on the development of data-driven techniques to avoid the employ of phenomenological constitutive models. While it is true that, in general, data do not fit perfectly to existing models, and present deviations from the most popular ones, we believe that this does not justify (or, at least, not always) to abandon completely all the acquired knowledge on the constitutive characterization of materials. Instead, what we propose here is, by means of machine learning techniques, to develop correction to those popular models so as to minimize the errors in constitutive modeling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

From linear to nonlinear PGD-based parametric structural dynamics

  • Quaranta, G.
  • Argerich Martin, C.
  • Ibañez, R.
  • Duval, J.L.
  • Cueto, E.
  • Chinesta, F.
The present paper analyzes different integration schemes of solid dynamics in the frequency domain involving the so-called Proper Generalized Decomposition – PGD. The last framework assumes for the solution a parametric dependency with respect to frequency. This procedure allowed introducing other parametric dependences related to loading, geometry, and material properties. However, in these cases, affine decompositions are required for an efficient computation of separated representations. A possibility for circumventing such difficulty consists in combining modal and harmonic analysis for defining an hybrid integration scheme. Moreover, such a procedure, as proved in the present work, can be easily generalized to address nonlinear parametric dynamics, as well as to solve problems with non-symmetric stiffness matrices, always operating in the domain of low frequencies.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multiscale proper generalized decomposition based on the partition of unity

  • Ibáñez Pinillo, Rubén
  • Ammar, Amine
  • Cueto Prendes, Elias
  • Huerta, Antonio
  • Duval, Jean Louis
  • Chinesta, Francisco
This is the peer reviewed version of the following article: Ibáñez, R. [et al.]. Multiscale proper generalized decomposition based on the partition of unity. "International journal for numerical methods in engineering", 9 November 2019, vol. 120, núm. 6, p. 727-747, which has been published in final form at DOI: 10.1002/nme.6154. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Solutions of partial differential equations could exhibit a multiscale behavior. Standard discretization techniques are constraints to mesh up to the finest scale to predict accurately the response of the system. The proposed methodology is based on the standard proper generalized decomposition rationale; thus, the PDE is transformed into a nonlinear system that iterates between microscale and macroscale states, where the time coordinate could be viewed as a 2D time, representing the microtime and macrotime scales. The macroscale effects are taken into account because of an FEM-based macrodiscretization, whereas the microscale effects are handled with unidimensional parent spaces that are replicated throughout the domain. The proposed methodology can be seen as an alternative route to circumvent prohibitive meshes arising from the necessity of capturing fine-scale behaviors., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Structural health monitoring by combining machine learning and dimensionality reduction techniques

  • Quaranta, Giacomo
  • López Tomás, Elena
  • Abisset-Chavanne, Emmanuelle
  • Duval, Jean Louis
  • Huerta, Antonio
  • Chinesta Soria, Francisco
Structural Health Monitoring is of major interest in many areas of structural mechanics. This paper presents a new approach based on the combination of dimensionality reduction and data-mining techniques able to differentiate damaged and undamaged regions in a given structure. Indeed, existence, severity (size) and location of damage can be efficiently estimated from collected data at some locations from which the fields of interest are completed before the analysis based on machine learning and dimensionality reduction techniques proceed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A superconvergent HDG method for stokes flow with strongly enforced symmetry of the stress tensor

  • Giacomini, Matteo
  • Karkoulias, Alexandros
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
The final publication is available at Springer via http://dx.doi.org/10.1007/s10915-018-0855-y, This work proposes a superconvergent hybridizable discontinuous Galerkin (HDG) method for the approximation of the Cauchy formulation of the Stokes equation using same degree of polynomials for the primal and mixed variables. The novel formulation relies on the well-known Voigt notation to strongly enforce the symmetry of the stress tensor. The proposed strategy introduces several advantages with respect to the existing HDG formulations. First, it remedies the suboptimal behavior experienced by the classical HDG method for formulations involving the symmetric part of the gradient of the primal variable. The optimal convergence of the mixed variable is retrieved and an element-by-element postprocess procedure leads to a superconvergent velocity field, even for low-order approximations. Second, no additional enrichment of the discrete spaces is required and a gain in computational efficiency follows from reducing the quantity of stored information and the size of the local problems. Eventually, the novel formulation naturally imposes physical tractions on the Neumann boundary. Numerical validation of the optimality of the method and its superconvergent properties is performed in 2D and 3D using meshes of different element types., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A locking-free face-centred finite volume (FCFV) method for linear elastostatics

  • Sevilla Cárdenas, Rubén
  • Giacomini, Matteo
  • Huerta, Antonio
A face-centred finite volume (FCFV) method is proposed for linear elastostatic problems. The FCFV is a mixed hybrid formulation, featuring a system of first-order equations, that defines the unknowns on the faces (edges in two dimensions) of the mesh cells. The symmetry of the stress tensor is strongly enforced using the well-known Voigt notation and the displacement and stress fields inside each cell are obtained by means of explicit formulas. The resulting FCFV method is robust and locking-free in the nearly incompressible limit. Numerical experiments in two and three dimensions show optimal convergence of the displacement and the stress fields without any reconstruction. Moreover, the accuracy of the FCFV method is not sensitive to mesh distortion and stretching. Classical benchmark tests including Kirch’s plate and Cook’s membrane problems in two dimensions as well as three dimensional problems involving shear phenomenons, pressurised thin shells and complex geometries are presented to show the capability and potential of the proposed methodology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A local multiple proper generalized decomposition based on the partition of unity

  • Ibáñez Pinillo, Rubén
  • Abisset Chavanne, Emmanuelle
  • Chinesta Soria, Francisco
  • Huerta, Antonio
  • Cueto Prendes, Elias
This is the peer reviewed version of the following article: Ibáñez, R. [et al.]. A local multiple proper generalized decomposition based on the partition of unity. "International journal for numerical methods in engineering", 12 Octubre 2019, vol. 120, núm. 2, p. 139-152, which has been published in final form at DOI:10.1002/nme.6128. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., It is well known that model order reduction techniques that project the solution of the problem at hand onto alow-dimensional subspace present difficulties when this solution lies on a non-linear manifold. To overcomethese difficulties—notably, an undesirable augment in the number of requiredmodesin the solution—severalsolutions have been suggested. Among them we can cite the use of non-linear dimensionality reductiontechniques or, alternatively, the employ of local linear reduced order approaches. These last approachesusually present the difficulty of ensuring continuity between these local models. Here, a new method ispresented that ensures this continuity by resorting to the paradigm of the partition of unity, while employingProper Generalized Decompositions at each local patch., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Reshaping of large aeronautical structural parts: a simplified simulation approach

  • Mena Andrade, Ramiro
  • Aguado, José Vicente
  • Guinard, S.
  • Huerta, Antonio
Large aeronautical structural parts present important distortions after machining. This problem is caused by the presence of residual stresses, which are developed during previous manufacturing steps (quenching). Before being put into service, the nominal geometry is restored by means of mechanical methods. This operation is called reshaping and exclusively depends on the skills of a well-trained and experienced operator. Moreover, this procedure is time consuming and nowadays, it is only based on a trial and error approach. Therefore, there is a need at industrial level to solve this problem with the support of numerical simulation tools. By using a simplification hypothesis, it was found that the springback phenomenon behaves linearly and it allows developing a strategy to implement reshaping at an industrial level. © 2018 Author(s)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Separated response surfaces for flows in parametrised domains: comparison of a priori and a posteriori PGD algorithms

  • Giacomini, Matteo
  • Borchini, Luca
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced order models (ROM) are commonly employed to solve parametric problems and to devise inexpensive response surfaces to evaluate quantities of interest in real-time. There are many families of ROMs in the literature and choosing among them is not always a trivial task. This work presents a comparison of the performance of a priori and a posteriori proper generalised decomposition (PGD) algorithms for an incompressible Stokes flow problem in a geometrically parametrised domain. This problem is particularly challenging as the geometric parameters affect both the solution manifold and the computational spatial domain. The difficulty is further increased because multiple geometric parameters are considered and extended ranges of values are analysed for the parameters and this leads to significant variations in the flow features. Using a set of numerical experiments involving geometrically parametrised microswimmers, the two PGD algorithms are extensively compared in terms of their accuracy and their computational cost, expressed as a function of the number of full-order solves required., This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska-Curie Actions (Grant number: 675919) that financed the Ph.D. fellowship of L.B. and by the Spanish Ministry of Economy and Competitiveness (Grant number: DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant number: CEX2018-000797-S) and the Generalitat de Catalunya (Grant number: 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A regularised-adaptive Proper Generalised Decomposition implementation for coupled magneto-mechanical problems with application to MRI scanners

  • Barroso Gassiot, Guillem
  • Gil Ruiz, Antonio Javier
  • Ledger, Paul D.
  • Mallett, Mike
  • Huerta, Antonio
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Latest developments in high-strength Magnetic Resonance Imaging (MRI) scanners with in-built high resolution, have dramatically enhanced the ability of clinicians to diagnose tumours and rare illnesses. However, their high-strength transient magnetic fields induce unwanted eddy currents in shielding components, which result in fast vibrations, noise, imaging artefacts and, ultimately, heat dissipation, boiling off the helium used to super-cool the magnets. Optimum MRI scanner design requires the capturing of complex electro-magneto-mechanical interactions with high fidelity computational tools. During production cycles, this is known to be extremely expensive due to the large number of configurations that need to be tested. There is an urgent need for the development of new cost-effective methods whereby previously performed computations can be assimilated as training solutions of a surrogate digital twin model to allow for real-time simulations. In this paper, a Reduced Order Modelling technique based on the Proper Generalised Decomposition method is presented for the first time in the context of MRI scanning design, with two distinct novelties. First, the paper derives from scratch the offline higher dimensional parametrised solution process of the coupled electro-magneto-mechanical problem at hand and, second, a regularised adaptive methodology is proposed for the circumvention of numerical singularities associated with the ill-conditioning of the discrete system in the vicinity of resonant modes. A series of numerical examples are presented in order to illustrate, motivate and demonstrate the validity and flexibility of the considered approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Discontinuous Galerkin approximations in computational mechanics: hybridization, exact geometry and degree adaptivity

  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
Discontinuous Galerkin (DG) discretizations with exact representation of the geometry and local polynomial degree adaptivity are revisited. Hybridization techniques are employed to reduce the computational cost of DG approximations and devise the hybridizable discontinuous Galerkin (HDG) method. Exact geometry described by non-uniform rational B-splines (NURBS) is integrated into HDG using the framework of the NURBS-enhanced finite element method (NEFEM). Moreover, optimal convergence and superconvergence properties of HDG-Voigt formulation in presence of symmetric second-order tensors are exploited to construct inexpensive error indicators and drive degree adaptive procedures. Applications involving the numerical simulation of problems in electrostatics, linear elasticity and incompressible viscous flows are presented. Moreover, this is done for both high-order HDG approximations and the lowest-order framework of face-centered finite volumes (FCFV)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Reshaping diagrams for bending straightening of forged aeronautical components

  • Mena Andrade, Ramiro
  • Aguado, José Vicente
  • Guinard, S.
  • Huerta, Antonio
The final publication is available at Springer via http://dx.doi.org/10.1007/s00170-020-05856-z, Large and thick-walled aluminium forgings exhibit shape distortions induced by residual stresses. To restore the nominal geometry, a series of highly manual and time-consuming reshaping operations need to be carried out. In this paper, we are concerned with the development of efficient computer simulation tools to assist operators in bending straightening, which is one of the most common reshaping operations. Our approach is based on the computation of reshaping diagrams, a tool that allows selecting a nearly optimal bending load to be applied in order to minimize distortion. Most importantly, we show that the reshaping diagram needs not to account for the residual stress field, as its only effect is to shift of the reshaping diagram by some offset. That is, the overall behaviour including a realistic 3D residual stress field in a forged part can be retrieved by shifting the residual stress free reshaping diagram by the appropriate offset. Finally, we propose a strategy in order to identify the offset on-the-fly during the reshaping operation using simple force-displacement measures., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 675919., Peer Reviewed, Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Nonintrusive proper generalised decomposition for parametrised incompressible flow problems in OpenFOAM

  • Tsiolakis, Vasileios
  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
  • Othmer, Carsten
  • Huerta, Antonio
The computational cost of parametric studies currently represents the major limitation to the application of simulation-based engineering techniques in a daily industrial environment. This work presents the first nonintrusive implementation of the proper generalised decomposition (PGD) in OpenFOAM, for the approximation of parametrised laminar incompressible Navier–Stokes equations. The key feature of this approach is the seamless integration of a reduced order model (ROM) in the framework of an industrially validated computational fluid dynamics software. This is of special importance in an industrial environment because in the online phase of the PGD ROM the description of the flow for a specific set of parameters is obtained simply via interpolation of the generalised solution, without the need of any extra solution step. On the one hand, the spatial problems arising from the PGD separation of the unknowns are treated using the classical solution strategies of OpenFOAM, namely the semi-implicit method for pressure linked equations (SIMPLE) algorithm. On the other hand, the parametric iteration is solved via a collocation approach. The resulting ROM is applied to several benchmark tests of laminar incompressible Navier–Stokes flows, in two and three dimensions, with different parameters affecting the flow features. Eventually, the capability of the proposed strategy to treat industrial problems is verified by applying the methodology to a parametrised flow control in a realistic geometry of interest for the automotive industry., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Parametric solutions of turbulent incompressible flows in OpenFOAM via the proper generalised decomposition

  • Tsiolakis, Vasileios
  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
  • Othmer, Carsten
  • Huerta, Antonio
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, An a priori reduced order method based on the proper generalised decomposition (PGD) is proposed to compute parametric solutions involving turbulent incompressible flows of interest in an industrial context, using OpenFOAM. The PGD framework is applied for the first time to the incompressible Navier-Stokes equations in the turbulent regime, to compute a generalised solution for velocity, pressure and turbulent viscosity, explicitly depending on the design parameters of the problem. In order to simulate flows of industrial interest, a minimally intrusive implementation based on OpenFOAM SIMPLE algorithm applied to the Reynolds-averaged Navier-Stokes equations with the Spalart-Allmaras turbulence model is devised. The resulting PGD strategy is applied to parametric flow control problems and achieves both qualitative and quantitative agreement with the full order OpenFOAM solution for convectiondominated fully-developed turbulent incompressible flows, with Reynolds number up to one million., This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska-Curie Actions (Grant agreement No. 675919) that financed the PhD fellowship of V.T.. M.G. acknowledges the support of the Serra H´unter Programme of the Generalitat de Catalunya. M.G., R.S. and A.H. were supported by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant agreement No. CEX2018- 000797-S) and the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A multidimensional data-driven sparse identification technique: the sparse proper generalized decomposition

  • Ibáñez Pinillo, Rubén
  • Abisset Chavanne, Emmanuelle
  • Ammar, Amine
  • González Ibáñez, David
  • Cueto Prendes, Elias
  • Huerta, Antonio
  • Duval, Jean Louis
  • Chinesta Soria, Francisco
Sparse model identification by means of data is especially cumbersome if the sought dynamics live in a high dimensional space. This usually involves the need for large amount of data, unfeasible in such a high dimensional settings. This well-known phenomenon, coined as the curse of dimensionality, is here overcome by means of the use of separate representations. We present a technique based on the same principles of the Proper Generalized Decomposition that enables the identification of complex laws in the low-data limit. We provide examples on the performance of the technique in up to ten dimensions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Solution of geometrically parametrised problems within a CAD environment via model order reduction

  • Sevilla Cárdenas, Rubén
  • Zlotnik, Sergio
  • Huerta, Antonio
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The main objective of this work is to describe a general and original approach for computing an off-line solution for a set of parameters describing the geometry of the domain. That is, a solution able to include information for different geometrical parameter values and also allowing to compute readily the sensitivities. Instead of problem dependent approaches, a general framework is presented for standard engineering environments where the geometry is defined by means of NURBS. The parameters controlling the geometry are now the control points characterising the NURBS curves or surfaces. The approach proposed here, valid for 2D and 3D scenarios, allows a seamless integration with CAD preprocessors. The proper generalised decomposition (PGD), which is applied here to compute explicit geometrically parametrised solutions, circumvents the curse of dimensionality. Moreover, optimal convergence rates are shown for PGD approximations of incompressible flows., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A simple microstructural viscoelastic model for flowing foams

  • Ibáñez, Rubén
  • Scheuer, Adrien
  • Abisset-Chavanne, Emmanuelle
  • Chinesta, Francisco
  • Huerta, Antonio
  • Keunings, Roland
This is a post-peer-review, pre-copyedit version of an article published in International journal of material forming. The final authenticated version is available online at: http://dx.doi.org/10.1007/s12289-018-1417-4, The numerical modelling of forming processes involving the flow of foams requires taking into account the different problem scales. Thus, in industrial applications a macroscopic approach is suitable, whereas the macroscopic flow parameters depend on the cellular structure: cell size, shape, orientation, etc. Moreover, the shape and orientation of the cells are induced by the flow. A fully microscopic description remains useful to understand the foam behaviour and the topological changes induced by the cell elongation or distortion, however, from an industrial point of view, microscopic simulations remain challenging to address practical applications involving flows in complex 3D geometries. In this paper, we propose a viscoelastic flow model where the foam microstructure is represented from suitable microstructure descriptors whose evolution is governed by the macroscopic flow kinematics., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A second-order face-centred finite volume method for elliptic problems

  • Vieira, Luan M.
  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
© 2020 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A second-order face-centred finite volume method (FCFV) is proposed. Contrary to the more popular cell-centred and vertex-centred finite volume (FV) techniques, the proposed method defines the solution on the faces of the mesh (edges in two dimensions). The method is based on a mixed formulation and therefore considers the solution and its gradient as independent unknowns. They are computed solving an element-by-element problem after the solution at the faces is determined. The proposed approach avoids the need of reconstructing the solution gradient, as required by cell-centred and vertex-centred FV methods. This strategy leads to a method that is insensitive to mesh distortion and stretching. The current method is second-order and requires the solution of a global system of equations of identical size and identical number of non-zero elements when compared to the recently proposed first-order FCFV. The formulation is presented for Poisson and Stokes problems. Numerical examples are used to illustrate the approximation properties of the method as well as to demonstrate its potential in three dimensional problems with complex geometries. The integration of a mesh adaptive procedure in the FCFV solution algorithm is also presented., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybridisable discontinuous Galerkin solution of geometrically parametrised Stokes flows

  • Sevilla Cárdenas, Rubén
  • Borchini, Luca
  • Giacomini, Matteo
  • Huerta, Antonio
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper proposes a novel computational framework for the solution of geometrically parametrised flow problems governed by the Stokes equation. The proposed method uses a high-order hybridisable discontinuous Galerkin formulation and the proper generalised decomposition rationale to construct an off-line solution for a given set of geometric parameters. The generalised solution contains the information for all the geometric parameters in a user-defined range and it can be used to compute sensitivities. The proposed approach circumvents many of the weaknesses of other approaches based on the proper generalised decomposition for computing generalised solutions of geometrically parametrised problems. Four numerical examples show the optimal mesh convergence properties of the proposed method and demonstrate its applicability in two and three dimensions, with particular emphasis on parametrised flows in microfluidics., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Proper generalized decomposition solutions within a domain decomposition strategy

  • Huerta, Antonio
  • Nadal Soriano, Enrique
  • Chinesta, Francisco
This is the peer reviewed version of the following article: Huerta, A., Nadal, E., Chinesta, F. Proper generalized decomposition solutions within a domain decomposition strategy. "International journal for numerical methods in engineering", 30 Març 2018, vol. 113, núm. 13, p. 1972-1994, which has been published in final form at https://onlinelibrary.wiley.com/doi/full/10.1002/nme.5729. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Domain Decomposition strategies and the Proper Generalized Decomposition are efficiently combined to obtain a fast evaluation of the solution approximation in parameterized elliptic problems with complex geometries. The classical difficulties associated to the combination of layered domains with arbitrarily oriented mid-surfaces, which may require in-plane–out-of-plane techniques, are now dismissed. More generally, solutions on large domains can now be confronted within a Domain Decomposition approach. This is done with a reduced cost in the offline phase. Because, the Proper Generalized Decomposition gives an explicit description of the solution in each subdomain in terms of the solution at the interface. Thus, the evaluation of the approximation in each subdomain is a simple function evaluation given the interface values (and the other problem parameters). The interface solution can be characterized by any a priori user-defined approximation. Here, for illustration purposes, hierarchical polynomials are used. The repetitiveness of the subdomains is exploited to reduce drastically the offline computational effort. The online phase requires to solve a nonlinear problem to determine all the interface solutions. But this problem only has degrees of freedom on the interfaces and the Jacobian matrix is explicitly determined. Obviously, other parameters characterizing the solution (material constants, external loads, geometry) can also be incorporated in the explicit description of the solution., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid coupling of CG and HDG discretizations based on Nitsche’s method

  • Spina, Andrea la
  • Giacomini, Matteo
  • Huerta, Antonio
This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-019-01770-8, A strategy to couple continuous Galerkin (CG) and hybridizable discontinuous Galerkin (HDG) discretizations based only on the HDG hybrid variable is presented for linear thermal and elastic problems. The hybrid CG-HDG coupling exploits the definition of the numerical flux and the trace of the solution on the mesh faces to impose the transmission conditions between the CG and HDG subdomains. The con- tinuity of the solution is imposed in the CG problem via Nitsche’s method, whereas the equilibrium of the flux at the interface is naturally enforced as a Neumann con- dition in the HDG global problem. The proposed strategy does not affect the core structure of CG and HDG discretizations. In fact, the resulting formulation leads to a minimally-intrusive coupling, suitable to be integrated in existing CG and HDG libraries. Numerical experiments in two and three dimensions show optimal global convergence of the stress and superconvergence of the displacement field, locking-free approximation, as well as the potential to treat structural problems of engineering interest featuring multiple materials with compressible and nearly incompressible behaviors., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners

  • Seoane Chouciño, Marcos
  • Ledger, Paul D.
  • Gil, Antonio
  • Zlotnik, Sergio
  • Mallett, Mike
This is the peer reviewed version of the following article: Seoane, M. [et al.]. A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners. "International journal for numerical methods in engineering", 1 Gener 2020, vol. 121, núm. 16, p. 3529-3559. , which has been published in final form athttps://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6369. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The design of a new magnetic resonance imaging (MRI) scanner requires multiple numerical simulations of the same magneto-mechanical problem for varying model parameters, such as frequency and electric conductivity, in order to ensure that the vibrations, noise, and heat dissipation are minimized. The high computational cost required for these repeated simulations leads to a bottleneck in the design process due to an increased design time and, thus, a higher cost. To alleviate these issues, the application of reduced order modeling techniques, which are able to find a general solution to high-dimensional parametric problems in a very efficient manner, is considered. Building on the established proper orthogonal decomposition technique available in the literature, the main novelty of this work is an efficient implementation for the solution of 3D magneto-mechanical problems in the context of challenging MRI configurations. This methodology provides a general solution for varying parameters of interest. The accuracy and efficiency of the method are proven by applying it to challenging MRI configurations and comparing with the full-order solution., Generalitat de Catalunya, 2017‐SGR‐1278; Marie Sklodowska‐Curie Innovative Training Network AdMoRe, 675919; Spanish Ministry of Economy and Competitiveness, DPI2017‐85139‐C2‐2‐R, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A superconvergent hybridisable discontinuous Galerkin method for linear elasticity

  • Sevilla Cárdenas, Rubén
  • Giacomini, Matteo
  • Karkoulias, Alexandros
  • Huerta, Antonio
This is the peer reviewed version of the following article: Sevilla, R., Giacomini, M., Karkoulias, A., Huerta, A. A superconvergent hybridisable discontinuous Galerkin method for linear elasticity. "International journal for numerical methods in engineering", 12 Octubre 2018, vol. 116, núm. 2, p. 91-116, which has been published in final form at https://doi.org/10.1002/nme.5916. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The first superconvergent hybridisable discontinuous Galerkin method for linear elastic problems capable of using the same degree of approximation for both the primal and mixed variables is presented. The key feature of the method is the strong imposition of the symmetry of the stress tensor by means of the well known and extensively used Voigt notation, circumventing the use of complex mathematical concepts to enforce the symmetry of the stress tensor either weakly or strongly. A novel procedure to construct element by element a superconvergent postprocessed displacement is proposed. Contrary to other hybridisable discontinuous Galerkin formulations, the methodology proposed here is able to produce a superconvergent displacement field for low-order approximations. The resulting method is robust and locking-free in the nearly incompressible limit. An extensive set of numerical examples is utilised to provide evidence of the optimality of the method and its superconvergent properties in two and three dimensions and for different element types., Peer Reviewed, Postprint (author's final draft)