Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

RAISELIFE project extends the lifetime of functional CSP materials

  • Sutter, Florian
  • Binyamin, Yaniv
  • Zoschke, T.
  • Fernández García, Aránzazu
  • Naamane, S.
  • Galetz, M.
  • Reoyo Prats, R.
  • Pérez Trujillo, Francisco Javier
  • Aglüro, Alina
  • Orioli, F.
  • Piron, Javier
  • Mandler, D.
  • Attout, A.
  • Caron, Simon
  • Wette, J.
  • Sánchez, Ricardo
  • Morales, Angel
  • Hildebrandt, C.
The RAISELIFE project was conducted from April 2016 until March 2020 and was funded within the H2020 program of the European Commission (Grant 686008). The project aimed at developing novel materials with extended lifetime and performance for parabolic-trough and solar tower CSP plants and thereby reducing electricity generation costs. In order to assess the expected durability of the novel materials, improved accelerated aging and qualification methods simulating in-service conditions in different climates were developed. The project brought together a broad consortium formed of industry partners, SMEs and research institutes of the CSP and material science sector. This paper summarizes the main developments and takeaways from the RAISELIFE project., The RAISELIFE project was conducted from April 2016 until March 2020 and was funded within the H2020 program of the European Commission (Grant 686008). The project aimed at developing novel materials with extended lifetime and performance for parabolic-trough and solar tower CSP plants and thereby reducing electricity generation costs. In order to assess the expected durability of the novel materials, improved accelerated aging and qualification methods simulating in-service conditions in different climates were developed. The project brought together a broad consortium formed of industry partners, SMEs and research institutes of the CSP and material science sector. This paper summarizes the main developments and takeaways from the RAISELIFE project., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Laboratory intercomparison of solar absorptance and thermal emittance measurements at room temperature

  • Caron, Simon
  • Herding, L.
  • Binyamin, Yaniv
  • Baidossi, M.
  • Vinetsky, Y.
  • Morales, Angel
  • Hildebrandt, C.
  • Reoyo Prats, R.
  • Faugeroux, O.
  • Sutter, Florian
  • Röger, M.
  • Manzano Agugliaro, F.
  • Agüero, Alina
  • Sergio, Rodríguez Catela
Solar thermal absorber coatings play an important role in the opto-thermal efficiency of receivers in Concentrated Solar Power (CSP). Two standard figures of merit are the solar absorptance αsol and thermal emittance εth, derived from spectral directional hemispherical reflectance measurements at room temperature. These two figures of merit allow comparing coating formulations in terms of performance and durability. In this study, a black coating and a solar selective coating are optically characterized by different laboratories to compare spectral datasets, solar absorptance αsol and thermal emittance εth calculations. The comparison includes various benchtop spectrophotometers operating in the UV-VIS-NIR and Infrared spectral ranges as well as three commercial portable reflectometers/emissometers. A good agreement is found between the nine parties participating in this intercomparison campaign. The black coating αsol value is 96.6 ± 0.2%, while the solar selective coating αsol value is 94.5 ± 0.4%. For the thermal emittance, spectral data is concatenated and integrated from 0.3 to 16 μm. The black coating εth value calculated at 650 °C is 80.8 ± 3.8%, while the solar selective coating εth value calculated at 650 °C is 25.0 ± 0.5%., Financial support from the European Union is gratefully acknowledged (EU-Raiselife project, Horizon 2020, Contract n° 686008). The author thanks the OPAC laboratory technical staff: Lucia Martinez, Carmen Amador and Tomas Reche for their technical assistance in optical measurements. This project (EU SFERA-III) has received funding from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement n◦ 823802, Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

10,000 h molten salt corrosion testing on IN617, uncoated and aluminide ferritic steels at 580 ºC

  • Agüero, Alina
  • Audigié, Pauline
  • Sergio, Rodríguez Catela
Long term testing of two ferritic-martensitic steels (P91 and VM12-SHC) with and without slurry deposited aluminide coatings containing 20 wt.% of Al at the surface was carried out by exposing these materials to the Solar Salt, a eutectic mixture composed of 60 % NaNO3 - 40 % KNO3 at 580ºC. This salt is currently used in operating thermal solar power plants as heat transfer and storage fluid. Tubes made of expensive Ni based alloys are employed to mitigate corrosion. The tested uncoated ferritic materials exhibited very high corrosion rates developing thick, easily detached scales. IN617 was also tested as a reference and experienced very low corrosion up to 5,000 h, but after 10,000 h a 50 ȝm thick, mostly NiO scale had developed with Na0.6CoO2 crystals deposited on top. There was also evidence of significant Cr depletion at the alloy surface. Carcinogenic CrVI was found in the Solar Salt melt in which the three uncoated alloys were immersed. In contrast, the two coated ferritic steels did not show evidence of degradation after 10,000 h and the most significant microstructural change was the development of a very thin protective NaAlO2 layer on their surface. An industrial process to deposit these coatings on the inner surfaces of pipes has already been developed., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 686008 (RAISELIFE project). We acknowledge its support and we also thank BrightSource Industries Israel for providing the Solar Salt as well all the members of the Metallic Materials Area at INTA for technical support.
Docta Complutense
Publication Artículo científico (JournalArticle)

Electrochemical impedance spectroscopy (EIS): An efficient technique for monitoring corrosion processes in molten salt environments in CSP applications

  • Encinas-Sánchez, Victor
  • De Miguel Gamo, María Teresa
  • Lasanta Carrasco, María Isabel
  • García Martín, Gustavo
  • Pérez Trujillo, Francisco Javier
This study assessed the behaviour of a constructive material in CSP plants, namely ferritic-martensitic steel, with molten NaNO3/KNO3 (60/40wt%), also known as Solar Salt. To this end, EIS is presented as a suitable technique to evaluate and monitor the resistance of this material to Solar Salt at 580°C. Tests were performed up to 1000h and results were also supported by gravimetric and microstructural characterisation of the samples and chemical analysis of the salt. According to the EIS results, a diffusion-controlled reaction occurred during contact, which indicates that the corrosion process follows a porous layer mechanism. The results also indicated variations in corrosion layer thickness and instability of the salt during the whole test. The EIS results were also used for determining the corrosion rate, this being estimated at ~300µmyear−1. Results obtained by EIS were in line with the behaviour of P91 steel as measured by gravimetric, morphological and chemical analysis. Thus, the results confirm the suitability of EIS for monitoring corrosion processes in real-time of constructive materials in CSP plants.