Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Increasing LPWAN scalability by means of concurrent multiband IoT technologies: an industry 4.0 use case

  • Adame, Toni
  • Bel, Albert
  • Bellalta, Boris
One of the most important challenges of the Internet of Things (IoT) in the next years will be the smooth incorporation of millions of smart devices into its communications paradigm. The greater coverage area of sub-1-GHz low-power wide area networks (LPWANs) makes them a suitable technology to easily encompass hundreds of end devices under a single base station. However, LPWAN inherent simplicity affects negatively on scalability, as these networks are not flexible enough to deal with a high number of nodes unless their traffic load is really low, which limits many potential use-cases. This paper analyzes the scalability issue in LPWAN and proposes the INTER-HARE protocol: a solution based on the use of concurrent multiband IoT technologies, where an 868-MHz LPWAN acts as transparent backhaul for a set of subnetworks working at 2.4 GHz. The implementation of the INTER-HARE protocol on a real IoT platform was assessed both in several laboratory testbeds and in a pilot developed in the premises of an industrial company, proving its suitability in non-delay sensitive monitoring applications with end devices scattered throughout the targeted area., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502) and the Open Call of INTER-IoT, Research and Innovation action - Horizon 2020 European Project, Grant Agreement #687283, financed by the European Union. It also received funding from the Catalan government through projects SGR-2017-1188 and SGR-2017-1739, and from the Spanish government under the project TEC2016-79510-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fall detection system for elderly people using IoT and ensemble machine learning algorithm

  • Yacchirema, Diana
  • Suárez de Puga, Jara
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
  • Esteve Domingo, Manuel
[EN] Falls represent a major public health risk worldwide for the elderly people. A fall not assisted in time can cause functional impairment in an elderly and a significant decrease in his mobility, independence, and life quality. In this sense, we propose IoTE-Fall system, an intelligent system for detecting falls of elderly people in indoor environments that takes advantages of the Internet of Thing and the ensemble machine learning algorithm. IoTE-Fall system employs a 3D-axis accelerometer embedded into a 6LowPAN wearable device capable of capturing in real time the data of the movements of elderly volunteers. To provide high efficiency in fall detection, in this paper, four machine learning algorithms (classifiers): decision trees, ensemble, logistic regression, and Deepnets are evaluated in terms of AUC ROC, training time and testing time. The acceleration readings are processed and analyzed at the edge of the network using an ensemble-based predictor model that is identified as the most suitable predictor for fall detection. The experiment results from collection data, interoperability services, data processing, data analysis, alert emergency service, and cloud services show that our system achieves accuracy, precision, sensitivity, and specificity above 94%., Research presented in this article has been partially funded by Horizon 2020 European Project grant INTER-IoT no. 687283, ACTIVAGE project under grant agreement no. 732679, the Escuela Politecnica Nacional, Ecuador, and Secretaria de Educacion Superior Ciencia, Tecnologia e Innovacion (SENESCYT), Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Especificación y desarrollo de una pasarela física y virtual para interoperabilidad de dispositivos heterogéneos en el ámbito de Internet de las Cosas

  • Olivares Gorriti, Eneko
[ES] En los últimos años, Internet de las cosas (``Internet of Things'' o ``IoT'') ha evolucionado de ser simplemente un concepto académico, construido alrededor de protocolos de comunicación y dispositivos, a ser un ecosistema con aplicaciones industriales y de negocio con implicaciones tecnológicas y sociales sin precedentes. Gracias a las nuevas redes de acceso inalámbricas emergentes, sensores mejorados y sistemas embebidos con procesadores cada vez más eficientes y baratos, una gran cantidad de objetos (tanto de nuestra vida cotidiana como de sistemas y procesos industriales) están interconectados entre sí, trasladando la información del mundo físico a las aplicaciones y servicios de Internet. A través de las pasarelas IoT los dispositivos que interactúan con el mundo físico son capaces de conectarse a las redes de comunicación e intercambiar información. Son varios los retos que deben afrontar las pasarelas en su papel dentro del Internet de las Cosas, entre ellas, la escalabilidad, seguridad, la gestión de dispositivos y, recientemente, la interoperabilidad. La falta de interoperabilidad entre los dispositivos provoca importantes problemas tecnológicos y empresariales, tales como la imposibilidad de conectar dispositivos IoT no interoperables a plataformas IoT heterogéneas, la imposibilidad de desarrollar aplicaciones IoT que exploten múltiples plataformas en dominios homogéneos y/o cruzados, la lentitud en la introducción de la tecnología IoT a gran escala, el desánimo en la adopción de la tecnología IoT, el aumento de los costes, la escasa reutilización de las soluciones técnicas y la insatisfacción de los usuarios. El propósito de esta tesis doctoral es la búsqueda de una solución óptima para la interoperabilidad entre dispositivos de Internet de las Cosas mediante la definición de una pasarela IoT genérica, modular y extensible; sin dejar de lado aspectos esenciales como la seguridad, escalabilidad y la calidad de servicio. Se completa esta tesis doctoral con una implementación software de la pasarela IoT siguiendo la definición propuesta, así como el despliegue y la evaluación de los resultados obtenidos en numerosos casos de uso pertenecientes a pilotos del proyecto de investigación Europeo ``INTER-IoT'' financiado a través del programa marco Horizonte 2020., [CA] En els últims anys, Internet de les coses (``Internet of Things'' o ``IoT'') ha evolucionat de ser simplement un concepte acadèmic, construït al voltant de protocols de comunicació i dispositius, a ser un ecosistema amb aplicacions industrials i de negoci amb implicacions tecnològiques i socials sense precedents. Gràcies a les noves xarxes d'accés ``wireless'' emergents, sensors millorats i sistemes embeguts amb processadors cada vegada més eficients i barats, una gran quantitat d'objectes (tant de la nostra vida quotidiana com de sistemes i processos industrials) estan interconnectats entre si, traslladant la informació del món físic a les aplicacions i serveis d'Internet. A través de les passarel·les IoT els dispositius que interactuen amb el món físic són capaços de connectar-se a les xarxes de comunicació i intercanviar informació. Són diversos els reptes que han d'afrontar les passarel·les en el seu paper dins de la Internet de les Coses, entre elles, l'escalabilitat, seguretat, la gestió de dispositius i, recentment, la interoperabilitat. La falta d'interoperabilitat entre els dispositius provoca importants problemes tecnològics i empresarials, com ara la impossibilitat de connectar dispositius IoT no interoperables a plataformes IoT heterogènies, la impossibilitat de desenvolupar aplicacions IoT que exploten múltiples plataformes en dominis homogenis i/o croats, la lentitud en la introducció de la tecnologia IoT a gran escala, el descoratjament en l'adopció de la tecnologia IoT, l'augment dels costos, l'escassa reutilització de les solucions tècniques i la insatisfacció dels usuaris. El propòsit d'aquesta tesi doctoral és la cerca d'una solució òptima per a la interoperabilitat entre dispositius d'Internet de les Coses mitjançant la definició d'una passarel·la IoT genèrica, modular i extensible; sense deixar de costat aspectes essencials com la seguretat, escalabilitat i la qualitat de servei. Es completa aquesta tesi doctoral amb una implementació programari de la passarel·la IoT seguint la definició proposada, així com el desplegament i l'avaluació dels resultats obtinguts en nombrosos casos d'ús pertanyents a pilots del projecte d'investigació Europeu ``INTER-IoT'' finançat a través del programa marc Horitzó 2020., [EN] In recent years, the Internet of Things (``IoT") has evolved from being simply an academic concept, built around communication protocols and devices, to an ecosystem with industrial and business applications with unprecedented technological and social implications. Thanks to new emerging wireless access networks, improved sensors and embedded systems with increasingly efficient and inexpensive processors, a large number of objects (both in our daily lives and in industrial systems and processes) are interconnected with each other, moving information from the physical world to Internet applications and services. Through IoT gateways, devices that interact with the physical world are able to connect to communication networks and exchange information. There are several challenges that gateways must face in their role within the Internet of Things, including scalability, security, device management and, recently, interoperability. The lack of interoperability between devices causes major technological and business problems, such as the impossibility of connecting non-interoperable IoT devices to heterogeneous IoT platforms, the impossibility of developing IoT applications that exploit multiple platforms in homogeneous and/or cross-domains, the slow introduction of IoT technology on a large scale, discouragement in the adoption of IoT technology, increased costs, low utilization of technical solutions and user dissatisfaction. The purpose of this doctoral thesis is the search for an optimal solution for interoperability between Internet of Things devices by defining a generic, modular and extensible IoT gateway; without neglecting essential aspects such as security, scalability and quality of service. This doctoral Thesis is completed with a software implementation of the IoT gateway following the proposed definition, as well as the deployment and evaluation of the results obtained in numerous use cases belonging to the pilots of the European research project ``INTER-IoT'' funded through the Horizon 2020 framework program., Esta tesis doctoral se completa con una implementación software de la pasarela IoT siguiendo la definición propuesta, así como el despliegue y la evaluación de los resultados obtenidos en numerosos casos de uso pertenecientes a pilotos del proyecto de investigación Europeo “INTER-IoT” financiado a través del programa marco Horizonte 2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Smart System for Sleep Monitoring by Integrating IoT With Big Data Analytics

  • Yacchirema-Vargas, Diana Cecilia
  • Sarabia-Jácome, David Fernando
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
  • Esteve Domingo, Manuel
[EN] Obtrusive sleep apnea (OSA) is one of the most important sleep disorders because it has a direct adverse impact on the quality of life. Intellectual deterioration, decreased psychomotor performance, behavior, and personality disorders are some of the consequences of OSA. Therefore, a real-time monitoring of this disorder is a critical need in healthcare solutions. There are several systems for OSA detection. Nevertheless, despite their promising results, these systems not guiding their treatment. For these reasons, this research presents an innovative system for both to detect and support of treatment of OSA of elderly people by monitoring multiple factors such as sleep environment, sleep status, physical activities, and physiological parameters as well as the use of open data available in smart cities. Our system architecture performs two types of processing. On the one hand, a pre-processing based on rules that enables the sending of real-time notifications to responsible for the care of elderly, in the event of an emergency situation. This pre-processing is essentially based on a fog computing approach implemented in a smart device operating at the edge of the network that additionally offers advanced interoperability services: technical, syntactic, and semantic. On the other hand, a batch data processing that enables a descriptive analysis that statistically details the behavior of the data and a predictive analysis for the development of services, such as predicting the least polluted place to perform outdoor activities. This processing uses big data tools on cloud computing. The performed experiments show a 93.3% of effectivity in the air quality index prediction to guide the OSA treatment. The system's performance has been evaluated in terms of latency. The achieved results clearly demonstrate that the pre-processing of data at the edge of the network improves the efficiency of the system., This work was supported in part by the European Union's Horizon 2020 Research and Innovation Programme through the Interoperability of Heterogeneous IoT Platforms Project (INTER-IoT) under Grant 687283, in part by the Escuela Politecnica Nacional, Ecuador, and in part by the Secretaria Nacional de Educacion Superior, Ciencia, Tecnologia e Innovacion (SENESCYT), Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

System for monitoring and supporting the treatment of sleep apnea using IoT and big data

  • Yacchirema-Vargas, Diana Cecilia
  • Sarabia-Jácome, David Fernando
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
  • Esteve Domingo, Manuel
[EN] Sleep apnea has become in the sleep disorder that causes greater concern in recent years due to its morbidity and mortality, higher medical care costs and poor people quality of life. Some proposals have addressed sleep apnea disease in elderly people, but they have still some technical limitations. For these reasons, this paper presents an innovative system based on fog and cloud computing technologies which in combination with IoT and big data platforms offers new opportunities to build novel and innovative services for supporting the sleep apnea and to overcome the current limitations. Particularly, the system is built on several low-power wireless networks with heterogeneous smart devices (i.e, sensors and actuators). In the fog, an edge node (Smart IoT Gateway) provides IoT connection and interoperability and pre-processing IoT data to detect events in real-time that might endanger the elderly's health and to act accordingly. In the cloud, a Generic Enabler Context Broker manages, stores and injects data into the big data analyzer for further processing and analyzing. The system's performance and subjective applicability are evaluated using over 30 GB size datasets and a questionnaire fulfilled by medicals specialist, respectively. Results show that the system data analytics improve the health professionals' decision making to monitor and guide sleep apnea treatment, as well as improving elderly people's quality of life. (C) 2018 Elsevier B.V. All rights reserved., This research was supported by the Ecuadorian Government through the Secretary of Higher Education, Science, Technology, and Innovation (SENESCYT) and has received funding from the European Union's "Horizon 2020'' research and innovation program as part of the ACTIVAGE project under Grant 732679 and the Interoperability of Heterogeneous IoT Platforms project (INTER-IoT) under Grant 687283.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

AAL open source system for the monitoring and intelligent control of nursing homes

  • González-Usach, Régel|||0000-0002-9869-2361
  • Esteve Domingo, Manuel
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
  • Collado, V.
[EN] SAFE-ECH is an innovative intelligent AAL open source system for monitoring nursing homes, that creates an Ambient Intelligent environment in a residence by collecting and storing sensor monitoring data, performing intelligent data analysis and specific actions to enhance the safety, comfort and efficient care of aged people. Our system implements open standards of the Open Geospatial Consortium complying with Observations & Measurements Schema (O&M), SensorML and Sensor Web Enablement (SWE) specifications. Our system adapts to the specific needs of each nursing home, integrating the required sensors, actuators, rules and services. It is scalable and allows the management of several residences simultaneously., This research was partially funded by the European Union's Horizon 2020 research and innovation programme as part of the INTERIoT project under Grant Agreement 687283, and by SAFE-ECH funded by the Spanish Ministerio de Industria, Economía y Competitividad (MINECO) under Grant Agreement RTC-2015-4502-1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A multimodal Fingerprint-based Indoor Positioning System for airports

  • Molina Moreno, Benjamin|||0000-0002-1995-4192
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
  • Esteve Domingo, Manuel
  • Olivares-Gorriti, Eneko
[EN] Indoor Localization techniques are becoming popular in order to provide a seamless indoor positioning system enhancing the traditional GPS service that is only suitable for outdoor environments. Though there are proprietary and costly approaches targeting high accuracy positioning, Wi-Fi and BLE networks are widely deployed in many public and private buildings (e.g. shopping malls, airports, universities, etc.). These networks are accessible through mobile phones resulting in an effective commercial off-the-self basic infrastructure for an indoor service. The obtained positioning accuracy is still being improved and there is on-going research on algorithms adapted for Wi-Fi and BLE and also for the particularities of indoor environments. This paper focuses not only on indoor positioning techniques, but also on a multimodal approach. Traditional proposals employ only one network technology whereas this paper integrates two different technologies in order to provide improved accuracy. It also sets the basis for combining (merging) additional technologies, if available. The initial results show that the positioning service performs better with a multimodal approach compared to individual (monomodal) approaches and even compared with Google¿s geolocation service in public spaces such as airports., This work was supported in part by the European Commission through the Door to Door Information for Airports and Airlines Project under Grant GA 635885 and in part by the European Commission through the Interoperability of Heterogeneous IoT Platforms Project under Grant 687283.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smart IoT Gateway For Heterogeneous Devices Interoperability

  • Yacchirema-Vargas, Diana Cecilia
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
The Internet of things (IoT) will interconnect a huge amount of devices, leading to a new way of interaction in the physical and virtual world, inspired by the idea of ubiquity, where all the objects around us, such as: sensors, automobiles, refrigerators, thermostats, industrial robots, tablets, smartphones, etc. could be connected anytime and anywhere. However, one of the main challenges that faces IoT is the high degree of heterogeneity in terms of communication capabilities of the devices, protocols, technologies or hardware. We focus on the implementation of a new Smart IoT Gateway designed to allow interconnection and interoperability between heterogeneous devices in the IoT. The proposed gateway offers significant advantages: (i) it enables connectivity of different protocols and traditional communication technologies (Ethernet) and wireless (ZigBee, Bluetooth, Wi-Fi); (ii) it uses a flexible protocol that translates all the data obtained from the different sensors into a uniform format, performing the analysis of the data obtained from the environment-based-rules related to the different types of sensors; (iii) it uses a lightweight and optimal protocol on the use of devices with limited resources for delivering information environment; and (iv) it provides local data storage for later use and analysis. Our proof of concept demonstrates the performance and capacity of the proposed Smart IoT Gateway is related with Active and Healthy Aging (AHA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Especificación e implementación de un sistema de red definida por software con funciones virtuales adaptadas a despliegues de Internet de las cosas

  • Suárez de Puga García, Jara
[ES] La complejidad en la gestión de las redes de comunicación tradicionales, así como su poca escalabilidad y flexibilidad, supone un obstáculo para el desarrollo y consolidación de nuevas tecnologías emergentes como es el caso del Internet de las Cosas (Internet of Things), dónde la facilidad para el intercambio y manejo de grandes volúmenes de datos heterogéneos procedentes de sensores es un requisito clave para el correcto funcionamiento del sistema. El Internet de las Cosas se define cómo la interconexión digital de objetos cotidianos dotados de inteligencia (Smart devices) a través de redes de comunicación de datos ya sean públicas (Internet) o privadas. Sin embargo, el Internet de las Cosas no sólo está compuesto por estos dispositivos, toda la infraestructura, plataformas, aplicaciones y servicios que ayudan a los datos a viajar desde los dispositivos origen y hacia sus diferentes destinos, y la gestión de estos también forman parte del denominado Internet de las Cosas. El almacenamiento, análisis, procesado y gestión masiva de dichos datos es lo que se denomina Big Data, y está compuesto de grandes cantidades de datos (massive data) estructurados en diferentes formatos, modelos de datos y protocolos, lo que dificulta su tratamiento y su intercambio a través de las redes de datos convencionales. Ante esta problemática la implementación de redes virtuales definidas por software se presenta como una posible solución para dotar de flexibilidad, escalabilidad y sencillez de gestión a las redes que interconectan estos dispositivos, plataformas y otros elementos IoT, permitiendo una visión global, una gestión centralizada y un desarrollo de servicios a nivel de red específicos para los entornos de Internet de las Cosas. Este proyecto se presenta como una aproximación de estas dos tecnologías y tendrá como objetivo el diseño de una solución donde probar las herramientas de control de redes definidas por software o programables (SDN) y las funciones virtuales de redes (NFV) aplicadas a despliegues de Internet de las Cosas (IoT) de forma que se puedan demostrar sus ventajas e implicaciones y se puedan descubrir nuevas líneas de desarrollo sobre esta base., [CA] La complexitat en la gestió de les xarxes de comunicació tradicionals, així com la seua poca escalabilitat i flexibilitat, suposa un obstacle per al desenvolupament i consolidació de noves tecnologies emergents com és el cas de la Internet de les Coses (Internet of Things), on la facilitat per a l'intercanvi i maneig de grans volums de dades heterogènies procedents de sensors és un requisit clau per al correcte funcionament del sistema. La Internet de les Coses es defineix com la interconnexió digital d'objectes quotidians dotats d'intel·ligència (Smart devices) a través de xarxes de comunicació de dades ja siguen públiques (Internet) o privades. No obstant això, la Internet de les Coses no sols està compost per aquests dispositius, tota la infraestructura, plataformes, aplicacions i serveis que ajuden les dades a viatjar des dels dispositius d'origen i cap a les seues diferents destinacions, i la gestió d'aquests també formen part de la denominada Internet de les Coses. L'emmagatzematge, anàlisi, processament i gestió massiva d'aquestes dades és el que es denomina Big Data, i està compost de grans quantitats de dades (massive data) estructurats en diferents formats, models de dades i protocols, la qual cosa dificulta el seu tractament i el seu intercanvi a través de les xarxes de dades convencionals. Davant aquesta problemàtica la implementació de xarxes virtuals definides per software es presenta com una possible solució per a dotar de flexibilitat, escalabilitat i senzillesa de gestió a les xarxes que interconnecten aquests dispositius, plataformes i altres elements IoT, permetent una visió global, una gestió centralitzada i un desenvolupament de serveis a nivell de xarxa específics per als entorns d'Internet de les Coses. Aquest projecte es presenta com una aproximació d'aquestes dues tecnologies i tindrà com a objectiu el disseny d'una solució on provar les eines de control de xarxes definides per software o programables (SDN) i les funcions virtuals de xarxes (NFV) aplicades a desplegaments d'Internet de les Coses (IoT) de manera que es puguen demostrar els seus avantatges i implicacions, i es puguen descobrir noves línies de desenvolupament sobre aquesta base., [EN] Nowadays, the complexity of traditional network administration, together with the lack of scalability and flexibility, has been a challenge for the proper development and integration of new emerging technologies which make use of this network. As an example, we have the so-called Internet of Things (IoT). The principal IoT network requirement that enables the growth of this paradigm is the need to facilitate high data volume exchange and administration, from very heterogeneous sources. The IoT concept is defined as the digital interconnection of daily objects endowed with more "intelligence" (Smart devices) through a data communication network either public (Internet) or private. However, this technological trend does not only depend on the "smart devices", but on the whole infrastructure, platforms, frameworks, services, and applications that helps data to travel from the source devices to their different destinations. Also, the handling of the massive volumes of data extracted from those smart devices, their storage, processing, and analysis, known as Big Data, is a key part of this paradigm. This data is gathered from very different sources, and hence, it has diverse data structures and formats. Moreover, it is exchanged using various network protocols (LoRa, CoAp, etc.) which hinder its management and communication through conventional networks, that were not created for such data traffic. Given this problem, several technological approaches have emerged to solve it. Virtual software-defined networking is presented as a possible solution to provide flexibility, scalability, and simplicity of management to the networks that interconnect these devices, platforms, services, and other IoT elements. The virtualization of the network infrastructure, includes an extra layer of abstraction, thus providing a holistic vision of the network and centralizing the administration of its elements and the development of specific network services for IoT deployments. This project is presented as an approximation of these two technological paradigms and will have as the main objective the design of an architectural blueprint and testbed were testing the control tools of software-defined networks (SDN) and the virtualized network functions (NFV) applied to IoT deployments. Thereby, its advantages and implications can be evaluated, and new lines of development can be discovered on this base.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Hybrid Delay-Based Congestion Control for Multipath TCP

  • González-Usach, Régel|||0000-0002-9869-2361
  • Esteve Domingo, Manuel
  • Palau Salvador, Carlos Enrique|||0000-0002-3795-5404
  • Pradilla-Cerón, Juan Vicente
[EN] Current algorithms for MPTCP (as LIA, OLIA, BALIA, or wVegas) present loss-based congestion control on the exception of wVegas. Delay-based congestion control allows a preventive action against congestion, capable to avoid loss up to some extent, unlike loss-based congestion control. Additionally delay-based congestion control induces lower delay and presents higher fairness, but poor performance interoperating with loss-based flows, as get a poor share of the available bandwidth. We propose DAIMD, a hybrid congestion control for Multipath TCP, based on the delay-based AIMD scheme, which benefits from better, preventive detection of congestion, a more responsive use of queues and consequently low induced delay, as well as the capability to coexist in fair conditions with loss-based flows in shared links. Our system presents its own analysis criteria for detecting incipient congestion that differs from other delay-based schemes on which it is based, such as CDG, delay-based AIMD and Vegas., This research has received funding from the European Union's Horizon 2020 research and innovation programme as part of the 'Interoperability of Heterogeneous IoT Platforms' (INTER-IoT) project under Grant Agreement nº730; 687283.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Arquitectura de Interoperabilidad de dispositivos físicos para el Internet de las Cosas (IoT)

  • Yacchirema Vargas, Diana Cecilia
[ES] La visión del Internet de las cosas (IoT) implica un ecosistema global hiperco-nectado en el que todos los dispositivos con capacidad de comunicación se conecten de manera ubicua a Internet. Sin embargo, para alcanzar todo el po-tencial de IoT, no es suficiente que los dispositivos estén conectados a Inter-net, también necesitan comunicarse e interactúan entre sí. Desafortunadamen-te, construir un ecosistema global de dispositivos que se conecten entre sí sin problemas es prácticamente imposible hoy en día. La razón es que IoT está constituida por una plétora de dispositivos heterogéneos en términos del for-mato de datos y componentes de comunicación que lo forman, como por ejemplo hardware, tecnologías y protocolos de comunicación. Esta heteroge-neidad lleva inevitablemente a la aparición de "silos verticales" que están aisla-dos al resto de IoT (p. ej., todavía necesitamos instalar 5 aplicaciones para in-teractuar con 5 dispositivos diferentes debido a la incompatibilidad entre estos dispositivos), exacerbada aún más por el hecho de que miles de millones de dispositivos de próxima generación dependerán de su capacidad de conectarse entre sí para obtener el mayor beneficio. Por lo tanto, la interoperabilidad de dispositivos es uno de los principales desa-fíos a enfrentar en al ámbito de investigación de IoT. En tal sentido, la abstrac-ción de la heterogeneidad hardware y software subyacentes de los dispositivos y la conversión de protocolos para el intercambio de información entre los mismos presenta una estrategia clave. En esta tesis se ha especificado una ar-quitectura de interoperabilidad para habilitar la comunicación entre dispositivos en IoT y su integración con plataformas IoT estándar. La arquitectura está fundamentada en tendencias de investigación recientes y mejores prácticas como el modelo de referencia arquitectónico (IoT-A) y la arquitectura funcio-nal M2M, pero adaptada a unos requerimientos que hacen que esta solución pueda utilizarse para la implementación de aplicaciones IoT en diferentes en-tornos. El diseño de la arquitectura, se ha llevado a una primera implementación proto-tipo, denominada smart IoT gateway, que tiene como objetivo habilitar la inter-operabilidad técnica y sintáctica de dispositivos heterogéneos. De forma análo-ga, se proyecta una segunda implementación, denominada arquitectura de in-terconexión la cual extiende las funcionalidades del smart IoT gateway a través de la integración de una entidad proxy de interconexión que permite la integración de dispositivos heterogéneos con plataformas IoT estándar. En forma consecuente con el actual enfoque pragmático de IoT, la utilidad y viabilidad de las implementaciones de la arquitectura se ha demostrado median-te testbeds aplicados a dos casos de uso IoT. Dichos casos de uso se derivan del proyecto Europeo INTER-IoT financiado por la Unión Europea a través del programa Horizonte H2020. El primero de ellos, es INTER-LogP, que tiene por objetivo mejorar los procesos de gestión de transporte y logística en entor-nos portuarios, por medio del intercambio de información entre las distintas plataformas IoT heterogéneas involucradas. El segundo, INTER-Health, pre-tende monitorizar el entorno y el estilo de vida de las personas de forma des-centralizada y con movilidad, para prevenir problemas de salud. Finalmente, la experiencia adquirida en el despliegue de estos casos de uso ha motivado el desarrollo de nuevas propuestas y estudios de aplicación de IoT que representan una contribución adicional de la presente tesis doctoral., [CA] La visió de la Internet de les coses (IoT) implica un ecosistema global hiperco-nectado en el qual tots els dispositius amb capacitat de comunicació es connec-ten de manera ubiqua a la Internet. No obstant això, per a aconseguir tot el po-tencial de IoT, no és suficient que els dispositius estiguen connectats a Inter-net, també necessiten comunicar-se i interactuen entre si. Desafortunadamen-et, construir un ecosistema global de dispositius que es connecten entre si sen-se problemes és pràcticament impossible hui dia. El raó és que IoT està consti-tuïda per una plètora de dispositius heterogenis en termes del for-mate de da-des i components de comunicació que ho formen, com per exemple maquinari, tecnologies i protocols de comunicació. Aquesta heteroge-neidad porta inevi-tablement a l'aparició de "sitges verticals" que estan aisla-dues a la resta de IoT (p. ex., encara necessitem instal·lar 5 aplicacions per a in-teractuar amb 5 dis-positius diferents a causa de la incompatibilitat entre aquests dispositius), exa-cerbada encara més pel fet que milers de milions de dispositius de pròxima generació dependran de la seua capacitat de connectar-se entre si per a obtindre el major benefici. Per tant, la interoperabilitat de dispositius és un dels principals desa-fíos a en-frontar en a l'àmbit d'investigació de IoT. En tal sentit, la abstrac-ción de l'hete-rogeneïtat maquinari i programari subjacent dels dispositius i la conversió de protocols per a l'intercanvi d'informació entre els mateixos presenta una estra-tègia clau. En aquesta tesi s'ha especificat una ar-quitectura d'interoperabilitat per a habilitar la comunicació entre dispositius en IoT i la seua integració amb plataformes estàndard. L'arquitectura està fonga-esmentada en tendències d'in-vestigació recents i millors pràctiques com el model de referència arquitectònic IoT-A i l'arquitectura funcional M2M, però adaptada a un requeriments que fan que aquesta solució puga utili-zarse per a la implementació d'aplicacions IoT en diferents entorns. El disseny de l'arquitectura, s'ha portat a una primera implementació proto-tipus, denominada smart IoT gateway, que té com a objectiu habilitar la inter-operabilitat tècnica i sintàctica de dispositius heterogenis. De forma análo-ga, es projecta una segona implementació, denominada arquitectura de in-terconexión la qual estén les funcionalitats del smart IoT gateway a través de la integració d'una entitat proxy d'interconnexió que permet la integració de dis-positius heterogenis amb plataformes IoT estàndard. En forma conseqüent amb l'actual enfocament pragmàtic de IoT, la utilitat i viabilitat de les implementacions de l'arquitectura s'ha demostrat medien-et testbeds aplicats a dos casos d'ús IoT derivats del projecte Europeu INTER-IoT finançat per la Unió Europea a través del programa Horitzó H2020. El primer d'ells, és INTER-LogP, que té per objectiu millorar els processos de gestió de transport i logística en entorns portuaris, per mitjà de l'intercanvi d'in-formació entre les diferents plataformes IoT hete-rogéneas involucrades. El segon, INTER-Health, pretén monitorar l'entorn i l'estil de vida de les perso-nes de forma descentralitzada i amb mo-vilidad, per a previndre problemes de salut. Finalment, l'experiència adquirida en el desplegament d'aquests casos d'ús ha motivat el desenvolupament de noves propostes i estudis d'aplicació de IoT que representen una contribució addicional de la present tesi doctoral., [EN] The vision of the Internet of Things (IoT) implies a hyper-connected global ecosystem in which all devices with communication capacity are ubiquitously connected to the Internet. However, to reach the full potential of IoT, it is not enough that the devices are connected to Internet, they also need to communi-cate and interact with each other. Unfortunately, building a global ecosystem of devices that connect with each other without problems is practically impossible nowadays. The reason is that IoT is constituted by a plethora of heterogeneous devices in terms of the data format and communication components that make it up, such as hardware, technologies and communication protocols. This het-erogeneity inevitably leads to the appearance of "vertical silos" that are isolated from the rest of the IoT (e.g., we still need to install 5 applications to interact with 5 different devices due to the incompatibility between these devices), further exacerbated by the fact that billions of next-generation devices will depend on their ability to connect with each other to get the most benefit. Therefore, the interoperability of devices is one of the main challenges to face in the field of IoT research. In this sense, the abstraction of the underlying hardware and software heterogeneity of the devices and the conversion of pro-tocols for the exchange of information between them presents a key strategy. This thesis has specified an interoperability architecture to enable communica-tion between devices in IoT and its integration with standard platforms. The architecture is based on recent research trends and best practices such as the architectural reference model (IoT-A) and the M2M functional architecture but adapted to some requirements that make this solution be used for the imple-mentation of IoT applications in different environments. The design of the architecture has led to first prototype implementation, called smart IoT gateway, which aims to enable the technical and syntactic interoper-ability of heterogeneous devices. Analogously, a second implementation is planned, called an interconnection architecture which extends the functionali-ties of the smart IoT gateway through the integration of a proxy interconnec-tion entity that allows the integration of heterogeneous devices with standard IoT platforms. Consistent with the current pragmatic IoT approach, the utility and feasibility of architecture implementations have been demonstrated by means of testbeds applied to two IoT use cases. These use cases are derived from the European INTER-IoT project financed by the European Union through the Horizon H2020 program. The first of these is INTER-LogP, which aims to improve transport and logistics management processes in port environments, through the exchange of information between the different heterogeneous IoT plat-forms involved. The second, INTER-Health, pretend to monitor the environ-ment and lifestyle of people in a decentralized manner and with mobility, to prevent health problems. Finally, the experience acquired in the deployment of these cases of use has motivated the development of new proposals and IoT application studies that represent an additional contribution to the present doctoral thesis., Al Estado Ecuatoriano, y en especial a la Secretaría de Educación Superior, Ciencia, Tecnología e Innovación (SENSECYT) y a la Escuela Politécnica Nacional (EPN). [También] al proyecto europeo IoT financiado por la Unión Europea a través del programa Horizonte H2020
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Increasing LPWAN scalability by means of concurrent multiband IoT technologies: an industry 4.0 use case

  • Adame, Toni
  • Bel, Albert
  • Bellalta, Boris
One of the most important challenges of the Internet of Things (IoT) in the next years will be the smooth incorporation of millions of smart devices into its communications paradigm. The greater coverage area of sub-1-GHz low-power wide area networks (LPWANs) makes them a suitable technology to easily encompass hundreds of end devices under a single base station. However, LPWAN inherent simplicity affects negatively on scalability, as these networks are not flexible enough to deal with a high number of nodes unless their traffic load is really low, which limits many potential use-cases. This paper analyzes the scalability issue in LPWAN and proposes the INTER-HARE protocol: a solution based on the use of concurrent multiband IoT technologies, where an 868-MHz LPWAN acts as transparent backhaul for a set of subnetworks working at 2.4 GHz. The implementation of the INTER-HARE protocol on a real IoT platform was assessed both in several laboratory testbeds and in a pilot developed in the premises of an industrial company, proving its suitability in non-delay sensitive monitoring applications with end devices scattered throughout the targeted area., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502) and the Open Call of INTER-IoT, Research and Innovation action - Horizon 2020 European Project, Grant Agreement #687283, financed by the European Union. It also received funding from the Catalan government through projects SGR-2017-1188 and SGR-2017-1739, and from the Spanish government under the project TEC2016-79510-P.