Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

TECNALIA Publications
Publication Artículo científico (JournalArticle)

Selective leaching of copper and zinc from primary ores and secondary mineral residues using biogenic ammonia

  • Williamson, Adam J.
  • Verbruggen, Florian
  • Chavez Rico, Vania S.
  • Bergmans, Jef
  • Spooren, Jeroen
  • Yurramendi, Lourdes
  • Laing, Gijs Du
  • Boon, Nico
  • Hennebel, Tom
With the number of easily accessible ores depleting, alternate primary and secondary sources are required to meet the increasing demand of economically important metals. Whilst highly abundant, these materials are of lower grade with respect to traditional ores, thus highly selective and sustainable metal extraction technologies are needed to reduce processing costs. Here, we investigated the metal leaching potential of biogenic ammonia produced by a ureolytic strain of Lysinibacillus sphaericus on eight primary and secondary materials, comprised of mining and metallurgical residues, sludges and automotive shredder residues (ASR). For the majority of materials, moderate to high yields (30–70%) and very high selectivity (>97% against iron) of copper and zinc were obtained with 1 mol L−1 total ammonia. Optimal leaching was achieved and further refined for the ASR in a two-step indirect leaching system with biogenic ammonia. Copper leaching was the result of local corrosion and differences in leaching against the synthetic (NH4)2CO3 control could be accounted for by pH shifts from microbial metabolism, subsequently altering free NH3 required for coordination. These results provide important findings for future sustainable metal recovery technologies from secondary materials.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Microalgae: A sustainable adsorbent with high potential for upconcentration of indium(iii) from liquid process and waste streams

  • Nicomel, Nina Ricci
  • Otero-González, Lila
  • Arashiro, Larissa Terumi|||0000-0001-8675-285X
  • Garfi, Marianna|||0000-0001-9234-5580
  • Ferrer Martí, Ivet|||0000-0002-4568-4843
  • Van Der Voort, Pascal
  • Verbeken, Kim
  • Hennebel, Tom
  • Du Laing, Gijs
Indium (In) is a critical raw material heavily demanded in the optical-electronics industry. With its high supply risk, sustainable technologies are needed to recover In(III) from secondary sources, such as leachates from sludge produced by zinc processing industries (e.g., jarosite) and indium tin oxide etching wastewater. This study presents In(III) biosorption as an eco friendly alternative to conventional physicochemical recovery technologies., This study was partly supported by METGROW+, a project of the European Union’s Horizon 2020 research and innovation programme under grant agreement No 690088. N. R. N. acknowledges the UGent Special Research Fund (BOF) for the PhD scholarship. L. O. G. acknowledges METGROW+ for the post-doctoral scholarship. L. A. acknowledges the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 676070 (MSCA-ITN project SuPER-W) for her PhD scholarship. M. G. acknowledges the Spanish Ministry of Economy and Competitiveness (RYC-2016-20059).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microalgae: A sustainable adsorbent with high potential for upconcentration of indium(iii) from liquid process and waste streams

  • Nicomel, Nina Ricci
  • Otero-González, Lila
  • Arashiro, Larissa Terumi
  • Garfi, Marianna
  • Ferrer Martí, Ivet
  • Van Der Voort, Pascal
  • Verbeken, Kim
  • Hennebel, Tom
  • Du Laing, Gijs
Indium (In) is a critical raw material heavily demanded in the optical-electronics industry. With its high supply risk, sustainable technologies are needed to recover In(III) from secondary sources, such as leachates from sludge produced by zinc processing industries (e.g., jarosite) and indium tin oxide etching wastewater. This study presents In(III) biosorption as an eco friendly alternative to conventional physicochemical recovery technologies., This study was partly supported by METGROW+, a project of the European Union’s Horizon 2020 research and innovation programme under grant agreement No 690088. N. R. N. acknowledges the UGent Special Research Fund (BOF) for the PhD scholarship. L. O. G. acknowledges METGROW+ for the post-doctoral scholarship. L. A. acknowledges the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 676070 (MSCA-ITN project SuPER-W) for her PhD scholarship. M. G. acknowledges the Spanish Ministry of Economy and Competitiveness (RYC-2016-20059)., Postprint (updated version)