Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

A flexible strain-responsive sensor fabricated from a biocompatible electronic ink via an additive-manufacturing process

  • Britton, James
  • Krukiewicz, Katarzyna
  • Chandrana, Malu
  • Fernández Hernández, Jorge
  • Poudel, Anup
  • Sarasua Oiz, José Ramón
  • FitzGerald, Una
  • Biggs, Manus J. P.
Biosensor technologies are of great interest for applications in wearable electronics, soft robotics and implantable biomedical devices. To accelerate the adoption of electronics for chronic recording of physiological parameters in health and disease, there is a demand for biocompatible, conductive & flexible materials that can integrate with various tissues while remaining biologically inert. Conventional techniques used to fabricate biosensors, such as mask lithography and laser cutting, lack the versatility to produce easily customisable, micro-fabricated biosensors in an efficient, cost-effective manner. In this paper, we describe the development and characterisation of an electronic ink made from an environmentally sustainable copolymer - x-pentadecalactone-co-e-decalactone, (PDL) incorporating silver nanowires (AgNW), which are known for their antimicrobial and conductive properties. The composites were shown to possess a low percolation threshold (1% w/w of AgNW to PDL), achieve a low electrical resistance (320 +/- 9 O/sq) and a high electrical capacitance (2.06 +/- 0.06 mF/cm2). PDL nanocomposites were biocompatible, demonstrated in vitro through the promotion of neural adhesion and prevention of astrocyte activation. An optimised ink formulation was subsequently used to fabricate strain-responsive biosensors with high spatial resolution (sub-100 mm) using a direct write additive manufacturing process. Using a customized in vitro set-up, the sensitivity of these biosensors to biologically-relevant strains was assessed under simulated physiological conditions for 21 days. Critically, these 3D printed biosensors have applications in chronic prophylactic monitoring of pressure changes within the body and related pathologies., This publication has emanated from research conducted with the financial support of the Science Foundation Ireland (SFI) Technology Innovation Development Programme, grant no. 15/TIDA/2992 and was co-funded under the European Regional Development Fund under Grant Number 13/RC/2073 and the Hardiman PhD Research Scholarship from the National University of Ireland, Galway. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 713690. The authors acknowledge the facilities and scientific and technical assistance of the Centre for Microscopy & Imaging at the National University of Ireland Galway, a facility that is funded by NUIG and the Irish Government's Programme for Research in Third Level Institutions, Cycles 4 and 5, National Development Plan 20072013.r The Basque Government GV/EJ (Department of Education, Linguistic Politics and Culture) is also acknowledged for financial support to the consolidated research groups project IT927-16 (UPV/EHU, GIC/152).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Electrical Percolation in Extrinsically Conducting, Poly(εpsilon-Decalactone) Composite Neural Interface Materials

  • Krukiewicz, Katarzyna
  • Britton, James
  • Wieclawska, Daria
  • Skorupa, Malgorzata
  • Fernández Hernández, Jorge
  • Sarasua Oiz, José Ramón
  • Biggs, Manus J. P.
By providing a bidirectional communication channel between neural tissues and a biomedical device, it is envisaged that neural interfaces will be fundamental in the future diagnosis and treatment of neurological disorders. Due to the mechanical mismatch between neural tissue and metallic neural electrodes, soft electrically conducting materials are of great benefit in promoting chronic device functionality. In this study, carbon nanotubes (CNT), silver nanowires (AgNW) and poly(hydroxymethyl 3,4-ethylenedioxythiophene) microspheres (MSP) were employed as conducting fillers within a poly(epsilon-decalactone) (EDL) matrix, to form a soft and electrically conducting composite. The effect of a filler type on the electrical percolation threshold, and composite biocompatibility was investigated in vitro. EDL-based composites exhibited favourable electrochemical characteristics: EDL/CNT-the lowest film resistance (1.2±0.3 kOmega), EDL/AgNW-the highest charge storage capacity (10.7±0.3 mC cm-2), and EDL/MSP-the highest interphase capacitance (1478.4±92.4Fcm-2). All investigated composite surfaces were found to be biocompatible, and to reduce the presence of reactive astrocytes relative to control electrodes. The results of this work clearly demonstrated the ability of high aspect ratio structures to form an extended percolation network within a polyester matrix, resulting in the formulation of composites with advantageous mechanical, electrochemical and biocompatibility properties., This publication has emanated from research conducted with the financial support of Science Foundation Ireland and is co-funded under the European Regional Development Fund under Grant Number 13/RC/2073. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 713690 and SFI Technology Innovation Development Programme, Grant no. 15/TIDA/2992. This research has received funding from the National University of Ireland, Galway, Hardiman PhD scholarship 2016-2020. This work has been supported by the Polish National Science Centre (SONATA-2016/23/D/ST5/01306 and OPUS-2019/35/B/ST5/00995) and the Silesian University of Technology, Poland (04/040/BK_20/0113). This work has also received funding from the Basque Government GV/EJ (Department of Education, Linguistic Politics and Culture) through the consolidated research groups project IT927-16 (UPV/EHU, GIC/152), and a postdoctoral grant for J. F. from the University of the Basque Country (UPV/EHU). The authors acknowledge the facilities and scientific and technical assistance of the Centre for Microscopy & Imaging at the National University of Ireland Galway, a facility that is funded by NUIG and the Irish Government's Programme for Research in Third Level Institutions, Cycles 4 and 5, National Development Plan 2007-2013
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing sulfatide-tissue lectin recognition with functionalized glycodendrimersomes

  • Murphy, Paul V.
  • Romero, Antonio
  • Xiao, Qi
  • Ludwig, Anna-Kristin
  • Jogula, Srinivas
  • Shilova, Nadezhda V.
  • Singh, T.
  • Gabba, Adele
  • Javed, Bilal
  • Zhang, Dapeng
  • Medrano, Francisco Javier
  • Kaltner, Herbert
  • Kopitz, Jürgen
  • Bovin, Nicolai V.
  • Wu, Albert M.
  • Klein, Michael L.
  • Percec, V.
  • Gabius, Hans-Joachim
74 p.-5 fig.-3 schem.-6 fig. supl.-4 tab.supl.-3 schem. supl, The small 3-O-sulfated galactose head group of sulfatides, an abundant glycosphingolipid class, poses the (sphinx-like) riddle on involvement of glycan bridging by tissue lectins (sugar code). First, synthesis of head group derivatives for functionalization of amphiphilic dendrimers is performed. Aggregation of resulting (biomimetic) vesicles, alone or in combination with lactose, demonstrates bridging by a tissue lectin (galectin-4). Physiologically, this can stabilize glycolipid-rich microdomains (rafts) and associate sulfatide-rich regions with specific glycoproteins. Further testing documents importance of heterobivalency and linker length. Structurally, sulfatide recognition by galectin-8 is shown to involve sphingosine’s OH group as substitute for the 30-hydroxyl of glucose of lactose.These discoveries underscore functionality of this small determinant on biomembranes intracellularly and on the cell surface. Moreover, they provide a role model to examine counterreceptor capacity of more complex glycans of glycosphingolipids and to start their bottom-up glycotope surface programming., This work is supported by NSF Grants DMR1066116, DMR-1720530, and DMR-1807127 (to V.P.), the P. Roy Vagelos Chair at the University of Pennsylvania (V.P.), the Sheikh Saqr Research Foundation (to M.L.K.), the Science Foundation Ireland (SFI) and the European Regional Development Fund (Grant Number 13/RC/ 2073 to CÚRAM, 16/IA/4419 to P.V.M.), the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 713690 (Medtrain, to CÚRAM & S.J.), the Irish Research Council (PhD scholarship to A.G.), the Grant BFU2016-77835-R of the Spanish Ministry of Economy and Competitiveness (A.R.), as well as the COST Action CA18103 (InnoGly)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Multimodal Scaffold for SDF1 Delivery Improves Cardiac Function in a Rat Subacute Myocardial Infarct Model

  • Perez-Estenaga, Iñigo
  • Chevalier, Merari Tumin
  • Peña, Estefania
  • Abizanda, Gloria
  • Alsharabasy, Amir M.
  • Larequi, Eduardo
  • Cilla, Myriam
  • Perez, Marta M.
  • Gurtubay, Jon
  • Garcia-Yebenes Castro, Manuel
  • Prosper, Felipe
  • Pandit, Abhay
  • Pelacho, Beatriz
Ischemic heart disease is one of the leading causes of death worldwide. The efficient delivery of therapeutic growth factors could counteract the adverse prognosis of post-myocardial infarction (post-MI). In this study, a collagen hydrogel that is able to load and appropriately deliver pro-angiogenic stromal cell-derived factor 1 (SDF1) was physically coupled with a compact collagen membrane in order to provide the suture strength required for surgical implantation. This bilayer collagen-on-collagen scaffold (bCS) showed the suitable physicochemical properties that are needed for efficient implantation, and the scaffold was able to deliver therapeutic growth factors after MI. In vitro collagen matrix biodegradation led to a sustained SDF1 release and a lack of cytotoxicity in the relevant cell cultures. In vivo intervention in a rat subacute MI model resulted in the full integration of the scaffold into the heart after implantation and biocompatibility with the tissue, with a prevalence of anti-inflammatory and pro-angiogenic macrophages, as well as evidence of revascularization and improved cardiac function after 60 days. Moreover, the beneficial effect of the released SDF1 on heart remodeling was confirmed by a significant reduction in cardiac tissue stiffness. Our findings demonstrate that this multimodal scaffold is a desirable matrix that can be used as a drug delivery system and a scaffolding material to promote functional recovery after MI.