Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Tesis doctoral (DoctoralThesis)

Fluid modeling and simulation of the electron population in Hall Effect Thrusters with complex magnetic topologies

  • Pérez Grande, Daniel
Mención Internacional en el título de doctor, La propulsión eléctrica es una tecnología consolidada, utilizada por vehículos espaciales para llevar a cabo maniobras no atmosféricas. Este tipo de motores cohete ha estado presente en numerosas aplicaciones en las últimas décadas y sus usos van desde el mantenimiento de la posición orbital de satélites comerciales a transferencias interplanetarias en misiones de exploración. La mayor ventaja de los numerosos tipos de propulsores eléctricos es su capacidad de proporcionar un determinado impulso a un coste de propelente reducido, en comparación con otros tipos de propulsión. El desarrollo de los motores de plasma, la clase más común de propulsor eléctrico, se ha visto impedido en mayor medida que los cohetes químicos, por ejemplo, debido a la complejidad de la interacción de los fenómenos físicos y a dificultades asociadas con las campañas experimentales. En las últimas dos décadas se ha introducido el uso de simulaciones numéricas para ayudar a la caracterización de estos aparatos. A pesar de que el diseño asistido por ordenador juega aún un papel muy reducido, el incremento de recursos computacionales y la creciente exactitud de los modelos físicos han permitido a estas simulaciones describir numerosos mecanismos físicos, explorar el espacio de diseño de estos aparatos y complementar los ensayos experimentales. Esta tesis está centrada en el estudio numérico de la población de electrones en descargas de plasma poco colisionales, bajo la influencia de campos eléctricos y magnéticos. El trabajo realizado ha contribuido al desarrollo de una nueva herramienta de simulación híbrida, cuasi-neutra, bidimensional y axisimétrica, denominada HYPHEN; su naturaleza híbrida se debe al tratamiento por separado de las especies pesadas, descritas a través de un conocido método de partículas, y de la población de electrones, descrita como un fluido. Una de nuestras mayores contribuciones es la introducción de un modelo anisotróspico de dos temperaturas, que permite capturar los efectos de la falta de uniformidad del campo magnético sobre el transporte de electrones. Esta función abre el camino para la caracterización de nuevos propulsores electromagnéticos. Actualmente, el código está orientado hacia la simulación de las regiones del canal y de la pluma cercana en motores de efecto Hall, en los que se enfoca esta tesis. Parte del trabajo se ha dedicado a dotar al código de las capacidades necesarias para la simulación de topologías magnéticas complejas. El presente documento detalla la motivación detrás de HYPHEN, su metodología de diseño y la influencia de trabajos previos. Se ha prestado una especial atención al modelo fluido propuesto, detallando el uso de una malla alineada con el campo magnético para el tratamiento numérico de la población confinada de electrones, para la cual se han utilizado diversos métodos ad-hoc de discretización temporal y espacial. Varios modelos auxiliares también se han descrito, con el objetivo de caracterizar la respuesta de la capa límite del plasma y de los distintos procesos colisionales en el seno del mismo. Se presenta también el estudio de los aspectos numéricos del modelo fluido, incluyendo la sensibilidad a condiciones iniciales, a los valores del paso temporal, el refinamiento de la malla, etc. Finalmente, HYPHEN se ha testeado para la configuración de un conocido motor Hall. Los resultados demuestran que las propiedades físicas y las actuaciones obtenidas son comparables con resultados provenientes de estudios experimentales. Bajo este contexto, se ha llevado a cabo un estudio paramétrico para determinar la dependencia de la respuesta del motor con algunos de los parámetros más relevantes del modelo, tales como el transporte anómalo de electrones o la fracción de termalización de la capa límite, y con los diferentes modelos colisionales., Electric propulsion is an established technology used for non-atmospheric spacecraft maneuvering. This type of rockets have been present in numerous applications in the last decades, and their uses range from station keeping of commercial satellites to interplanetary transfers in deep space exploration missions. While electric propulsion thrusters are multi-faceted, presenting numerous and distinct types, their best selling point is the capability to deliver a given impulse at much lower propellant cost, in comparison to other types of propulsion. The maturation of plasma thrusters, the most common type of electric propulsion devices, has faced more limitations than chemical rockets, for example, due to the complexity of the physical interactions at play, and the difficulties associated with experimental campaigns. Over the past two decades, numerical simulations were introduced as a novel tool in the characterization of these devices. While true computer-aided-design is not yet a reality, the increment of computational resources and the heightened fidelity of the physical models have allowed to describe numerous physical mechanisms, explore the design space of these devices and complement experimental testing. This thesis focuses on the numerical study of the electron population in weakly collisional plasma discharges, under the influence of applied magnetic and electric fields. The work has been a primary contribution in the development of a new, quasi-neutral, two-dimensional, axisymmetric, hybrid simulation tool, called HYPHEN. Its hybrid nature responds to the different treatment of the heavy species populations, described through a well known discrete-particle approach, and the electron population, described as a fluid. One of our main contributions has been the introduction of a two-temperature anisotropic approach, which allows capturing of the magnetic non-uniformity effects over electron transport; this feature paves the way for the characterization of some novel electromagnetic propulsion technologies. Presently, the code is oriented to the simulation of the channel and near-plume regions in Hall effect thrusters, which have been the main focal point of the thesis. Dedicated efforts have been directed to providing the capabilities for the simulation of the plasma under complex magnetic field topologies. The manuscript details the motivation and design methodology behind HYPHEN, as well as the influence of previous work. Special attention has been given to the particularities of the proposed fluid model; this includes the use of a magnetic field aligned mesh for the numerical treatment of the electron population under magnetic confinement, for which ad-hoc spatial and temporal discretization methods have been proposed. Additional ancillary physical models have also been developed, characterizing the response of plasma boundary layers and the various collisional processes in the plasma. The numerical aspects of the model have been investigated, including the sensitivity to initial conditions, time-step values, mesh refinement, etc. Finally, HYPHEN has been tested in the context of a representative Hall-thruster configuration. The results were found to be in line with experimentally reported thruster performances and plasma discharge quantities. Additionally, a parametric investigation has been carried out in order to investigate the dependency of the thruster response with the most relevant model parameters, such as the anomalous electron transport or the boundary layer thermalization fraction, and the different collisional models., This work has been partially supported by the CHEOPS project, that received funding from the European Union’s Horizon 2020 research and innovation program, under grant agreement No. 730135. Additional support came from Project ESP2016-75887, funded by the National research and development program of Spain., Programa Oficial de Doctorado en Plasmas y Fusión Nuclear, Presidente: José Javier Honrubia Checa.- Secretario: Mario Merino Martínez.- Vocal: Paul-Quentin Elias
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Particle modeling of radial electron dynamics in a controlled discharge of a Hall thruster

  • Domínguez Vázquez, Adrián
  • Ahedo Galilea, Eduardo Antonio
  • Taccogna, F.
Special issue on plasma-surface Interactions, An improved radial particle-in-cell model of an annular Hall effect thruster discharge with secondary-electron emission from the walls and a radial magnetic field is presented. New algorithms are implemented: first, to adjust the mean neutral density to the desired mean plasma density; second, to avoid the refreshing of axially accelerated particles; and third, to correctly weigh low-density populations (such as secondary electrons). The high-energy tails of the velocity distribution functions of primary and secondary electrons from each wall are largely depleted, leading to temperature anisotropies for each species. The secondary-electron populations are found to be partially recollected by the walls and partially transferred to the primary population. The replenishment ratio of the primary high-energy tail is determined based on the sheath potential fall. Significant asymmetries at the inner and outer walls are found for the collected currents, the mean impact energy, and the wall and sheath potentials. Radial profiles in the plasma bulk are asymmetric too, due to a combination of the geometric expansion, the magnetic mirror effect, and the centrifugal force (emanating from the E x B drift). The temperature anisotropy and non-uniformity, and the centrifugal force modify the classical Boltzmann relation on electrons along the magnetic lines., The work at UC3M was supported by the CHEOPS project, funded by the European Union’s Horizon 2020 Research and Innovation Programme, under Grant Agreement 730135. Additional support came from Spain’s National Research and Development Plan (Project ESP2016-75887). F T was sup-ported by the Apulia Space Project (grant PON03PE_00067_6).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Axisymmetric plasma plume characterization with 2D and 3D particle codes

  • Domínguez Vázquez, Adrián
  • Cichocki, Filippo
  • Merino Martínez, Mario
  • Fajardo Peña, Pablo
  • Ahedo Galilea, Eduardo Antonio
The expansion of a rarefied axisymmetric plume emitted by a plasma thruster is analyzed and compared with a 3D Cartesian-type and a 2D cylindrical-type simulation code, both based on a particle-in-cell formulation for the heavy species and a simple Boltzmann-type model for the electrons. The first part of the paper discusses the 2D code numerical challenges in the moving of particles, their generation within the cells, and the weighting to the nodes, caused by the radial non-uniformity and the singular and boundary character of the symmetry axis. The second part benchmarks the 2D code against the 3D one for a high-energy, unmagnetized plume with three major species populations (injected neutrals, singly-charged and doubly-charged ions) and three minor species populations (constituted by particles coming from collisional processes, such as the charge-exchange reactions). The excellent agreement found in the results proves that both plume codes are capable of simulating, with a reasonable noise level, heavy particle populations differing by several orders of magnitude in number density. For simulations with a comparable level of accuracy, the 2D code presents a ten-fold gain in computational cost, although the symmetry axis remains its weakest point, due to particle depletion there and the related weighting noise.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the Performance Limiting Factors of Cs2AgBiBr6 Double-Perovskite Solar Cells

  • Longo, Giulia|||0000-0002-1163-1110
  • Mahesh, S.
  • Buizza, Leonardo R. V.
  • Wright, Adam D.
  • Ramadan, Alexandra J.
  • Abdi-Jalebi, Mojtaba
  • Nayak, Pabitra K.
  • Herz, Laura M.
  • Snaith, Henry J.
[EN] Double perovskites have recently emerged as possible alternatives to lead-based halide perovskites for photovoltaic applications. In particular, Cs2AgBiBr6 has been the subject of several studies because of its environmental stability, low toxicity, and its promising optoelectronic features. Despite these encouraging features, the performances of solar cells based on this double perovskite are still low, suggesting severe limitations that need to be addressed. In this work we combine experimental and theoretical studies to show that the short electron diffusion length is one of the major causes for the limited performance of Cs2AgBiBr6 solar cells. Using EQE measurements on semitransparent Cs2AgBiBr6 solar cells we estimate the electron diffusion length to be only 30 nm and corroborated this value by terahertz spectroscopy. By using photothermal deflection spectroscopy and surface photovoltage measurements we correlate the limited electron diffusion length with a high density of electron traps. Our findings highlight important faults affecting this double perovskite, showing the challenges to overcome and hinting to a possible path to improve the efficiency of Cs2AgBiBr6 solar cells., This work was funded by EPSRC through projects EP/M015254/2, EP/S516119/1, EP/M005143/1, and EP/P032591/1 and by H2020 through the European Union's Horizon 2020 research and innovation programme through PERTPV project under Grant Agreement No. 763977 and CHEOPS project under Grant Agreement No. 730135. S.M. acknowledges funding from the Rhodes Trust (India & Worcester 2016). L.R.V.B. thanks the Centre for Doctoral Training in New and Sustainable Photovoltaics and to the Oxford-Radcliffe Scholarship for financial support. P.K.N. acknowledges the support via intramural funds at TIFR Hyderabad from the Department of Atomic Energy (DAE), India. M.A.-J. thanks Cambridge Materials Limited, Wolfson College, University of Cambridge, and EPSRC for their funding and technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the horizontal aspect ratio on thermocapillary convection stability in annular pool with surface heat dissipation

  • López-Núñez, E.
  • Fajardo, P.
  • Pérez Quiles, María Jezabel
  • Hoyas, Sergio|||0000-0002-8458-7288
[EN] A linear stability analysis of the thermoconvective problem of a thin liquid film contained in an annular domain has been conducted. The influence of the horizontal aspect ratio on the solution has been considered by keeping a fixed external wall while the internal radius of the annular domain was modified. The parameter used in the study, Gamma(h), has been defined as the ratio of the internal radius to the domain depth. The other control parameter of the study is the Prandtl number ranging from 0.7 to 50, i.e. characteristic of fluids as air to n-butanol. The study has been performed for different Bond (Bo) regimes ranging from 0.0 for surface tension dominated flows to 67 for buoyancy dominated ones. Three different kind of bifurcations are found in the Gamma(h) - Pr plane for large Bonds, while for low Bonds only two of them appear. In the case of pure buoyancy or surface tension flows, for every Gamma(h) there exists a Prandtl number such that oscillatory and stationary coexist in a co-dimension two bifurcation point. These transitions show a strong dependency with the Bond number. Indeed, the lower transition disappears for low Bo and the upper one disappears with intermediate Bo values. Furthermore, there is a non-linear dependency of the number of structures of the growing bifurcation with Gamma(h). These co-dimension two lines show a strong dependency with Bo. Firstly, looking at the frontier between HWI and LR regions, for large Bo numbers, Pr increases with Gamma(h), while for low Bo the trend is reversed. Additionally, this transition only appears in the extreme Bo cases, for the central values of the considered, no transition is found. Similarly, the second transition found only appears for Bo larger than 30., SH and MJPQ work have been supported by project RTI2018-102256-B-I00 of Mineco/FEDER. PF work has been partially supported by the Spain's National Research and Development Plan (Project ESP2016-75887) and by the CHEOPS project (Grant Agreement 730135). This work was supported by a generous grant of computer time from the supercomputing center of the UPV.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterisation of the warm-Jupiter TOI-1130 system with CHEOPS and a photo-dynamical approach

  • Borsato, Luca
  • Barrado y Navascués, David
  • Ribas, Ignasi
Borsato, L., et al., [Context] Among the thousands of exoplanets discovered to date, approximately a few hundred gas giants on short-period orbits are classified as ‘lonely’ and only a few are in a multi-planet system with a smaller companion on a close orbit. The processes that formed multi-planet systems hosting gas giants on close orbits are poorly understood, and only a few examples of this kind of system have been observed and well characterised., [Aims] Within the contest of a multi-planet system hosting a gas giant on short orbits, we characterise the TOI-1130 system by measuring masses and orbital parameters. This is a two-transiting planet system with a Jupiter-like planet (c) on a 8.35 days orbit and a Neptune-like planet (b) on an inner (4.07 days) orbit. Both planets show strong anti-correlated transit timing variations (TTVs). Furthermore, radial velocity (RV) analysis showed an additional linear trend, a possible hint of a non-transiting candidate planet on a far outer orbit., [Methods] Since 2019, extensive transit and radial velocity observations of the TOI-1130 have been acquired using TESS and various ground-based facilities. We present a new photo-dynamical analysis of all available transit and RV data, with the addition of new CHEOPS and ASTEP+ data, which achieve the best precision to date on the planetary radii and masses and on the timings of each transit., [Results] We were able to model interior structure of planet b constraining the presence of a gaseous envelope of H/He, while it was not possible to assess the possible water content. Furthermore, we analysed the resonant state of the two transiting planets, and we found that they lie just outside the resonant region. This could be the result of the tidal evolution that the system underwent. We obtained both masses of the planets with a precision of less than 1.5%, and radii with a precision of about 1% and 3% for planet b and c, respectively., LBo, GBr, VNa, IPa, GPi, RRa, GSc, VSi, and TZi acknowledge support from CHEOPS ASI-INAF agreement no. 2019-29-HH.0. This work has been carried out within the framework of the NCCR PlanetS supported by the Swiss National Science Foundation under grants 51NF40_182901 and 51NF40_205606. AL acknowledges support of the Swiss National Science Foundation under grant number TMSGI2_211697. This work has been carried out within the framework of the NCCR PlanetS supported by the Swiss National Science Foundation under grants 51NF40_182901 and 51NF40_205606. This work uses data obtained with the ASTEP+ telescope, at Concordia Station in Antarctica. ASTEP+ benefited from the support of the French and Italian polar agencies IPEV and PNRA in the framework of the Concordia station program, from OCA, INSU, Idex UCAJEDI (ANR15-IDEX-01) and ESA through the Science Faculty of the European Space Research and Technology Centre (ESTEC). The Birmingham contribution to ASTEP+ is supported by the European Union’s Horizon 2020 research and innovation programme (grant’s agreement no. 803193/BEBOP), and from the Science and Technology Facilities Council (STFC; grant no. ST/S00193X/1, and ST/W002582/1). ABr was supported by the SNSA. ACC acknowledges support from STFC consolidated grant number ST/V000861/1, and UKSA grant number ST/X002217/1. MNG is the ESA CHEOPS Project Scientist and Mission Representative, and as such also responsible for the Guest Observers (GO) Programme. MNG does not relay proprietary information between the GO and Guaranteed Time Observation (GTO) Programmes, and does not decide on the definition and target selection of the GTO Programme. TWi acknowledges support from the UKSA and the University of Warwick. TZi acknowledges NVIDIA Academic Hardware Grant Program for the use of the Titan V GPU card and the Italian MUR Departments of Excellence grant 2023–2027 “Quantum Frontiers”. DG gratefully acknowledges the financial support from the grant for internationalization (GAND_GFI_23_01) provided by the University of Turin (Italy). YAl acknowledges support from the Swiss National Science Foundation (SNSF) under grant 200020_192038. We acknowledge financial support from the Agencia Estatal de Investigación of the Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 and the ERDF “A way of making Europe” through projects PID2019-107061GB-C61, PID2019-107061GB-C66, PID2021-125627OB-C31, and PID2021-125627OB-C32, from the Centre of Excellence “Severo Ochoa” award to the Instituto de Astrofísica de Canarias (CEX2019-000920-S), from the Centre of Excellence "María de Maeztu” award to the Institut de Ciències de l’Espai (CEX2020-001058-M), and from the Generalitat de Catalunya/CERCA programme. We acknowledge financial support from the Agencia Estatal de Investigación of the Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 and the ERDF “A way of making Europe” through projects PID2019-107061GB-C61, PID2019-107061GB-C66, PID2021-125627OB-C31, and PID2021-125627OB-C32, from the Centre of Excellence “Severo Ochoa” award to the Instituto de Astrofísica de Canarias (CEX2019- 000920-S), from the Centre of Excellence “María de Maeztu” award to the Institut de Ciències de l’Espai (CEX2020-001058-M), and from the Generalitat de Catalunya/CERCA programme. S.C.C.B. acknowledges support from FCT through FCT contracts nr. IF/01312/2014/CP1215/CT0004. C.B. acknowledges support from the Swiss Space Office through the ESA PRODEX program. P.E.C. is funded by the Austrian Science Fund (FWF) Erwin Schroedinger Fellowship, program J4595-N. This project was supported by the CNES. The Belgian participation to CHEOPS has been supported by the Belgian Federal Science Policy Office (BELSPO) in the framework of the PRODEX Program, and by the University of Liège through an ARC grant for Concerted Research Actions financed by the Wallonia-Brussels Federation. L.D. thanks the Belgian Federal Science Policy Office (BELSPO) for the provision of financial support in the framework of the PRODEX Programme of the European Space Agency (ESA) under contract number 4000142531. This work was supported by FCT - Fundação para a Ciência e a Tecnologia through national funds and by FEDER through COMPETE2020 through the research grants UIDB/04434/2020, UIDP/04434/2020, 2022.06962.PTDC. O.D.S.D. is supported in the form of work contract (DL 57/2016/CP1364/CT0004) funded by national funds through FCT. B.-O. D. acknowledges support from the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number MB22.00046. This project has received funding from the Swiss National Science Foundation for project 200021_200726. It has also been carried out within the framework of the National Centre of Competence in Research PlanetS supported by the Swiss National Science Foundation under grant 51NF40_205606. The authors acknowledge the financial support of the SNSF. MF and CMP gratefully acknowledge the support of the Swedish National Space Agency (DNR 65/19, 174/18). M.G. is an F.R.S.-FNRS Senior Research Associate. CHe acknowledges support from the European Union H2020-MSCA-ITN-2019 under Grant Agreement no. 860470 (CHAMELEON). SH gratefully acknowledges CNES funding through the grant 837319. KGI is the ESA CHEOPS Project Scientist and is responsible for the ESA CHEOPS Guest Observers Programme. P.M. acknowledges support from STFC research grant number ST/R000638/1. This work was also partially supported by a grant from the Simons Foundation (PI Queloz, grant number 327127). NCSa acknowledges funding by the European Union (ERC, FIERCE, 101052347). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. A.S. acknowledges support from the Swiss Space Office through the ESA PRODEX program. S.G.S. acknowledge support from FCT through FCT contract nr. CEECIND/00826/2018 and POPH/FSE (EC). The Portuguese team thanks the Portuguese Space Agency for the provision of financial support in the framework of the PRODEX Programme of the European Space Agency (ESA) under contract number 4000142255. GyMSz acknowledges the support of the Hungarian National Research, Development and Innovation Office (NKFIH) grant K-125015, a a PRODEX Experiment Agreement No. 4000137122, the Lendület LP2018-7/2021 grant of the Hungarian Academy of Science and the support of the city of Szombathely. V.V.G. is an F.R.S-FNRS Research Associate. J.V. acknowledges support from the Swiss National Science Foundation (SNSF) under grant PZ00P2_208945. N.A.W. acknowledges UKSA grant ST/R004838/1. A.H.M.J.T. acknowledges receiving funding from the Science and Technology Facilities Council (STFC; grantn◦ ST/S00193X/1). A.C.M.C. ackowledges support from the FCT, Portugal, through the CFisUC projects UIDB/04564/2020 and UIDP/04564/2020, with DOI identifiers 10.54499/UIDB/04564/2020 and 10.54499/UIDP/04564/2020, respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001058-M)., Peer reviewed