Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020

  • Basili, Roberto
  • Canora Catalán, Carolina
Artículo escrito por un elevado número de autores, solo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiere, y los autores pertenecientes a la UAM, Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼ 2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium), This work was initially supported by the project Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA), which received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 730900.
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Shaking table tests of a full-scale flat-bottom manufactured steel silo filled with wheat: Main results on the fixed-base configuration

  • Silvestri, Stefano
  • Hernández Montes, Enrique|||0000-0001-6068-1264
H2020 Research Infrastructures, Grant/Award Number: 730900, This paper reports on a series of shaking table tests on a full-scale flat-bottom steel silo filled with soft wheat, characterized by aspect ratio of around 0.9. The specimen was a 3.64-m diameter and 5.50-m high corrugated-wall cylindrical silo. Multiple sensors were used to monitor the static and dynamic response of the filled silo system, including accelerometers and pressure cells. Numerous unidirectional dynamic tests were performed consisting of random signals, sinusoidal inputs, and both artificial and real earthquake records. The objectives of this paper are (i) to provide a general overview of the whole experimental campaign and (ii) to present selected results obtained for the fixed-base configuration. The measured data were processed to assess the static pressures, the dynamic overpressures (related to the effective mass) and the accelerations of monitored points on the silo wall, and to identify the basic dynamic properties (fundamental frequency of vibration, damping ratio, dynamic amplification factors) of the filled silo. Themain findings are discussed and compared with the predictions given by available theoreticalmodels and code provisions. It is found that the fundamental frequency slightly decreases with increasing acceleration, while it slightly increases with increasing compaction of the granular material. For close-to-resonance input, the dynamic amplification (in terms of peak values of accelerations) increases along the height of the silo wall up to values of around 1.4 at the top surface of the solid content. The dynamic overpressures appear to increase with depth (differently from the EN1998-4 expectations), and to be proportional to the acceleration., H2020 Research Infrastructures 730900
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Shaking table testing of groin vaults made by 3D printers

  • Silvestri, Stefano
  • Baraccani, Simonetta
  • Foti, Dora
  • Ivorra, Salvador
  • Theodossopoulos, Dimitris
  • Vacca, Vitantonio
  • Ochoa Roman, Jacqueline
  • Cavallini, Luca
  • Mokhtari, Elnaz
  • White, Rory
  • Dietz, Matt
  • Mylonakis, George
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
A novel experimental study of the dynamic and seismic response of a 2 m × 2 m in plan - 0.7 m in height groin vault model, involving 266 tests conducted on the shaking table of EQUALS laboratory, University of Bristol, UK, is reported. The experimental rig consists of blocks formed by a 3D-printed plastic skin to provide stiffness and strength, filled with mortar. Dry joints between the voussoirs are formed for ease of testing and vault reconstruction. No investigations of this kind and size have been attempted in the past. Two support boundary conditions involving four lateral confinement modes, leading to various vault configurations, were tested. White-noise, sinusoidal and earthquake motions were imposed in one horizontal direction, with progressively increasing amplitude and different frequencies, up to collapse. The model exhibited a strong non-linear behaviour, characterised by decreasing fundamental frequency and increasing damping with increasing table acceleration. Failure mechanisms and collapse accelerations were found to mainly depend on base restraint conditions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Towards an Open Access European Database for Deep Seismic Sounding data

  • Carbonell, Ramón
  • DeFelipe, Irene
  • Alcalde, Juan
  • Ivandic, Monika
  • Roberts, Roland
EGU2020: Sharing Geoscience Online, 4-8 may 2020, Controlled source seismic data acquisition experiments have produced a vast amount of Deep Seismic Sounding (DSS) data since its development in the late 50¿s. These datasets provide critical information on the structure and nature of the crust and the lithosphere, which constitutes a fundamental research tool within Solid Earth Sciences. The DSS datasets are unique and constitute the output of an expensive (in time, effort and cost) scientific process, which evidences the need for their preservation, both the recently acquired and the legacy data. Furthermore, the new developments in processing and imaging techniques generate new possibilities for re-use of the vintage datasets. The availability and accessibility of these datasets, therefore, is of foremost importance for scientists, decision-makers and the general public. The research community, aware of the value of these data, has pushed forward Open Data policies based on the FAIR principles of data management (Findable, Accessible, Interoperable and Reusable). In this respect, a long-term plan has been launched by the European Plate Observation System (EPOS, https://www.epos-ip.org/) e-infrastructure. The focus is to streamline the integrated use of scientific data, data products and services. In close link with EPOS, the Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA, http://www.sera-eu.org/home, a Horizon 2020 project) includes a working package to set up a network on DSS data and products management. This initiative ensures the traceability of the data allowing that third parties can freely access, exploit and disseminate the data by means of permanent, international identifiers: a Digital Object Identifier (DOI) and a Uniform Resource Identifier (URI) or handle. Furthermore, the current aim is to go beyond the FAIR principles by linking the data with its related peer-reviewed publications, other scientific contributions and technical reports, facilitating its re-use. A prototype DSS data exchange system has been developed jointly between the DIGITAL.CSIC (the Spanish National Research Council) services and the Institute of Earth Sciences Jaume Almera-CSIC (https://digital.csic.es/handle/10261/101879, last access January 2020). Within the platform, each dataset includes the acquired raw data and a metadata file. The metadata provides information of the nature of the data itself, list of authors, the context of the data (time and location of the experiments), funding agencies and other relevant legal aspects. The technical information includes the acquisition parameters, data processing and format of the data (SEGY standard in this case - www.seg.org-, broadly used in the geophysics community). In the developed storage protocol, a permanent identifier is assigned once it has been checked that the data meets all the described requirements. This permanent identifier ensures that any visit or download is accounted for. This information is entered into a statistics referencing database and can also be used as a measure of the impact of the data and/or data product., This work is funded by the European Commission (Grant Agreement no: 676564-EPOS IP, Call H2020-INFRADEV-2014-2015/H2020-INFRADEV-1-2015-1, SERA 730900).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Insights on the European Fault-Source Model (EFSM20) as input to the 2020 update of the European Seismic Hazard Model (ESHM20)

  • Basili, Roberto
  • Danciu, Laurentiu
  • Carafa, Michele Matteo Cosimo
  • Kastelic, Vanja
  • Maesano, Francesco
  • Tiberti, Mara Monica
  • Vallone, Roberto
  • Gràcia, Eulàlia
  • Sesetyan, Karin
  • Atanackov, Jure
  • Sket-Motnikar, Barbara
  • Zupančič, Polona
  • Vanneste, Kris
  • Pires Vilanova, Susana
European Geosciences Union (EGU) General Assembly 2020, 4-8 May 2020, The H2020 Project SERA (WP25-JRA3; http://www.sera-eu.org) is committed to updating and extending the 2013 European Seismic Hazard Model (ESHM13; Woessner et al., 2015, Bull. Earthquake Eng.) to form the basis of the next revision of the European seismic design code (CEN-EC8). Following the probabilistic framework established for ESHM13, the 2020 update (ESHM20) requires a continent-wide seismogenic model based on input from earthquake catalogs, tectonic information, and active faulting. The development of the European Fault-Source Model (EFSM20) fulfills the requirements related to active faulting. EFSM20 has two main categories of seismogenic faults: crustal faults and subduction systems. Crustal faults are meant to provide the hazard model with seismicity rates in a variety of tectonic contexts, including onshore and offshore active plate margins and plate interiors. Subduction systems are meant to provide the hazard model with both slab interface and intraslab seismicity rates. The model covers an area that encompasses a buffer of 300 km around all target European countries (except for Overseas Countries and Territories, OTCs), and a maximum of 300 km depth for slabs. The compilation of EFSM20 relies heavily on publicly available datasets and voluntarily contributed datasets spanning large regions, as well as solicited local contributions in specific areas of interest. The current status of the EFSM20 compilation includes 1,256 records of crustal faults for a total length of ~92,906 km and four subduction systems, namely the Gibraltar Arc, Calabrian Arc, Hellenic Arc, and Cyprus Arc. In this contribution, we present the curation of the main datasets and their associated information, the criteria for the prioritization and harmonization across the region, and the main strategy for transferring the earthquake fault-source input to the hazard modelers. The final version of EFSM20 will be made available through standard web services published in the EFEHR (http://www.efehr.org) and EPOS (https://www.seismofaults.eu) platforms adopting FAIR data principles, The SERA project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No.730900, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hacia una base de datos sísmicos abierta de la Península Ibérica: el repositorio del ICTJA-CSIC, Towards an Open Access seismic database of the Iberian Peninsula: the ICTJA-CSIC repository

  • DeFelipe, Irene
  • Alcalde, Juan
  • Carbonell, Ramón
  • Ivandic, Monika
  • Roberts, R.
X Congreso Geológico de España, 5-7 Julio 2021, Vitoria - Gasteiz, Los experimentos de adquisición de datos de sísmica profunda de fuente controlada han generado un gran volumen de resultados desde los años 50. Estos datos aportan una información muy valiosa sobre la estructura y naturaleza de la corteza y litosfera, constituyendo una herramienta fundamental para la investigación en Ciencias de la Tierra. Además de ser únicos, estos datos han supuesto un elevado coste material e intelectual, por lo que su preservación es indispensable. Por ello, la comunidad científica está promoviendo políticas de datos abiertos siguiendo los principios de gestión de datos `FAIR¿ (encontrables, accesibles, interoperables y reutilizables). Con el fin de promover el uso integrado de datos científicos, la e-infraestructura `European Plate Observation System¿ (EPOS) y el proyecto `Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe¿ (SERA) tienen como objetivo desarrollar un plan a largo plazo para la gestión de datos sísmicos profundos (Atakan et al., 2019). Un prototipo de este tipo de base de datos se ha desarrollado entre los servicios de DIGITAL.CSIC y el Instituto de Ciencias de la Tierra `Jaume Almera¿ (https://digital.csic.es/handle/10261/101879). En esta plataforma, los resultados de cada proyecto están almacenados junto con una ficha de metadatos. Estos metadatos incluyen información general de los propios datos, los autores, tiempo y lugar de la adquisición, los organismos financiadores y otros aspectos legales relevantes. La información técnica incluye los parámetros de adquisición, el procesado de los datos y su formato. Con este protocolo se asigna un identificador permanente a los datos, de forma que cada visita o descarga queda registrada y forma parte de las estadísticas de referencia de la base de datos como medida su impacto., Controlled source seismic data acquisition experiments have produced a vast amount of Deep Seismic Sounding data since the late 50’s. These datasets provide critical information on the structure and nature of the crust and the lithosphere, which constitutes a fundamental research tool within Solid Earth Sciences. These datasets are unique and constitute the output of an expensive scientific process, thus demanding their preservation. The research community has pushed forward open access data policies based on the FAIR principles (Findable, Accessible, Interoperable and Reusable). In this respect, a long-term plan has been launched to streamline the integrated use of scientific data resulting in the European Plate Observation System (EPOS) e-infrastructure and the Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA) (Atakan et al., 2019). A prototype of data exchange system has been developed jointly between the DIGITAL.CSIC services and the Institute of Earth Sciences ‘Jaume Almera’ (https://digital.csic.es/handle/10261/101879). Within the platform, each dataset includes the acquired raw data and a metadata file. The metadata provides information of the nature of the data itself, list of authors, the time and location of the experiments, funding agencies and other relevant legal aspects. The technical information includes the acquisition parameters, data processing and format of the data. In the developed storage protocol, a permanent identifier is assigned ensuring that any data, download, or access is accounted for. This information is entered into a statistics referencing database and can also be used as a measure of the impact of the data., Este trabajo está financiado por la Comisión Europea (Grant Agreement no: 676564-EPOS IP, Call H2020-INFRADEV-2014-2015/H2020-INFRADEV-1-2015-1, SERA 730900).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards a Digital Twin of the Earth System: Geo-Soft-CoRe, a Geoscientific Software & Code Repository

  • DeFelipe, Irene
  • Alcalde, Juan
  • Baykiev, Eldar
  • Bernal, Isabel
  • Boonma, Kittiphon
  • Carbonell, Ramón
  • Flude, Stefanie
  • Folch, Arnau
  • Fullea, J.
  • García-Castellanos, Daniel
  • Geyer, Adelina
  • Giralt, Santiago
  • Hernández, Armand
  • Jimenez-Munt, Ivone
  • Kumar, Ajay
  • Llorens, Maria-Gema
  • Martí Molist, Joan
  • Molina Fernández, Cecilia
  • Olivar-Castaño, Andrés
  • Parnell, Andrew
  • Schimmel, Martin
  • Torné, Montserrat
  • Ventosa, Sergio
Systematic Review Registration: https://digital.csic.es/handle/10261/193580, The immense advances in computer power achieved in the last decades have had a significant impact in Earth science, providing valuable research outputs that allow the simulation of complex natural processes and systems, and generating improved forecasts. The development and implementation of innovative geoscientific software is currently evolving towards a sustainable and efficient development by integrating models of different aspects of the Earth system. This will set the foundation for a future digital twin of the Earth. The codification and update of this software require great effort from research groups and therefore, it needs to be preserved for its reuse by future generations of geoscientists. Here, we report on Geo-Soft-CoRe, a Geoscientific Software & Code Repository, hosted at the archive DIGITAL.CSIC. This is an open source, multidisciplinary and multiscale collection of software and code developed to analyze different aspects of the Earth system, encompassing tools to: 1) analyze climate variability; 2) assess hazards, and 3) characterize the structure and dynamics of the solid Earth. Due to the broad range of applications of these software packages, this collection is useful not only for basic research in Earth science, but also for applied research and educational purposes, reducing the gap between the geosciences and the society. By providing each software and code with a permanent identifier (DOI), we ensure its self-sustainability and accomplish the FAIR (Findable, Accessible, Interoperable and Reusable) principles. Therefore, we aim for a more transparent science, transferring knowledge in an easier way to the geoscience community, and encouraging an integrated use of computational infrastructure. Systematic Review Registration: https://digital.csic.es/handle/10261/193580, This research has been funded by the Projects EPOS IP 676564, EPOS SP 871121, SERA 730900, GeoCAM (PGC2018-095154-B-I00, Spanish Government) and the Center of Excellence for Exascale in Solid Earth (ChEESE) under the Grant Agreement 823844. IDF was funded by a FEDER-Junta de Castilla y León Postdoctoral contract (SA0084P20). JA and M-GL are funded by the Spanish Ministry of Science and Innovation through the Juan de la Cierva fellowship (IJC 2018-036074-I and IJC 2018-036826-I, respectively), funded by MCIN/AEI /10.13039/501100011033. AH is grateful for his Ramón y Cajal contract (RYC 2020-029253-I). Additional funding was provided by the Spanish Ministry of Science and Innovation (RTI 2018-095594-B-I00, PGC 2018-095154-B-100) and the Generalitat de Catalunya (AGAUR, 2017SGR1022). AP’s work was supported by: a Science Foundation Ireland Career Development Award (17/CDA/4695); an investigator award (16/IA/4520); a Marine Research Programme funded by the Irish Government, co-financed by the European Regional Development Fund (Grant-Aid Agreement No. PBA/CC/18/01); European Union’s Horizon 2020 research and innovation programme InnoVar under grant agreement No 818144; SFI Centre for Research Training in Foundations of Data Science 18/CRT/6049, and SFI Research Centre awards I-Form 16/RC/3872 and Insight 12/RC/2289_P2. AH and SG thank the Spanish research project PaleoModes (CGL2016-75281-C2-1-R) which provided some of their financial support. JF is supported by an Atracción de Talento senior fellowship (2018-T1/AMB/11493) funded by Comunidad Autonoma de Madrid (Spain), and a project funded by the Spanish Ministry of Science and Innovation (PID2020-114854GB-C22)., Peer reviewed
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Construction of elastic spectra for high damping

  • Conde Conde, Jorge|||0000-0002-5633-1170
  • Benavent Climent, Amadeo|||0000-0002-9406-6726