Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 69
Encontrada(s) 1 página(s)

UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

Designing an efficient clustering strategy for combined Fog-to-Cloud scenarios

  • Asensio, Adrián
  • Masip-Bruin, Xavi
  • Durán Barroso, Ramón José
  • Miguel Jiménez, Ignacio de
  • Ren, Guang-Jie
  • Daijavad, Shahrokh
  • Jukan, Admela
Producción Científica, The evolution of the Internet of Things (IoT) is imposing many distinct challenges, particularly to guarantee both wide and global systems communication, and to ensure an optimal execution of services. To that end, IoT services must make the most out of both cloud and fog computing (turning into combined fog–cloud scenarios), which indeed requires novel and efficient resource management procedures to handle such diversity of resources in a coordinated way. Most of the related works that can be found in the literature focus on resource mapping for service-specific execution in fog–cloud; however, those works assume a control and management architecture already deployed. Interestingly, few works propose algorithms to set that control architecture, necessary to execute the services and effectively implement services and resource mapping. This paper addresses that challenge by solving the problem of optimal clustering of devices located at the edge of the network offering their resources to support fog computing while defining the control and management role of each of them in the architecture, in order to ensure access to management functions in combined fog–cloud​ scenarios. In particular, we set out the Fog–Cloud Clustering (FCC) problem as an optimization problem, which is based on multi-objective optimization, including realistic, novel and stringent constraints; e.g., to improve the architecture’s robustness by means of a device acting as a backup in the cluster. We model the FCC problem as a Mixed Integer Linear Programming (MILP) formulation, for which a lower and an upper bound on the number of required clusters is derived. We also propose a machine learning-based heuristic that provides scalable and near-optimal solutions in realistic scenarios in which, due to the high number of connected devices, solving the MILP formulation is not viable. By means of a simulation study, we demonstrate the effectiveness of the algorithms comparing its results with those of MILP formulation., Spanish Thematic Networks (contracts RED2018-102585-T and TEC2015-71932-REDT), Ministerio de Economía, Industria y Competitividad - Fondo Europeo de Desarrollo Regional (projects RTI2018-094532-B-I00 and TEC2017-84423-C3-1-P), INTERREG V-A España-Portugal (POCTEP) program (project 0677_DISRUPTIVE_2_E).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A Novel and scalable naming strategy for IoT scenarios

  • Gómez Cárdenas, Alejandro|||0000-0002-9379-2697
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Kahvazadeh, Sarang
Fog-to-Cloud (F2C) is a novel paradigm aimed at increasing the benefits brought by the growing Internet-of-Things (IoT) devices population at the edge of the network. F2C is intended to manage the available resources from the core to the edge of the network, allowing services to choose and use either a specific cloud or fog offer or a combination of both. Recognized the key benefits brought by F2C systems, such as low-latency for real-time services, location awareness services, mobility support and the possibility to process data close to where they are generated, research efforts are being made towards the creation of a widely accepted F2C architecture. However, in order to achieve the desired F2C control framework, many open challenges must be solved. In this paper, we address the identity management challenges and propose an Identity Management System (IDMS) that is based on the fragmentation of the network resource IDs.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Virtualizing the Edge: Needs, Opportunities and Trends

  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Otero Calviño, Beatriz|||0000-0002-9194-559X
  • Rodríguez Luna, Eva|||0000-0001-5904-7039
Cloud computing, Fog computing; Virtualization
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Computation task assignment in vehicular fog computing: a learning approach via neighbor advice

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
In the recent years, fog computing has been proposed as a promising paradigm to enhance the performance of latency-critical applications by hosting them within idle computation nodes (Fog Nodes, FNs) at the edge of the network. Such a paradigm has been further extended to the vehicular fog computing (VFC) scenario by leveraging available computing resources offered by modern vehicles, thus allowing them to process different types of computation tasks on behalf of onboard users or nearby vehicles. Within this context, the proper assignment of computation tasks to Vehicular FNs is an important issue that is currently under active research. To address this issue, online learning approaches, where the performances of the Vehicular FNs in terms of task execution delay are learnt via trial and error, are starting to gain in popularity. This is mainly motivated by the inherent uncertainty caused by mobility and fluctuating resource availabilities in VFC environments. However, since the process of learning from scratch in such a dynamic vehicular environment may lead to a degradation in the learning performance, this paper proposes the use of an advising mechanism, where a roadside unit (RSU) who has already learnt the performances of the vehicles within its range, uses its acquired knowledge to provide advice to a neighbor RSU who does not have enough experience allowing it to make efficient assignment decisions on its own. To evaluate this approach, we used realistic vehicular mobility traces to simulate the VFC scenario. The obtained results show that our proposed approach improves the learning performance compared to the case where no advice is leveraged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Towards a resilient control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Sánchez López, Sergio|||0000-0002-3922-2298
  • Jurnet Bolarin, Alejandro|||0000-0003-2553-5338
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Jukan, Admela
  • Ren, Guang-Jie
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The capacity to efficiently manage the whole set of resources from the edge up to the cloud paves the way to a new landscape of innovative opportunities for all involved actors, be it on the research or industrial sides. Fog-to-Cloud (F2C) has been recently proposed as a management solution particularly tailored to manage the stack of resources from the edge up to the cloud in a coordinated way. However, beyond the benefits brought by considering all the spectrum of resources to run a service, resilience, as a concept must be reflected in the F2C design. In this paper, we address a particular scenario where a specific node failure in the F2C architecture will substantially impact on the whole system performance, and analyse three tentative strategies to efficiently manage such scenario., This work was partially supported by the H2020 mF2C project 730929 and for the UPC authors also by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund, under contract RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Securing combined Fog-to-Cloud systems: challenges and directions

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Gómez Cárdenas, Alejandro|||0000-0002-9379-2697
Nowadays, fog computing is emerged for providing computational power closer to the users. Fog computing brings real-time processing, lowlatency, geo-distributed and etc. Although, fog computing do not come to compete cloud computing, it comes to collaborate. Recently, Fog-To-Cloud (F2C) continuum system is introduced to provide hierarchical computing system and facilitates fog-cloud collaboration. This F2C continuum system might encounter security issues and challenges due to their hierarchical and distributed nature. In this paper, we analyze attacks in different layer of F2C system and identify most potential security requirements and challenges for the F2C continuum system. Finally, we introduce the most remarkable efforts and trends for bringing secure F2C system., This work is supported by the H2020 projects mF2C (730929). It is also supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund both under contract RTI2018-094532-B-100., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A resource identity management strategy for combined fog-to-cloud systems

  • Gómez Cárdenas, Alejandro|||0000-0002-9379-2697
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Kahvazadeh, Sarang
  • García Almiñana, Jordi|||0000-0002-3515-7150
Fog-to-Cloud (F2C) is an emerging architecture intended to manage the resources continuum from far datacenters up to the near edge, putting together the cloud and fog concepts. It aims to obtain both, an efficient utilization of the entire set of available resources and an optimal execution of highly demanding services, supported by the deployment of highly skilled IoT devices at the edge. Many research efforts are pushing for the creation of a widely accepted F2C framework architecture aimed at controlling and managing the resources integrating the F2C network in a hierarchical and distributed fashion. To that end however, many research challenges remain unsolved. This paper puts the focus on one of these challenges, particularly the identity management and proposes a novel strategy that, based on fragmenting the full resource identifier, uses portions of the full resource name to identify the resources in the network without losing the uniqueness property. The presented results show that by using fragments instead of the full identifier, the lookup time and database size in the F2C aggregator nodes are both notably reduced, what undoubtedly enables a fast resource identification.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Deploying fog-to-cloud towards a security architecture for critical infrastructure scenarios

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marcer Albareda, Pau
  • Marín Tordera, Eva|||0000-0002-2039-8277
Critical infrastructures are bringing security, and safety for people in terms of healthcare, water, electricity, industry, transportation, etc. The huge amount of data produced by CIs need to be aggregated, filtered, and stored. Cloud computing was merged into the CIs for utilizing cloud data centers as a pay-as-you-go online computing system for outsourcing services for data storage, filtering and aggregating. On the other hand, CIs need real-time processing for providing sophisticated services to people. Consequently, fog computing is merged into CIs aimed at providing services closer to the users, turning into a smooth real-time decision making and processing. When considering both, that is fog and cloud (for example, deploying the recently coined hierarchical fog-to-cloud F2C concept), new enriched features may be applied to the CIs. Security in CIs is one of the most essential challenges since any failure or attack can turn into a national wise disaster. Moreover, CIs also need to support quality of service (QoS) guarantees for users. Thus, bringing balanced QoS vs security is one of the main challenges for any CI infrastructure. In this paper, we illustrate the benefits of deploying an F2C system in CIs, particularly identifying specific F2C security requirements to be applied to CIs. Finally, we also introduce a decoupled security architecture specifically tailored to CIs that can bring security with reasonable QoS in terms of authentication and key distribution time delay., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Essentiality of managing the resource information in the coordinated fog-to-cloud paradigm

  • Sengupta, Souvik|||0000-0002-0056-1540
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
This is the peer reviewed version of the following article: Sengupta, S, Garcia, J, Masip‐Bruin, X. Essentiality of managing the resource information in the coordinated fog‐to‐cloud paradigm. Int J Commun Syst. 2019, which has been published in final form at https://doi.org/10.1002/dac.4286. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Fog-to-cloud (F2C) computing is an emerging computational platform. By combing the cloud, fog, and IoT, it provides an excellent framework for managing and coordinating the resources in any smart computing domain. Efficient management of these kinds of diverse resources is one of the critical tasks in the F2C system. Also, it must be considered that different types of services are offered by any smart system. So, before managing these resources and enabling the various types of services, it is essential to have some comprehensive informational catalogue of resources and services. Hence, after identifying the resource and service-task taxonomy, our main aim in this paper is finding out a solution for properly organizing this information over the F2C system. For that purpose, we are proposing a modified F2C framework where all the information is distributively stored near to the edge of the network. Finally, by presenting some experimental results, we evaluate and validate the performance of our proposing framework., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and by the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00 and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SFDDM: a secure distributed database management in combined fog-to-cloud systems

  • Sengupta, Souvik|||0000-0002-0056-1540
  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • García Almiñana, Jordi|||0000-0002-3515-7150
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Technological revolutions have greatly increased the use of IoT devices for our daily life. Driving the fact that everything surrounding us is getting connected what turns into an unstoppable increase in the amount of data produced. This data represents the state of diverse environmental events and helps to control a large set of distinct activities. So, accurate and secure management of this data is essential for any computing platform. Moreover, in order to provide real-time services in a distributed system (i.e., smart city), the data should be properly and securely managed. It is well known that shifting these tasks to the edge (i.e., near to the end users), highly facilitates these two objectives. The recently proposed Fog-to-Cloud (F2C) model is intended to enable data processing near to the edge, which helps to get better latency-sensitive services. However, some challenges remain to accurately and securely manage this data over the system, mainly due to the distributed F2C nature. Thus, considering these facts and challenges, in this paper we propose an architectural solution aimed at building a secure distributed database for F2C systems. Then, considering a real-case scenario, we perform some tests to measure the performance of our proposing schema. Finally, by comparing the performance between traditional cloud, fog/edge based execution model and our proposing SFDDM, we validate the effectiveness of our proposing schema., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Fog-to-Cloud computing for farming: low-cost technologies, data exchange, and animal welfare

  • Jukan, Admela
  • Carpio, Francisco
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Juan Ferrer, Ana
  • Kemper, Nicole
  • Stetina, Birgit U.
Coordinated fog-to-cloud computing systems are expected to expedite the evolution of cloud-based smart farming, towards openness and data sharing, while making farming economically sustainable for smaller farms. We demonstrate a fog-to-cloud enabled animal farming system that not only deploys low-cost technology for data collection and sharing, but also uniquely considers animal welfare and quality-of-life. On an practical example of a multi-master replication of SQL Server databases between Microsoft Azure Cloud and multiple fog nodes on the farm, we show that fog-based systems can help improve performance, scale to higher amounts of database entries, pre-process data with aid of machine learning, while providing reliability of the system in an easy-to-use fashion. Considerations of animal welfare, cloud-based data analysis, fog-enabled farming along with mobile applications are envisioned as common place for future farmers and consumers alike, and are in line with a recent trends connecting animal welfare, human health and the environment., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Towards an efficient key management and authentication strategy for combined fog-to-cloud continuum systems

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Diaz, Rodrigo
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Jurnet Bolarin, Alejandro|||0000-0003-2553-5338
  • García Almiñana, Jordi|||0000-0002-3515-7150
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Fog-to-cloud systems have emerged as a novel concept intended to improve service performance by considering fog and cloud resources in a coordinated way. In such a heterogeneous scenario, security provisioning becomes necessary, hence novel security solutions must be designed to handle the highly distributed fog-to-cloud nature. In the security area, key distribution and authentication are referred to as two critical pillars for a successful security deployment. Unfortunately, traditional centralized key distribution and authentication approaches do not meet the particularities brought by a Fog-tocloud system due to its distributed nature. In this paper, we propose a novel distributed key management and authentication (DKMA) strategy to make Fog-to-cloud systems as secure as possible. The paper ends up presenting some results assessing the benefits of the proposed strategy in terms of traffic and delay reduction., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Taxonomy and resource modeling in combined fog-to-cloud systems

  • Sengupta, Souvik|||0000-0002-0056-1540
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
As the technology is rapidly evolving, the society as a whole is gradually surrounding by the Internet. In such a high connectivity scenario, the recently coined IoT concept becomes a commodity driving data generation rate to increase swiftly. To process and manage these data in an efficient way, a new strategy, referred to as Fog-to-Clod (F2C), has been recently proposed leveraging two existing technologies, fog computing and cloud computing, where resources are playing a pivotal role to manage data efficiently. In these scenarios, vast numbers of interconnected heterogeneous devices coexist, thus crafting a complex set of devices. Managing efficiently these devices requires a proper resources classification and organization. In this paper, we offer a model to classify and taxonomies the whole set of resources aimed to best suit the Fog-to-Cloud (F2C) paradigm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Managing resources continuity from the edge to the cloud: Architecture and performance

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Jukan, Admela
  • Ren, Guang-Jie
The wide spread deployment of smart edge devices and applications that require real-time data processing, have with no doubt created the need to extend the reach of cloud computing to the edge, recently also referred to as Fog or Edge Computing. Fog computing implements the idea of extending the cloud where the
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An Architecture for Programming Distributed Applications on Fog to Cloud Systems

  • Lordan Gomis, Francesc-Josep
  • Lezzi, Daniele|||0000-0001-5081-7244
  • Ejarque, Jorge|||0000-0003-4725-5097
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
This paper presents a framework to develop and execute applications in distributed and highly dynamic computing systems composed of cloud resources and fog devices such as mobile phones, cloudlets, and micro-clouds. The work builds on the COMPSs programming framework, which includes a programming model and a runtime already validated in HPC and cloud environments for the transparent execution of parallel applications. As part of the proposed contribution, COMPSs has been enhanced to support the execution of applications on mobile platforms that offer GPUs and CPUs. The scheduling component of COMPSs is under design to be able to offload the computation to other fog devices in the same level of the hierarchy and to cloud resources when more computational power is required. The framework has been tested executing a sample application on a mobile phone offloading task to a laptop and a private cloud., This work is partly supported by the Spanish Ministry of Science and Technology through project TIN2015-65316-P and grant BES-2013-067167, by the Generalitat de Catalunya under contracts 2014-SGR-1051 and 2014-SGR-1272, and by the European Union through the Horizon 2020 research and innovation programme under grant 730929 (mF2C Project)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

mF2C: Towards a coordinated management of the IoT-fof-cloud continuum

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Juan Ferrer, Ana
  • Queralt Calafat, Anna|||0000-0003-2782-2955
  • Jukan, Admela
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Lezzi, Daniele|||0000-0001-5081-7244
  • Jensen, Jens
  • Cordeiro, Cristovao
  • Leckey, Alexander
  • Salis, Antonio
  • Guilhot, Denis
  • Cankar, Matic
Fog computing enables location dependent resource allocation and low latency services, while fostering novel market and business opportunities in the cloud sector. Aligned to this trend, we refer to Fog-tocloud (F2C) computing system as a new pool of resources, set into a layered and hierarchical model, intended to ease the entire fog and cloud resources management and coordination. The H2020 project mF2C aims at designing, developing and testing a first attempt for a real F2C architecture. This document outlines the architecture and main functionalities of the management framework designed in the mF2C project to coordinate the execution of services in the envisioned set of heterogeneous anddistributed resources.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A multidimensional control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Souza, Vitor Barbosa
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Ren, Guang-Jie
  • Jukan, Admela
  • García Almiñana, Jordi|||0000-0002-3515-7150
The fog/edge computing concept has set the foundations for the deployment of new services leveraging resources deployed at the edge paving the way for an innovative collaborative model, where end-users may collaborate with service providers by sharing idle resources at the edge of the network. Combined Fog-to-Cloud (F2C) systems have been recently proposed as a control strategy for managing fog and cloud resources in a coordinated way, aimed at optimally allocating resources within the fog-to-cloud resources stack for an optimal service execution. In this work, we discuss the unfeasibility of the deployment of a single control topology able to optimally manage a plethora of edge devices in future networks, respecting established SLAs according to distinct service requirements and end-user profiles. Instead, a multidimensional architecture, where distinct control plane instances coexist, is then introduced. By means of distinct scenarios, we describe the benefits of the proposed architecture including how users may collaborate with the deployment of novel services by selectively sharing resources according to their profile, as well as how distinct service providers may benefit from shared resources reducing deployment costs. The novel architecture proposed in this paper opens several opportunities for research, which are presented and discussed at the final section., This work was supported by the H2020 EU mF2C project, ref. 730929 and for UPC authors, also by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under contract RTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Towards a proper service placement in combined Fog-to-Cloud (F2C) architectures

  • Souza, Vitor Barbosa
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Sánchez López, Sergio|||0000-0002-3922-2298
  • García Almiñana, Jordi|||0000-0002-3515-7150
The Internet of Things (IoT) has empowered the development of a plethora of new services, fueled by the deployment of devices located at the edge, providing multiple capabilities in terms of connectivity as well as in data collection and processing. With the inception of the Fog Computing paradigm, aimed at diminishing the distance between edge-devices and the IT premises running IoT services, the perceived service latency and even the security risks can be reduced, while simultaneously optimizing the network usage. When put together, Fog and Cloud computing (recently coined as fog-to-cloud, F2C) can be used to maximize the advantages of future computer systems, with the whole greater than the sum of individual parts. However, the specifics associated with cloud and fog resource models require new strategies to manage the mapping of novel IoT services into the suitable resources. Despite few proposals for service offloading between fog and cloud systems are slowly gaining momentum in the research community, many issues in service placement, both when the service is ready to be executed admitted as well as when the service is offloaded from Cloud to Fog, and vice-versa, are new and largely unsolved. In this paper, we provide some insights into the relevant features about service placement in F2C scenarios, highlighting main challenges in current systems towards the deployment of the next-generation IoT services
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A survey of communication protocols for internet of things and related challenges of fog and cloud computing integration

  • Dizdarevic, Jasenka
  • Carpio, Francisco
  • Jukan, Admela
  • Masip Bruin, Xavier|||0000-0002-4755-556X
The fast increment in the number of IoT (Internet of Things) devices is accelerating the research on new solutions to make cloud services scalable. In this context, the novel concept of fog computing as well as the combined fog-to-cloud computing paradigm is becoming essential to decentralize the cloud, while bringing the services closer to the end-system. This article surveys e application layer communication protocols to fulfill the IoT communication requirements, and their potential for implementation in fog- and cloud-based IoT systems. To this end, the article first briefly presents potential protocol candidates, including request-reply and publish-subscribe protocols. After that, the article surveys these protocols based on their main characteristics, as well as the main performance issues, including latency, energy consumption, and network throughput. These findings are thereafter used to place the protocols in each segment of the system (IoT, fog, cloud), and thus opens up the discussion on their choice, interoperability, and wider system integration. The survey is expected to be useful to system architects and protocol designers when choosing the communication protocols in an integrated IoT-to-fog-to-cloud system architecture., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An architectural schema for performance prediction using machine learning in the fog-to-cloud paradigm

  • Sengupta, Souvik|||0000-0002-0056-1540
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Prieto González, Andrés
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Fog-to-Cloud (F2C) paradigm is emerging to both provide higher functional efficiency for latency-sensitive services and also help modern computing systems to be more intelligent. As it is still in its infancy, the biggest challenge for this domain is to build a proper resource allocation technique as part of an efficient resource management module. The diversified and distributed nature of that paradigm creates some additional hurdles for choosing the appropriate resources for executing some tasks. Significantly, efficient resource consumption estimation and performance forecasting are core issues in the design and development of a proper and smart resource management mechanism for F2C systems. Considering this fact, in this paper, we aim at designing an architectural framework for a prediction-based resource management mechanism for F2C systems. The performance prediction is based on supervised machine learning technology. The proposal has been evaluated and validated by predicting the performance and resources usage of F2C resources through several tests. Primarily, we have run an image recognition application on different F2C resources and collected performance-related information and resource consumption information. Then, by adopting the multivariate regression methodology, we perform some standard machine learning techniques to predict the performance and estimate the resource consumption of the F2C resources. Finally, to justify the effectiveness of our proposal, we calculated the value of a cost function between estimated values and the real measured values., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A Beacon-assisted direction-aware scanning scheme for 802.11-based discovery in Fog-to-Cloud systems

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
In order to fully leverage idle computational resources in a fog computing scenario, a suitable discovery mechanism is needed. Within this context, F2C-Aware has been proposed in a previous work as a discovery solution where a device can detect nearby fog resources by scanning for custom 802.11 beacons being broadcast by those resources. Since mobility is an inherent characteristic in fog computing, keeping the Wi-Fi-based discovery service always on during mobility will lead to unnecessary scans being performed in non-covered areas, causing energy consumption penalties. That is why, in this paper, we propose a Beacon-assisted Direction-aware Scanning Scheme (BDSS), where we use the discovery beacon to convey the distance remaining until a next fog will be reached in each of the four cardinal directions along with the channel used for beacon advertisements. Therefore, the scan will be disabled until the next fog is reached. Emulation results show that by using this scheme, considerable energy savings could be made while maintaining a high discovery rate., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A user-centric mobility management scheme for high-density fog computing deployments

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The inherent mobility characterizing users in fog computing environments along with the limited wireless range of their serving fog nodes (FNs) drives the need for designing efficient mobility management (MM) mechanisms. This ensures that users' resource-intensive tasks are always served by the most suitable FNs in their vicinity. However, since MM decisionmaking requires control information which is difficult to predict accurately a-priori, such as the users' mobility patterns and the dynamics of the FNs, researchers have started to shift their attention towards MM solutions based on online learning. Motivated by this approach, in this paper, we consider a bandit learning model to address the mobility-induced FN selection problem, with a particular focus on scenarios with a high FN density. Following this approach, a software agent implemented within the user's device learns the FNs' delay performances via trial and error, by sending them the user's computation tasks and observing the perceived delay, with the goal of minimizing the accumulated delay. This task is particularly challenging when considering a high FN density, since the number of unknown FNs that need to be explored is high, while the time that can be spent on learning their performances is limited, given the user's mobility. Therefore, to address this issue, we propose to limit the number of explorations to a small subset of the FNs. As a result, the user can still have time to be served by the FN that was found to yield the lowest delay performance. Using real world mobility traces and task generation patterns, we found that it pays off to limit the number of explorations in high FN density scenarios. This is shown through significant improvements in the cumulative regret as well as the instantaneous delay, compared to the case where all newly-appeared FNs are explored., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Benefits of a Fog-to-Cloud Approach in Proximity Marketing

  • Salis, Antonio
  • Mancini, Glauco
  • Bulla, Roberto
  • Cocco, Paolo
  • Lezzi, Daniele|||0000-0001-5081-7244
  • Lordan, Francesc
The EC H2020 mF2C Project is working to the development of a software framework that enables the orchestration of resources and communication at fog level, as an extension of cloud computing and interacting with the IoT. In order to show the project functionalities and added-values three real world use cases have been chosen. This paper introduces one of the mF2C use cases: Smart Fog Hub Service (SFHS) use case, in the context of an airport, with the objective of proving that the adoption of the fog-to-cloud approach brings relevant benefits in terms of performance and optimization of resource usage, thus giving an objective evidence of the impact of the mF2C framework., This work is supported by the H2020 mF2C project (730929), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Managing the cloud continuum: lessons learnt from a real fog-to-cloud deployment

  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Sánchez López, Sergio|||0000-0002-3922-2298
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Jukan, Admela
  • Juan Ferrer, Ana
  • Queralt Calafat, Anna|||0000-0003-2782-2955
  • Salis, Antonio
  • Bartoli, Andrea
  • Cankar, Matija
  • Cordeiro, Cristovao
  • Jensen, Jens
  • Kennedy, John D.
The wide adoption of the recently coined fog and edge computing paradigms alongsideconventional cloud computing creates a novel scenario, known as the cloud continuum, whereservices may benefit from the overall set of resources to optimize their execution. To operatesuccessfully, such a cloud continuum scenario demands for novel management strategies, enablinga coordinated and efficient management of the entire set of resources, from the edge up to thecloud, designed in particular to address key edge characteristics, such as mobility, heterogeneity andvolatility. The design of such a management framework poses many research challenges and hasalready promoted many initiatives worldwide at different levels. In this paper we present the resultsof one of these experiences driven by an EU H2020 project, focusing on the lessons learnt from a realdeployment of the proposed management solution in three different industrial scenarios. We thinkthat such a description may help understand the benefits brought in by a holistic cloud continuummanagement and also may help other initiatives in their design and development processes., This research was funded by H2020 mF2C Project, grant number 730929, and for UPCauthors by the Spanish Ministry of Science, Innovation and Universities and FEDER, grant numberRTI2018-094532-B-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A survey on mobility-induced service migration in the fog, edge, and related computing paradigms

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
The final publication is available at ACM via http://dx.doi.org/10.1145/3326540, With the advent of fog and edge computing paradigms, computation capabilities have been moved toward the edge of the network to support the requirements of highly demanding services. To ensure that the quality of such services is still met in the event of users’ mobility, migrating services across different computing nodes becomes essential. Several studies have emerged recently to address service migration in different edge-centric research areas, including fog computing, multi-access edge computing (MEC), cloudlets, and vehicular clouds. Since existing surveys in this area focus on either VM migration in general or migration in a single research field (e.g., MEC), the objective of this survey is to bring together studies from different, yet related, edge-centric research fields while capturing the different facets they addressed. More specifically, we examine the diversity characterizing the landscape of migration scenarios at the edge, present an objective-driven taxonomy of the literature, and highlight contributions that rather focused on architectural design and implementation. Finally, we identify a list of gaps and research opportunities based on the observation of the current state of the literature. One such opportunity lies in joining efforts from both networking and computing research communities to facilitate future research in this area., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Proactive vs reactive failure recovery assessment in combined fog-to-cloud (F2C) systems

  • Souza, Vitor Barbosa
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Ramirez Almonte, Wilson
  • Sánchez López, Sergio|||0000-0002-3922-2298
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The increasing number of end user devices at the edge of the network, along with their ever increasing computing capacity, as well as the advances in Data Center technologies, paved the way for the generation of Internet of Things (IoT). Several IoT services have been deployed leveraging Cloud Computing and, more recently, Fog Computing. In order to enable efficient control of cloud and fog premises, Fog-to-Cloud (F2C) has been recently proposed as a distributed architecture for coordinated management of both fog and cloud resources. Certainly, many challenges remain unsolved in combined Fog-to-Cloud systems, mostly driven by the dynamicity and volatility imposed by edge devices, such as the recovery of failures at the edge of the network. Indeed, possible failures in computing commodities may be prohibitive for the achievement of the envisioned performance in F2C systems. In this work, we assess proactive and reactive strategies for failure recovery of network elements by modelling them as a Multidimensional Knapsack Problem (MKP) and study the impact of each one on several aspects such as service allocation time, recovery delay and computing resources load. The obtained results show the effect each strategy brings, thus concluding with some analysis on the recovery strategy best suiting distinct IoT scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A programming model for hybrid workflows: combining task-based workflows and dataflows all-in-one

  • Ramón Cortés, Cristian|||0000-0003-4170-818X
  • Lordan Gomis, Francesc|||0000-0002-9845-8890
  • Ejarque Artigas, Jorge
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
In the past years, e-Science applications have evolved from large-scale simulations executed in a single cluster to more complex workflows where these simulations are combined with High-Performance Data Analytics (HPDA). To implement these workflows, developers are currently using different patterns; mainly task-based and dataflow. However, since these patterns are usually managed by separated frameworks, the implementation of these applications requires to combine them; considerably increasing the effort for learning, deploying, and integrating applications in the different frameworks. This paper tries to reduce this effort by proposing a way to extend task-based management systems to support continuous input and output data to enable the combination of task-based workflows and dataflows (Hybrid Workflows from now on) using a single programming model. Hence, developers can build complex Data Science workflows with different approaches depending on the requirements. To illustrate the capabilities of Hybrid Workflows, we have built a Distributed Stream Library and a fully functional prototype extending COMPSs, a mature, general-purpose, task-based, parallel programming model. The library can be easily integrated with existing task-based frameworks to provide support for dataflows. Also, it provides a homogeneous, generic, and simple representation of object and file streams in both Java and Python; enabling complex workflows to handle any data type without dealing directly with the streaming back-end. During the evaluation, we introduce four use cases to illustrate the new capabilities of Hybrid Workflows; measuring the performance benefits when processing data continuously as it is generated, when removing synchronisation points, when processing external real-time data, and when combining task-based workflows and dataflows at different levels. The users identifying these patterns in their workflows may use the presented uses cases (and their performance improvements) as a reference to update their code and benefit of the capabilities of Hybrid Workflows. Furthermore, we analyse the scalability in terms of the number of writers and readers and measure the task analysis, task scheduling, and task execution times when using objects or streams., This work has been supported by the Spanish Government (contracts SEV2015-0493 and TIN2015-65316-P), by Generalitat de Catalunya (contract 2014-SGR-1051), and by the European Commission through the Horizon 2020 Research and Innovation program under contract 730929 (MF2C project). Cristian Ramon-Cortes predoctoral contract is financed by the Spanish Government under the contract BES-2016-076791., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Analyzing the deployment challenges of beacon stuffing as a discovery enabler in Fog-to-Cloud systems

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
In order to meet the needs of emerging IoT applications having tight QoS constraints, new computing paradigms have been proposed, bringing computation resources closer to the edge of the network, where IoT resides. One of such paradigms is Fog-to-Cloud (F2C), defined as a framework where the combined use of fog and cloud resources is coordinated and managed in an optimized manner to achieve the desired service requirements. Unlike cloud computing, the fog provides a heterogeneous set of resources, possibly within fixed deployments provided by city managers, or that could even be contributed by end users. This brings in many challenges yet to be addressed such as resource discovery, which is the focus of this paper. This paper digs into the utilization of 802.11 beacon stuffing as a possible solution allowing the discovery of nearby devices in an F2C system, particularly dealing with specific design and implementation details of the proposed solution and more importantly its real applicability to an F2C system through the analysis of several experiments carried out on a real world testbed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Towards a context-aware Wi-Fi-based Fog Node discovery scheme using cellular footprints

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
Recently, new computing paradigms such as fog and edge computing started to emerge in an attempt to cope with the low latency requirements of new classes of IoT applications. In order for these paradigms to fully realize their potential, an important challenge to address is the discovery of fog nodes (FNs) with spare computational resources that can be used to host time- sensitive and computationally intensive application components. We particularly focus on this problem in this paper, considering the case of a WiFi-based FN discovery process. More specifically, we evaluate how practical it is to trigger the discovery of fog nodes based on a mobile phone's historical cellular footprints in order to obtain a high discovery rate and a low energy overhead. To this end, we conducted a small-scale cellular data collection to be used to test different learning approaches, including the K-Nearest Neighbors and the decision tree algorithms as well as a Hidden Markov Model (HMM). According to our evaluation results, HMM was found to achieve the maximum discovery and energy saving ratios. The impact of initial FN misdetections on the user-FN contact ratio has also been studied., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

F2C-Aware: enabling discovery in Wi-Fi-powered Fog-to-Cloud (F2C) systems

  • Rejiba, Zeineb
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Jurnet Bolarin, Alejandro|||0000-0003-2553-5338
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Ren, Guang-Jie
Fog-to-Cloud (F2C) is a novel architectural framework, driven by the needs imposed by emerging ubiquitous applications and relying on the coordinated use of fog and cloud computing. Within such a setup, a suitable mechanism addressing the resource discovery problem, taking into account fog-specific characteristics (i.e. mobility, heterogeneity, etc.) is yet to be defined. On the other hand, the proliferation of Wi- Fi has been remarkably growing with inherent support for an interesting feature set. One such feature is to embed vendorspecific information within the beacon frame in order to provide customized Wi-Fi-based informational services. In this paper, we propose F2C-Aware, a discovery approach that leverages this feature to allow devices in Wi-Fi-powered Fog-to-Cloud systems to become aware of each other. The proposed approach takes into account the fact that devices in the fog are not necessarily connected to the same local network and thus it provides discovery prior to network association, which could help in obtaining time and energy savings., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An architecture for resource management in a fog-to-cloud framework

  • Sengupta, Souvik|||0000-0002-0056-1540
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
Fog-to-cloud (F2C) platforms provide an excellent framework for the efficient resource management in the context of smart cities. In such a scenario, a vast number of heterogeneous resources, including computing devices and IoT sensors, are considered in coordination to provide the best facilities. One of the most critical and challenging tasks in this framework is appropriately managing the set of resources available in the smart city. Many devices with different features should be efficiently classified, organized, and selected, to fulfill the requirements during services execution. In this paper, we present the design of an architecture for resource management as part of a core module in an F2C system. In this architecture, we classify both, the system resources and services and, based on the users’ preferences and sharing policies; we discuss the process of resource selection according to a predefined cost model. The cost model could consider any cost dimension, such as performance, energy consumption, or any eventual business model associated with the F2C system., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Essentiality of resource and service-task characterization in the coordinated fog-to-cloud paradigm

  • Sengupta, Souvik|||0000-0002-0056-1540
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Masip Bruin, Xavier|||0000-0002-4755-556X
Fog-to-Cloud (F2C) computing is an emerging computational platform. By combing three existing computing platform layers (i.e., cloud, fog, and IoT), F2C provides an excellent framework for managing and coordinating the various participating resources in a smart environment scenario. Efficient management of these kinds of diverse resources is one of the critical tasks in a F2C system. Also, it must be considered that different types of services are offered by any smart environmental system. So, before managing these diverse resources and providing the various types of services, it is essential to have some catalogue for knowing the characteristics of system resources that matches the different service requirements. Hence, in this paper, our main aim is to understand how resources and service-task characterization helps building a proper resource management schema in a coordinated F2C platform., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaluating the benefits of combined and continuous Fog-to-Cloud architectures

  • Ramirez Almonte, Wilson
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • Souza, Vitor Barbosa
  • Jukan, Admela
  • Ren, Guang-Jie
  • González de Dios, Oscar
The need to extend the features of Cloud computing to the edge of the network has fueled the development of new computing architectures, such as Fog computing. When put together, the combined and continuous use of fog and cloud computing, lays the foundation for a new and highly heterogeneous computing ecosystem, making the most out of both, cloud and fog. Incipient research efforts are devoted to propose a management architecture to properly manage such combination of resources, such as the reference architecture proposed by the OpenFog Consortium or the recent Fog-to-Cloud (F2C). In this paper, we pay attention to such a combined ecosystem and particularly evaluate the potential benefits of F2C in dynamic scenarios, considering computing resources mobility and different traffic patterns. By means of extensive simulations we specifically study the aspects of service response time, network bandwidth occupancy, power consumption and service disruption probability. The results indicate that a combined fog-to-cloud architecture brings significant performance benefits in comparison with the traditional standalone Cloud, e.g., over 50% reduction in terms of power consumption.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Benefits of a coordinated fog-to-cloud resources management strategy on a smart city scenario

  • Bartoli, Andrea
  • Hernández Ramírez, Francisco|||0000-0002-2690-947X
  • Val, Laura
  • Gorchs, Jose
  • Masip Bruin, Xavier|||0000-0002-4755-556X
  • Marín Tordera, Eva|||0000-0002-2039-8277
  • García Almiñana, Jordi|||0000-0002-3515-7150
  • Juan Ferrer, Ana
  • Jukan, Admela
The advent of fog computing devices as computing paradigm enriching traditional cloud computing applications, paves the way to deploy innovative services, typically not completely appropriate and well supported by cloud computing technology. For example, fog computing is highly suitable for services requiring high constraints on delay, such as dependable services in the e-health arena or tracking strategies in manufacturing processes. Recently, some initiatives have focussed on putting together fog and cloud computing to make the best out of utilizing both, such as the reference architecture by the OpenFog consortium or the Fog-to-Cloud (F2C) concept. However, such a scenario requires a novel management strategy taking over the foreseen specific demands. In this paper, we argue the benefits of a F2C architecture on a particular application to be deployed on a smart city or smart environment scenario., This work is supported by the H2020 mF2C project (730929). For UPC authors is also supported by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund under contract TEC2015-66220-R (MINECO/FEDER)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Workflow environments for advanced cyberinfrastructure platforms

  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ejarque Artigas, Jorge
  • Lordan Gomis, Francesc|||0000-0002-9845-8890
  • Lezzi, Daniele|||0000-0001-5081-7244
  • Conejero Bañón, Javier
  • Álvarez Cid-Fuentes, Javier
  • Becerra Fontal, Yolanda|||0000-0003-2357-7796
  • Queralt Calafat, Anna|||0000-0003-2782-2955
Progress in science is deeply bound to the effective use of high-performance computing infrastructures and to the efficient extraction of knowledge from vast amounts of data. Such data comes from different sources that follow a cycle composed of pre-processing steps for data curation and preparation for subsequent computing steps, and later analysis and analytics steps applied to the results. However, scientific workflows are currently fragmented in multiple components, with different processes for computing and data management, and with gaps in the viewpoints of the user profiles involved. Our vision is that future workflow environments and tools for the development of scientific workflows should follow a holistic approach, where both data and computing are integrated in a single flow built on simple, high-level interfaces. The topics of research that we propose involve novel ways to express the workflows that integrate the different data and compute processes, dynamic runtimes to support the execution of the workflows in complex and heterogeneous computing infrastructures in an efficient way, both in terms of performance and energy. These infrastructures include highly distributed resources, from sensors and instruments, and devices in the edge, to High-Performance Computing and Cloud computing resources. This paper presents our vision to develop these workflow environments and also the steps we are currently following to achieve it., This work has been supported by the Spanish Government (SEV2015-0493), by the Spanish Ministry of Science and Innovation (contract TIN2015-65316-P), by Generalitat de Catalunya (contract 2014-SGR-1051). Javier Conejero postdoctoral contract is co-financed by the Ministry of Economy and Competitiveness under Juan de la Cierva Formacion´ postdoctoral fellowship number FJCI-2015-24651. This work is supported by the H2020 mF2C project (730929) and the CLASS project (780622). The participation of Rosa M Badia in the BDEC2 meetings is supported by the EXDCI project (800957). The dislib library developments are partially funded under the project agreement between BSC and FUJITSU., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Managing the cloud continuum: lessons learnt from a real fog-to-cloud deployment

  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Sánchez López, Sergio
  • García Almiñana, Jordi
  • Jukan, Admela
  • Juan Ferrer, Ana
  • Queralt Calafat, Anna
  • Salis, Antonio
  • Bartoli, Andrea
  • Cankar, Matija
  • Cordeiro, Cristovao
  • Jensen, Jens
  • Kennedy, John D.
The wide adoption of the recently coined fog and edge computing paradigms alongsideconventional cloud computing creates a novel scenario, known as the cloud continuum, whereservices may benefit from the overall set of resources to optimize their execution. To operatesuccessfully, such a cloud continuum scenario demands for novel management strategies, enablinga coordinated and efficient management of the entire set of resources, from the edge up to thecloud, designed in particular to address key edge characteristics, such as mobility, heterogeneity andvolatility. The design of such a management framework poses many research challenges and hasalready promoted many initiatives worldwide at different levels. In this paper we present the resultsof one of these experiences driven by an EU H2020 project, focusing on the lessons learnt from a realdeployment of the proposed management solution in three different industrial scenarios. We thinkthat such a description may help understand the benefits brought in by a holistic cloud continuummanagement and also may help other initiatives in their design and development processes., This research was funded by H2020 mF2C Project, grant number 730929, and for UPCauthors by the Spanish Ministry of Science, Innovation and Universities and FEDER, grant numberRTI2018-094532-B-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fog-to-Cloud computing for farming: low-cost technologies, data exchange, and animal welfare

  • Jukan, Admela
  • Carpio, Francisco
  • Masip Bruin, Xavier
  • Juan Ferrer, Ana
  • Kemper, Nicole
  • Stetina, Birgit U.
Coordinated fog-to-cloud computing systems are expected to expedite the evolution of cloud-based smart farming, towards openness and data sharing, while making farming economically sustainable for smaller farms. We demonstrate a fog-to-cloud enabled animal farming system that not only deploys low-cost technology for data collection and sharing, but also uniquely considers animal welfare and quality-of-life. On an practical example of a multi-master replication of SQL Server databases between Microsoft Azure Cloud and multiple fog nodes on the farm, we show that fog-based systems can help improve performance, scale to higher amounts of database entries, pre-process data with aid of machine learning, while providing reliability of the system in an easy-to-use fashion. Considerations of animal welfare, cloud-based data analysis, fog-enabled farming along with mobile applications are envisioned as common place for future farmers and consumers alike, and are in line with a recent trends connecting animal welfare, human health and the environment., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An architectural schema for performance prediction using machine learning in the fog-to-cloud paradigm

  • Sengupta, Souvik
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
  • Prieto González, Andrés
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Fog-to-Cloud (F2C) paradigm is emerging to both provide higher functional efficiency for latency-sensitive services and also help modern computing systems to be more intelligent. As it is still in its infancy, the biggest challenge for this domain is to build a proper resource allocation technique as part of an efficient resource management module. The diversified and distributed nature of that paradigm creates some additional hurdles for choosing the appropriate resources for executing some tasks. Significantly, efficient resource consumption estimation and performance forecasting are core issues in the design and development of a proper and smart resource management mechanism for F2C systems. Considering this fact, in this paper, we aim at designing an architectural framework for a prediction-based resource management mechanism for F2C systems. The performance prediction is based on supervised machine learning technology. The proposal has been evaluated and validated by predicting the performance and resources usage of F2C resources through several tests. Primarily, we have run an image recognition application on different F2C resources and collected performance-related information and resource consumption information. Then, by adopting the multivariate regression methodology, we perform some standard machine learning techniques to predict the performance and estimate the resource consumption of the F2C resources. Finally, to justify the effectiveness of our proposal, we calculated the value of a cost function between estimated values and the real measured values., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SFDDM: a secure distributed database management in combined fog-to-cloud systems

  • Sengupta, Souvik
  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • García Almiñana, Jordi
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Technological revolutions have greatly increased the use of IoT devices for our daily life. Driving the fact that everything surrounding us is getting connected what turns into an unstoppable increase in the amount of data produced. This data represents the state of diverse environmental events and helps to control a large set of distinct activities. So, accurate and secure management of this data is essential for any computing platform. Moreover, in order to provide real-time services in a distributed system (i.e., smart city), the data should be properly and securely managed. It is well known that shifting these tasks to the edge (i.e., near to the end users), highly facilitates these two objectives. The recently proposed Fog-to-Cloud (F2C) model is intended to enable data processing near to the edge, which helps to get better latency-sensitive services. However, some challenges remain to accurately and securely manage this data over the system, mainly due to the distributed F2C nature. Thus, considering these facts and challenges, in this paper we propose an architectural solution aimed at building a secure distributed database for F2C systems. Then, considering a real-case scenario, we perform some tests to measure the performance of our proposing schema. Finally, by comparing the performance between traditional cloud, fog/edge based execution model and our proposing SFDDM, we validate the effectiveness of our proposing schema., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018- 094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluating the benefits of combined and continuous Fog-to-Cloud architectures

  • Ramirez Almonte, Wilson
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Souza, Vitor Barbosa
  • Jukan, Admela
  • Ren, Guang-Jie
  • González de Dios, Oscar
The need to extend the features of Cloud computing to the edge of the network has fueled the development of new computing architectures, such as Fog computing. When put together, the combined and continuous use of fog and cloud computing, lays the foundation for a new and highly heterogeneous computing ecosystem, making the most out of both, cloud and fog. Incipient research efforts are devoted to propose a management architecture to properly manage such combination of resources, such as the reference architecture proposed by the OpenFog Consortium or the recent Fog-to-Cloud (F2C). In this paper, we pay attention to such a combined ecosystem and particularly evaluate the potential benefits of F2C in dynamic scenarios, considering computing resources mobility and different traffic patterns. By means of extensive simulations we specifically study the aspects of service response time, network bandwidth occupancy, power consumption and service disruption probability. The results indicate that a combined fog-to-cloud architecture brings significant performance benefits in comparison with the traditional standalone Cloud, e.g., over 50% reduction in terms of power consumption., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Virtualizing the Edge: Needs, Opportunities and Trends

  • Marín Tordera, Eva
  • Masip Bruin, Xavier
  • Otero Calviño, Beatriz
  • Rodríguez Luna, Eva
Cloud computing, Fog computing; Virtualization, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Essentiality of managing the resource information in the coordinated fog-to-cloud paradigm

  • Sengupta, Souvik
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
This is the peer reviewed version of the following article: Sengupta, S, Garcia, J, Masip‐Bruin, X. Essentiality of managing the resource information in the coordinated fog‐to‐cloud paradigm. Int J Commun Syst. 2019, which has been published in final form at https://doi.org/10.1002/dac.4286. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Fog-to-cloud (F2C) computing is an emerging computational platform. By combing the cloud, fog, and IoT, it provides an excellent framework for managing and coordinating the resources in any smart computing domain. Efficient management of these kinds of diverse resources is one of the critical tasks in the F2C system. Also, it must be considered that different types of services are offered by any smart system. So, before managing these resources and enabling the various types of services, it is essential to have some comprehensive informational catalogue of resources and services. Hence, after identifying the resource and service-task taxonomy, our main aim in this paper is finding out a solution for properly organizing this information over the F2C system. For that purpose, we are proposing a modified F2C framework where all the information is distributively stored near to the edge of the network. Finally, by presenting some experimental results, we evaluate and validate the performance of our proposing framework., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and by the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00 and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A resource identity management strategy for combined fog-to-cloud systems

  • Gómez Cárdenas, Alejandro
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Kahvazadeh, Sarang
  • García Almiñana, Jordi
Fog-to-Cloud (F2C) is an emerging architecture intended to manage the resources continuum from far datacenters up to the near edge, putting together the cloud and fog concepts. It aims to obtain both, an efficient utilization of the entire set of available resources and an optimal execution of highly demanding services, supported by the deployment of highly skilled IoT devices at the edge. Many research efforts are pushing for the creation of a widely accepted F2C framework architecture aimed at controlling and managing the resources integrating the F2C network in a hierarchical and distributed fashion. To that end however, many research challenges remain unsolved. This paper puts the focus on one of these challenges, particularly the identity management and proposes a novel strategy that, based on fragmenting the full resource identifier, uses portions of the full resource name to identify the resources in the network without losing the uniqueness property. The presented results show that by using fragments instead of the full identifier, the lookup time and database size in the F2C aggregator nodes are both notably reduced, what undoubtedly enables a fast resource identification., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Essentiality of resource and service-task characterization in the coordinated fog-to-cloud paradigm

  • Sengupta, Souvik
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
Fog-to-Cloud (F2C) computing is an emerging computational platform. By combing three existing computing platform layers (i.e., cloud, fog, and IoT), F2C provides an excellent framework for managing and coordinating the various participating resources in a smart environment scenario. Efficient management of these kinds of diverse resources is one of the critical tasks in a F2C system. Also, it must be considered that different types of services are offered by any smart environmental system. So, before managing these diverse resources and providing the various types of services, it is essential to have some catalogue for knowing the characteristics of system resources that matches the different service requirements. Hence, in this paper, our main aim is to understand how resources and service-task characterization helps building a proper resource management schema in a coordinated F2C platform., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A survey on mobility-induced service migration in the fog, edge, and related computing paradigms

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
The final publication is available at ACM via http://dx.doi.org/10.1145/3326540, With the advent of fog and edge computing paradigms, computation capabilities have been moved toward the edge of the network to support the requirements of highly demanding services. To ensure that the quality of such services is still met in the event of users’ mobility, migrating services across different computing nodes becomes essential. Several studies have emerged recently to address service migration in different edge-centric research areas, including fog computing, multi-access edge computing (MEC), cloudlets, and vehicular clouds. Since existing surveys in this area focus on either VM migration in general or migration in a single research field (e.g., MEC), the objective of this survey is to bring together studies from different, yet related, edge-centric research fields while capturing the different facets they addressed. More specifically, we examine the diversity characterizing the landscape of migration scenarios at the edge, present an objective-driven taxonomy of the literature, and highlight contributions that rather focused on architectural design and implementation. Finally, we identify a list of gaps and research opportunities based on the observation of the current state of the literature. One such opportunity lies in joining efforts from both networking and computing research communities to facilitate future research in this area., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Managing resources continuity from the edge to the cloud: Architecture and performance

  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Jukan, Admela
  • Ren, Guang-Jie
The wide spread deployment of smart edge devices and applications that require real-time data processing, have with no doubt created the need to extend the reach of cloud computing to the edge, recently also referred to as Fog or Edge Computing. Fog computing implements the idea of extending the cloud where the, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An Architecture for Programming Distributed Applications on Fog to Cloud Systems

  • Lordan Gomis, Francesc-Josep
  • Lezzi, Daniele
  • Ejarque, Jorge
  • Badia Sala, Rosa Maria
This paper presents a framework to develop and execute applications in distributed and highly dynamic computing systems composed of cloud resources and fog devices such as mobile phones, cloudlets, and micro-clouds. The work builds on the COMPSs programming framework, which includes a programming model and a runtime already validated in HPC and cloud environments for the transparent execution of parallel applications. As part of the proposed contribution, COMPSs has been enhanced to support the execution of applications on mobile platforms that offer GPUs and CPUs. The scheduling component of COMPSs is under design to be able to offload the computation to other fog devices in the same level of the hierarchy and to cloud resources when more computational power is required. The framework has been tested executing a sample application on a mobile phone offloading task to a laptop and a private cloud., This work is partly supported by the Spanish Ministry of Science and Technology through project TIN2015-65316-P and grant BES-2013-067167, by the Generalitat de Catalunya under contracts 2014-SGR-1051 and 2014-SGR-1272, and by the European Union through the Horizon 2020 research and innovation programme under grant 730929 (mF2C Project)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Towards an efficient key management and authentication strategy for combined fog-to-cloud continuum systems

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • Diaz, Rodrigo
  • Marín Tordera, Eva
  • Jurnet Bolarin, Alejandro
  • García Almiñana, Jordi
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Fog-to-cloud systems have emerged as a novel concept intended to improve service performance by considering fog and cloud resources in a coordinated way. In such a heterogeneous scenario, security provisioning becomes necessary, hence novel security solutions must be designed to handle the highly distributed fog-to-cloud nature. In the security area, key distribution and authentication are referred to as two critical pillars for a successful security deployment. Unfortunately, traditional centralized key distribution and authentication approaches do not meet the particularities brought by a Fog-tocloud system due to its distributed nature. In this paper, we propose a novel distributed key management and authentication (DKMA) strategy to make Fog-to-cloud systems as secure as possible. The paper ends up presenting some results assessing the benefits of the proposed strategy in terms of traffic and delay reduction., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benefits of a coordinated fog-to-cloud resources management strategy on a smart city scenario

  • Bartoli, Andrea
  • Hernández Ramírez, Francisco
  • Val, Laura
  • Gorchs, Jose
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • García Almiñana, Jordi
  • Juan Ferrer, Ana
  • Jukan, Admela
The advent of fog computing devices as computing paradigm enriching traditional cloud computing applications, paves the way to deploy innovative services, typically not completely appropriate and well supported by cloud computing technology. For example, fog computing is highly suitable for services requiring high constraints on delay, such as dependable services in the e-health arena or tracking strategies in manufacturing processes. Recently, some initiatives have focussed on putting together fog and cloud computing to make the best out of utilizing both, such as the reference architecture by the OpenFog consortium or the Fog-to-Cloud (F2C) concept. However, such a scenario requires a novel management strategy taking over the foreseen specific demands. In this paper, we argue the benefits of a F2C architecture on a particular application to be deployed on a smart city or smart environment scenario., This work is supported by the H2020 mF2C project (730929). For UPC authors is also supported by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund under contract TEC2015-66220-R (MINECO/FEDER)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Towards a context-aware Wi-Fi-based Fog Node discovery scheme using cellular footprints

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
Recently, new computing paradigms such as fog and edge computing started to emerge in an attempt to cope with the low latency requirements of new classes of IoT applications. In order for these paradigms to fully realize their potential, an important challenge to address is the discovery of fog nodes (FNs) with spare computational resources that can be used to host time- sensitive and computationally intensive application components. We particularly focus on this problem in this paper, considering the case of a WiFi-based FN discovery process. More specifically, we evaluate how practical it is to trigger the discovery of fog nodes based on a mobile phone's historical cellular footprints in order to obtain a high discovery rate and a low energy overhead. To this end, we conducted a small-scale cellular data collection to be used to test different learning approaches, including the K-Nearest Neighbors and the decision tree algorithms as well as a Hidden Markov Model (HMM). According to our evaluation results, HMM was found to achieve the maximum discovery and energy saving ratios. The impact of initial FN misdetections on the user-FN contact ratio has also been studied., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Taxonomy and resource modeling in combined fog-to-cloud systems

  • Sengupta, Souvik
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
As the technology is rapidly evolving, the society as a whole is gradually surrounding by the Internet. In such a high connectivity scenario, the recently coined IoT concept becomes a commodity driving data generation rate to increase swiftly. To process and manage these data in an efficient way, a new strategy, referred to as Fog-to-Clod (F2C), has been recently proposed leveraging two existing technologies, fog computing and cloud computing, where resources are playing a pivotal role to manage data efficiently. In these scenarios, vast numbers of interconnected heterogeneous devices coexist, thus crafting a complex set of devices. Managing efficiently these devices requires a proper resources classification and organization. In this paper, we offer a model to classify and taxonomies the whole set of resources aimed to best suit the Fog-to-Cloud (F2C) paradigm., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Towards a resilient control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier
  • Sánchez López, Sergio
  • Jurnet Bolarin, Alejandro
  • Marín Tordera, Eva
  • Jukan, Admela
  • Ren, Guang-Jie
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The capacity to efficiently manage the whole set of resources from the edge up to the cloud paves the way to a new landscape of innovative opportunities for all involved actors, be it on the research or industrial sides. Fog-to-Cloud (F2C) has been recently proposed as a management solution particularly tailored to manage the stack of resources from the edge up to the cloud in a coordinated way. However, beyond the benefits brought by considering all the spectrum of resources to run a service, resilience, as a concept must be reflected in the F2C design. In this paper, we address a particular scenario where a specific node failure in the F2C architecture will substantially impact on the whole system performance, and analyse three tentative strategies to efficiently manage such scenario., This work was partially supported by the H2020 mF2C project 730929 and for the UPC authors also by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund, under contract RTI2018-094532-B-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Securing combined Fog-to-Cloud systems: challenges and directions

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Gómez Cárdenas, Alejandro
Nowadays, fog computing is emerged for providing computational power closer to the users. Fog computing brings real-time processing, lowlatency, geo-distributed and etc. Although, fog computing do not come to compete cloud computing, it comes to collaborate. Recently, Fog-To-Cloud (F2C) continuum system is introduced to provide hierarchical computing system and facilitates fog-cloud collaboration. This F2C continuum system might encounter security issues and challenges due to their hierarchical and distributed nature. In this paper, we analyze attacks in different layer of F2C system and identify most potential security requirements and challenges for the F2C continuum system. Finally, we introduce the most remarkable efforts and trends for bringing secure F2C system., This work is supported by the H2020 projects mF2C (730929). It is also supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund both under contract RTI2018-094532-B-100., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A programming model for hybrid workflows: combining task-based workflows and dataflows all-in-one

  • Ramón Cortés, Cristian
  • Lordan Gomis, Francesc
  • Ejarque Artigas, Jorge
  • Badia Sala, Rosa Maria
In the past years, e-Science applications have evolved from large-scale simulations executed in a single cluster to more complex workflows where these simulations are combined with High-Performance Data Analytics (HPDA). To implement these workflows, developers are currently using different patterns; mainly task-based and dataflow. However, since these patterns are usually managed by separated frameworks, the implementation of these applications requires to combine them; considerably increasing the effort for learning, deploying, and integrating applications in the different frameworks. This paper tries to reduce this effort by proposing a way to extend task-based management systems to support continuous input and output data to enable the combination of task-based workflows and dataflows (Hybrid Workflows from now on) using a single programming model. Hence, developers can build complex Data Science workflows with different approaches depending on the requirements. To illustrate the capabilities of Hybrid Workflows, we have built a Distributed Stream Library and a fully functional prototype extending COMPSs, a mature, general-purpose, task-based, parallel programming model. The library can be easily integrated with existing task-based frameworks to provide support for dataflows. Also, it provides a homogeneous, generic, and simple representation of object and file streams in both Java and Python; enabling complex workflows to handle any data type without dealing directly with the streaming back-end. During the evaluation, we introduce four use cases to illustrate the new capabilities of Hybrid Workflows; measuring the performance benefits when processing data continuously as it is generated, when removing synchronisation points, when processing external real-time data, and when combining task-based workflows and dataflows at different levels. The users identifying these patterns in their workflows may use the presented uses cases (and their performance improvements) as a reference to update their code and benefit of the capabilities of Hybrid Workflows. Furthermore, we analyse the scalability in terms of the number of writers and readers and measure the task analysis, task scheduling, and task execution times when using objects or streams., This work has been supported by the Spanish Government (contracts SEV2015-0493 and TIN2015-65316-P), by Generalitat de Catalunya (contract 2014-SGR-1051), and by the European Commission through the Horizon 2020 Research and Innovation program under contract 730929 (MF2C project). Cristian Ramon-Cortes predoctoral contract is financed by the Spanish Government under the contract BES-2016-076791., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Computation task assignment in vehicular fog computing: a learning approach via neighbor advice

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
In the recent years, fog computing has been proposed as a promising paradigm to enhance the performance of latency-critical applications by hosting them within idle computation nodes (Fog Nodes, FNs) at the edge of the network. Such a paradigm has been further extended to the vehicular fog computing (VFC) scenario by leveraging available computing resources offered by modern vehicles, thus allowing them to process different types of computation tasks on behalf of onboard users or nearby vehicles. Within this context, the proper assignment of computation tasks to Vehicular FNs is an important issue that is currently under active research. To address this issue, online learning approaches, where the performances of the Vehicular FNs in terms of task execution delay are learnt via trial and error, are starting to gain in popularity. This is mainly motivated by the inherent uncertainty caused by mobility and fluctuating resource availabilities in VFC environments. However, since the process of learning from scratch in such a dynamic vehicular environment may lead to a degradation in the learning performance, this paper proposes the use of an advising mechanism, where a roadside unit (RSU) who has already learnt the performances of the vehicles within its range, uses its acquired knowledge to provide advice to a neighbor RSU who does not have enough experience allowing it to make efficient assignment decisions on its own. To evaluate this approach, we used realistic vehicular mobility traces to simulate the VFC scenario. The obtained results show that our proposed approach improves the learning performance compared to the case where no advice is leveraged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Proactive vs reactive failure recovery assessment in combined fog-to-cloud (F2C) systems

  • Souza, Vitor Barbosa
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Ramirez Almonte, Wilson
  • Sánchez López, Sergio
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The increasing number of end user devices at the edge of the network, along with their ever increasing computing capacity, as well as the advances in Data Center technologies, paved the way for the generation of Internet of Things (IoT). Several IoT services have been deployed leveraging Cloud Computing and, more recently, Fog Computing. In order to enable efficient control of cloud and fog premises, Fog-to-Cloud (F2C) has been recently proposed as a distributed architecture for coordinated management of both fog and cloud resources. Certainly, many challenges remain unsolved in combined Fog-to-Cloud systems, mostly driven by the dynamicity and volatility imposed by edge devices, such as the recovery of failures at the edge of the network. Indeed, possible failures in computing commodities may be prohibitive for the achievement of the envisioned performance in F2C systems. In this work, we assess proactive and reactive strategies for failure recovery of network elements by modelling them as a Multidimensional Knapsack Problem (MKP) and study the impact of each one on several aspects such as service allocation time, recovery delay and computing resources load. The obtained results show the effect each strategy brings, thus concluding with some analysis on the recovery strategy best suiting distinct IoT scenarios., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benefits of a Fog-to-Cloud Approach in Proximity Marketing

  • Salis, Antonio
  • Mancini, Glauco
  • Bulla, Roberto
  • Cocco, Paolo
  • Lezzi, Daniele
  • Lordan, Francesc
The EC H2020 mF2C Project is working to the development of a software framework that enables the orchestration of resources and communication at fog level, as an extension of cloud computing and interacting with the IoT. In order to show the project functionalities and added-values three real world use cases have been chosen. This paper introduces one of the mF2C use cases: Smart Fog Hub Service (SFHS) use case, in the context of an airport, with the objective of proving that the adoption of the fog-to-cloud approach brings relevant benefits in terms of performance and optimization of resource usage, thus giving an objective evidence of the impact of the mF2C framework., This work is supported by the H2020 mF2C project (730929), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Towards a proper service placement in combined Fog-to-Cloud (F2C) architectures

  • Souza, Vitor Barbosa
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Sánchez López, Sergio
  • García Almiñana, Jordi
The Internet of Things (IoT) has empowered the development of a plethora of new services, fueled by the deployment of devices located at the edge, providing multiple capabilities in terms of connectivity as well as in data collection and processing. With the inception of the Fog Computing paradigm, aimed at diminishing the distance between edge-devices and the IT premises running IoT services, the perceived service latency and even the security risks can be reduced, while simultaneously optimizing the network usage. When put together, Fog and Cloud computing (recently coined as fog-to-cloud, F2C) can be used to maximize the advantages of future computer systems, with the whole greater than the sum of individual parts. However, the specifics associated with cloud and fog resource models require new strategies to manage the mapping of novel IoT services into the suitable resources. Despite few proposals for service offloading between fog and cloud systems are slowly gaining momentum in the research community, many issues in service placement, both when the service is ready to be executed admitted as well as when the service is offloaded from Cloud to Fog, and vice-versa, are new and largely unsolved. In this paper, we provide some insights into the relevant features about service placement in F2C scenarios, highlighting main challenges in current systems towards the deployment of the next-generation IoT services, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A Beacon-assisted direction-aware scanning scheme for 802.11-based discovery in Fog-to-Cloud systems

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
In order to fully leverage idle computational resources in a fog computing scenario, a suitable discovery mechanism is needed. Within this context, F2C-Aware has been proposed in a previous work as a discovery solution where a device can detect nearby fog resources by scanning for custom 802.11 beacons being broadcast by those resources. Since mobility is an inherent characteristic in fog computing, keeping the Wi-Fi-based discovery service always on during mobility will lead to unnecessary scans being performed in non-covered areas, causing energy consumption penalties. That is why, in this paper, we propose a Beacon-assisted Direction-aware Scanning Scheme (BDSS), where we use the discovery beacon to convey the distance remaining until a next fog will be reached in each of the four cardinal directions along with the channel used for beacon advertisements. Therefore, the scan will be disabled until the next fog is reached. Emulation results show that by using this scheme, considerable energy savings could be made while maintaining a high discovery rate., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Analyzing the deployment challenges of beacon stuffing as a discovery enabler in Fog-to-Cloud systems

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
In order to meet the needs of emerging IoT applications having tight QoS constraints, new computing paradigms have been proposed, bringing computation resources closer to the edge of the network, where IoT resides. One of such paradigms is Fog-to-Cloud (F2C), defined as a framework where the combined use of fog and cloud resources is coordinated and managed in an optimized manner to achieve the desired service requirements. Unlike cloud computing, the fog provides a heterogeneous set of resources, possibly within fixed deployments provided by city managers, or that could even be contributed by end users. This brings in many challenges yet to be addressed such as resource discovery, which is the focus of this paper. This paper digs into the utilization of 802.11 beacon stuffing as a possible solution allowing the discovery of nearby devices in an F2C system, particularly dealing with specific design and implementation details of the proposed solution and more importantly its real applicability to an F2C system through the analysis of several experiments carried out on a real world testbed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An architecture for resource management in a fog-to-cloud framework

  • Sengupta, Souvik
  • García Almiñana, Jordi
  • Masip Bruin, Xavier
Fog-to-cloud (F2C) platforms provide an excellent framework for the efficient resource management in the context of smart cities. In such a scenario, a vast number of heterogeneous resources, including computing devices and IoT sensors, are considered in coordination to provide the best facilities. One of the most critical and challenging tasks in this framework is appropriately managing the set of resources available in the smart city. Many devices with different features should be efficiently classified, organized, and selected, to fulfill the requirements during services execution. In this paper, we present the design of an architecture for resource management as part of a core module in an F2C system. In this architecture, we classify both, the system resources and services and, based on the users’ preferences and sharing policies; we discuss the process of resource selection according to a predefined cost model. The cost model could consider any cost dimension, such as performance, energy consumption, or any eventual business model associated with the F2C system., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A survey of communication protocols for internet of things and related challenges of fog and cloud computing integration

  • Dizdarevic, Jasenka
  • Carpio, Francisco
  • Jukan, Admela
  • Masip Bruin, Xavier
The fast increment in the number of IoT (Internet of Things) devices is accelerating the research on new solutions to make cloud services scalable. In this context, the novel concept of fog computing as well as the combined fog-to-cloud computing paradigm is becoming essential to decentralize the cloud, while bringing the services closer to the end-system. This article surveys e application layer communication protocols to fulfill the IoT communication requirements, and their potential for implementation in fog- and cloud-based IoT systems. To this end, the article first briefly presents potential protocol candidates, including request-reply and publish-subscribe protocols. After that, the article surveys these protocols based on their main characteristics, as well as the main performance issues, including latency, energy consumption, and network throughput. These findings are thereafter used to place the protocols in each segment of the system (IoT, fog, cloud), and thus opens up the discussion on their choice, interoperability, and wider system integration. The survey is expected to be useful to system architects and protocol designers when choosing the communication protocols in an integrated IoT-to-fog-to-cloud system architecture., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

F2C-Aware: enabling discovery in Wi-Fi-powered Fog-to-Cloud (F2C) systems

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Jurnet Bolarin, Alejandro
  • Marín Tordera, Eva
  • Ren, Guang-Jie
Fog-to-Cloud (F2C) is a novel architectural framework, driven by the needs imposed by emerging ubiquitous applications and relying on the coordinated use of fog and cloud computing. Within such a setup, a suitable mechanism addressing the resource discovery problem, taking into account fog-specific characteristics (i.e. mobility, heterogeneity, etc.) is yet to be defined. On the other hand, the proliferation of Wi- Fi has been remarkably growing with inherent support for an interesting feature set. One such feature is to embed vendorspecific information within the beacon frame in order to provide customized Wi-Fi-based informational services. In this paper, we propose F2C-Aware, a discovery approach that leverages this feature to allow devices in Wi-Fi-powered Fog-to-Cloud systems to become aware of each other. The proposed approach takes into account the fact that devices in the fog are not necessarily connected to the same local network and thus it provides discovery prior to network association, which could help in obtaining time and energy savings., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Workflow environments for advanced cyberinfrastructure platforms

  • Badia Sala, Rosa Maria
  • Ejarque Artigas, Jorge
  • Lordan Gomis, Francesc
  • Lezzi, Daniele
  • Conejero Bañón, Javier
  • Álvarez Cid-Fuentes, Javier
  • Becerra Fontal, Yolanda
  • Queralt Calafat, Anna
Progress in science is deeply bound to the effective use of high-performance computing infrastructures and to the efficient extraction of knowledge from vast amounts of data. Such data comes from different sources that follow a cycle composed of pre-processing steps for data curation and preparation for subsequent computing steps, and later analysis and analytics steps applied to the results. However, scientific workflows are currently fragmented in multiple components, with different processes for computing and data management, and with gaps in the viewpoints of the user profiles involved. Our vision is that future workflow environments and tools for the development of scientific workflows should follow a holistic approach, where both data and computing are integrated in a single flow built on simple, high-level interfaces. The topics of research that we propose involve novel ways to express the workflows that integrate the different data and compute processes, dynamic runtimes to support the execution of the workflows in complex and heterogeneous computing infrastructures in an efficient way, both in terms of performance and energy. These infrastructures include highly distributed resources, from sensors and instruments, and devices in the edge, to High-Performance Computing and Cloud computing resources. This paper presents our vision to develop these workflow environments and also the steps we are currently following to achieve it., This work has been supported by the Spanish Government (SEV2015-0493), by the Spanish Ministry of Science and Innovation (contract TIN2015-65316-P), by Generalitat de Catalunya (contract 2014-SGR-1051). Javier Conejero postdoctoral contract is co-financed by the Ministry of Economy and Competitiveness under Juan de la Cierva Formacion´ postdoctoral fellowship number FJCI-2015-24651. This work is supported by the H2020 mF2C project (730929) and the CLASS project (780622). The participation of Rosa M Badia in the BDEC2 meetings is supported by the EXDCI project (800957). The dislib library developments are partially funded under the project agreement between BSC and FUJITSU., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

mF2C: Towards a coordinated management of the IoT-fof-cloud continuum

  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Juan Ferrer, Ana
  • Queralt Calafat, Anna
  • Jukan, Admela
  • García Almiñana, Jordi
  • Lezzi, Daniele
  • Jensen, Jens
  • Cordeiro, Cristovao
  • Leckey, Alexander
  • Salis, Antonio
  • Guilhot, Denis
  • Cankar, Matic
Fog computing enables location dependent resource allocation and low latency services, while fostering novel market and business opportunities in the cloud sector. Aligned to this trend, we refer to Fog-tocloud (F2C) computing system as a new pool of resources, set into a layered and hierarchical model, intended to ease the entire fog and cloud resources management and coordination. The H2020 project mF2C aims at designing, developing and testing a first attempt for a real F2C architecture. This document outlines the architecture and main functionalities of the management framework designed in the mF2C project to coordinate the execution of services in the envisioned set of heterogeneous anddistributed resources., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A Novel and scalable naming strategy for IoT scenarios

  • Gómez Cárdenas, Alejandro
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
  • Kahvazadeh, Sarang
Fog-to-Cloud (F2C) is a novel paradigm aimed at increasing the benefits brought by the growing Internet-of-Things (IoT) devices population at the edge of the network. F2C is intended to manage the available resources from the core to the edge of the network, allowing services to choose and use either a specific cloud or fog offer or a combination of both. Recognized the key benefits brought by F2C systems, such as low-latency for real-time services, location awareness services, mobility support and the possibility to process data close to where they are generated, research efforts are being made towards the creation of a widely accepted F2C architecture. However, in order to achieve the desired F2C control framework, many open challenges must be solved. In this paper, we address the identity management challenges and propose an Identity Management System (IDMS) that is based on the fragmentation of the network resource IDs., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A user-centric mobility management scheme for high-density fog computing deployments

  • Rejiba, Zeineb
  • Masip Bruin, Xavier
  • Marín Tordera, Eva
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The inherent mobility characterizing users in fog computing environments along with the limited wireless range of their serving fog nodes (FNs) drives the need for designing efficient mobility management (MM) mechanisms. This ensures that users' resource-intensive tasks are always served by the most suitable FNs in their vicinity. However, since MM decisionmaking requires control information which is difficult to predict accurately a-priori, such as the users' mobility patterns and the dynamics of the FNs, researchers have started to shift their attention towards MM solutions based on online learning. Motivated by this approach, in this paper, we consider a bandit learning model to address the mobility-induced FN selection problem, with a particular focus on scenarios with a high FN density. Following this approach, a software agent implemented within the user's device learns the FNs' delay performances via trial and error, by sending them the user's computation tasks and observing the perceived delay, with the goal of minimizing the accumulated delay. This task is particularly challenging when considering a high FN density, since the number of unknown FNs that need to be explored is high, while the time that can be spent on learning their performances is limited, given the user's mobility. Therefore, to address this issue, we propose to limit the number of explorations to a small subset of the FNs. As a result, the user can still have time to be served by the FN that was found to yield the lowest delay performance. Using real world mobility traces and task generation patterns, we found that it pays off to limit the number of explorations in high FN density scenarios. This is shown through significant improvements in the cumulative regret as well as the instantaneous delay, compared to the case where all newly-appeared FNs are explored., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A multidimensional control architecture for combined fog-to-cloud systems

  • Masip Bruin, Xavier
  • Souza, Vitor Barbosa
  • Marín Tordera, Eva
  • Ren, Guang-Jie
  • Jukan, Admela
  • García Almiñana, Jordi
The fog/edge computing concept has set the foundations for the deployment of new services leveraging resources deployed at the edge paving the way for an innovative collaborative model, where end-users may collaborate with service providers by sharing idle resources at the edge of the network. Combined Fog-to-Cloud (F2C) systems have been recently proposed as a control strategy for managing fog and cloud resources in a coordinated way, aimed at optimally allocating resources within the fog-to-cloud resources stack for an optimal service execution. In this work, we discuss the unfeasibility of the deployment of a single control topology able to optimally manage a plethora of edge devices in future networks, respecting established SLAs according to distinct service requirements and end-user profiles. Instead, a multidimensional architecture, where distinct control plane instances coexist, is then introduced. By means of distinct scenarios, we describe the benefits of the proposed architecture including how users may collaborate with the deployment of novel services by selectively sharing resources according to their profile, as well as how distinct service providers may benefit from shared resources reducing deployment costs. The novel architecture proposed in this paper opens several opportunities for research, which are presented and discussed at the final section., This work was supported by the H2020 EU mF2C project, ref. 730929 and for UPC authors, also by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under contract RTI2018-094532-B-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Deploying fog-to-cloud towards a security architecture for critical infrastructure scenarios

  • Kahvazadeh, Sarang
  • Masip Bruin, Xavier
  • Marcer Albareda, Pau
  • Marín Tordera, Eva
Critical infrastructures are bringing security, and safety for people in terms of healthcare, water, electricity, industry, transportation, etc. The huge amount of data produced by CIs need to be aggregated, filtered, and stored. Cloud computing was merged into the CIs for utilizing cloud data centers as a pay-as-you-go online computing system for outsourcing services for data storage, filtering and aggregating. On the other hand, CIs need real-time processing for providing sophisticated services to people. Consequently, fog computing is merged into CIs aimed at providing services closer to the users, turning into a smooth real-time decision making and processing. When considering both, that is fog and cloud (for example, deploying the recently coined hierarchical fog-to-cloud F2C concept), new enriched features may be applied to the CIs. Security in CIs is one of the most essential challenges since any failure or attack can turn into a national wise disaster. Moreover, CIs also need to support quality of service (QoS) guarantees for users. Thus, bringing balanced QoS vs security is one of the main challenges for any CI infrastructure. In this paper, we illustrate the benefits of deploying an F2C system in CIs, particularly identifying specific F2C security requirements to be applied to CIs. Finally, we also introduce a decoupled security architecture specifically tailored to CIs that can bring security with reasonable QoS in terms of authentication and key distribution time delay., This work has been supported by the Spanish Ministry of Science, Innovation and Universities and the European Regional Development Fund (FEDER) under contract RTI2018-094532-B-I00, and by the H2020 European Union mF2C project with reference 730929., Peer Reviewed, Postprint (author's final draft)