Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Pre-eruptive magmatic processes and their timescales revealed by crystal zoning

  • Albert, Helena
  • Sainz-Maza, Sergio
  • Geyer, Adelina
  • López, Carmen
EGU2020: Sharing Geoscience Online, 4-8 May 2020, Understanding the processes that occur in the magma plumbing systems prior to eruption and how they relate to monitoring data can lead to improved volcanic hazard assessment. Crystal compositions are witnesses of the architecture and dynamics of the plumbing system, and crystal zoning patterns can inform us of the range of magmatic environments, and of the likely processes that lead to eruption. We have studied the petrology and the geochemistry of the monogenetic historical eruptions occurred in Tenerife (Canary Islands) that come out through the rift zones (NW and NE Rifts) as well as the last mafic intra-caldera monogenetic eruption of Montaña Mostaza (15 ka). The deposits from the NE Rift and the intra-caldera contain complexly zoned olivine crystals suggesting open system and magma mixing, while crystals from the NW Rift are mainly normally zoned. By modelling the zonation patterns of the crystals we have calculated the timescales of the magma intrusions and ascent to the surface. We have found that the magmas erupted along the NW rift are more evolved and vary from basanites to phono-tephrites, while the magmas from the NE rift are basanites recording different mixing events between magma pockets occurred around 1-2 years, 3 months and few days before the eruption. The olivine crystals from the intra-caldera eruption display more variety in the zoning patterns than the eruptions from the rift, suggesting a more complex history. Based on the integration of the petrological and modelling results with gravimetric and geophysical data we propose, at least, three main different ascent histories (paths and timescales) for monogenetic eruptions in Tenerife., This research has been partially funded by the EUROVOLC project (Horizon 2020 Grant Agreement: 731070).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Transnational Access to on-site modelling resources and hazard assessment tools: Establishing the pillars of scientific collaboration

  • Geyer, Adelina
  • Ronchin, Erika
  • Jimenez, Diana
  • Martí Molist, Joan
  • Martínez, Marc
EGU2020: Sharing Geoscience Online, 4-8 may 2020, The Agencia Estatal Consejo Superior de Investigaciones Científicas (CSIC) is the largest public multidisciplinary research organization in Spain. The Institute of Earth Sciences Jaume Almera (ICTJA) of Barcelona is one of the main CSIC centres dedicated to Earth Sciences. The Group of Volcanology of Barcelona (GVB), part of Environmental Geology and Geohazards of the ICTJA, has vast experience in numerical and experimental modelling of volcanic and related processes, as well as in the development of hazard assessment and risk management e-tools and methodologies to be applied in active volcanic regions. Within the framework of the EUROVOLC project, the GVB-ICTJA has offered physical access to on-site modelling resources including initial training, guidelines and technical assistance to simulate with the FEM modelling software COMSOL Multiphysics: (i) thermo-fluid dynamic processes occurring during the phases of magma injection, accumulation and cooling and (ii) local and regional stress field of a volcanic area. The on-site access has been complemented with further remote assistance to the users to help finishing their research work. Additionally, the ICTJA has provided on-site access to VOLCANBOX (http://www.volcanbox.eu), an e-tool that integrates, in a systematic and sequential way, a series of well-tested tools addressing various aspects of the volcanic hazard processes and risk assessment. E-tools-computer or Web-based applications can help users employ probabilistic methods to assess and forecast volcanic eruptions and hazards, as well as their spatial and temporal likelihood of occurrence. In the first Transnational Access Call opened by the EUROVOLC project two accesses were funded, one for each offered installation. Thanks to the activities carried out during both accesses, the pillars for future scientific collaboration between the visiting research groups and the GVB-ICTJA have been successfully consolidated., These activities were funded by the EUROVOLC project (Horizon 2020 Grant Agreement: 731070).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

FALL3D-8.0: a computational model for atmospheric transport and deposition of particles, aerosols and radionuclides ¿ Part 2: Model validation

  • Prata, Andrew T.
  • Mingari, Leonardo
  • Folch, Arnau
  • Macedonio, Giovanni
  • Costa, Antonio
This paper presents model validation results for the latest version release of the FALL3D atmospheric transport model. The code has been redesigned from scratch to incorporate different categories of species and to overcome legacy issues that precluded its preparation towards extreme-scale computing. The model validation is based on the new FALL3D-8.0 test suite, which comprises a set of four real case studies that encapsulate the major features of the model; namely, the simulation of long-range fine volcanic ash dispersal, volcanic SO2 dispersal, tephra fallout deposits and the dispersal and deposition of radionuclides. The first two test suite cases (i.e. the June 2011 Puyehue-Cordón Caulle ash cloud and the June 2019 Raikoke SO2 cloud) are validated against geostationary satellite retrievals and demonstrate the new FALL3D data insertion scheme. The metrics used to validate the volcanic ash and SO2 simulations are the structure, amplitude and location (SAL) metric and the figure of merit in space (FMS). The other two test suite cases (i.e. the February 2013 Mt. Etna ash cloud and associated tephra fallout deposit, and the dispersal of radionuclides resulting from the 1986 Chernobyl nuclear accident) are validated with scattered ground-based observations of deposit load and local particle grain size distributions and with measurements from the Radioactivity Environmental Monitoring database. For validation of tephra deposit loads and radionuclides, we use two variants of the normalised root-mean-square error metric. We find that FALL3D-8.0 simulations initialised with data insertion consistently improve agreement with satellite retrievals at all lead times up to 48¿h for both volcanic ash and SO2 simulations. In general, SAL scores lower than 1.5 and FMS scores greater than 0.40 indicate acceptable agreement with satellite retrievals of volcanic ash and SO2. In addition, we show very good agreement, across several orders of magnitude, between the model and observations for the 2013 Mt. Etna and 1986 Chernobyl case studies. Our results, along with the validation datasets provided in the publicly available test suite, form the basis for future improvements to FALL3D (version 8 or later) and also allow for model intercomparison studies., This research has been supported by the European Commission, H2020 Excellence Science (ChEESE (grant no.823844)), the European Commission, H2020 Marie Skłodowska-Curie Actions (STARS (grant no. 754433)), the European Commission, H2020 Research Infrastructures (EUROVOLC (grant no.731070)) and the Ministero dell’Istruzione, dell’Università e della Ricerca (grant no. 805 FOE 2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The integrated multidisciplinary european volcano infrastructure: from the conception to the implementation

  • Puglisi, Giuseppe
  • Reitano, Danilo
  • Spampinato, Letizia
  • Vogfjörd, Kristin
  • Barsotti, Sara
  • Cacciola, Lucia
  • Geyer, Adelina
  • Steinar Guðjónsson, Davíð
  • Guehenneux, Yannick
  • Komorowski, Jean-Christophe
  • Labazuy, Philippe
  • Lemarchand, Arnaud
  • Nave, Rosella
  • Saurel, Jean-Marie
  • Bachèlery, Patrick
Recent decades have highlighted the increasing need to connect and strengthen the volcanology community at European level. Indeed, research in the volcanology field is highly qualified in Europe and the volcano monitoring infrastructures have achieved valuable know-how, becoming the state-of-the-art in the world. However, the lack of common good practices in sciences and technologies, missing standards, as well as a significant fragmentation of the community requires coordination to move forward and guarantee a trans-national harmonisation. The European Plate Observing System (EPOS) represented the first opportunity to initiate this process of coordination by encouraging the creation of a European volcanological scientific infrastructure for data and service sharing. During the preparation and the design of EPOS, the volcanology community identified the objectives and the needs of the community building, the services to be provided and the work plan to implement the infrastructure. To achieve this aim, the contribution from three European projects FUTUREVOLC, MED-SUV and EUROVOLC was essential. This paper presents the main steps performed during the last years for building the community and implementing the infrastructure., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Data and service management of the EPOS Volcano Observations Thematic Core Service by the European volcanological community

  • Spampinato, Letizia
  • Indovina, Enrico
  • Geyer, Adelina
  • Júlíusdóttir, Ríkey
  • Reitano, Danilo
  • Puglisi, Giuseppe
  • Nave, Rosella
  • Santangelo, Ileana
  • Vogfjörd, Kristín
  • Labazuy, Philippe
  • Cacciola, Lucia
  • Domínguez Cerdeña, Itahiza
  • Guehenneux, Yannick
  • Komorowski, Jean-Christophe
  • Saurel, Jean-Marie
The Volcano Observations Thematic Core Service (VOLC-TCS) is one of ten core services forming the European Research Infrastructure Consortium for the European Plate Observing System (EPOS ERIC). The main objective of the VOLC-TCS is the implementation of a technical, financial, and legal framework compliant with EPOS ERIC to (i) strengthen the European volcanology community represented by Volcano Observatories (VOs) and Volcanological Research Institutions (VRIs), and (ii) provide virtual access to the community’s data, data products software and services (DDSSs) from volcanoes in Europe and European overseas territories. The efforts of the VOLC-TCS community began prior to the appointment of EPOS as an ERIC and have followed a long-term work plan that started in 2002. One of the main challenges for the management of volcanological data has consisted in their great heterogeneity regarding technical characteristics and also legal aspects (e.g. different data policies among the data providers, different purposes for the use of data, ranging from science to monitoring, early-warning and crisis response, and communication and outreach). Another challenge has derived from the consistency of the VOLC-TCS’ products with the overall service provision of EPOS, which merges services from different Earth Science communities (seismology, GNSS, geomagnetic, geochemistry, geology, etc.). Some of the services used in volcanology are in common with the other communities, thus the implementation work was also devoted to harmonising the data and products with standards defined by other TCSs. Yet another important task has been the implementation of the community Gateway to expose and enable access to services not fully compliant with EPOS, or to services implemented by institutions outside the EPOS perimeter, as well as to create a platform that can act as an interface between the VOLC-TCS and data infrastructures operating at a global level (e.g. WOVOdat). Based on the experience gained and the results achieved, we report here on the state of the art of the VOLC-TCS implementation since 2018 and propose future actions to address some of the main technical challenges and measures to ensure mid-to-long term sustainability of the services., The authors really thank all the people coordinating and contributing to EPOS-PP (ECGA n. 262229), EPOS-IP (ECGA n. 676564), and EPOS-SP (ECGA n. 871121) projects for supporting and believing in the volcanology community to make the VOLC‑TCS a reality. The VOLC‑TCS has significantly benefited from the FUTUREVOLC (ECGA n. 308377) and MED-SUV (ECGA n. 308665) supersite projects as well as the EUROVOLC (ECGA n. 731070) infrastructure project. The Spanish EPOS Node is grateful for the financial support provided by CSIC (INFRA20005) and the grant RED2022-134516-E financed by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Guidelines and metadata model for a repository of volcanic samples

  • Corsaro, Rosa Anna
  • D’Oriano, Claudia
  • Muro, Andrea Di
  • Geyer, Adelina
  • Gurioli, Lucia
  • Pappalardo, Lucia
  • Pennisi, Maddalena
  • Pompilio, Massimo
  • Principe, Claudia
  • Re, Giuseppe
The volcanological community manages heterogeneous types of data acquired during research projects and monitoring activities of volcanoes. These data consist of both continuous and discrete measurements and observations, which are carried out by ground-based networks and remote sensing instruments, or during field surveys and laboratory analyses. Many types of volcanological research are largely based on the accurate sampling of rocks erupted during past and ongoing volcanic activity. Each sample represents a “physical object” which should be identified and archived before part of it is removed for analytical purposes. In this context, we recommend assigning the collected samples unique and persistent identifiers, such as the International Generic Sample Number (IGSN). However, although the IGSN allows recording the most essential information of the collected samples (e.g. geographic location, sampling method, and collector), the predefined metadata fields are not exhaustive for volcanic samples, which require additional information such as type and timing of the eruptive event, sample temperature, and texture. Here we design the guidelines necessary to facilitate communication between and search of multiple sample repositories and databases run by disparate institutions. To this aim, we build a metadata model, which integrate the IGSN metadata with supplementary information necessary for the monitoring and research activities carried out by the volcanological community. The long-term curation of collected materials is an important investment for the future. Indeed, these collections are a resource for the production of volcanological data, they reduce the need for repeated sampling, they preserve samples that can no longer be collected, and they allow repeat analyses to be made. The primary aim of this work, based on discussion within the EUROVOLC project, is to provide the basic information for populating a relational database structure in the future for the description of different volcanic samples, physically located in different physical repositories and institutions, in order to facilitate future sharing between different groups of scientists and more complete volcanological studies, by means of the proposed metadata structure., The work has been supported by the H2020 EUROVOLC project (Grant Agreement ID 731070). The work is funded by the EPOS-SpN RED2022-134516-E grant (MICIU/AEI/10.13039/501100011033), the Intramural CSIC EUROPEAN PLATE OBSERVING SYSTEM - NODO ESPAÑOL DE EPOS (EPOS-ES) (Ref. 202530E050) and the European Plate Observation System-Spanish Node EPOS-SpN / Nodo Español de EPOS (INFRA20005) grant funded by the Programa CSIC en Grandes Infraestructuras de Investigación Europea. This is Contribution 687 of the ClerVolc Program of Excellence of the International Research Centre of Disaster Science and Sustainable Development., Peer reviewed