Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

TECNALIA Publications
Publication Artículo científico (JournalArticle)

Standardising Marine Renewable Energy Testing: Gap Analysis and Recommendations for Development of Standards: Gap analysis and recommendations for development of standards

  • Noble, Donald R.
  • O’Shea, Michael
  • Judge, Frances
  • Robles, Eider
  • Martinez, Rodrigo
  • Khalid, Faryal
  • Thies, Philipp R.
  • Johanning, Lars
  • Corlay, Yann
  • Gabl, Roman
  • Davey, Thomas A. D.
  • Vejayan, Nithiananthan
  • Murphy, Jimmy
Marine renewable energy (MRE) is still an emerging technology. As such, there is still a lack of mature standards and guidance for the development and testing of these devices. The sector covers a wide range of disciplines, so there is a need for more comprehensive guidance to cover these. This paper builds on a study undertaken in the MaRINET2 project to summarise recommendations and guidance for testing MRE devices and components, by reviewing the recently published guidance. Perceived gaps in the guidance are then discussed, expanding on the previous study. Results from an industry survey are also used to help quantify and validate these gaps. The main themes identified can be summarised as: the development progression from concept to commercialisation, including more complex environmental conditions in testing, accurately modelling and quantifying the power generated, including grid integration, plus modelling and testing of novel moorings and foundation solutions. A pathway to a standardised approach to MRE testing is presented, building on recommendations learnt from the MaRINET2 round-robin testing, showing how these recommendations are being incorporated into the guidance and ultimately feeding into the development of international standards for the marine renewable energy sector.
TECNALIA Publications
Publication Contribución de congreso (ConferenceOutput)

OC6 Phase I: Investigating the underprediction of low-frequency hydrodynamic loads and responses of a floating wind turbine: Investigating the underprediction of low-frequency hydrodynamic loads and responses of a floating wind turbine

  • Gueydon, S
  • Bachynski, E
  • Wang, L
  • Jonkman, J
  • Alarcón, D
  • Amet, E
  • Beardsell, A
  • Bonnet, P
  • Boudet, B
  • Brun, C
  • Chen, Z
  • Féron, M
  • Forbush, D
  • Galinos, C
  • Galvan, J
  • Gilbert, P
  • Gómez, J
  • Harnois, V
  • Haudin, F
  • Hu, Z
  • Dreff, J Le
  • Leimeister, M
  • Lemmer, F
  • Li, H
  • Mckinnon, G
  • Mendikoa, I
  • Moghtadaei, A
  • Netzband, S
  • Oh, S
  • Pegalajar-Jurado, A
  • Nguyen, M Q
  • Ruehl, K
  • Schünemann, P
  • Shi, W
  • Shin, H
  • Si, Y
  • Surmont, F
  • Trubat, P
  • Qwist, J
  • Wohlfahrt-Laymann, S
  • Robertson, A N
Phase I of the OC6 project is focused on examining why offshore wind design tools underpredict the response (loads/motion) of the OC5-DeepCwind semisubmersible at its surge and pitch natural frequencies. Previous investigations showed that the underprediction was primarily related to nonlinear hydrodynamic loading, so two new validation campaigns were performed to separately examine the different hydrodynamic load components. In this paper, we validate a variety of tools against this new test data, focusing on the ability to accurately model the low-frequency loads on a semisubmersible floater when held fixed under wave excitation and when forced to oscillate in the surge direction. However, it is observed that models providing better load predictions in these two scenarios do not necessarily produce a more accurate motion response in a moored configuration.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

SPH simulation of floating structures with moorings

  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Hall, Matthew
  • Altomare, Corrado
  • Wu, Minghao
  • Stratigaki, Vasiliki
  • Troch, Peter
  • Cappietti, Lorenzo
  • Gómez Gesteira, Ramon
The open-source code DualSPHysics is applied to simulate the interaction of sea waves with floating offshore structures, which are typically moored to the seabed, such as vessels, boats, floating breakwaters and wave energy converters (WECs). The goal is to develop a numerical tool that allows the study of the survivability of floating moored devices under highly energetic sea states, obtaining the optimum mooring layout to increase lifetime. The moorings are modelled by coupling DualSPHysics with MoorDyn, a lumped-mass mooring dynamics model. MoorDyn represents mooring line behaviour subject to axial elasticity, hydrodynamic forces in quiescent water, and vertical contact forces with the seabed. Calculated mooring tensions at the fairlead are added as external forces in order to compute the resulting response and motions of the floating structures in DualSPHysics. The coupled model has been validated against data from scale model tests generated during the experimental campaigns for the European MaRINET2 EsflOWC project. In order to evaluate the accuracy of the coupling implementation with the lumped-mass mooring model, free-surface elevation, motions of the floater and mooring tensions are numerically computed and compared to experimental data. Overall, the results demonstrate the accuracy of the coupling between DualSPHysics and MoorDyn to simulate the motion of a moored floating structure under the action of regular waves. Going forward, this modelling approach can be employed to simulate more complex floating structures such as floating wind turbines, buoys, WECs, offshore platforms, etc., Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Experimental study of a moored floating Oscillating Water Column Wave-Energy Converter and of a moored cubic box

  • Wu, Minghao
  • Stratigaki, Vasiliki
  • Troch, Peter
  • Altomare, Corrado
  • Verbrugghe, Tim
  • Cabrera Crespo, Alejandro Jacobo
  • Cappietti, Lorenzo
  • Hall, Matthew
  • Gómez Gesteira, Ramon
This paper describes experimental research on a floating moored Oscillating Water Column (OWC)-type Wave-Energy Converter (WEC) carried out in the wave flume of the Coastal Engineering Research Group of Ghent University. This research has been introduced to cover the existing data scarcity and knowledge gaps regarding response of moored floating OWC WECs. The obtained data will be available in the future for the validation of nonlinear numerical models. The experiment focuses on the assessment of the nonlinear motion and mooring-line response of a 1:25 floating moored OWC WEC model to regular waves. The OWC WEC model motion has 6 degrees of freedom and is limited by a symmetrical 4-point mooring system. The model is composed of a chamber with an orifice on top of it to simulate the power-take-off (PTO) system and the associated damping of the motion of the OWC WEC model. In the first place, the motion response in waves of the moored floating OWC WEC model is investigated and the water surface elevation in the OWC WEC chamber is measured. Secondly, two different mooring-line materials (iron chains and nylon ropes) are tested and the corresponding OWC WEC model motions and mooring-line tensions are measured. The performance of these two materials is similar in small-amplitude waves but different in large wave-amplitude conditions. Thirdly, the influence of different PTO conditions is investigated by varying the diameter of the top orifice of the OWC WEC model. The results show that the PTO damping does not affect the OWC WEC motion but has an impact on the water surface elevation inside the OWC chamber. In addition, an unbalanced mooring configuration is discussed. Finally, the obtained data for a moored cubic model in waves are presented, which is a benchmarking case for future validation purposes., Research Foundation - Flanders | Ref. 3G029114, Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Round Robin Testing: Exploring Experimental Uncertainties through a Multifacility Comparison of a Hinged Raft Wave Energy Converter

  • Davey, Thomas
  • Sarmiento Martínez, Javier
  • Ohana, Jérémy
  • Thiebaut, Florent
  • Haquin, Sylvain
  • Weber, Matthieu
  • Gueydon, Sebastien
  • Judge, Frances
  • Lyden, Eoin
  • Gabl. Roman
  • Jordan, Laura-Beth
  • Hann, Martyn
  • Wang, Daming
  • Collins, Keri
  • Conley, Daniel
  • Greaves, Deborah
  • Ingram, David M.
  • Murphy, Jimmy
  • O´Shea, Michael
ABSTRACT: The EU H2020 MaRINET2 project has a goal to improve the quality, robustness and accuracy of physical modelling and associated testing practices for the offshore renewable energy sector. To support this aim, a round robin scale physical modelling test programme was conducted to deploy a common wave energy converter at four wave basins operated by MaRINET2 partners. Test campaigns were conducted at each facility to a common specification and test matrix, providing the unique opportunity for intercomparison between facilities and working practices. A nonproprietary hinged raft, with a nominal scale of 1:25, was tested under a set of 12 irregular sea states. This allowed for an assessment of power output, hinge angles, mooring loads, and six-degree-of-freedom motions. The key outcome to be concluded from the results is that the facilities performed consistently, with the majority of variation linked to differences in sea state calibration. A variation of 5?10% in mean power was typical and was consistent with the variability observed in the measured significant wave heights. The tank depth (which varied from 2?5 m) showed remarkably little influence on the results, although it is noted that these tests used an aerial mooring system with the geometry unaffected by the tank depth. Similar good agreement was seen in the heave, surge, pitch and hinge angle responses. In order to maintain and improve the consistency across laboratories, we make recommendations on characterising and calibrating the tank environment and stress the importance of the device?facility physical interface (the aerial mooring in this case)., his research was funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement Number 731084, Project MaRINET2 (Marine Renewable Infrastructure Network for Enhancing Technologies 2).