Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Complex architecture of mud volcano systems: New insights on flow pathways unravel intricate fluid circulation

  • Xu, Shuhui
  • Menapace, Walter
  • Urgeles, Roger
  • Ford, Jonathan
  • Calahorrano, Alcinoe
  • Bartolomé, Rafael
  • Kopf, Achim J.
16 pages, 7 figures, 2 tables, supplemental material https://doi.org/10.1130/B37954.1.-- Bathymetry data for the study area and the studied mud volcanoes, seismic data for the profiles GMV01, GMV03, INS2_Line13 and INS2_Line23, and a MATLAB-based pore water modeling code are archived in Zenodo https://doi.org/10.5281/zenodo.10393503), Mud volcanoes (MVs) are important gateways for fluid migration, particularly in subduction zones. We investigate five MVs in the Gulf of Cadiz and the Mediterranean Ridge, revealing underappreciated fluid pathways responsible for fluid expulsion. By utilizing pore water geochemistry, advection-diffusion modeling, and high-resolution seismic profiles, we trace fluid origins, quantify fluxes, and constrain migration pathways, focusing on the Ginsburg MV. The Cl-depleted summit fluids originate from clay dehydration within the Allochthonous Unit of the Gulf of Cadiz (AUGC) and are channeled by central conduits, reaching high advection velocities (2.8−15 cm/yr). The Cl-enriched moat fluids exhibit slower advection velocities (0.3 cm/yr) and show additional evaporite effects. To constrain moat fluid sources, fluid formation temperatures have been calculated using water isotopes and Mg-Li geothermometer. The resulting low temperatures suggest source depths atop the AUGC (∼0.8 kmbsf), consistent with seismic data across the Ginsburg MV (showing high-amplitude reflections at the same depths) but different from the summit sites, where the source is deeper within the AUGC (∼2.2 kmbsf). We relate moat seepage occurrence to fractures formed due to edifice subsidence, marked by stacked enhanced reflectors. Upon comparison with all analyzed MVs, we suggest that peripheral seepage of MV edifices is a widespread process that appears in a specific evolutionary stage, during which it represents an important component of fluid budget. This phenomenon, which has been observed in terrestrial MVs, is rarely described for their submarine counterparts but has wide biogeochemical implications for fluid budget in subduction zones and the sustenance of seafloor biological communities, Shuhui Xu is supported by the China Scholarship Council (CSC), and Walter Menapace is supported by the H2020 MSCA-IF-TURBOMUD project (grant 101018321). This research was funded in part by the Austrian Science Fund (FWF; grant M 3146-417 N) and projects CTM2015-70155-R (INSIGHT) and PID2020-114856RB-100 (ICEFLAME) funded by the Spanish Ministry of Science and Innovation (MCIN/ AEI/10.13039/501100011033). The European project EUMarineRobots (EUMR) is acknowledged for cofunding the M167 expedition (grant 731103), With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Multibeam bathymetry data, multi-channel seismic reflection profiles and pore water modeling code [Dataset]

  • Xu, Shuhui
  • Menapace, Walter
  • Urgeles, Roger
  • Ford, Jonathan
  • Calahorrano, Alcinoe
  • Bartolomé, Rafael
  • Kopf, Achim J.
Supplementary material for "Complex architecture of mud volcano systems: new insights on flow pathways unravel intricate fluid circulation" https://doi.org/10.1130/B37954.1, Shuhui Xu is supported by the China Scholarship Council (CSC), and Walter Menapace is supported by the H2020 MSCA-IF-TURBOMUD project (grant 101018321). This research was funded in part by the Austrian Science Fund (FWF; grant M 3146-417 N) and projects CTM2015-70155-R (INSIGHT) and PID2020-114856RB-100 (ICEFLAME) funded by the Spanish Ministry of Science and Innovation (MCIN/ AEI/10.13039/501100011033). The European project EUMarineRobots (EUMR) is acknowledged for cofunding the M167 expedition (grant 731103), With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Extrinsic visual–inertial calibration for motion distortion correction of underwater 3D scans

  • Castillón, Miguel
  • Pi Roig, Roger
  • Palomer Vila, Albert
  • Ridao Rodríguez, Pere
Underwater 3D laser scanners are an essential type of sensor used by unmanned underwater vehicles (UUVs) for operations such as navigation, inspection, and object recognition and manipulation. Scanners that acquire 3D data by sweeping a laser plane across the scene can provide very high lateral resolution. However, their data may suffer from rolling shutter effect if the change of pose of the robot with respect to the scanned target during the sweep is not negligible. In order to compensate for motion-related distortions without the need for point cloud postprocessing, the 6-DoF pose at which the scanner acquires each line needs to be accurately known. In the underwater domain, autonomous vehicles are often equipped with a high-end inertial navigation system (INS) that provides reliable navigation data. Nonetheless, the relative pose of the 3D scanner with respect to the inertial reference frame of the robot is not usually known a priori. Therefore, this paper uses an ego-motion-based calibration algorithm to calibrate the extrinsic parameters of the visual-inertial sensor pair. Simulations are performed to quantify how miscalibration affects motion-related distortion. The method is also evaluated experimentally in laboratory conditions, This research was founded by the GIRONA1000 project (grant number DPI2017-86372-C3-2-R, by the Spanish Ministry of Science), the EUMR project (grant number H2020-INFRAIA-2017-1-twostage-731103, by the European Commission), by the doctoral grant of the University of Girona IFUdG2019 and by the Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya under grant 2019FI_B_00812
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

H-SLAM: Rao-Blackwellized particle filter SLAM using Hilbert Maps

  • Vallicrosa Massaguer, Guillem
  • Ridao Rodríguez, Pere
Occupancy Grid maps provide a probabilistic representation of space which is important for a variety of robotic applications like path planning and autonomous manipulation. In this paper, a SLAM (Simultaneous Localization and Mapping) framework capable of obtaining this representation online is presented. The H-SLAM (Hilbert Maps SLAM) is based on Hilbert Map representation and uses a Particle Filter to represent the robot state. Hilbert Maps offer a continuous probabilistic representation with a small memory footprint. We present a series of experimental results carried both in simulation and with real AUVs (Autonomous Underwater Vehicles). These results demonstrate that our approach is able to represent the environment more consistently while capable of running online, Research funded by Ministerio de Educación, Cultura y Deporte (PhD grant ref. FPU12/05384 and ARCHROV project ref. DPI2014-57746-C3-3-R), and by the European Comission (EUMR project ref. H2020- INFRAIA-2017-1-twostage-731103)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Underwater Object Recognition Using Point-Features, Bayesian Estimation and Semantic Information

  • Himri, Khadidja
  • Ridao Rodríguez, Pere
  • Grácias, Nuno Ricardo Estrela
This paper proposes a 3D object recognition method for non-coloured point clouds using point features. The method is intended for application scenarios such as Inspection, Maintenance and Repair (IMR) of industrial sub-sea structures composed of pipes and connecting objects (such as valves, elbows and R-Tee connectors). The recognition algorithm uses a database of partial views of the objects, stored as point clouds, which is available a priori. The recognition pipeline has 5 stages: (1) Plane segmentation, (2) Pipe detection, (3) Semantic Object-segmentation and detection, (4) Feature based Object Recognition and (5) Bayesian estimation. To apply the Bayesian estimation, an object tracking method based on a new Interdistance Joint Compatibility Branch and Bound (IJCBB) algorithm is proposed. The paper studies the recognition performance depending on: (1) the point feature descriptor used, (2) the use (or not) of Bayesian estimation and (3) the inclusion of semantic information about the objects connections. The methods are tested using an experimental dataset containing laser scans and Autonomous Underwater Vehicle (AUV) navigation data. The best results are obtained using the Clustered Viewpoint Feature Histogram (CVFH) descriptor, achieving recognition rates of 51.2%, 68.6% and 90%, respectively, clearly showing the advantages of using the Bayesian estimation (18% increase) and the inclusion of semantic information (21% further increase), This work was supported by the Spanish Government through a FPI Ph.D. grant to K. Himri, as well as by the Spanish Project DPI2017-86372-C3-2-R (TWINBOT-GIRONA1000) and the H2020-INFRAIA-2017-1-twostage-731103 (EUMR)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

3D Object Recognition Based on Point Clouds in Underwater Environment with Global Descriptors: A Survey

  • Himri, Khadidja
  • Ridao Rodríguez, Pere
  • Grácias, Nuno Ricardo Estrela
This paper addresses the problem of object recognition from colorless 3D point clouds in underwater environments. It presents a performance comparison of state-of-the-art global descriptors, which are readily available as open source code. The studied methods are intended to assist Autonomous Underwater Vehicles (AUVs) in performing autonomous interventions in underwater Inspection, Maintenance and Repair (IMR) applications. A set of test objects were chosen as being representative of IMR applications whose shape is typically known a priori. As such, CAD models were used to create virtual views of the objects under realistic conditions of added noise and varying resolution. Extensive experiments were conducted from both virtual scans and from real data collected with an AUV equipped with a fast laser sensor developed in our research centre. The underwater testing was conducted from a moving platform, which can create deformations in the perceived shape of the objects. These effects are considerably more difficult to correct than in above-water counterparts, and therefore may affect the performance of the descriptor. Among other conclusions, the testing we conducted illustrated the importance of matching the resolution of the database scans and test scans, as this significantly impacted the performance of all descriptors except one. This paper contributes to the state-of-the-art as being the first work on the comparison and performance evaluation of methods for underwater object recognition. It is also the first effort using comparison of methods for data acquired with a free floating underwater platform, This work was supported by the Spanish Government through a FPI Ph.D. grant to K. Himri, as well as by the Spanish Project DPI2017-86372-C3-2-R (TWINBOT-GIRONA1000) and the H2020-INFRAIA-2017-1-twostage-731103 (EUMR)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Semantic mapping for autonomous subsea intervention

  • Vallicrosa Massaguer, Guillem
  • Himri, Khadidja
  • Ridao Rodríguez, Pere
  • Grácias, Nuno Ricardo Estrela
This paper presents a method to build a semantic map to assist an underwater vehicle-manipulator system in performing intervention tasks autonomously in a submerged man-made pipe structure. The method is based on the integration of feature-based simultaneous localization and mapping (SLAM) and 3D object recognition using a database of a priori known objects. The robot uses Doppler velocity log (DVL), pressure, and attitude and heading reference system (AHRS) sensors for navigation and is equipped with a laser scanner providing non-coloured 3D point clouds of the inspected structure in real time. The object recognition module recognises the pipes and objects within the scan and passes them to the SLAM, which adds them to the map if not yet observed. Otherwise, it uses them to correct the map and the robot navigation if they were already mapped. The SLAM provides a consistent map and a drift-less navigation. Moreover, it provides a global identifier for every observed object instance and its pipe connectivity. This information is fed back to the object recognition module, where it is used to estimate the object classes using Bayesian techniques over the set of those object classes which are compatible in terms of pipe connectivity. This allows fusing of all the already available object observations to improve recognition. The outcome of the process is a semantic map made of pipes connected through valves, elbows and tees conforming to the real structure. Knowing the class and the position of objects will enable high-level manipulation commands in the near future, This work was supported by the Spanish Government through a FPI Ph.D. grant to K. Himri, as well as by the Spanish Project DPI2017-86372-C3-2-R (TWINBOT-GIRONA1000) and the European project H2020-INFRAIA-2017-1-twostage-731103 (EUMarineRobots)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

State of the Art of Underwater Active Optical 3D Scanners

  • Castillón, Miguel
  • Palomer Vila, Albert
  • Forest Collado, Josep
  • Ridao Rodríguez, Pere
Underwater inspection, maintenance and repair (IMR) operations are being increasingly robotized in order to reduce safety issues and costs. These robotic systems rely on vision sensors to perform fundamental tasks, such as navigation and object recognition and manipulation. Especially, active optical 3D scanners are commonly used due to the domain-specific challenges of underwater imaging. This paper presents an exhaustive survey on the state of the art of optical 3D underwater scanners. A literature review on light projection and light-sensing technologies is presented. Moreover, quantitative performance comparisons of underwater 3D scanners present in the literature and commercial products are carried out, This research was funded by the GIRONA1000 project (grant number DPI2017-86372-C3-2-R, by the Spanish Ministry of Science) and EUMR project (grant number H2020-INFRAIA-2017-1-twostage-731103, by the European Commission).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Model-Validation and Implementation of a Path-Following Algorithm in an Autonomous Underwater Vehicle

  • Villa, Jose
  • Vallicrosa Massaguer, Guillem
  • Aaltonen, Jussi
  • Ridao Rodríguez, Pere
  • Koskinen, Kari T.
This article studies the design, modeling, and implementation of a path-following algorithm as a guidance, navigation, and control (GNC) architecture for an autonomous underwater vehicle (AUV). First, a mathematical model is developed based on nonlinear equations of motion and parameter estimation techniques, including the model validation based on field test data. Then, the guidance system incorporates a line-of-sight (LOS) algorithm with a combination of position PID controllers. The GNC architecture includes a modular and multi-layer approach with an LOS-based, path-following algorithm in the AUV platform. Furthermore, the navigation used in the path-following algorithm is developed based on a predefined coverage area. Finally, this study addresses simulation and field test control scenarios to verify the developed GNC architecture, This research was funded by the project MOCAV-G500 from EUMarineRobots that has received funding from the European Union’s Horizon 2020 (grant agreement No 731103), with the collaboration of the aColor project, which is funded by Technology Industries of Finland Centennial and Jane & Aatos Erkko Foundations