Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature dependence mitigation in stationary Fourier-transform on-chip spectrometers

  • Herrero-Bermello, A.
  • Velasco, Aitor V.
  • Podmore, Hugh
  • Cheben, Pavel
  • Schmid, Jens H.
  • Janz, S.
  • Calvo, María L.
  • Xu, Dan-Xia
  • Scott, Alan
  • Corredera, Pedro
4 pags., 5 figs., We present two techniques for mitigating the effects of temperature drifts in waveguide spatial heterodyne Fourier-transform on-chip spectrometers. In high-resolution devices, large optical path length differences result in an increased sensitivity to temperature variations and impose stringent requirements on the thermal stabilization system. In order to overcome this limitation, here we experimentally demonstrate two new temperature mitigation techniques based on a temperature-sensitive calibration and phase error correction. The spectrometer chip under analysis comprises an array of 32 Mach¿Zehnder interferometers fabricated on a silicon-on-insulator platform. The optical path delays are implemented as microphotonic spirals of linearly increasing length up to 3.779 cm, yielding a spectral resolution of 17 pm. We demonstrate that the degradation in retrieved spectra caused by temperature drift is effectively eliminated by temperature-sensitive calibration and phase error correction., Ministerio de Economía y Competitividad (MINECO) (FJCI-2014-22836, TEC2015-71127-C2-1-R, TEC2015-71127-C2-2-R); Comunidad de Madrid (S2013/ MIT-2790); EURAMET (H2020-MSCA-RISE-2016: SENSIBLE); EMPIR Programme (JRP-i22 14IND13- PhotInd); National Research Council Canada (NRC); Horizon 2020 Framework Programme (H2020) (734331)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Calibración de la resolución espacial y el error de medida en sensores distribuidos de temperatura sobre fibra óptica

  • Herrero-Bermello, A.
  • Miguel, José Luis de
  • Velasco, Aitor V.
  • Galindo Santos, Juan
  • Corredera, Pedro
San Fernando (Cádiz), 6, 7, 8 y 9 de junio de 2017. -- http://www.congresodemetrologia.es/, En este trabajo se presenta una técnica de fácil implementación para la calibración de sensores distribuidos sobre fibra óptica, capaz de caracterizar simultáneamente la resolución espacial y el error de medida. El método se basa en el uso de dos receptáculos de agua independientes de temperatura controlada. En el primero, más cercano al equipo interrogador, se caracteriza el error e incertidumbre de medida mediante un carrete de elevada longitud en ambiente controlado. En el segundo, ubicado en el límite del rango de medida, se introducen segmentos de fibra de longitud variable para verificación de resolución. La técnica propuesta se ejemplifica con la calibración experimental de un equipo comercial DTS basado en Raman espontáneo con resolución espacial teórica menor de 0.9 m y un rango de distancia de medida de 2 km., Este trabajo está financiado por el Ministerio de Economía y competitividad (MINECO) de España a través de los proyectos TEC2015-71127-C2-1-R y TEC2015-71127-C2-2-R, la Comunidad de Madrid (programa SINFOTON-CM S2013/MIT-2790), y EURAMET a través del proyectos JRPi22 14IND13-PhotInd y el programa de investigación e innovación del Horizonte 2020 de la Unión Europea a través del proyecto Marie Sklodowska-Curie No. 734331 (SENSIBLE). La iniciativa EMPIR está co-financiada por los países participantes y el programa de investigación e innovación del Horizonte 2020 de la Unión Europea. Aitor V. Velasco agradece al MINECO el contrato FJCI-2014-22836., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-Broadband Mode Converter and Multiplexer Based on Sub-Wavelength Structures

  • González-Andrade, D.
  • Wangüemert-Pérez, J. G.
  • Velasco, Aitor V.
  • Ortega-Moñux, A.
  • Herrero-Bermello, A.
  • Molina-Fernández, Iñigo
  • Halir, R.
  • Cheben, Pavel
11 pags., 9 figs., Current bandwidth capacity provided by wavelength-division multiplexing and polarization-division multiplexing is insufficient to keep up with the increasing bandwidth demand required for new services. Mode-division multiplexing technology paves the way to further increase transmission and bandwidth capacities in photonic interconnects. In this work, we propose an ultra-broadband two-mode converter and de/multiplexer based on a sub-wavelength engineered multimode interference coupler, a 90° phase shifter, and a symmetric Y-junction for the silicon-on-insulator platform. Sub-wavelength grating waveguides enable dispersion engineering to further increase the bandwidth operation of conventional multimode interference coupler and, subsequently, of mode de/multiplexer based on them. Full three-dimensional simulations of the designed mode converter and de/multiplexer show insertion loss below than 0.84 dB and crosstalk lower than -20 dB over an unprecedented bandwidth of 300 nm (1.4-1.7 μm). The overall footprint of the proposed device is only 36 μ m × 3.7 μm., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant TEC2015-71127-C2-1-R (FPI scholarship BES-2016-077798), Grant TEC2016-80718-R, and Grant IJCI-2016-30484, in part by the Community of Madrid under Grant S2013/MIT-2790, in part by the EMPIR program (JRP-i22 14IND13 Photind), co-financed by the participating countries and the European Union’s Horizon 2020 research and innovation program, and in part by the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant 734331, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polarization- and wavelengthagnostic nanophotonic beam splitter

  • González-Andrade, D.
  • Lafforgue, Christian
  • Durán-Valdeiglesias, Elena
  • Le Roux, Xavier
  • Berciano, Mathias
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Velasco, Aitor V.
  • Cheben, Pavel
  • Vivien, Laurent
  • Alonso-Ramos, Carlos
9 pags., 6 figs., 1 tab., High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of silicon-on-insulator platforms, state-of-the-art nanophotonic splitters are hampered by trade-offs in bandwidth, polarization dependence and sensitivity to fabrication errors. Here, we present a new strategy that exploits modal engineering in slotted waveguides to overcome these limitations, enabling ultra-broadband polarization-insensitive optical power splitters with relaxed fabrication tolerances. The proposed splitter design relies on a single-mode slot waveguide that is gradually transformed into two strip waveguides by a symmetric taper, yielding equal power splitting. Based on this concept, we experimentally demonstrate −3 ± 0.5 dB polarization-independent transmission for an unprecedented 390 nm bandwidth (1260–1650 nm), even in the presence of waveguide width deviations as large as ±25 nm., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities under grants TEC2015-71127-C2-1-R (FPI scholarship BES-2016-077798) and IJCI-2016-30484; and the Community of Madrid (S2013/MIT-2790). This project has received funding from the EMPIR program (JRP-i22 14IND13 Photind), co-financed by the participating countries and the European Union’s Horizon 2020 research and innovation program; and from the Horizon 2020 research and innovation program under the Marie Sklodowska- Curie Grant No. 734331. This work has been partially funded by the Agence National pour la Recherche, Project MIRSPEC (ANR-17-CE09-0041) and the H2020 European Research Council (ERC) (ERC POPSTAR 647342). The sample fabrication has been performed at the Plateforme de Micro-Nano-Technologie/C2N, which is partially funded by the “Conseil Général de l’Éssonne”. This work was partly supported by the French RENATECH network., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design of a Broadband Polarization Splitter Based on Anisotropy-Engineered Tilted Subwavelength Gratings

  • Herrero-Bermello, A.
  • Luque-González, José Manuel
  • Velasco, Aitor V.
  • Ortega-Moñux, A.
  • Cheben, Pavel
  • Halir, R.
Polarization management is of paramount importance in integrated optics, particularly for highly birefringent photonic platforms such as silicon-on-insulator. In this paper, we present a polarization beam splitter based on amultimode interference coupler incorporating tilted subwavelength gratings. The tilt provides accurate control of the structural anisotropy and enables independent selection of the beat length for two orthogonal polarization states. As a result, device length is reduced to less than 100 μm while simultaneously achieving broadband operation through subwavelength grating dispersion engineering. Insertion losses below 1 dB and an extinction ratio higher than 20 dB are demonstrated through three-dimensional FDTD simulation in a 131-nm bandwidth., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities under Grants TEC2016-80718-R, TEC2015- 71127-C2-1-R (FPU scholarship 16/06762), and IJCI-2016-30484; in part by the Community of Madrid under Grant S2018/NMT-4326, and in part by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie under Grant 734331., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-chip Fourier-transform spectrometers and machine learning: a new route to smart photonic sensors

  • Herrero-Bermello, A.
  • Li, Jiangfeng
  • Khazaei, Mohammad
  • Grinberg, Yuri
  • Velasco, Aitor V.
  • Vachon, Martin
  • Cheben, Pavel
  • Stankovic, Lina
  • Stankovic,Vladimir
  • Xu, Dan-Xia
  • Schmid, Jens H.
  • Alonso-Ramosa, Carlos
4 pags., 4 figs., 2 tabs., Miniaturized silicon photonics spectrometers capable of detecting specific absorption features have great potential for mass market applications in medicine, environmental monitoring, and hazard detection.However, state-of-the-art silicon spectrometers are limited by fabrication imperfections and environmental conditions, especially temperature variations, since uncontrolled temperature drifts of only 0.1 C distort the retrieved spectrum precluding the detection and classification of the absorption features. Here we present a new strategy that exploits the robustness of machine learning algorithms to signal imperfections, enabling recognition of specific absorption features in a wide range of environmental conditions. We combine onchip spatial heterodyne Fourier-transform spectrometers and supervised learning to classify different input spectra in the presence of fabrication errors, without temperature stabilization or monitoring. We experimentally show the differentiation of four different input spectra under an uncontrolled 10 C range of temperatures, about 100 increase in operational range, with a success rate up to 82.5% using state-of-the-art support vector machines and artificial neural networks., Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (IJCI-2016-30484, RTI2018-097957-B-C33); Comunidad de Madrid (S2018/NMT-4326); Horizon 2020 Framework Programme (Marie Sklodowska-Curie RISE Action 734331); Project MIRSPEC(ANR-17-CE09-0041)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-wideband dual-polarization silicon nitride power splitter based on modal engineered slot waveguides

  • González-Andrade, D.
  • Guerber, Sylvain
  • Durán-Valdeiglesias, Elena
  • Pérez-Galacho, Diego
  • Le Roux, Xavier
  • Vulliet, Nathalie
  • Cremer, Sébastien
  • Monfray, Stephane
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Boeuf, Frédéric
  • Cheben, Pavel
  • Vivien, Laurent
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 4 figs., 1 tab., Silicon nitride (SiN) waveguides provide a substantially lower index contrast, thermo-optic coefficient, and reduced birefringence compared to silicon-on-insulator waveguides. These properties make SiN a prominent candidate for implementation of ultra-wideband dual-polarization photonics circuits with a great potential for datacom applications. State-of-the-art SiN power splitters are still hampered in terms of either bandwidth or single-polarization operation. Here, we propose to overcome these limitations by exploiting modal and waveguide symmetry engineering in a single-mode slot waveguide. This topology prevents mode-beating, while granting symmetric power splitting for both polarizations. Experimental characterization of the fabricated device shows low loss (<0.62dB) and imbalance (<0.6dB) within an unprecedented bandwidth of 420 nm (1.26–1.68 µm)., Spanish Ministry of Science, Innovation and Universities (MICINN) (IJCI-2016-30484, RTI2018- 097957-B-C33, TEC2015-71127-C2-1-R with FPI scholarship BES-2016-077798); Comunidad de Madrid - FEDER funds (S2018/NMT-4326); Horizon 2020 Framework Programme (Marie Sklodowska-Curie 734331); H2020 European Research Council (ERC POPSTAR 647342); European Commission (H2020-ICT-26127-2017 COSMICC 688516); French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09-0041)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental demonstration of a broadband mode converter and multiplexer based on subwavelength grating waveguides

  • González-Andrade, D.
  • Dias, A.
  • Wangüemert-Pérez, J. G.
  • Ortega-Moñux, Alejandro
  • Molina-Fernández, Iñigo
  • Halir, Robert
  • Cheben, Pavel
  • Velasco, Aitor V.
5 pags., 4 figs., 2 tabs., Mode-division multiplexing is a promising solution to enhance the capacity of current photonic integrated circuits and thereby meet the growing demands of telecom and datacom applications. Here, we experimentally demonstrate for the first time, to the best of our knowledge, a compact and broadband mode converter and multiplexer based on a subwavelength engineered multimode interference coupler. Our device was fabricated on a standard 220-nm-thick silicon-on-insulator platform with a small footprint of 38.6 ⨯ 3.7 µm2. Experimental results for a complete back-to-back multiplexer-demultiplexer link show an insertion loss <1.1 dB (0.55 dB per device) and crosstalk better than −18 dB for both TE0 and TE1 modes in a 120 nm bandwidth (1.52–1.64 µm)., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities (MICINN) under grants CDTI SNEO-20181232 (Alcyon Photonics S.L.), TEC2015-71127-C2-1-R (FPI scholarship BES-2016-077798), TEC2016-80718-R, IJCI-2016-30484 and RTI2018-097957-B-C33; and the Community of Madrid - FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant No. 734331., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Dual-polarization ultra-wideband nanophotonic beamsplitter

  • González-Andrade, D.
  • Lafforgue, Christian
  • Durán-Valdeiglesias, Elena
  • Le Roux, Xavier
  • Berciano, Mathias
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Velasco, Aitor V.
  • Cheben, Pavel
  • Vivien, Laurent
  • Alonso-Ramos, Carlos
ECIO 2019,Ghent University, Ghent, Belgium, 24 April 2019, High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, the performance of state-of-the-art silicon nanophotonic splitters is limited in terms of bandwidth and polarization dependence. Here, we present a new beam splitter approach that exploits modal engineering in slotted waveguides to overcome these limitations, enabling ultra-broadband polarization-insensitive optical power splitting. The proposed splitter relies on a single-mode slot waveguide that is gradually transformed into two strip waveguides by a symmetric taper, yielding equal power splitting. Based on this concept, we experimentally demonstrate insertion loss and power imbalance lower than 1 dB for both, transverse-electric (TE) and transverse-magnetic (TM) polarizations in an unprecedented bandwidth of 390 nm (1260 - 1650 nm)., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities under grants TEC2015-71127-C2-1-R (FPI scholarship BES-2016-077798) and IJCI-2016-30484; and the Community of Madrid (P2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331. This work has been partially funded by the Agence National pour la Recherche, Project MIRSPEC (ANR-17-CE09-0041) and the H2020 European Research Council (ERC) (ERC POPSTAR 647342).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

High performance silicon photonic devices based on practical metamaterials

  • Halir, Robert
  • Luque-González, José Manuel
  • Herrero-Bermello, A.
  • González-Andrade, D.
  • Hadij-El-Houati, Abdelfettah
  • Leuermann, Jonas
  • Pereira-Martín, Daniel
  • Ortega-Moñux, Alejandro
  • Čtyroký, Jiří
  • Wangüemert-Pérez, Gonzalo
  • Velasco, Aitor V.
  • Sánchez-Rodríguez, Marina
  • Oliva-Rubio, José de
  • Schmind, Jens H.
  • Soler Penadés, Jordi
  • Nedeljkovic, Milos
  • Mashanovich, Goran Z.
  • Cheben, Pavel
  • Molina-Fernández, Iñigo
  • Sánchez-Postigo, Alejandro
OECC / PSC, Fukuoka, Japan, Japan, 7-11 July 2019, Subwavelength grating metamaterials are enabling a new generation of high-performance silicon photonic devices. Here we discuss the fundamental physics along with some of the latest advances in this rapidly expanding field., Funding: Ministerio de Economía y Competitividad, Programa Estatal de Investigación Orientada a los Retos de la Sociedad (cofinanciado FEDER) – TEC2016-80718-R, TEC2015-71127-C2-1-R (FPI BES-2016-077798) and IJCI-2016-30484; Community of Madrid – S2018/NMT-4326, Marie Sklodowska-Curie –734331, Universidad de Málaga, Czech Science Foundation – 1900062S.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental demonstration of metamaterial anisotropy engineering for broadband on-chip polarization beam splitting

  • Herrero-Bermello, A.
  • Dias, A.
  • Luque-González, José Manuel
  • Ortega-Moñux, Alejandro
  • Velasco, Aitor V.
  • Cheben, Pavel
  • Halir, Robert
9 pags., 4 figs., 1 tab., Subwavelength metamaterials exhibit a strong anisotropy that can be leveraged to implement high-performance polarization handling devices in silicon-on-insulator. Whereas these devices benefit from single-etch step fabrication, many of them require small feature sizes or specialized cladding materials. The anisotropic response of subwavelength metamaterials can be further engineered by tilting its constituent elements away from the optical axis, providing an additional degree of freedom in the design. In this work, we demonstrate this feature through the design, fabrication and experimental characterization of a robust multimode interference polarization beam splitter based on tilted subwavelength gratings. A 110-nm minimum feature size and a standard silicon dioxide cladding are maintained. The resulting device exhibits insertion loss as low as 1 dB, an extinction ratio better than 13 dB in a 120-nm bandwidth, and robust tolerances to fabrication deviations., Junta de Andalucía (UMA18-FEDERJA-219); Ministerio de Ciencia, Innovación y Universidades (FPU16/06762, IJCI-2016-30484, RTI2018-097957-B-C33, TEC2016-80718-R); Comunidad de Madrid (S2018/NMT-4326); Horizon 2020 Framework Programme (Marie Sklodowska-Curie RISE Action 734331); Universidad de Málaga; Alcyon Photonics S.L. (NEOTEC-CDTISNEO20181232)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Y-junction power splitter engineered through subwavelength metamaterials

  • Fernández de Cabo, Raquel
  • González-Andrade, D.
  • Velasco, Aitor V.
2020 IEEE Photonics Conference (IPC), Vancouver, BC, Canada, 28 Sept.-1 Oct. 2020, We present a Y-junction beam-splitter based on subwavelength metamaterials that mitigates losses associated with the fabrication limitations in the tip size of conventional Y-junctions. Simulations show minimal losses under 0.5 dB for TE 0 and TE 1 modes in a 300 nm range (1300 - 1600 nm)., This work has been funded in part by the Spanish Ministry of Science, Innovation and Universities (MICINN) under grants RTI2018-097957-B-C33 and TEC2015- 71127-C2-1-R (FPI BES-2016-077798) and the Community of Madrid – FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under Marie Sklodowska-Curie grant No. 734331.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A broadband polarization splitter directional coupler based on tilted subwavelengh grating metamaterials

  • Luque-González, José Manuel
  • Herrero-Bermello, A.
  • Ortega-Moñux, Alejandro
  • Sánchez-Rodríguez, Marina
  • Velasco, Aitor V.
  • Schmid, Jens H.
  • Cheben, Pavel
  • Molina-Fernández, Iñigo
  • Halir, Robert
IEEE Photonics Conference (IPC), Vancouver, BC, Canada, 28 Sept.-1 Oct. 2020, Tilted subwavelength gratings (SWG) allows anisotropy tailorable metamaterials with applications in polarization management. Based on this concept, here we experimentally demonstrate a broadband directional-coupler-based polarization beam splitter with sub-decibel insertion loss in a 100 nm bandwidth., Universidad de Málaga; Ministerio de Economía y Competitividad (MINECO) (TEC2016-80718-R); Ministerio de Educación, Cultura y Deporte (MECD) (FPU16/06762), Fondo Europeo de Desarrollo Regional—FEDER, Proyecto I+D+i en el marco del Programa Operativo FEDER Andalucía 2014-2020 (UMA18-FEDERJA-219), Spanish Ministry of Science, Innovation and Universities (MICINN) under grants CDTI SNEO-20181232 (Alcyon Photonics S.L.) and RTI2018-097957-B-C33; Community of Madrid – FEDER funds (S2018/NMT-4326); Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Silicon Subwavelength Structures: Practical Metamaterials for Communications and Sensing

  • Halir, R.
  • Herrero-Bermello, A.
  • Luque-González, J.M.
  • González-Andrade, D.
  • Leuermann, J.
  • Sánchez-Postigo, A.
  • Hadij-El-Houati, Abdelfettah
  • Pereira-Martín, D.
  • Oliva-Rubio, José de
  • Wangüemert-Pérez, J.G.
  • Ortega-Moñux, A.
  • Schmid, Jens H.
  • Velasco, Aitor V.
  • Dias, A.
  • Čtyroký, Jiří
  • Nedeljkovic, M.
  • Mashanovich, Goran Z.
  • Cheben, Pavel
  • Molina-Pérez, Í
OSA Advanced Photonics Congress ¿ Integrated Photonics Research, Silicon and Nanophotonics, Washington, DC United States, 13–16 July 2020, In this invited talk we review the latest advances in the surging field of photonic subwavelength metamaterials. These structures can provide enhanced, device-specific material properties and find widespread application in silicon photonics, We acknowledge funding through Universidad de Málaga, Ministerio de Economía y Competitividad (TEC2016- 80718-R, CDTI SNEO-20181232, RTI2018-097957-B-C33), Ministerio de Educación, Cultura y Deporte (FPU16/06762, FPU16/03401, FPU17/00638), Proyecto I+D+i en el marco del Programa Operativo FEDER Andalucía 2014-2020 (UMA18-FEDERJA-219), Czech Science Foundation (Project 190062S), Alcyon Photonics (8.06/5.59.5045), the Community of Madrid – FEDER funds (S2018/NMT-4326), the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-performance on-chip silicon beamsplitter based on subwavelength metamaterials for enhanced fabrication tolerance

  • Fernández de Cabo, Raquel
  • González-Andrade, D.
  • Cheben, Pavel
  • Velasco, Aitor V.
11 pags., 7 figs., 2 tabs. -- This article belongs to the Special Issue Silicon Photonics: Synthesis and Applications, Efficient power splitting is a fundamental functionality in silicon photonic integrated circuits, but state-of-the-art power-division architectures are hampered by limited operational bandwidth, high sensitivity to fabrication errors or large footprints. In particular, traditional Y-junction power splitters suffer from fundamental mode losses due to limited fabrication resolution near the junction tip. In order to circumvent this limitation, we propose a new type of high-performance Y-junction power splitter that incorporates subwavelength metamaterials. Full three-dimensional simulations show a fundamental mode excess loss below 0.1 dB in an ultra-broad bandwidth of 300 nm (1400–1700 nm) when optimized for a fabrication resolution of 50 nm, and under 0.3 dB in a 350 nm extended bandwidth (1350–1700 nm) for a 100 nm resolution. Moreover, analysis of fabrication tolerances shows robust operation for the fundamental mode to etching errors up to ±20 nm. A proof-of-concept device provides an initial validation of its operation principle, showing experimental excess losses lower than 0.2 dB in a 195 nm bandwidth for the best-case resolution scenario (i.e., 50 nm)., This work has been funded in part by the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018-097957-B-C33, RED2018-102768-T and TEC2015-71127-C2-1-R (FPI BES-2016-077798) and the Community of Madrid—FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under Marie SklodowskaCurie grant No. 734331., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Broadband Fourier-transform silicon nitride spectrometer with wide-area multiaperture input

  • González-Andrade, D.
  • Dinh, T.T.D.
  • Guerber, Sylvain
  • Vulliet, Nathalie
  • Cremer, Sébastien
  • Monfray, Stephane
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Boeuf, Frédéric
  • Cheben, Pavel
  • Vivien, Laurent
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 5 figs., Integrated microspectrometers implemented in silicon photonic chips have gathered a great interest for diverse applications such as biological analysis, environmental monitoring, and remote sensing. These applications often demand high spectral resolution, broad operational bandwidth, and large optical throughput. Spatial heterodyne Fourier-transform (SHFT) spectrometers have been proposed to overcome the limited optical throughput of dispersive and speckle-based on-chip spectrometers. However, state-of-the-art SHFT spectrometers in near-infrared achieve large optical throughput only within a narrow operational bandwidth. Here we demonstrate for the first time, to the best of our knowledge, a broadband silicon nitride SHFT spectrometer with the largest light collecting multiaperture input (320 × 410 µm) ever implemented in an SHFT on-chip spectrometer. The device was fabricated using 248 nm deep-ultraviolet lithography, exhibiting over 13 dB of optical throughput improvement compared to a single-aperture device. The measured resolution varies between 29 and 49 pm within the 1260-1600 nm wavelength range., Spanish Ministry of Science and Innovation (MICINN) (RED2018-102768-T, RTI2018-097957-B-C33, TEC2015-71127-C2-1-R (FPI Scholarship BES-2016-077798)); Community of Madrid-FEDER funds (S2018/NMT-4326); Horizon 2020 Research and Innovation Program (Marie Sklodowska-Curie 734331); H2020 European Research Council (ERC POPSTAR 647342); European Commission (H2020- ICT-26127-2017 COSMICC 688516); French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09-0041
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mode Converter and Multiplexer with a Subwavelength Phase Shifter for Extended Broadband Operation

  • González-Andrade, D.
  • Fernández de Cabo, Raquel
  • Vilas, Jaime
  • Olivares, Irene
  • Dias, A.
  • Luque-González, José Manuel
  • Wangüemert-Pérez, J.G.
  • Ortega-Moñux, Alejandro
  • Molina-Fernández, Iñigo
  • Halir, Robert
  • Cheben, Pavel
  • Velasco, Aitor V.
4 pags., 3 figs., 1 tab., On-chip mode converters and multiplexers are fundamental components to scale the capacity of silicon optical interconnects by using different spatial modes of waveguides. Recently, we proposed a low loss and compact mode converter and multiplexer consisting of a subwavelength-engineered multimode interference coupler, tapered waveguides as phase shifter and a symmetric Y-junction. However, the narrow spectral response of the tapered phase shifter limited the device crosstalk performance. In this work, we demonstrate that the use of a subwavelength grating phase shifter with low phase-shift errors substantially reduces the crosstalk and expands the operational bandwidth. A complete multiplexer-demultiplexer link consisting of two devices in back-to-back configuration was fabricated in a 220-nm silicon-on-insulator platform. Experimental measurements of the complete link show insertion loss below 2 dB and crosstalk less than -17 dB over a bandwidth of 245 nm (1427 - 1672 nm)., is work was supported in part by the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018- 097957-B-C33, RED2018-102768-T, TEC2015-71127-C2-1-R (FPI BES- 2016-077798) and NEOTEC-CDTI-SNEO20181232 (Alcyon Photonics S.L.); and the Community of Madrid – FEDER funds (S2018/NMT-4326). This project has received funding from the Horizon 2020 research and innovation program under Marie Sklodowska-Curie grant No. 734331
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dual-band fiber-chip grating coupler in a 300 mm silicon-on-insulator platform and 193 nm deep-UV lithography

  • González-Andrade, D.
  • Pérez-Galacho, Diego
  • Montesinos-Ballester, Miguel
  • Le Roux, Xavier
  • Cassan, Eric
  • Marris-Morini, Delphine
  • Cheben, Pavel
  • Vulliet, Nathalie
  • Monfray, Stephane
  • Boeuf, Frédéric
  • Vivien, Laurent
  • Velasco, Aitor V.
  • Alonso-Ramos, Carlos
4 pags., 5 figs., 1 tab., Surface grating couplers are fundamental building blocks for coupling the light between optical fibers and integrated photonic devices. However, the operational bandwidth of conventional grating couplers is intrinsically limited by their wavelength-dependent radiation angle. The few dual-band grating couplers that have been experimentally demonstrated exhibit low coupling efficiencies and rely on complex fabrication processes. Here we demonstrate for the first time, to the best of our knowledge, the realization of an efficient dual-band grating coupler fabricated using 193 nm deep-ultraviolet lithography for 10 Gbit symmetric passive optical networks. The footprint of the device is 17 × 10 µm. We measured coupling efficiencies of −4.9 and −5.2 dB with a 3-dB bandwidth of 27 and 56 nm at the wavelengths of 1270 and 1577 nm, corresponding to the upstream and downstream channels, respectively., Spanish Ministry of Science, Innovation and Universities (MICINN) (RTI2018-097957-B-C33, TEC2015-71127-C2-1-R with FPI Scholarship BES-2016-077798); Community of Madrid - FEDER funds (S2018/NMT-4326); Horizon 2020 Research and Innovation Program (Marie Sklodowska-Curie 734331); H2020 European Research Council (ERC POPSTAR 647342); European Commission (H2020- ICT-26127-2017 COSMICC 688516); French Industry Ministry (Nano2022 project under IPCEI program); Agence Nationale de la Recherche (ANR-MIRSPEC-17-CE09-0041).