Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

The effects of water absorption and salt fog exposure on agglomerated cork compressive response

  • Sergi, Claudia
  • Sarasini, Fabrizio
  • Fiori, Vincenzo
  • Barbero Pozuelo, Enrique
  • Sánchez Sáez, Sonia
  • Tirillò, Jacopo
The replacement of synthetic foams with agglomerated cork in sandwich composites can meet the increasing environmental concerns. Its peculiar morphology and chemical composition lead to outstanding dimensional recovery that endorsed a broad investigation of its compressive behavior. The knowledge of neat material response is fundamental to obtain a reliable design dataset, but it is necessary to consider all the environmental factors (water, moisture and sunlight) that significantly modify material mechanical properties. In view of this, the present work investigates the effect of distilled and seawater absorption and salt fog exposure on the compressive behavior of two agglomerated corks with different densities to simulate their potential employment in marine environment. The results were suitably compared with the ones of a traditional PVC foam used as benchmark. A dependence of water uptake and diffusivity on cork density and water type was detected. The less dense cork displayed a water uptake between 36.7 and 46.5% higher than the denser cork, and seawater uptake was between 21.8 and 44.4% lower than distilled water one. Concerning the compressive response, water and fog moisture plasticizing effect in wet conditions and a partial healing after drying due to salt crystal deposits were identified. Water plasticizing effect determined a reduction in the compressive modulus between 35.1 and 37.9% for the lighter cork and between 17.7 and 21% for the denser cork whereas fog moisture induced a reduction between 52 and 74% for the lighter cork and between 24 and 76.1% for the denser one., Part of this work was implemented within the co-creation experiment at Sapienza Università di Roma in the framework of the H2020 project FIT4RRI, G.A. n. 741477. This project received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 741477. The APC was funded by the project FIT4RRI., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

The Potential of Agglomerated Cork for Sandwich Structures: A Systematic Investigation of Physical, Thermal, and Mechanical Properties

  • Sergi, Claudia
  • Tirillò, Jacopo
  • Sarasini, Fabrizio
  • Barbero Pozuelo, Enrique
  • Sánchez Sáez, Sonia
  • Burgstaller, Christoph
Considering the major role played by sandwich structures in many fields where high stiffness-to-weight ratio is required, the selection of a suitable core material is of paramount importance. In order to face the environmental problems related to waste disposal, the selection of an eco-friendly core material is now included in the design criteria of sandwich structures. Agglomerated cork is recognized as a good solution that combines satisfactory mechanical performances and eco-sustainability. Many research studies individually addressed cork’s morphological, thermal, and mechanical features without providing a comprehensive overview of the relationships that exist between them. In this work, the investigation of the peculiar cork morphology allowed learning more about its good insulation capacity and its impressive recovery capability. The use of dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) clarified the influence of temperature on both flexural and compressive performances. The effect of testing parameters such as temperature and speed on agglomerated cork properties was validated through statistical analysis. Moreover, to highlight agglomerated cork advantages and drawbacks, the work provides also a comparison with more traditional polyvinylchloride (PVC) foams commonly used in industrial applications., Part of this work was implemented within the co-creation experiment at Sapienza Università di Roma in the framework of the H2020 project FIT4RRI, G.A. n. 741477. This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 741477. The APC was funded by the project FIT4RRI.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Experimental and finite element analysis of the impact response of agglomerated cork and its intraply hybrid flax/basalt sandwich structures

  • Sergi, Claudia
  • Boria, Simonetta
  • Sarasini, Fabrizio
  • Russo, Pietro
  • Vitiello, Libera
  • Barbero Pozuelo, Enrique
  • Sánchez Sáez, Sonia
  • Tirilló, Jacopo
Sandwich structures are widespread in all the industrial applications where a high stiffness-to-weight ratio is required. Despite the unique bending performance, they feature two major drawbacks: the massive exploitation of synthetic materials and a strong susceptibility to impact damage. This work addresses both problems, investigating the puncture impact response of bio-based sandwich structures with an agglomerated cork core and intraply flax/basalt hybrid skins. A preliminary campaign of impacts was performed on three agglomerated corks with different densities and on three traditional polyvinyl(chloride) foams with comparable densities. Based upon the results obtained, one agglomerated cork (NL25) and one PVC foam (HP130) were selected to realize a finite element analysis (FEA) on the sole core and to produce the whole sandwich composites. FEA results show a good agreement with experimental ones ensuring a reliable prediction of cores dynamic response. The tests performed on sandwich structures proved the feasibility of agglomerated cork as an effective core, able to provide an improved damage tolerance to the structure. NL25 sandwiches impacted at 20–30 J showed a permanent indentation 60–67% lower than HP130 ones. The coupling agent in skins has a detrimental effect reducing composites perforation threshold from 80 to 60 J., Part of this work was implemented within the co-creation experiment at Sapienza Università di Roma in the framework of the H2020 project FIT4RRI, G.A. n. 741477. This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 741477. The APC was funded by the project FIT4RRI.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Joint declaration on mainstreaming RRI across Horizon Europe

  • Gerber, Alexander
  • Forsberg, Ellen-Marie
  • Shelley-Egan, Clare
  • Arias, Rosa
  • Daimer, Stephanie
  • Dalton, Gordon
  • Cristóbal, Ana Belén
  • Dreyer, Marion
  • Griessler, Erich
  • Lindner, Ralf
  • Revuelta, Gema
  • Riccio, Andrea
  • Steinhaus, Norbert
Leading RRI researchers and practitioners, together with policymakers and stakeholder organisations, discussed the state-of-the-art and future perspectives for RRI at the ‘Pathways to Transformation’ conference in June 2019, an event which was extended beyond Brussels, for instance by ca. 330 original tweets and ca. 840 retweets from ca. 160 unique accounts. In the conference, many participants expressed their concern about an uncertain future for RRI in the EC. As a result, numerous large-scale EU-funded RRI projects signed a Joint Declaration 1 , urging the European Commission to make RRI a key objective of the upcoming framework programme, Horizon Europe – a plea to both mainstream the approach across the programme and provide specific resources for strengthening the RRI knowledge base. As the Horizon Europe programme is being forged, it is timely to present the Declaration for a broader audience., This work was funded by the European Commission (formerly, H2020 Science with and for Society Programme), through the projects NUCLEUS (grant no 664932), RRI-Practice (grant no 709637), D-NOSES (grant no 789315), Fit4RRI (grant no 741477), GRRIP (grant no 820283), HeiRRI (grant no 666004), NewHoRRIzon (grant no 741402), PROSO (grant no 665947), ResAgora (grant no 321427), RRING (grant no 788503), Super-MoRRI (grant no 824671), TeRRIFICA (grant no 824489).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Joint declaration on mainstreaming RRI across Horizon Europe

  • Gerber, Alexander
  • Forsberg, Ellen-Marie
  • Shelley-Egan, Clare
  • Arias, Rosa
  • Daimer, Stephanie
  • Dalton, Gordon
  • Cristóbal, Ana Belén
  • Dreyer, Marion
  • Griessler, Erich
  • Lindner, Ralf
  • Revuelta, Gema
  • Riccio, Andrea
  • Steinhaus, Norbert
Leading RRI researchers and practitioners, together with policymakers and stakeholder organisations, discussed the state-of-the-art and future perspectives for RRI at the ‘Pathways to Transformation’ conference in June 2019, an event which was extended beyond Brussels, for instance by ca. 330 original tweets and ca. 840 retweets from ca. 160 unique accounts. In the conference, many participants expressed their concern about an uncertain future for RRI in the EC. As a result, numerous large-scale EU-funded RRI projects signed a Joint Declaration 1 , urging the European Commission to make RRI a key objective of the upcoming framework programme, Horizon Europe – a plea to both mainstream the approach across the programme and provide specific resources for strengthening the RRI knowledge base. As the Horizon Europe programme is being forged, it is timely to present the Declaration for a broader audience., This work was funded by the European Commission (formerly, H2020 Science with and for Society Programme), through the projects NUCLEUS (grant no 664932), RRI-Practice (grant no 709637), D-NOSES (grant no 789315), Fit4RRI (grant no 741477), GRRIP (grant no 820283), HeiRRI (grant no 666004), NewHoRRIzon (grant no 741402), PROSO (grant no 665947), ResAgora (grant no 321427), RRING (grant no 788503), Super-MoRRI (grant no 824671), TeRRIFICA (grant no 824489).
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Joint declaration on mainstreaming RRI across Horizon Europe