Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Influence of Anion Structure on Thermal, Mechanical and CO2 Solubility Properties of UV-Cross-Linked Poly(ethylene glycol) Diacrylate Iongels

  • Martins, Ana P.S.
  • Fernández De Añastro Arrieta, Asier
  • Olmedo Martínez, Jorge L.
  • Nabais, Ana R.
  • Neves, Luísa A.
  • Mecerreyes Molero, David
  • Tomé, Liliana C.
Iongel-based CO2 separation membranes were prepared by fast (< 1 min) UV-initiated polymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of different ionic liquids (ILs) with the [C2mim]+ cation and anions such as [TFSI]−, [FSI]−, [C(CN)3]− and [B(CN)4]−. The four ILs were completely miscible with the non-ionic PEGDA network. Transparent and free-standing iongels containing between 60 and 90 %wt of IL were obtained and characterized by diverse techniques (FTIR, TGA, DSC, DMTA, SEM, CO2 solubility and pure gas permeability). The thermal and mechanical stability of the iongels, as well as CO2 solubility, were found to be strictly dependent on the IL content and the anion’s nature. The TGA results indicated that the iongels mostly follow the thermal profile of the respective neat ILs. The DMTA analysis revealed that the iongels based on fluorinated anions have higher storage modulus than those of cyano-functionalized anions. Conversely, the PEGDA–C(CN)3 iongels presented the highest CO2 solubility values ranging from 72 to 80 mmol/g. Single CO2 permeabilities of 583 ± 29 Barrer and ideal CO2/N2 selectivities of 66 ± 3 were obtained with the PEGDA–70 C(CN)3 iongel membrane. This work demonstrates that the combination of PEGDA with high contents of the best performing ILs is a promising and simple strategy, opening up new possibilities in the design of high-performance iongel membranes for CO2 separation., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”, and by FCT (Fundação para Ciência e a Tecnologia) through the project PTDC/CTM-POL/2676/2014 and the Associate Laboratory for Green Chemistry - LAQV (UID/QUI/50006/2019). Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734. Jorge L. Olmedo Martínez wish to thank the National Council of Science and Technology (CONACYT) in México for his grant 471837. Ana R. Nabais and Luísa A. Neves are grateful to FCT/MCTES for their PhD grant (SFRH/BD/136963/2018) and FCT Investigador Contract (IF/00505/2014), respectively.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

3D Printable and Biocompatible Iongels for Body Sensor Applications

  • Luque, Gisela C.
  • Picchio, Matías L.
  • Martins, Ana P.S.
  • Domínguez Alfaro, Antonio
  • Ramos Gómez, Nicolás
  • Del Agua López, Isabel
  • Marchiori, Bastien
  • Mecerreyes Molero, David
  • Minari, Roque Javier
  • Tomé, Liliana C.
Soft-ionic materials with biocompatibility and 3D printability are needed to develop next-generation devices to interface between electronic and biological signals. Herein, thermoreversible and biocompatible ionic liquid gels or iongels, which can be processed by direct ink writing are reported. The iongels are designed by taking advantage of polyvinyl alcohol/phenol interactions to gelify biocompatible cholinium carboxylate ionic liquids. The obtained iongels are stable, soft, and flexible materials (Young modulus between 14 and 70 kPa) with high ionic conductivity (1.8 x 10(-2) S cm(-1)). Interestingly, they presented thermoreversible properties with gel-sol transitions ranging from 85 and 110 degrees C, which allows the iongel processing via direct ink writing 3D printing by material extrusion at temperatures over its transition. These 3D printable iongels are integrated into a variety of body sensors applications, namely pressure sensors, motion sensors and electrodes for electrophysiological recordings. The iongels are used as pressure sensors with a sensitivity of 0.1 kPa(-1), ten times higher than that of others similar materials reported so far; showing its ability to detect human motion. Furthermore, the iongels showed excellent performance in electrodes for electrocardiography (ECG) recording, presenting good stability over time with electrocardiographic waves maintained their typical shape even after weeks., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 "IONBIKE". The financial support received from CONICET, UNL, and ANPCyT (Argentina) is also gratefully acknowledged. L.C.T. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie SklodowskaCurie grant agreement no. 745734 and from FCT (Fundacao para a Ciencia e a Tecnologia) in Portugal under the research contract CEECIND/01697/2018.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Imidazolium-based co-poly(ionic liquid) membranes for CO2/N2 separation

  • Pothanagandhi, Nellepalli
  • Tomé, Liliana C.
  • Vijayakrishna, Kari
  • Marrucho, Isabel M.
Unformatted post print, The development of efficient carbon dioxide capture and separation technologies is at the fore front of the priorities in the climate change policies. Poly(ionic liquid)s (PILs) have been emerging as extremely promising materials for the fabrication of membranes for CO2 separation. This work is a step forward to evaluate the performance of PIL-based copolymers in the preparation of membranes for CO2/N2 separation. In particular, imidazolium-based homo and copolymers were synthesized by RAFT co-polymerization of different imidazolium salts and characterized by nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) analysis. The membrane forming ability of the synthesized PILs, as well as the influence of different side chain groups (ethyl, pentyl, benzyl and napthyl) at imidazolium ring, were evaluated using the solvent casting technique. In order to improve membrane forming ability and CO2 separation performance, different amounts of free ionic liquid (IL), [C2mim][NTf2], were added into the synthesized homo and copolymers, and PIL–IL composite membranes were prepared. The CO2 and N2 permeation properties of the obtained free standing PIL–IL membranes were measured at 20 ºC and 100 kPa and the results obtained compared through the Robeson plot., K. Vijayakrishna and N. Pothanagandhi thank “International Research Staff Exchange Scheme (IRSES) 7th Framework of European Union People-2012-IRSES” (Project No: 318873), for exchange programme. K. Vijayakrishna also thank DST-SERB, India (Project NO: SR/S1/OC-22/2012) for the financial support. L.C. Tomé is grateful to FCT (Fundação para a Ciência e a Tecnologia) for her Post-doctoral research grant (SFRH/BPD/101793/2014). This work was supported by FCT through the project PTDC/CTM-POL/2676/2014 and R&D units UID/Multi/04551/2013 (GreenIT) and UID/QUI/00100/2013 (CQE). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 745734.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Emerging Ionic Soft Materials based on Deep Eutectic Solvents

  • Tomé, Liliana C.
  • Mecerreyes Molero, David
Postprint, In the last five years, the use of deep eutectic solvents (DES) have been opening new perspectives towards the creation of novel ionic soft materials as alternatives to expensive ionic liquids. This Mini-Review highlights the progress and advances in soft ionic materials or gels, mostly composed by a DES immobilized within difference matrices, such as linear polymers, polymer networks, biopolymers, supramolecular compounds or organosilane networks. By taking advantage of the DES characteristics and properties in the solid state, this building system delivers a variety of tailor-made materials showing different functionalities (ionic conductivity, self-healing, stretchability and pH-responsiveness) and offers a way to circumvent drawbacks related to shaping and risk of leakage in many technological applications. In this context, we provide a judicious analysis of these emerging ionic soft materials, their properties and applications open in energy, (bio)electronics, drug delivery, analytical chemistry, and wastewater treatment. Perspectives and opportunities for future research directions on this blossoming field are also discussed., Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734. This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) project under the grant agreement No 823989 “IONBIKE”.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico antes de ser publicado, versión del autor (Preprint)

Elastic and Thermoreversible Iongels by Supramolecular PVA/Phenol Interactions, Hyperelastic and Thermoreversible Iongels by Supramolecular PVA/Phenol Interactions

  • Luque, Gisela C.
  • Picchio, Matías L.
  • Martins, Ana P.S.
  • Domínguez Alfaro, Antonio
  • Tomé, Liliana C.
  • Mecerreyes Molero, David
  • Minari, Roque Javier
Unformatted preprint, Iongels have attracted much attention over the years as ion-conducting soft materials for applications in several technologies including stimuli-responsive drug release and flexible (bio)electronics. Nowadays, iongels with additional functionalities such as electronic conductivity, self-healing, thermo-responsiveness or biocompatibility are actively being searched for high demanding applications. In this work, we present a simple and rapid synthetic pathway to prepare hyperelastic and thermoreversible iongels. These iongels were prepared by supramolecular crosslinking between polyphenols biomolecules with a hydroxyl-rich biocompatible polymer such as poly(vinyl alcohol) (PVA) in the presence of ionic liquids. Using this strategy, a variety of iongels were obtained by combining different plant-derived polyphenol compounds such as gallic acid, pyrogallol, and tannic acid with imidazolium-based ionic liquids, namely [C2mim][N(CN)2] and [C2mim][Br]. A suite of characterization tools was used to study the structural, morphological, mechanical, rheological and thermal properties of the supramolecular iongels. These iongels can withstand large deformations (40 % under compression) with full recovery, revealing reversible transitions from solid to liquid state between 87 to 125 °C. Finally, the polyphenol-based thermoreversible iongels shows appropriated properties for their potential application as printable electrolytes for bioelectronics., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”. Also, the financial support received from CONICET, UNL, and ANPCyT (all of Argentina) is gratefully acknowledged. Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico antes de ser publicado, versión del autor (Preprint)

Poly(ionic liquid)-based engineered mixed matrix membranes for CO2/H2 separation

  • Nabais, Ana R.
  • Martins, Ana P.S.
  • Alves, Vítor D.
  • Crespo, Joao G.
  • Marrucho, Isabel M.
  • Tomé, Liliana C.
  • Neves, Luísa A.
Unformatted preprint, Poly(ionic liquid)s (PIL) have emerged as a class of versatile polyelectrolites, that can be used to prepare new materials able to achieve superior performances compared to conventional polymers. The combination of PILs with ionic liquids (ILs) may serve as a suitable matrix for the preparation of membranes for gas separation. In this work, mixed matrix membranes (MMMs) combining a pyrrolidinium-based PIL, an IL and three highly CO2-selective metal organic frameworks (MOFs) were prepared. The different MOFs (MIL-53, Cu3(BTC)2 and ZIF-8) were used as fillers, aiming to maximize the membranes performance towards the purification of syngas. The influence of different MOFs and loadings (0, 10, 20 and 30 wt.%) on the thermal and mechanical stabilities of the membranes and their performance in terms of CO2 permeability and CO2/H2 ideal selectivity was assessed. The compatibility between the materials was confirmed by SEM-EDS and FTIR spectroscopy. The prepared MMMs revealed to be thermally stable within the temperature range of the syngas stream, with a loss of mechanical stability upon the MOF incorporation. The increasing MOF content in the MMMs, resulted in an improvement of both CO2 permeability and CO2/H2 ideal selectivity. Among the three MOFs studied, membranes based on ZIF-8 showed the highest permeabilities (up to 97.2 barrer), while membranes based on MIL-53 showed the highest improvement in selectivity (up to 13.3). Remarkably, all permeation results surpass the upper bound limit for the CO2/H2 separation, showing the membranes potential for the desired gas separation., This work was partially supported by R&D Units UID/Multi/04551/2013 (Green-it), UID/QUI/00100/2013 (CQE), and the Associated Laboratory Research Unit for Green Chemistry, Technologies and Clean Processes, LAQV which is financed by national funds from FCT/MCTES(UID/QUI/50006/2013) and co-financed by the ERDF under the PT2020 Partnership Agreement (POCI-01-0145-FEDER-007265). Ana R. Nabais, Luísa A. Neves and Liliana C. Tomé acknowledge FCT/MCTES for financial support through project PTDC/CTM-POL/2676/2014, FCT Investigator Contract IF/00505/2014 and Post-doctoral research grant SFRH/BDP/101793/2014, respectively. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 745734.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Poly(ionic liquid)–ionic liquid membranes with fluorosulfonyl derived anions: characterization and biohydrogen separation

  • Gouveia, Andreia S.L.
  • Malcaitè, Eglè
  • Lozinskaya, Elena I.
  • Shapl, Alexander S.
  • Tomé, Liliana C.
  • Marrucho, Isabel M.
Unformatted postprint, Clean and sustainable energy production has become a key global issue concerning the world’s energy shortage and environmental problematic. Despite the recognized potential of biohydrogen (bioH2) for sustainable development, there are still issues regarding its production and purification, such as the elimination of CO2, N2, and other impurities (H2O and H2S), so that an enriched H2 stream can be obtained for efficient energy generation. The use of poly(ionic liquid)s (PILs) and their derived composite materials incorporating ionic liquids (PIL–IL) has been considered as a highly promising strategy to design membranes with improved CO2 separation. In this study, membranes of pyrrolidinium-based PILs containing symmetric or asymmetric fluorosulfonyl derived anions, namely bis(fluorosulfonyl)amide ([FSI]–), (trifluoromethyl)sulfonyl-N-cyanoamide ([TFSAM]–) and (trifluoromethyl)sulfonyl-N-trifluoroacetamide ([TSAC]–), were prepared by the incorporation of different amounts of structurally similar ILs. The PIL–IL membranes were characterized by different techniques (TGA, DSC, FT-IR and Raman) and their CO2/H2 and H2/N2 separation performances were investigated. Higher CO2/H2 selectivities were obtained for PIL FSI–40 [C2mim][FSI] (αCO2/H2 = 9.0) and PIL TFSAM–40 [C2mim][TFSAM] (αCO2/H2 = 7.1) compared to those of PIL–IL membranes containing the conventional [TFSI]– anion at similar or even higher amounts of IL’s incorporation., Andreia S. L. Gouveia is grateful to FCT (Fundação para a Ciência e a Tecnologia) for her Doctoral (SFRH/BD/116600/2016) research grant. Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 745734. This work was supported by FCT through the project PTDC/CTM-POL/2676/2014. Centro de Química Estrutural acknowledges the financial support of Fundação para a Ciência e Tecnologia (UIDB/00100/2020). Elemental analysis and Raman spectroscopy were performed with the financial support from Ministry of Science and Higher Education of the Russian Federation using the equipment of Center for molecular composition studies of INEOS RAS.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Reducing Passive Drug Diffusion from Electrophoretic DrugDelivery Devices through Co-Ion Engineering

  • Chen, Shao-Tuan
  • Renny, Megan N.
  • Tomé, Liliana C.
  • Olmedo Martínez, Jorge L.
  • Udabe Sánchez, Esther
  • Jenkins, Elise P. W.
  • Mecerreyes Molero, David
  • Malliaras, George G.
  • McLeod, Robert R.
  • Proctor, Christopher M.
Implantable electrophoretic drug delivery devices have shown promise for applications ranging from treating pathologies such as epilepsy and cancer to regulating plant physiology. Upon applying a voltage, the devices electrophoretically transport charged drug molecules across an ion-conducting membrane out to the local implanted area. This solvent-flow-free "dry" delivery enables controlled drug release with minimal pressure increase at the outlet. However, a major challenge these devices face is limiting drug leakage in their idle state. Here, a method of reducing passive drug leakage through the choice of the drug co-ion is presented. By switching acetylcholine's associated co-ion from chloride to carboxylate co-ions as well as sulfopropyl acrylate-based polyanions, steady-state drug leakage rate is reduced up to sevenfold with minimal effect on the active drug delivery rate. Numerical simulations further illustrate the potential of this method and offer guidance for new material systems to suppress passive drug leakage in electrophoretic drug delivery devices., S.-T.C. and M.N.R. contributed equally to this work. S.-T.C. acknowledges funding from the Cambridge Trust and Ministry of Education, Taiwan. C.M.P. acknowledges funding from the University of Cambridge Borysiewicz Fellowship program as well as the Biotechnology and Biological Sciences Research Council David Phillips Fellowship. L.C.T. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734. E.U. thanks the Spanish MINECO for her FPU fellowship, while JLOM acknowledges the National Council of Science and Technology (CONACYT) in Mexico for his grant 471837. This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) project under the grant agreement no. 823989 "IONBIKE." M.N.R. acknowledges support from the National Science Foundation grant NSF EMPD 1509909 and NSF Plant Genome Research Project, Special Initiatives grant 1935594. E.P.W.J. acknowledges funding by a Trinity Hall Research Studentship. The authors acknowledge funding from EPSRC (EP/S009000/1).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Impact of MOF-5 on pyrrolidinium-based poly(ionic liquid)/ionic liquid membranes for biogas upgrading

  • Sampaio, Adriana M.
  • Rabais, Ana R.
  • Tomé, Liliana C.
  • Neves, Luísa A.
Postprint, Bearing in mind that Metal Organic Frameworks (MOFs) have remarkable CO2 adsorption selectivity and Mixed Matrix Membranes (MMMs) have been identified as potential solution for advancing the current state of the art of membrane separation technology, this work investigates the effect of combining a MOF, with high adsorption properties towards CO2 when compared to CH4 (MOF-5), with a blend of poly(ionic liquid)/ionic liquid (PIL/IL) for biogas upgrading. The blend system consisted of a pyrrolidinium-based PIL, poly([Pyr11][Tf2N]), and a free imidazolium-based IL, [C2mim][BETI]. The MOF-5 was incorporated at different loadings (10, 20, 30 wt%), and MMMs were prepared by solvent evaporation technique and characterized by diverse techniques (FTIR, SEM, TGA, puncture tests, water contact angle and single gas transport). The results showed that the free IL is miscible with the PIL, while MOF-5 particles were uniformly dispersed into the PIL/IL matrix. The formed PIL/IL/MOF-5 membranes revealed suitable thermal stability (Tonset up to 656 K) for biogas upgrading processes, but a loss of mechanical stability was found after the incorporation of MOF-5, and thus more rigid and fragile membranes were obtained. Besides, increasing MOF-5 content in the MMMs resulted in improved CO2 permeability. At 30 wt% of MOF-5 loading the CO2 permeability increased 133% when compared to that of the pristine PIL/IL membrane, while the ideal selectivity CO2/CH4 decreases. It was possible to demonstrate the relevance of studying different components within the polymeric matrix in order to assess not only thermal, mechanical and chemical properties, but also gas transport response., This work was supported by FCT (Fundação para Ciência e a Tecnologia) through the project PTDC/CTM-POL/2676/2014 and the Associate Laboratory for Green Chemistry - LAQV (UID/QUI/50006/2019). Ana R. Nabais and Luísa A. Neves are grateful to FCT/MCTES for their PhD grant (SFRH/BD/136963/2018) and FCT Investigador Contract (IF/00505/2014), respectively. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734.