Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the Origin of the Photocatalytic CO2 Reduction by Au- and Cu-Loaded TiO2: A Microsecond Transient Absorption Spectroscopy Study

  • Baldovi, Herme G.
  • Neatu, Stefan
  • Khan, Anish
  • Asiri, Abdullah M.
  • Kosa, Samia A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Recent photocatalytic data for CO2 reduction by H2O using simulated sunlight have shown that, while TiO2 Evonik P25 containing Au nanoparticles (NPs; Au/P25) generates considerably higher amounts of hydrogen than methane, when P25 contains Au-Cu alloy NPs the selectivity toward methane increases dramatically. To gain insight into this photocatalytic behavior, in the present work we have performed a transient absorption spectroscopy study in the microsecond time scale of three samples, namely, Au/P25, Cu/P25, and (Au, Cu)/P25 using 355 (UV) and SR nm (visible) lasers. The transient spectra exhibit as common features a narrower peak at about 320 nm and a broad band from 400 to 800 run. Using oxygen as electron quencher and methanol as hole quencher, the transient signals have been assigned to charge separation. Several cases were observed, including: (i) absence of quenching attributed to the lack of accessibility of the quencher to the site, (ii) quenching of the signal, or (iii) increase of the transient signal intensity attributed to less charge recombination by removal of one of the charge carriers. Of relevance to understand the origin of the photo catalytic CO2 reduction by H2O is the quenching of the charge separated state by these two reagents. In this way, it was observed that H2O exerts a remarkable influence to the transient signal, quenching its intensity in the three samples at the two irradiation wavelengths, except for (Au, Cu)/P25 upon 532 run excitation. Importantly, the distinctive behavior due to the presence of Cu has been attributed to the observed quenching by CO2 of the broad 400-800 nm band when excitation is performed with UV 355 nm light., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa Grant CTQ2012-32315), the Deanship of Scientific Research (DSR), King Abdulaziz University, under Grant No. 75-130-35-HiCi, and Marie Curie Project PIEF-GA-2011-298740 is gratefully acknowledged. The authors acknowledge technical and financial support of KAU. We also thank the Generalidad Valenciana for postgraduate research contract to H.G.B. (Prometeo 2012/2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Generation of MoS2 quantum dots by laser ablation of MoS2 particles in suspension and their photocatalytic activity for H-2 generation

  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Latorre Sánchez, Marcos
  • Esteve-Adell, Iván
  • Kham, Anish
  • Asiri, Abdullah M.
  • Kosa, Samia A.
[EN] MoS2 quantum dots (QDs) have been obtained in colloidal suspensions by 532 nm laser ablation (7 ns fwhp/pulse, 50 mJ/pulse) of commercial MoS2 particles in acetonitrile. High-resolution transmission electron microscopy images show a lateral size distribution from 5 to 20 nm, but a more homogeneous particle size of 20 nm can be obtained by silica gel chromatography purification in acetonitrile. MoS2 QDs obtained by laser ablation are constituted by 3-6 MoS2 layers (1.8-4 nm thickness) and exhibit photoluminescence whose lambda(PL) varies from 430 to 530 nm depending on the excitation wavelength. As predicted by theory, the confinement effect and the larger periphery in MoS2 QDs increasing the bandgap and having catalytically active edges are reflected in an enhancement of the photocatalytic activity for H-2 generation upon UV-Vis irradiation using CH3OH as sacrificial electron donor due to the increase in the reduction potential of conduction band electrons and the electron transfer kinetics., Financial support by Spanish Ministry of Economy and Competitiveness (Severo Ochoa and CTQ-2012-32315) and Generalitat Valenciana (Prometeo 2012-13) is gratefully acknowledged. This study was funded by the Deanship of Scientific Research (DSR), King Abdulaziz University, under Grant No. 75-130-35-HiCi. The authors, therefore, acknowledge technical and financial support of KAU. MLS and HGB thank the Spanish Ministry for postgraduate scholarships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic stereoselective addition to alkynes. Borylation or silylation promoted by magnesia-supported iron oxide and cis-diboronation or silaboration by supported platinum nanoparticles

  • Khan, Anish
  • Asiri, Abdullah M.
  • Kosa, Samia A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Grirrane, Abdessamad|||0000-0001-5388-3554
Iron oxide nanoparticles supported on magnesia (FeO/MgO) have been prepared by NaBH4 reduction of Fe(SO4) on MgO and spontaneous reoxidation upon storage. XPS of FeO/MgO indicates the presence of Fe(0) (16%) and Fe(II) (84%) on this solid. TEM images show that catalytically active FeO/MgO is constituted by iron oxide nanoparticles of about 25 nm dispersed on fibrous MgO. FeO/MgO in the presence of catalytic amounts of triphenylphosphine promotes highly regio- and stereoselective monoborylation of aromatic, aliphatic, terminal and internal alkynes. Chemical analysis of the liquid after the reaction and control experiments using Fe(II) salts in the absence or presence of PPh3 supports that catalysis is heterogeneous. The possibility that trace amounts of copper impurities present in the iron precursor influence the catalytic activity of FeO/MgO was studied using a commercially available high-purity Fe(SO4) as precursor (99.999% Fe purity) showing again good (but lower) activity. In addition, a control experiment using as catalyst MgO containing 30 times higher amounts of Cu than that present in low purity Fe did not lead to complete alkyne conversion, although product formation was observed in a large extent. Alkynes react with complete chemoselectivity versus alkenes. In contrast to FeO/MgO, Pt supported on MgO or active carbon efficiently promotes the stereoselective diboronation and silaboration of alkynes in the absence of triphenylphosphine at lower temperature to render the cis configured diboronated and silaborated alkene., Financial support by the Spanish Ministry of the Economy and Competitiveness (Severo Ochoa and CTQ2012-32315) and the Generalidad Valenciana (Prometeo 2012-014) is gratefully acknowledged. This work was also funded by the Deanship of Scientific Research (DSR), King Abdulaziz University under grant No. 75-130-35-HiCi. The authors, therefore, acknowledge technical and financial support of KAU.