Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Post-Li batteries: promises and challenges

  • Ponrouch, Alexandre
  • Palacín, M. Rosa
Current societal challenges in terms of energy storage have prompted an intensification in the research aiming at unravelling new high energy density battery technologies. These would have the potential of having disruptive effects in the world transition towards a less carbon-dependent energy economy through transport, both by electrification and renewable energy integration. Aside from controversial debates on lithium supply, the development of new sustainable battery chemistries based on abundant elements is appealing, especially for large-scale stationary applications. Interesting alternatives are to use sodium, magnesium or calcium instead of lithium. While for the Na-ion case, fast progresses are expected as a result of chemical similarities with lithium and the cumulated Li-ion battery know-how over the years, for Ca and Mg the situation is radically different. On the one hand, the possibility to use Ca or Mg metal anodes would bring a breakthrough in terms of energy density; on the other, development of suitable electrolytes and cathodes with efficient multivalent ion migration are bottlenecks to overcome., Funding from the European Union’s Horizon 2020 research and innovation programme is acknowledged, both from the European Research Council (A. Ponrouch ERC-2016-STG, CAMBAT grant agreement no. 715087) and FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617). Acknowledgements. Authors acknowledge ALISTORE-ERI members and NAIADES (H2020, 646433) partners for helpful discussions and are grateful to Fanny Barde (Toyota Motor Europe) and M. Elena Arroyo-de Dompablo for fruitful collaboration. Authors are grateful to Ministry of Science, Innovation and Universities for support through MAT2017-86616-R and ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multivalent rechargeable batteries

  • Ponrouch, Alexandre
  • Bitenc, Jan
  • Dominko, Robert
  • Lindahl, Niklas
  • Johansson, Patrik
  • Palacín, M. Rosa
Rechargeable battery technologies based on the use of metal anodes coupled to multivalent charge carrier ions (such as Mg2+, Ca2+ or Al3+) have the potential to deliver breakthroughs in energy density radically leap-frogging the current state-of-the-art Li-ion battery technology. However, both the use of metal anodes and the migration of multivalent ions, within the electrolyte and the electrodes, are technological bottlenecks which make these technologies, all at different degrees of maturity, not yet ready for practical applications. Moreover, the know-how gained during the many years of development of the Li-ion battery is not always transferable. This perspective paper reviews the current status of these multivalent battery technologies, describing issues and discussing possible routes to overcome them. Finally, a brief section about future perspectives is given., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cation Solvation and Physico-Chemical Properties of Ca Battery Electrolytes

  • Forero Saboya, Juan
  • Marchante, Elena
  • Neves de Araújo, Rafael Barros
  • Monti, Damien
  • Johansson, Patrik
  • Ponrouch, Alexandre
Divalent cation based batteries are being considered as potential high energy density storage devices. The optimization of electrolytes for these technologies is, however, still largely lacking. Recent demonstration of the feasibility of Ca and Mg plating and stripping in the presence of a passivation layer or an artificial interphase has paved the way for more diverse electrolyte formulations. Here we exhaustively evaluate several Ca based electrolytes with different salts, solvents and concentrations, via measuring physico-chemical properties and using vibrational spectroscopy. Some comparisons with Mg and Li based electrolytes are made in order to highlight the unique properties of the Ca2+ cation. The Ca-salt solubility is found to be a major issue, calling for development of new highly dissociative salts. Nonetheless, reasonable salt solubility and dissociation was achieved using TFSI, BF4 and triflate anion based electrolytes and high permittivity solvents such as EC, PC, gBL and DMF. The local Ca2+ coordination is concentration dependent and rather complex, possibly involving bidentate coordination and participation of the nitrogen atom of DMF. The ionicity and the degree of ion-pair formation were both investigated and found to be strongly dependent on the nature of the cation, solvent donicity and salt concentration. The large ion-ion interaction energies of the contact ion-pairs, confirmed by DFT calculations, are expected to play a major role in the interfacial processes, and thus we here provide electrolyte design strategies to engineer the cation solvation and possibly improve the power performance of divalent battery systems., Funding from the European Union’s Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement No. 715087), FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617), and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement No. 754397). A.P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496). P.J. acknowledges financial support from the Swedish Energy Agency (contract #37671-1, Next Generation Batteries) and Chalmers Battery Initiative, part of the profile Materials for Energy Applications jointly managed by the Areas of Advance Materials Science and Energy at the Chalmers University of Technology, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Achievements, Challenges, and Prospects of Calcium Batteries

  • Arroyo-de Dompablo, M. Elena
  • Ponrouch, Alexandre
  • Johansson, Patrik
  • Palacín, M. Rosa
This Review flows from past attempts to develop a (rechargeable) battery technology based on Ca via crucial breakthroughs to arrive at a comprehensive discussion of the current challenges at hand. The realization of a rechargeable Ca battery technology primarily requires identification and development of suitable electrodes and electrolytes, which is why we here cover the progress starting from the fundamental electrode/electrolyte requirements, concepts, materials, and compositions employed and finally a critical analysis of the state-of-theart, allowing us to conclude with the particular roadblocks still existing. As for crucial breakthroughs, reversible plating and stripping of calcium at the metal-anode interface was achieved only recently and for very specific electrolyte formulations. Therefore, while much of the current research aims at finding suitable cathodes to achieve proof-of-concept for a full Ca battery, the spectrum of electrolytes researched is also expanded. Compatibility of cell components is essential, and to ensure this, proper characterization is needed, which requires design of a multitude of reliable experimental setups and sometimes methodology development beyond that of other next generation battery technologies. Finally, we conclude with recommendations for future strategies to make best use of the current advances in materials science combined with computational design, electrochemistry, and battery engineering, all to propel the Ca battery technology to reality and ultimately reach its full potential for energy storage., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Funding from the European Union’s Horizon 2020 research and innovation programme H2020 FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617) and ERC-2016-STG, (CAMBAT grant agreement No 715087) and are grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) P.J. acknowledges the financial support from the Swedish Energy Agency (contract #37671-1, Next Generation Batteries) and Chalmers Battery Initiative, part of the profile Materials for Energy Applications jointly managed by the Areas of Advance Materials Science and Energy at the Chalmers University of Technology., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of Minerals as Electrode Materials for Ca-based Rechargeable Batteries

  • Luque del Villar, F. J.
  • Torres, A.
  • Tortajada, J.
  • Arroyo-de Dompablo, M.E.
Rechargeable lithium-ion batteries dominate the consumer electronics and electric vehicle markets. However, concerns on Li availability have prompted the development of alternative high energy density electrochemical energy storage systems. Rechargeable batteries based on a Ca metal anode can exhibit advantages in terms of energy density, safety and cost. The development of rechargeable Ca metal batteries requires the identification of suitable high specific energy cathode materials. This work focuses on Ca-bearing minerals because they represent stable and abundant compounds. Suitable minerals should contain a transition metal able of being reversibly reduced and oxidized, which points to several major classes of silicates and carbonates: olivine (CaFeSiO; kirschsteinite), pyroxene (CaFe/MnSiO; hedenbergite and johannsenite, respectively), garnet (CaFe/CrSiO; andradite and uvarovite, respectively), amphibole (CaFeSiO(OH); ferroactinolite) and double carbonates (CaMn(CO); kutnahorite and CaFe(CO); ankerite). This work discusses their electrode characteristics based on crystal chemistry analysis and density functional theory (DFT) calculations. The results indicate that upon Ca deintercalation, compounds such as pyroxene, garnet and double carbonate minerals could display high theoretical energy densities (ranging from 780 to 1500 Wh/kg) with moderate structural modifications. As a downside, DFT calculations indicate a hampered Ca mobility in their crystal structures. The overall analysis then disregards olivine, garnet, pyroxene, amphibole and double carbonates as structural types for future Ca-cathode materials design., Funding from the European Union’s Horizon 2020 research and innovation programme H2020 FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617) is acknowledged. The authors are grateful for access to the computational facilities from Universidad de Oviedo (MALTA-Consolider cluster)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

DFT investigation of Ca mobility in reduced-perovskite and oxidized-marokite oxides

  • Luque del Villar, F. J.
  • Torres, A.
  • Tortajada, J.
  • Arroyo-de Dompablo, M.E.
Progress in the development of rechargeable Ca-ion batteries demands the discovery of potential cathode materials. Transition metal oxides are interesting candidates due to their theoretical high energy densities, but with the drawback of a low Ca mobility. Previous computational/experimental investigations associate the electrochemical inactivity of various oxides (CaMO-perovskite, CaMnO-post-spinel and CaVO) to high energy barriers for Ca migration. The introduction of oxygen and/or Ca vacancies in ternary transition metal oxides is a likely way to reshape the local topology and hence improve the Ca diffusivity. In this work, the energy barriers for Ca migration are calculated and discussed for (i) oxygen-deficient perovskites within the related CaFeO-brownmillerite and CaMnO structures, and (ii) tunnel CaMnO, a derivative of the CaMnO-marokite with Ca vacancies., Funding from the European Union’s Horizon 2020 research and innovation programme H2020 FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617) is acknowledged. The authors are grateful for access to the computational facilities from Universidad de Oviedo (MALTA-Consolider cluster) and the Spanish.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Study of Ca and Mg Deintercalation from Ternary Tantalum Nitrides

  • Verrelli, Roberta
  • Black, Ashley P.
  • Frontera, Carlos
  • Oró, Judith
  • Arroyo de Dompablo, Maria Elena
  • Fuertes, Amparo
  • Palacín, M. Rosa
Layered CaTaN2 and MgTa2N3 and cubic Mg2Ta2N4 were prepared by direct solid state reaction from the binary nitrides Ta3N5 and A3N2 (A: Mg, Ca). CaTaN2 showed a slight Ca deficiency (0.11 moles per formula), and a monoclinic distortion from previously reported R3̅m symmetry, with space group C2/m and cell parameters a = 5.4011(2), b = 3.1434(1), c = 5.9464(2) Å and β = 107.91(3)°. Ca2+ and Mg2+ deintercalation was investigated in the three compounds both chemically and electrochemically. No significant Mg2+ extraction could be inferred for MgTa2N3 and Mg2Ta2N4, neither after reaction with NO2BF4 nor after electrochemical oxidation at 100 °C in alkyl carbonate electrolytes. Rietveld refinement of the X-ray powder diffraction pattern of chemically oxidized Ca0.89TaN2 indicates a decrease of the Ca content to 0.34 concomitant to the disappearance of the monoclinic distortion and expansion of the interlayer space from 5.658 to 5.762 Å, space group R3̅m and cell parameters a = 3.1103(1) and c = 17.287(1) Å. Deintercalation in this compound was also achieved electrochemically at 100 °C. Results of density functional theory calculations seem to indicate that reaction mechanisms for CaTaN2 oxidation additional and/or alternative to deintercalation are taking place, which is likely related to the loss of crystallinity observed upon oxidation and the irreversibility of the process., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Appraisal of calcium ferrites as cathodes for calcium rechargeable batteries: DFT, synthesis, characterization and electrochemistry of Ca4Fe9O17

  • Black, Ashley P.
  • Torres, Arturo
  • Frontera, Carlos
  • Palacín, M. Rosa
  • Arroyo-de Dompablo, M. Elena
Sustainability combined with high energy density prospects makes Fe-based oxides attractive as cathodes for calcium rechargeable batteries. This work presents a DFT evaluation of the CaFe2+nO4+n (0 < n < 3) family, for which both the average intercalation voltage and the theoretical specific capacity decrease with the increasing n value. The term n = 1/4, Ca4Fe9O17, meets the most appealing characteristics: a calculated average voltage of 4.16 V, a theoretical specific capacity of 230 mA h g−1 and the lowest energy barrier for Ca migration so far predicted for an existing oxide (0.72 eV). To overcome the previously reported synthesis difficulties, we employed a novel synthesis procedure in sealed quartz tubes followed by quenching in water. The XRD and SAED patterns of the prepared Ca4Fe9O17 powder reveal a certain degree of stacking defects along the c axis. Attempts to deinsert Ca ions from Ca4Fe9O17 by chemical means (NO2BF4 in ACN) and in electrochemical Ca cells were unsuccessful, although some hints of oxidation are observed in Li cells with the LP30 electrolyte. The suitability of Ca4Fe9O17 as a Ca cathode is pending further studies utilizing Ca-electrolytes with high anodic stability., This research was funded by the European Union’s Horizon 2020 research and innovation programme H2020 FETOPEN-1- 2016-2017 (CARBAT, grant agreement no. 766617). The authors are grateful for access to the computational facilities from Universidad de Oviedo (MALTA-Consolider cluster), to ALBA synchrotron for the provision of beam time and to Dr F. Fauth for his help during data collection and also acknowledge Dr. J. Oró-Solé for assistance with electron diffraction and Dr. Clemens Ritter for helpful discussions. ICMAB authors are also grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Steps Towards the Use of TiS2 Electrodes in Ca Batteries

  • Verrelli, Roberta
  • Black, Ashley P.
  • Dugas, Romain
  • Tchitchekova , Deyana S.
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
This paper is part of the JES Focus Issue on Challenges in Novel Electrolytes, Organic Materials, and Innovative Chemistries for Batteries in Honor of Michel Armand., A comparative study of the reduction of TiS2 in diverse electrolyte formulations involving Ca(BF4)2 and Ca(TFSI)2 salts was carried out at different temperatures (from 25 °C to 100 °C). While for the former salt intercalation of calcium is only observed at high temperatures, calcium intercalated phases are also observed for the latter even at room temperature. The nature of the electrolyte does also have an impact on the relative amounts of the phases formed. Since Ca(TFSI)2 based electrolytes do not enable calcium plating, cycling was attempted using activated carbon as counterelectrode, and the reversibility of the process was ascertained. Even if corrosion of stainless steel current collectors and side reactions do still prevent proper cyclability, the results achieved should contribute to the establishment of reliable and viable cell set-up and methodology for the unambiguous study of the intercalation process in multivalent battery systems., Funding from the European Union's Horizon 2020 research and innovation programme H2020 FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617) and ERC-2016-STG, (CAMBAT grant agreement No 715087) is gratefully acknowledged. Authors are grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

On the road toward calcium-based batteries

  • Ponrouch, Alexandre
  • Palacín, M. Rosa
This article reviews the progress in the development of a possible battery technology based on calcium, which is an abundant element and has an interesting standard reduction potential. The main bottleneck has been to find electrolytes enabling reversible plating and stripping of calcium, which has been overcome recently. Ongoing efforts focus in optimizing them to enable effective operation of calcium anodes at room temperature and within a large redox potential operation window, despite the formation of a passivation layer at the electrolyte/anode interface. In parallel, researchers are looking for suitable cathode materials enabling reasonably fast insertion and de-insertion of Ca2+ ions, which need to be probed using diverse complementary characterization techniques to avoid biased interpretation of results derived from possible side reactions., Authors are grateful to Fanny Barde (Toyota Motor Europe) and M. Elena Arroyo-de Dompablo for fruitful collaboration and helpful discussions and the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). Funding from the European Union's Horizon 2020 research and innovation programme H2020 either from the European Research Council (A. Ponrouch ERC-2016-STG, CAMBAT grant agreement no. 715087) or FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfaces and Interphases in Ca and Mg Batteries

  • Forero Saboya, Juan
  • Tchitchekova , Deyana S.
  • Johansson, Patrik
  • Palacín, M. Rosa
  • Ponrouch, Alexandre
The development of high energy density battery technologies based on divalent metals as the negative electrode is very appealing. Ca and Mg are especially interesting choices due to their combination of low standard reduction potential and natural abundance. One particular problem stalling the technological development of these batteries is the low efficiency of plating/stripping at the negative electrode, which relates to several factors that have not yet been looked at systematically; the nature/concentration of the electrolyte, which determines the mass transport of electro-active species (cation complexes) toward the electrode; the possible presence of passivation layers, which may hinder ionic transport and hence limit electrodeposition; and the mechanisms behind the charge transfer leading to nucleation/growth of the metal. Different electrolytes are investigated for Mg and Ca, with the presence/absence of chlorides in the formulation playing a crucial role in the cation desolvation. From a R&D point-of-view, proper characterization alongside modeling is crucial to understand the phenomena determining the mechanisms of the plating/stripping processes. The state-of-the-art is here presented together with a short perspective on the influence of the cation solvation also on the positive electrode and finally an attempt to define guidelines for future research in the field., J.D.F.-S. and D.S.T. contributed equally to this work. Funding from the European Union’s Horizon 2020 research and innovation programme ERC-2016-STG (CAMBAT Grant Agreement No. 715087) and H2020 FETOPEN-1-2016-2017 (CARBAT, Grant Agreement No. 766617) is gratefully acknowledged. ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). J.D.F.-S. is grateful to 2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). J.D.F.-S. contributed to this work in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Elucidation of the redox activity of Ca<inf>2</inf>MnO<inf>3.5</inf> and CaV<inf>2</inf>O<inf>4</inf> in calcium batteries using operando XRD: charge compensation mechanism and reversibility

  • Black, Ashley P.
  • Frontera, Carlos
  • Torres, Arturo
  • Recio Poo, Miguel
  • Rozier, Patrick
  • Forero Saboya, Juan
  • Fauth, François
  • Urones Garrote, Esteban
  • Arroyo de Dompablo, M. Elena
  • Palacín, M. Rosa
Ca2MnO3.5 and CaV2O4 were found to be potentially interesting as positive electrode materials for calcium metal-based high-energy density batteries with DFT-predicted average voltages of 3.7 V and 2.5 V and energy barriers for Ca migration of 1.1 eV and 0.6 eV, respectively. Both compounds were prepared by solid state reaction under reducing atmospheres. Optimum conditions to achieve Ca2MnO3.5 comprised the reduction of Ca2MnO4 under NH3 gas at 420⁰C with a flow rate of 1200 ml/min while CaV2O4 was achieved by reduction of CaV2O6 at 700 ⁰C under H2 flow. Electrochemical oxidation of Ca2MnO3.5 in lithium or calcium cells resulted in the formation of an orthorhombic phase with cell parameter (a= 5.2891(1), b= 10.551(2), c= 12.1422(1)). Operando synchrotron radiation diffraction experiments indicate that the charge compensation mechanism is not related to Ca2+ extraction but to intercalation of F− (originated from electrolyte salt decomposition) into the anion vacancy position, as confirmed by EELS and EDS. This process was found to be irreversible. In the case of CaV2O4, oxidation induces the electrochemical extraction of calcium with the formation of an orthorhombic phase (space group Pbnm) with cell parameters a = 10.72008(9) Å, b = 9.20213(2) Å and c = 2.89418(3) Å. The process was also investigated via operando synchrotron radiation diffraction, with the oxidized phase being found to reintercalate Ca2+ ions upon reduction, with the formation of a solid solution. Preliminary cycling tests reveals a decrease in the polarization after the first cycle and call for further investigation of this system., This research was funded by the European Union's Horizon 2020 research and innovation programme H2020 FETOPEN-1- 2016-2017 (CARBAT, grant agreement no. 766617). The authors are grateful for access to the computational facilities from Universidad de Oviedo (MALTA-Consolider cluster) and to ALBA synchrotron for beamtime (proposal 2021024935). ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed