Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Flexoelectric Enhancement of Strain Gradient Elasticity Across a Ferroelectric-to-Paraelectric Phase Transition

  • Harbola, Varun|||0000-0002-5485-762X
  • Pesquera, David|||0000-0003-0681-3371
  • Xu, Ruijuan|||0000-0001-5046-0599
  • Ashby, Paul D.|||0000-0003-4195-310X
  • Martin, Lane W.|||0000-0003-1889-2513
  • Hwang, Harold Y.
We study the temperature dependent elastic properties of Ba0.8Sr0.2TiO3 freestanding membranes across the ferroelectric-to-paraelectric phase transition using an atomic force microscope. The bending rigidity of thin membranes can be stiffer compared to stretching due to strain gradient elasticity (SGE). We measure the Young's modulus of freestanding Ba0.8Sr0.2TiO3 drumheads in bending and stretching dominated deformation regimes on a variable temperature platform, finding a peak in the difference between the two Young's moduli obtained at the phase transition. This demonstrates a dependence of SGE on the dielectric properties of a material and alludes to a flexoelectric origin of an effective SGE.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beyond substrates: Strain engineering of ferroelectric membranes

  • Pesquera, David
  • Parsonnet, Eric
  • Qualls, Alexander
  • Xu, Ruijuan
  • Gubser, Andrew J.
  • Kim, Jieun
  • Jiang, Yizhe
  • Velarde, Gabriel
  • Huang, Yen-Lin
  • Hwang, Harold Y.
  • Ramesh, Ramamoorthy
  • Martin, Lane W.
Strain engineering in perovskite oxides provides for dramatic control over material structure, phase, and properties, but is restricted by the discrete strain states produced by available high‐quality substrates. Here, using the ferroelectric BaTiO3, production of precisely strain‐engineered, substrate‐released nanoscale membranes is demonstrated via an epitaxial lift‐off process that allows the high crystalline quality of films grown on substrates to be replicated. In turn, fine structural tuning is achieved using interlayer stress in symmetric trilayer oxide‐metal/ferroelectric/oxide‐metal structures fabricated from the released membranes. In devices integrated on silicon, the interlayer stress provides deterministic control of ordering temperature (from 75 to 425 °C) and releasing the substrate clamping is shown to dramatically impact ferroelectric switching and domain dynamics (including reducing coercive fields to <10 kV cm−1 and improving switching times to <5 ns for a 20 µm diameter capacitor in a 100‐nm‐thick film). In devices integrated on flexible polymers, enhanced room‐temperature dielectric permittivity with large mechanical tunability (a 90% change upon ±0.1% strain application) is demonstrated. This approach paves the way toward the fabrication of ultrafast CMOS‐compatible ferroelectric memories and ultrasensitive flexible nanosensor devices, and it may also be leveraged for the stabilization of novel phases and functionalities not achievable via direct epitaxial growth., D.P. acknowledges funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No. 797123 and funding to the ICN2 provided by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV‐2017‐0706). E.P., A.Q., R.R., and L.W.M. acknowledge the support of the Intel Corp. as part of the FEINMAN Program. R.X. acknowledges support from U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, under contract no. DE‐AC02‐76SF00515, and partial support from Stanford Geballe Laboratory for Advanced Materials (GLAM) Postdoctoral Fellowship program. J.K. acknowledges support from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Contract No. DE‐AC02‐05‐CH11231 (Materials Project program KC23MP) for the development of ferroic thin‐film heterostructures. Y.J. acknowledges U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Award Number DE‐SC‐0012375 for the development of the BaTiO3 membranes. G.V. acknowledges the support of the National Science Foundation under Grant DMR‐1708615. Y.‐L.H. acknowledges support from the U.S. Department of Energy Advanced Manufacturing Office. H.Y.H acknowledges support from the Air Force Office of Scientific Research (AFOSR) Hybrid Materials MURI under award FA9550‐18‐1‐0480. R.R. acknowledges support from the SRC‐ASCENT center, which is part of the SRC‐DARPA JUMP program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beyond expectation: Advanced materials design, synthesis, and processing to enable novel ferroelectric properties and applications

  • Kim, Jieun
  • Lupi, Eduardo
  • Pesquera, David
  • Acharya, Megha
  • Zhao, Wenbo
  • Velarde, Gabriel
  • Griffin, Sinead
  • Martin, Lane W.
Ferroelectrics and related materials (e.g., non-traditional ferroelectrics such as relaxors) have long been used in a range of applications, but with the advent of new ways of modeling, synthesizing, and characterizing these materials, continued access to astonishing breakthroughs in our fundamental understanding come each year. While we still rely on these materials in a range of applications, we continue to re-write what is possible to be done with them. In turn, assumptions that have underpinned the use and design of certain materials are progressively being revisited. This perspective aims to provide an overview of the field of ferroelectric/relaxor/polar-oxide thin films in recent years, with an emphasis on emergent structure and function enabled by advanced synthesis, processing, and computational modeling., The authors acknowledge the support of the Army Research Office under grant W911NF-14-1-0104, the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Award Number DE-SC-0012375 and Materials Sciences and Engineering Division under Contract No. DE-AC02-05-CH11231 (Materials Project program KC23MP) for the development of ferroelectric materials, the National Science Foundation under grants DMR-1608938 and DMR-1708615, and the Intel Corp. via the FEINMAN program. D.P. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 797123., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlating Surface Crystal Orientation and Gas Kinetics in Perovskite Oxide Electrodes

  • Gao, Ran
  • Fernández, Abel
  • Chakraborty, Trinad
  • Luo, Aileen
  • Pesquera, David
  • Das, Sujit
  • Velarde, Gabriel
  • Thoréton, Vicent
  • Kilner, John A.
  • Ishihara, Tatsumi
  • Nemšák, Slavomír
  • Crumlin, Ethan J.
  • Martin, Lane W.
Solid–gas interactions at electrode surfaces determine the efficiency of solid-oxide fuel cells and electrolyzers. Here, the correlation between surface–gas kinetics and the crystal orientation of perovskite electrodes is studied in the model system LaSrCoFeO. The gas-exchange kinetics are characterized by synthesizing epitaxial half-cell geometries where three single-variant surfaces are produced [i.e., LaSrCoFeO/LaSrGaMgO/SrRuO/SrTiO (001), (110), and (111)]. Electrochemical impedance spectroscopy and electrical conductivity relaxation measurements reveal a strong surface-orientation dependency of the gas-exchange kinetics, wherein (111)-oriented surfaces exhibit an activity >3-times higher as compared to (001)-oriented surfaces. Oxygen partial pressure ((Formula presented.))-dependent electrochemical impedance spectroscopy studies reveal that while the three surfaces have different gas-exchange kinetics, the reaction mechanisms and rate-limiting steps are the same (i.e., charge-transfer to the diatomic oxygen species). First-principles calculations suggest that the formation energy of vacancies and adsorption at the various surfaces is different and influenced by the surface polarity. Finally, synchrotron-based, ambient-pressure X-ray spectroscopies reveal distinct electronic changes and surface chemistry among the different surface orientations. Taken together, thin-film epitaxy provides an efficient approach to control and understand the electrode reactivity ultimately demonstrating that the (111)-surface exhibits a high density of active surface sites which leads to higher activity., R.G. and A.F. contributed equally to this work. R.G., A.F., A.L., T.C., E.E., and L.W.M. acknowledge the support of the National Science Foundation under Grant OISE-1545907. D.P. acknowledges funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 797123. G.V. acknowledges the support of the National Science Foundation under Grant DMR-1708615. V.T. and T.I. acknowledge financial support from a Grant-in-Aid for Specially Promoted Research No. 16H06293) from MEXT, Japan and through the Japan Society for the Promotion of Science and the Solid Oxide Interfaces for Faster Ion Transport JSPS Core-to-Core Program (Advanced Research Networks). J.K. acknowledge the support by World Premier International Research Center Initiative (WPI), Ministry of Education, Culture, Sports, Science, and Technology of Japan (MEXT), Japan, Solid Oxide Interfaces for Faster Ion Transport (SOIFIT) JSPS/EPSRC (EP/P026478/1) Core-to-Core Program (Advanced Research Networks). This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyroelectric thin films - Past, present, and future

  • Velarde, Gabriel
  • Pandya, Shishir
  • Karthik, J.
  • Pesquera, David
  • Martin, Lane W.
Pyroelectrics are a material class that undergoes a change in polarization as the temperature of the system is varied. This effect can be utilized for applications ranging from thermal imaging and sensing to waste-heat energy conversion to thermally driven electron emission. Here, we review recent advances in the study and utilization of thin-film pyroelectrics. Leveraging advances in modeling, synthesis, and characterization has provided a pathway forward in one of the more poorly developed subfields of ferroelectricity. We introduce the complex physical phenomena of pyroelectricity, briefly explore the history of work in this space, and highlight not only new advances in the direct measurement of such effects but also how our ability to control thin-film materials is changing our understanding of this response. Finally, we discuss recent advances in thin-film pyroelectric devices and introduce a number of potentially new directions the field may follow in the coming years., Over the years, our team received support from numerous sources for the development of these techniques and scientific studies, including the Air Force Office of Scientific Research (Grant No. AF FA 9550-11-1-0073), the Army Research Office (Grant Nos. W911NF-10-1-0482 and W911NF-14-1-0104), the Office of Naval Research (Grant No. N00014-10-1-0525), the National Science Foundation (Grant Nos. DMR-1149062, DMR-1451219, and DMR-1708615), the European Union’s Horizon 2020 (Marie Skłodowska-Curie Grant No. 797123), and the U.S. Department of Energy, Office of Basic Energy Sciences [Grant Nos. DEFG02-07ER46459 and DE-AC02-05-CH11231 (Materials Project Program No. KC23MP)].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Freestanding complex-oxide membranes

  • Pesquera, David
  • Fernández, Abel
  • Khestanova, Ekaterina
  • Martin, Lane W.
Complex oxides show a vast range of functional responses, unparalleled within the inorganic solids realm, making them promising materials for applications as varied as next-generation field-effect transistors, spintronic devices, electro-optic modulators, pyroelectric detectors, or oxygen reduction catalysts. Their stability in ambient conditions, chemical versatility, and large susceptibility to minute structural and electronic modifications make them ideal subjects of study to discover emergent phenomena and to generate novel functionalities for next-generation devices. Recent advances in the synthesis of single-crystal, freestanding complex oxide membranes provide an unprecedented opportunity to study these materials in a nearly-ideal system (e.g. free of mechanical/thermal interaction with substrates) as well as expanding the range of tools for tweaking their order parameters (i.e. (anti-)ferromagnetic, (anti-)ferroelectric, ferroelastic), and increasing the possibility of achieving novel heterointegration approaches (including interfacing dissimilar materials) by avoiding the chemical, structural, or thermal constraints in synthesis processes. Here, we review the recent developments in the fabrication and characterization of complex-oxide membranes and discuss their potential for unraveling novel physicochemical phenomena at the nanoscale and for further exploiting their functionalities in technologically relevant devices., D P acknowledges the support of the European Union's Horizon 2020 research and innovation programmes under Grant agreements No. 797123 (Marie Skłodowska-Curie FERROENERGY) and No. 964931 (TSAR), funding from 'la Caixa' Foundation fellowship (ID 100010434), the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) through Grant No. PID2019-108573GB-C21, the CERCA programme (Generalitat de Catalunya) and the 'Severo Ochoa' programme for Centers of Excellence in R&D of MINECO (Grant No. SEV-2017-0706). E K acknowledges funding from BIST-FBA fellowship. D P and E K acknowledge support of BIST Ignite Grant (TeraFox). The work at Berkeley acknowledges the support of the Army Research Office under Grants W911NF-21-1-0118, W911NF-21-1-0126, and under the ETHOS MURI via cooperative agreement W911NF-21-2-0162, the Army Research Laboratory via the Collaborative for Hierarchical Agile and Responsive Materials (CHARM) under cooperative agreement W911-NF-19-2-0119, the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Contract No. DE-AC02-05-CH11231 (Materials Project program KC23MP), the U.S. Department of Energy, Office of Science for support of microelectronics research under Contract No. DE-AC02-05-CH11231, the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Award Number DE-SC-0012375, and the National Science Foundation under Grants DMR-1708615 and DMR-2102895
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enabling ultra-low-voltage switching in BaTiO3

  • Jiang, Yizhe
  • Parsonnet, Eric
  • Qualls, Alexander
  • Zhao, Wenbo
  • Susarla, S.
  • Pesquera, David
  • Dasgupta, A.
  • Acharya, Megha
  • Zhang, H.
  • Gosavi, Tanay
  • Lin, Chia-Ching
  • Nikonov, Dmitri E.
  • Li, Hai
  • Young, Ian A.
  • Ramesh, Ramamoorthy
  • Martin, Lane W.
Single crystals of BaTiO3 exhibit small switching fields and energies, but thin-film performance is considerably worse, thus precluding their use in next-generation devices. Here, we demonstrate high-quality BaTiO3 thin films with nearly bulk-like properties. Thickness scaling provides access to the coercive voltages (<100 mV) and fields (<10 kV cm−1) required for future applications and results in a switching energy of <2 J cm−3 (corresponding to <2 aJ per bit in a 10 × 10 × 10 nm3 device). While reduction in film thickness reduces coercive voltage, it does so at the expense of remanent polarization. Depolarization fields impact polar state stability in thicker films but fortunately suppress the coercive field, thus driving a deviation from Janovec–Kay–Dunn scaling and enabling a constant coercive field for films <150 nm in thickness. Switching studies reveal fast speeds (switching times of ~2 ns for 25-nm-thick films with 5-µm-diameter capacitors) and a pathway to subnanosecond switching. Finally, integration of BaTiO3 thin films onto silicon substrates is shown. We also discuss what remains to be demonstrated to enable the use of these materials for next-generation devices., This work was primarily supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under contract no. DE-AC02-05-CH11231 (Codesign of Ultra-Low-Voltage Beyond CMOS Microelectronics (MicroelecLBLRamesh)) for the development of materials for low-power microelectronics. E.P., T.G., C.-C.L., D.E.N., H.L., and I.A.Y. acknowledge support from the COFEEE and FEINMAN Programs supported by Intel Corp. W.Z. acknowledges support from the National Science Foundation under grant no. DMR-1708615. D.P. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 79712. A.D. acknowledges support from the Army Research Office under ETHOS MURI via cooperative agreement no. W911NF-21-2-0162. M.A. acknowledges support from the Army Research Office under grant no. W911NF-21-1-0118. R.R. and L.W.M. acknowledge additional support of the ARL Collaborative for Hierarchical Agile and Resonant Materials under cooperative agreement no. W911NF-19-2-0119. R.R. also acknowledges support from ASCENT, which is one of the SRC-JUMP Centers. Work at the Molecular Foundry was supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexoelectric enhancement of strain gradient elasticity across a ferroelectric-to-paraelectric phase transition

  • Harbola, Varun
  • Pesquera, David
  • Xu, Ruijuan
  • Ashby, Paul D.
  • Martin, Lane W.
  • Hwang, Harold Y.
We study the temperature dependent elastic properties of Ba0.8Sr0.2TiO3 freestanding membranes across the ferroelectric-to-paraelectric phase transition using an atomic force microscope. The bending rigidity of thin membranes can be stiffer compared to stretching due to strain gradient elasticity (SGE). We measure the Young’s modulus of freestanding Ba0.8Sr0.2TiO3 drumheads in bending and stretching dominated deformation regimes on a variable temperature platform, finding a peak in the difference between the two Young’s moduli obtained at the phase transition. This demonstrates a dependence of SGE on the dielectric properties of a material and alludes to a flexoelectric origin of an effective SGE., This work was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering (Contract No. DE-AC02-76SF00515) and the Gordon and Betty Moore Foundation’s Emergent Phenomena in Quantum Systems Initiative (Grant No. GBMF9072, synthesis equipment). For work completed at Berkeley, D.P. acknowledges the National Science Foundation under Grant DMR-2329111. D.P. further acknowledges the support of the European Union’s Horizon 2020 research and innovation programme under Grant agreement No. 797123 (Marie Skłodowska-Curie FERROENERGY) and funding from “la Caixa” Foundation fellowship (ID 100010434). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, CEX2021-001214-S). L.W.M. acknowledges support of the Army Research Office under Grant W911NF-21-1-0118. R.X. acknowledges the support from the Faculty Research and Professional Development Program (FRPD) at North Carolina State University. Work at the Molecular Foundry was supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Beyond substrates, strain engineering of ferroelectric membranes

  • Pesquera, David|||0000-0003-0681-3371
  • Parsonnet, Eric
  • Qualls, Alexander
  • Xu, Ruijuan
  • Gubser, Andrew J.
  • Kim, Jieun|||0000-0002-2885-1566
  • Jiang, Yizhe
  • Velarde, Gabriel|||0000-0002-7389-2017
  • Huang, Yen-Lin
  • Hwang, Harold Y.
  • Ramesh, Ramamoorthy
  • Martin, Lan W.
Strain engineering in perovskite oxides provides for dramatic control over material structure, phase, and properties, but is restricted by the discrete strain states produced by available high-quality substrates. Here, using the ferroelectric BaTiO, production of precisely strain-engineered, substrate-released nanoscale membranes is demonstrated via an epitaxial lift-off process that allows the high crystalline quality of films grown on substrates to be replicated. In turn, fine structural tuning is achieved using interlayer stress in symmetric trilayer oxide-metal/ferroelectric/oxide-metal structures fabricated from the released membranes. In devices integrated on silicon, the interlayer stress provides deterministic control of ordering temperature (from 75 to 425 °C) and releasing the substrate clamping is shown to dramatically impact ferroelectric switching and domain dynamics (including reducing coercive fields to <10 kV cm and improving switching times to <5 ns for a 20 µm diameter capacitor in a 100-nm-thick film). In devices integrated on flexible polymers, enhanced room-temperature dielectric permittivity with large mechanical tunability (a 90% change upon ±0.1% strain application) is demonstrated. This approach paves the way toward the fabrication of ultrafast CMOS-compatible ferroelectric memories and ultrasensitive flexible nanosensor devices, and it may also be leveraged for the stabilization of novel phases and functionalities not achievable via direct epitaxial growth.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pyroelectric thin films - Past, present, and future

  • Velarde, Gabriel|||0000-0002-7389-2017
  • Pandya, Shishir|||0000-0002-7557-5947
  • Karthik, J.
  • Pesquera, David|||0000-0003-0681-3371
  • Martin, Lane W.|||0000-0003-1889-2513
Pyroelectrics are a material class that undergoes a change in polarization as the temperature of the system is varied. This effect can be utilized for applications ranging from thermal imaging and sensing to waste-heat energy conversion to thermally driven electron emission. Here, we review recent advances in the study and utilization of thin-film pyroelectrics. Leveraging advances in modeling, synthesis, and characterization has provided a pathway forward in one of the more poorly developed subfields of ferroelectricity. We introduce the complex physical phenomena of pyroelectricity, briefly explore the history of work in this space, and highlight not only new advances in the direct measurement of such effects but also how our ability to control thin-film materials is changing our understanding of this response. Finally, we discuss recent advances in thin-film pyroelectric devices and introduce a number of potentially new directions the field may follow in the coming years.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Correlating surface crystal orientation and gas rinetics in perovskite oxide electrodes

  • Gao, Ran
  • Fernandez, Abel|||0000-0002-3628-9104
  • Chakraborty, Tanmoy
  • Luo, Aileen
  • Pesquera, David|||0000-0003-0681-3371
  • Das, Sujit
  • Velarde, Gabriel|||0000-0002-7389-2017
  • Thoréton, Vincent
  • Kilner, John
  • Ishihara, Tatsumi
  • Nemšák, Slamovír
  • Crumlin, Ethan J.
  • Ertekin, E.
  • Martin, Lane W.|||0000-0003-1889-2513
Solid-gas interactions at electrode surfaces determine the efficiency of solid-oxide fuel cells and electrolyzers. Here, the correlation between surface-gas kinetics and the crystal orientation of perovskite electrodes is studied in the model system LaSrCoFeO. The gas-exchange kinetics are characterized by synthesizing epitaxial half-cell geometries where three single-variant surfaces are produced [i.e., LaSrCoFeO/LaSrGaMgO/SrRuO/SrTiO (001), (110), and (111)]. Electrochemical impedance spectroscopy and electrical conductivity relaxation measurements reveal a strong surface-orientation dependency of the gas-exchange kinetics, wherein (111)-oriented surfaces exhibit an activity >3-times higher as compared to (001)-oriented surfaces. Oxygen partial pressure ((Formula presented.))-dependent electrochemical impedance spectroscopy studies reveal that while the three surfaces have different gas-exchange kinetics, the reaction mechanisms and rate-limiting steps are the same (i.e., charge-transfer to the diatomic oxygen species). First-principles calculations suggest that the formation energy of vacancies and adsorption at the various surfaces is different and influenced by the surface polarity. Finally, synchrotron-based, ambient-pressure X-ray spectroscopies reveal distinct electronic changes and surface chemistry among the different surface orientations. Taken together, thin-film epitaxy provides an efficient approach to control and understand the electrode reactivity ultimately demonstrating that the (111)-surface exhibits a high density of active surface sites which leads to higher activity.