Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

How efficiently does a metabolically enhanced system with denitrifying anaerobic methane oxidizing microorganisms remove antibiotics?

  • Quiton-Tapia, Silvana
  • Balboa Méndez, Sabela
  • Omil Prieto, Francisco
  • Garrido Fernández, Juan Manuel
  • Suárez Martínez, Sonia
In this work, the novel N-damo (Nitrite dependent anaerobic methane oxidation) process was investigated at high biomass activities for its potential to remove simultaneously nitrite and methane, as well as selected antibiotics commonly found in sewage in trace amounts. For this purpose, two MBRs were operated at three high nitrite loading rates (NLRs), namely 76 ± 9.9, 161.5 ± 11.4 and 215.2 ± 24.2 mg N–NO⁻2 L−1 d−1, at long-term operation. The MBRs performance achieved a significantly high nitrite removal activity for an N-damo process (specific denitrifying activity of up to 540 mg N–NO⁻2 g−1 VSS d−1), even comparable to heterotrophic denitrification values. In this study, we have implemented a novel operational strategy that sets our work apart from previous studies with similar bioreactors. Specifically, we have introduced Cerium as a trace element in the feeding medium, which serves as a key differentiating factor. It allowed maintaining a stable reactor operation at high NLRs. Microbial community composition evidenced that both MBRs were dominated with N-damo bacteria (67–87% relative abundance in period III and I, respectively). However, a decrease in functional N-damo bacteria (Candidatus Methylomirabilis) abundance was observed during the increase in biomass activity and concentration, concomitantly with an increase of the other minor families (Hypomicrobiaceae and Xanthobacteraceae). Most of the selected antibiotics showed high biotransformation such as sulfamethoxazole, trimethoprim, cefalexin and azithromycin, whereas others such as roxithromycin and clarithromycin were only partially degraded (20–35%). On the contrary, ciprofloxacin showed almost no removal. Despite the metabolic enhancement, no apparent increase on the antibiotic removal was observed throughout the operation, suggesting that microbiological composition was of greater influence than its primary metabolic activity on the removal of antibiotics
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Towards oxidoreductase-based processes for the removal of antibiotics from wastewater

  • De Boer, Sabrina Rose
  • Schäffer, Andreas
  • Moreira Vilar, María Teresa
The occurrence of antibiotics in surface waters is an alarming issue that can be addressed by advanced wastewater treatment technologies. Among them, enzymatic treatment is an emerging technology claimed to provide prospective benefits in terms of efficiency, controllability, and safety. This review illustrates the current state of research focused on enzyme-based approaches for pollutant abatement, specifically on the most critical classes of antibiotics. In addition to providing an overview of the efficiency both in terms of compound removal as well as toxicity reduction, we critically analyze if selected reaction conditions, such as the pH, temperature and water matrix are representative for real-case scenarios. Enzyme immobilization strategies onto inorganic, organic and composite material are analyzed in terms of their effect on stability and activity. Their feasibility to be applied in future processes was also evaluated. We found that adequate kinetic description of target compound removal by sufficiently detailed models is still scarce even though it will be key for successful conceptualization of treatment processes. Considering that only a few studies have been conducted at scales above 100 mL, we present the investigated reactor configurations which are at the forefront of further scale-up. The systematic approach presented in this manuscript, which aims to critically evaluate the feasibility to implement enzymatic processes for the removal of antibiotics, can be extrapolated to other types of recalcitrant compounds targeted by oxidoreductases. Intensified research in the recommended areas will contribute to the development of enzyme-based processes which can complement other advanced wastewater treatment processes.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Metalloenzymes play major roles to achieve high-rate nitrogen removal in N-damo communities: Lessons from metaproteomics

  • Quiton-Tapia, Silvana
  • Trueba Santiso, Alba María
  • Garrido Fernández, Juan Manuel
  • Suárez Martínez, Sonia
  • Omil Prieto, Francisco
Nitrite-driven anaerobic methane oxidation (N-damo) is a promising biological process to achieve carbon–neutral wastewater treatment solutions, aligned with the sustainable development goals. Here, the enzymatic activities in a membrane bioreactor highly enriched in N-damo bacteria operated at high nitrogen removal rates were investigated. Metaproteomic analyses, with a special focus on metalloenzymes, revealed the complete enzymatic route of N-damo including their unique nitric oxide dismutases. The relative protein abundance evidenced that “Ca. Methylomirabilis lanthanidiphila” was the predominant N-damo species, attributed to the induction of its lanthanide-binding methanol dehydrogenase in the presence of cerium. Metaproteomics also disclosed the activity of the accompanying taxa in denitrification, methylotrophy and methanotrophy. The most abundant functional metalloenzymes from this community require copper, iron, and cerium as cofactors which was correlated with the metal consumptions in the bioreactor. This study highlights the usefulness of metaproteomics for evaluating the enzymatic activities in engineering systems to optimize microbial management
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Solar Light Activation of Persulfate by TiO2 / Fe2O3 Layered Composite Films for Degradation of Amoxicillin: Degradation Mechanism, Matrix Effects, and Toxicity Assessments

  • Rosa, Francis M.de la
  • Papac, Josipa
  • Garcia Ballesteros, Sara
  • Kovač, Marin
  • Katančić, Zvonimir
  • Kušić, Hrvoje
  • Lončarić Božić, Ana
In this study, sandwich-type composites made of commercial TiO2-P25 and α-Fe2O3 are obtained by spin coating thin films with different layer configurations, namely: i) TiO2 layer over α-Fe2O3 (TiO2@α-Fe2O3), ii) α-Fe2O3 layer over TiO2 (α-Fe2O3@TiO2), and iii) physically mixed 50% (w/w) of TiO2/Fe2O3. Photocatalytic activity under simulated solar irradiation of the aforementioned composites and their pure components is investigated for the degradation of amoxicillin (AMX) in the presence and absence of persulfate (PS). In both cases, TiO2@α-Fe2O3 sandwich-type achieve the highest degradation rates of AMX and a marked effect of PS addition on the AMX degradation rate is noted. The influence of pH and PS concentration on AMX degradation rate is established by means of experimental design and response surface modeling. The AMX degradation pathway is studied by means of reactive oxygen species scavenging and identification of intermediates by liquid chromatography with tandem mass spectrometry. Their evolution is directly correlated with an increased toxicity assessed by Daphnia magna and Vibrio fischeri assays. Furthermore, biodegradability changes are correlated with the mineralization profile of AMX solution. The influence of water matrix constituents (Cl−, CO32−, NO3−, PO43− and Suwannee river natural organic matter) on AMX degradation is established as well, This paper is part of a project that has received funding from the European Union’s Horizon 2020 – Research and Innovation Framework Programme under the H2020 Marie Skłodowska-Curie Actions grant agreement No. 812880
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rapid biological reduction of graphene oxide: Impact on methane production and micropollutant transformation

  • Ponzelli, Michele
  • Zahedi, Soraya
  • Koch, Konrad
  • Drewes, Jörg E.
  • Radjenovic, Jelena
This study investigates the impact of graphene oxide (GO) addition to anaerobic sludge and the formation of biologically reduced GO (bioRGO) on both the anaerobic transformation of organic contaminants and the corresponding biogas production. A hydrogel-like material of anaerobic digestate and bioRGO was formed on the first day after GO addition. Raman spectroscopy showed an increase in the ID/IG ratio from 0.74 to 1.01, confirming the reduction of GO due to anaerobic respiration. The anaerobic removal of model antibiotics sulfamethoxazole and trimethoprim was unaffected by the GO addition. Yet formation of bioRGO inhibited the formation of the identified transformation products (TPs) of sulfamethoxazole, TP253 and TP257. Furthermore, the formation of TP253 and TP257 biotransformation products of sulfamethoxazole in sterilized sludge confirmed that their removal was likely achieved via intracellular enzymes that had enough thermal stability to remain active after the sterilization. For trimethoprim, no transformation products could be detected using the employed analytical method. The production of methane was generally inhibited up to 18% due to the presence of high GO levels (>100 mg/L) (288 vs. 353 mL CH4/g VS), This work was supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement – MSCA-ITN-2018 (EJD Nowelties, grant number 812880). J.R. is grateful for the financial support provided by the Spanish State Research Agency of the Spanish Ministry of Science, Innovation, and Universities (PID2019-110346RB-C22), ANTARES Project, 6
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Heterogeneous Catalytic Ozonation of Pharmaceuticals: Optimization of the Process by Response Surface Methodology

  • Tsiarta, Nikoletta
  • Gernjak, Wolfgang
  • Cajner, Hrvoje
  • Matijašić, Gordana
  • Ćurković, Lidija
Batch heterogeneous catalytic ozonation experiments were performed using commercial and synthesized nanoparticles as catalysts in aqueous ozone. The transferred ozone dose (TOD) ranged from 0 to 150 μM, and nanoparticles were added in concentrations between 0 and 1.5 g L−1, with all experiments conducted at 20 °C and a total volume of 240 mL. A Ce-doped TiO2 catalyst (1% molar ratio of Ce/Ti) was synthesized via the sol–gel method. Response surface methodology (RSM) was applied to identify the most significant factors affecting the removal of selected pharmaceuticals, with TOD emerging as the most critical variable. Higher TOD resulted in greater removal efficiencies. Furthermore, it was found that the commercially available metal oxides α-Al2O3, Mn2O3, TiO2, and CeO2, as well as the synthesized CeTiOx, did not increase the catalytic activity of ozone during the degradation of ibuprofen (IBF) and para-chlorobenzoic acid (pCBA). Carbamazepine (CBZ) and diclofenac (DCF) are compounds susceptible to ozone oxidation, thus their complete degradation at 150 μM transferred ozone dose was attained. The limited catalytic effect was attributed to the rapid consumption of ozone within the first minute of reaction, as well as the saturation of catalyst active sites by water molecules, which inhibited effective ozone adsorption and subsequent hydroxyl radical generation (.OH), This research was funded by the European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No.812880. It was part of the European Joint Doctorate project “NOWELTIES. N.T. and W.G. would also like to acknowledge funding from the Generalitat de Cataluña through the Consolidated Research Group Grant ICRA-Tech 2021-SGR-01283 and the CERCA program, 6
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enhanced methane production kinetics by graphene oxide in fed-batch tests

  • Ponzelli, Michele
  • Radjenovic, Jelena
  • Drewes, Jörg E.
  • Koch, Konrad
The study aims to prove that the addition of graphene oxide (GO) improves anaerobic digestion (AD) kinetic performance. Classical batch tests were modified to a fed-batch strategy at four GO levels while using two substrates (glucose and microcrystalline cellulose (MCC)). First-order and modified Gompertz models were respectively applied to evaluate the kinetic performance. The results showed significantly (p < 0.05) improved kinetic from the third refeeding step for both substrates. 20 mg GO per g of volatile solids (VS) led to an increase of up to 210% for the first-order rate constant (k) and up to 120% for maximum biochemical methane potential (BMP) rate (RMAX) compared to control for glucose and MCC, respectively. The findings of this work suggest the implementation of GO in continuously operated systems to accelerate the AD process, This work was supported by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement – MSCA-ITN-2018 (EJD Nowelties, grant number 812880), 6
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Improved Recovery of Overloaded Anaerobic Batch Reactors by Graphene Oxide

  • Ponzelli, Michele
  • Nguyen, Hieu
  • Drewes, Jörg E.
  • Koch, Konrad
Anaerobic digestion reactors may suffer from acidification when overloading occurs. Carbon-based materials are amended to mitigate the souring effects of excessive loading. This study aims to test if graphene oxide (GO) helps overloaded anaerobic reactors recover faster. Batch tests were conducted following a fed-batch strategy at different GO levels (0, 10, and 20 mg GO per g of volatile solid (VS)) and different inoculum substrate ratios (ISRs) of 2, 1, and 0.75 based on VS. While an ISR of 2 was initially applied, the ISR was decreased to 1 and 0.75 in two parallel sets of experiments to simulate overloading conditions at the fourth feeding cycle. Lastly, an ISR of 2 was restored in all assays. First-order model kinetic constants confirmed a significant (p < 0.05) effect by GO from the third feed on. Although the GO-amended assays did not alleviate the acidification effects, during the final phase the kinetic constants reached values similar to or even above the controls (without GO). Moreover, a GO concentration up to 20 mgGO/gVS had no impact on FOS/TAC. Overall, this study broadens the understanding of the design and operation of anaerobic reactors amended with GO, This research was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement—MSCA-ITN-2018 (EJD Nowelties, grant number 812880), 6
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Catalytic Ozonation of Pharmaceuticals Using CeO2-CeTiOx-Doped Crossflow Ultrafiltration Ceramic Membranes

  • Tsiarta, Nikoletta
  • Morović, Silvia
  • Mandić, Vilko
  • Panžić, Ivana
  • Blažic, Roko
  • Ćurković, Lidija
  • Gernjak, Wolfgang
The removal of persistent organic micropollutants (OMPs) from secondary effluent in wastewater treatment plants is critical for meeting water reuse standards. Traditional treatment methods often fail to adequately degrade these contaminants. This study explored the efficacy of a hybrid ozonation membrane filtration (HOMF) process using CeO2 and CeTiOx-doped ceramic crossflow ultrafiltration ceramic membranes for the degradation of OMPs. Hollow ceramic membranes (CM) with a 300 kDa molecular weight cut-off (MWCO) were modified to serve as substrates for catalytic nanosized metal oxides in a crossflow and inside-out operational configuration. Three types of depositions were tested: a single layer of CeO2, a single layer of CeTiOx, and a combined layer of CeO2 + CeTiOx. These catalytic nanoparticles were distributed uniformly using a solution-based method supported by vacuum infiltration to ensure high-throughput deposition. The results demonstrated successful infiltration of the metal oxides, although the yield permeability and transmembrane flow varied, following this order: pristine > CeTiOx > CeO2 > CeO2 + CeTiOx. Four OMPs were examined: two easily degraded by ozone (carbamazepine and diclofenac) and two recalcitrant (ibuprofen and pCBA). The highest OMP degradation was observed in demineralized water, particularly with the CeO2 + CeTiOx modification, suggesting O3 decomposition to hydroxyl radicals. The increased resistance in the modified membranes contributed to the adsorption phenomena. The degradation efficiency decreased in secondary effluent due to competition with the organic and inorganic load, highlighting the challenges in complex water matrices, his research was funded by the European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No. 812880. It was part of the European Joint Doctorate project “NOWELTIES”. N.T. and W.G. would also like to acknowledge funding from the Generalitat de Cataluña through the Consolidated Research Group Grant ICRA-Tech 2021-SGR-01283 and the CERCA program, 6
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Degradation of diclofenac and 4-chlorobenzoic acid in aqueous solution by cold atmospheric plasma source

  • Kumar, Amit
  • Škoro, Nikola
  • Jovanović, Olivera
  • Petrović, Anđelija
  • Živković, Suzana
  • Cuervo Lumbaque, Elisabeth
  • Farré, Maria José
  • Puač, Nevena
In this study, cold atmospheric plasma (CAP) was explored as a novel advanced oxidation process (AOP) for water decontamination. Samples with high concentration aqueous solutions of Diclofenac sodium (DCF) and 4-Chlorobenzoic acid (pCBA) were treated by plasma systems. Atmospheric pressure plasma jets (APPJs) with a 1 pin-electrode and multi-needle electrodes (3 pins) configurations were used. The plasma generated using argon as working gas was touching a stationary liquid surface in the case of pin electrode-APPJ while for multi-needle electrodes-APPJ the liquid sample was flowing during treatment. In both configurations, a commercial RF power supply was used for plasma ignition. Measurement of electrical signals enabled precise determination of power delivered from the plasma to the sample. The optical emission spectroscopy (OES) of plasma confirmed the appearance of excited reactive species in the plasma, such as hydroxyl radicals and atomic oxygen which are considered to be key reactive species in AOPs for the degradation of organic pollutants. Treatments were conducted with two different volumes (5 mL and 250 mL) of contaminated water samples. The data acquired allowed calculation of degradation efficiency and energy yield for both plasma sources. When treated with pin-APPJ, almost complete degradation of 5 mL DCF occurred in 1 min with the initial concentration of 25 mg/L and 50 mg/L, whereas 5 mL pCBA almost degraded in 10 min at the initial concentration of 25 mg/L and 40 mg/L. The treatment results with multi-needle electrodes system confirmed that DCF almost completely degraded in 30 min and pCBA degraded about 24 % in 50 min. The maximum calculated energy yield for 50 % removal was 6465 mg/kWh after treatment of 250 mL of DCF aqueous solution utilizing the plasma recirculation technique. The measurements also provided an insight to the kinetics of DCF and pCBA degradation. Degradation products and pathways for DCF were determined using LC-MS measurements, This work was carried out under NOWELTIES project. NOWELTIES received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 812880. N.S., A.P., O. J. and N.P. are funded by the Ministry of Science, Techological Development and Innovation, grant number 451-03-68/2022-14/200024. This article is basedupon work from COST Action PlAgri, CA19110, supported by COST (European Cooperation in Science and Technology). Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 6