Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bioaccumulation of CuO nanomaterials in rainbow trout: Influence of exposure route and particle shape

  • Kalman, Judit
  • Connoly, Mona
  • Abdolahpur-Monikh, Fazel
  • Fernández-Saavedra, Rocío
  • Cardona-García, Ana I.
  • Conde, Estefanía
  • Martínez-Morcillo, Salomé
  • Peijnenburg, Willie J. G. M.
  • Rucandio, Isabel
  • Fernández-Cruz, M. L.
10 Pág. Departamento de Medio Ambiente y Agronomía​, The bioaccumulation potential of spherical and rod-shaped CuO nanomaterials (NMs) was assessed in rainbow trout (Oncorhynchus mykiss) exposed via water and diet following the OECD Test Guideline No. 305. Fish were exposed via diet to both NMs at concentrations of 70 and 500 mg Cu/kg for 15 days, followed by 44 days of depuration. For water-borne exposure, only the rod-shaped CuO NMs were tested at 0.08 and 0.8 mg Cu/L for 28 days, followed by 14 days of depuration. The concentration of Cu was determined in fish whole body to derive biomagnification and bioconcentration factors (BMF and BCF). Different tissues were sampled to investigate the total Cu biodistribution and target organs as well as the particle number-based bioaccumulation of CuO NMs. Estimated BMF and BCF values were below the thresholds of concern. However, shape and route influenced depuration. Following dietary exposure, there was a higher depuration of Cu from fish exposed to the rod-shaped compared to the spherical CuO NMs. A higher depuration was also observed for rod-shaped CuO NMs following the dietary exposure compared the aqueous one. Despite the much higher dietary exposure concentrations of rod-shape CuO NMs, similar Cu body burdens were reached via water. Cu was found in particulate form in different tissues. Although these NMs had a low bioaccumulation potential, differences in distribution and elimination patterns of Cu were observed depending on the exposure route and particle shape. Careful consideration of the most relevant exposure route is needed when designing a bioaccumulation experiment for testing NMs., This work was funded through the H2020 project Gov4Nano (Grant Agreement nº 814401). Authors thank all the effort done at the National Centre for Electron Microscopy (Spain) in relation to the electron microscopy work. Mona Connolly has received financing granted by the Community of Madrid (2018T2/AMB-11392, Mode 2, Young Doctor Recruitment)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards FAIR nanosafety data

  • Jeliazkova, Nina
  • Apostolova, Margarita D.
  • Andreoli, Cristina
  • Barone, Flavia
  • Barrick, Andrew
  • Battistelli, Chiara
  • Bossa, Cecilia
  • Botea-Petcu, Alina
  • Châtel, Amélie
  • De Angelis, Isabella
  • Dusinska, Maria
  • El Yamani, Naouale
  • Gheorghe, Daniela
  • Giusti, Anna
  • Gómez-Fernández, Paloma
  • Gromelski, Maciej
  • Jacobsen, Nicklas Raun
  • Jeliazkov, Vedrin
  • Jensen, Keld Alstrup
  • Kochev, Nikolay
  • Kohonen, Pekka
  • Manier, Nicolas
  • Mariussen, Espen
  • Mech, Agnieszka
  • Navas, José María
  • Paskaleva, Vesselina
  • Precupas, Aurica
  • Puzyn, Tomasz
  • Rasmussen, Kirsten
  • Ritchie, Peter
  • Llopis, Isabel Rodríguez
  • Rundén-Pran, Elise
  • Sandu, Romica
  • Shandilya, Neeraj
  • Tanasescu, Speranta
  • Haase, Andrea
  • Nymark, Penny
13 Pág. Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, Nanotechnology is a key enabling technology with billions of euros in global investment from public funding, which include large collaborative projects that have investigated environmental and health safety aspects of nanomaterials, but the reuse of accumulated data is clearly lagging behind. Here we summarize challenges and provide recommendations for the efficient reuse of nanosafety data, in line with the recently established FAIR (findable, accessible, interoperable and reusable) guiding principles. We describe the FAIR-aligned Nanosafety Data Interface, with an aggregated findability, accessibility and interoperability across physicochemical, bio-nano interaction, human toxicity, omics, ecotoxicological and exposure data. Overall, we illustrate a much-needed path towards standards for the optimized use of existing data, which avoids duplication of efforts, and provides a multitude of options to promote safe and sustainable nanotechnology., The work leading to this article has received funding from the European Union’s Horizon 2020 Research and Innovation programme, Grant Agreements no. 646221 (NanoReg2, 2015–2019), no. 814401 (Gov4Nano, 2019–2022) and no. 814425 (RiskGONE 2019–2023). In addition, the European Union’s 7th Framework Programme projects NANoREG (2013–2017, Grant Agreement no. 310584), NanoTEST (2008–2012, no. 201335) and ENPRA (2009–2012, no. 228789), the European Union’s Health Programme Joint Action project NANOGENOTOX (2010–2013, no. 2009 21 01) and the US NIH NCI caNanoLab portal are acknowledged for providing data, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Considerations for bioaccumulation studies in fish with nanomaterials

  • Connoly, Mona
  • Martínez-Morcillo, Salomé
  • Kalman, Judit
  • Navas, José María
  • Bleeker, Eric A.J.
  • Fernández-Cruz, M. L.
14 Pág. Departamento de Medio Ambiente y Agronomía​, Nanomaterials (NMs) pose challenges in performing bioaccumulation studies in fish and in regulatory interpretation of results. Therefore, a clear guidance is needed to obtain reliable, reproducible and comparable results. By analysing all the available literature, we aim in this manuscript to identify the critical aspects that should be addressed in these type of studies. Seventy-eight studies from a total of 67 published articles were identified in which a variety of approaches were used: aqueous exposure (49 studies), dietary exposure (19), and pre-exposed animals for trophic transfer studies (10). The NMs tested included TiO2, Zn, ZnO, Cu, CuO, Ag, Au, CeO2, Fe2O3, Fe3O4, Se, CdS, CdSe/ZnS-QDs, CdTe/ZnS-QDs, graphene, fullerenol and MWCNTs. In general, there is a scarcity of bioaccumulation studies for the different NMs. In particular, studies that use the dietary exposure route are lacking. TiO2 NMs are the most studied for bioaccumulation potential in fish (20%), whereas very few data were available for CuO, FeO and carbon-based NMs. Different information gaps were identified in these studies that hamper overall conclusions to be made on the bioaccumulation potential of NMs. The main critical issues related to NM testing for bioaccumulation include: maintenance of stable exposure concentrations, the influence of feeding regimen on uptake and elimination, the use of appropriate feed spiking methodologies, the potential need for testing different concentrations, and the reporting of bioaccumulation endpoints (BCF/BMF). Each of these issues needs further guidance to allow proper use and reporting of NM bioaccumulation data for regulatory purposes., Gov4Nano - This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814401. Mona Connolly has received financing granted by the Community of Madrid (2018T2/AMB-11392, Mode 2, Young Doctor Recruitment)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A template wizard for the cocreation of machine-readable data-reporting to harmonize the evaluation of (nano)materials

  • Jeliazkova, Nina
  • Longhin, Eleonora
  • El Yamani, Naouale
  • Rundén-Pran, Elise
  • Moschini, Elisa
  • Serchi, Tommaso
  • Vrček, Ivana Vinković
  • Burgum, Michael J.
  • Doak, Shareen H.
  • Cimpan, Mihaela Roxana
  • Rios-Mondragon, Ivan
  • Cimpan, Emil
  • Battistelli, Chiara
  • Bossa, Cecilia
  • Tsekovska, Rositsa
  • Drobne, Damjana
  • Novak, Sara
  • Repar, Neža
  • Ammar, Ammar
  • Nymark, Penny
  • Di Battista, Veronica
  • Sosnowska, Anita
  • Puzyn, Tomasz
  • Kochev, Nikolay
  • Iliev, Luchesar
  • Jeliazkov, Vedrin
  • Reilly, Katie
  • Lynch, Iseult
  • Bakker, Martine
  • Delpivo, Camila
  • Sánchez-Jiménez, A.
  • Fonseca, Ana Sofia
  • Manier, Nicolas
  • Fernández-Cruz, M. L.
  • Rashid, Shahzad
  • Willighagen, Egon L.
  • Apostolova, Margarita D.
  • Dusinska, Maria
43 Pág., Making research data findable, accessible, interoperable and reusable (FAIR) is typically hampered by a lack of skills in technical aspects of data management by data generators and a lack of resources. We developed a Template Wizard for researchers to easily create templates suitable for consistently capturing data and metadata from their experiments. The templates are easy to use and enable the compilation of machine-readable metadata to accompany data generation and align them to existing community standards and databases, such as eNanoMapper, streamlining the adoption of the FAIR principles. These templates are citable objects and are available as online tools. The Template Wizard is designed to be user friendly and facilitates using and reusing existing templates for new projects or project extensions. The wizard is accompanied by an online template validator, which allows self-evaluation of the template (to ensure mapping to the data schema and machine readability of the captured data) and transformation by an open-source parser into machine-readable formats, compliant with the FAIR principles. The templates are based on extensive collective experience in nanosafety data collection and include over 60 harmonized data entry templates for physicochemical characterization and hazard assessment (cell viability, genotoxicity, environmental organism dose-response tests, omics), as well as exposure and release studies. The templates are generalizable across fields and have already been extended and adapted for microplastics and advanced materials research. The harmonized templates improve the reliability of interlaboratory comparisons, data reuse and meta-analyses and can facilitate the safety evaluation and regulation process for (nano) materials., Supported by H2020 projects RiskGONE (no. 814425), HARMLESS (no. 953183), Gov4Nano (no. 814401), SABYDOMA (862296), SBD4NANO (862195), PLASTICFATE (no. 965367), POLYRISK (964766), NANOREG2 (no. 646221), PROPLANET (no. 101091842), NanoSolveIT (no. 814572), CompSafeNano (no. 101008099), TWINALT (no. 952404), VISION (no. 857381), KAPPA project EYFORTX2 (no. T001000099-PZ-2021), TEPCAN project (NCBR no. NOR/POLNOR/TEPCAN/0057/ 2019-00), hCOMET project (COST Action, CA 15132), Slovenian Research Agency projects P1-0207 and P1-0184, and by the Norwegian Research Council project NanoBioReal (no. 288768)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of exposure route and surface coating on the bioaccumulation of CdTe quantum dots in fish. Considerations for testing nanomaterials following OECD Test guideline No. 305

  • Kalman, Judit
  • Fernández Saavedra, Rocío
  • Díaz-Tielas, Carla
  • Connolly, Mona
  • Cardona-García, Ana I.
  • Clark, Nathaniel
  • Handy, Richard
  • Bleeker, Eric A.J.
  • Rucandio, Isabel
  • Navas, José María
  • Fernández-Cruz, M. L.
To identify nanomaterials of potential environmental concern and to support risk assessment for regulatory purposes bioaccumulation testing is required. However, further guidance is needed when applying the fish bioaccumulation OECD test guideline (TG) No. 305 to nanomaterials. Also questions remain surrounding the most appropriate exposure route and if subtle modifications to these materials (e.g. different coatings) will influence bioaccumulation potential. Therefore in this study OECD TG 305 was applied to assess the bioaccumulation potential of CdTe quantum dots (QDs) with additional considerations for testing nanomaterials. CdTe QDs were selected for our studies because of their increasing use, possible release to water and limited information on their bioaccumulation potential in fish. To specifically address the influence of exposure route and surface coating on bioaccumulation, the uptake and depuration kinetics of two differently coated (carboxylate and polyethylene glycol coatings) CdTe QDs were investigated in rainbow trout (Oncorhynchus mykiss) following either aqueous or dietary exposure. In the dietary exposure bioaccumulation assays, fish were exposed to CdTe QDs at concentrations of 10 or 100 mg/kg for 28 days, followed by a 28-day depuration period to derive biomagnification factors (BMFs). In the aqueous exposure bioaccumulation tests, fish were exposed to 4 or 40 μg CdTe QDs /L for 28 days, followed by a 14-day depuration period to derive bioconcentration factors (BCFs). Both materials showed a low bioaccumulation potential and while a higher uptake was seen for the PEG coated materials, overall biodistribution, uptake and depuration kinetics were similar. The dietary exposure route allowed good and consistent estimations of BMF following both sequential and simultaneous methods. Aqueous exposures showed CdTe QDs dissolution in aquarium water and a steady state was not reached within 28 days, which challenged derivation of BCF values. This study provides important information on two differently coated CdTe QDs bioaccumulation, on OECD TG 305 applicability to metallic nanomaterials and on the reporting of accurate regulatory acceptable indicators of nanomaterial bioaccumulation potential., This work was funded through the H2020 project Gov4Nano (Grant Agreement n° 814401). Authors thank all the effort done at the National Centre for Electron Microscopy (Spain) in relation to the electron microscopy work. Mona Connolly has received financing granted by the Community of Madrid (2018 T2/AMB-11392, Mode 2, Young Doctor Recruitment)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Current status and future challenges of genotoxicity OECD Test Guidelines for nanomaterials: a workshop report

  • Doak, Shareen H
  • Andreoli, Cristina
  • Burgum, Michael J
  • Chaudhry, Qasim
  • Bleeker, Eric A J
  • Bossa, Cecilia
  • Domenech, Josefa
  • Drobne, Damjana
  • Fessard, Valérie
  • Jeliazkova, Nina
  • Longhin, Eleonora
  • Rundén-Pran, Elise
  • Stepnik, Maciej
  • El Yamani, Naouale
  • Catalán, Julia
  • Dusinska, Maria
Genotoxicity testing for nanomaterials remains challenging as standard testing approaches require some adaptation, and further development of nano-specific OECD Test Guidelines (TGs) and Guidance Documents (GDs) are needed. However, the field of genotoxicology continues to progress and new approach methodologies (NAMs) are being developed that could provide relevant information on the range of mechanisms of genotoxic action that may be imparted by nanomaterials. There is a recognition of the need for implementation of new and/or adapted OECD TGs, new OECD GDs, and utilization of NAMs within a genotoxicity testing framework for nanomaterials. As such, the requirements to apply new experimental approaches and data for genotoxicity assessment of nanomaterials in a regulatory context is neither clear, nor used in practice. Thus, an international workshop with representatives from regulatory agencies, industry, government, and academic scientists was convened to discuss these issues. The expert discussion highlighted the current deficiencies that exist in standard testing approaches within exposure regimes, insufficient physicochemical characterization, lack of demonstration of cell or tissue uptake and internalization, and limitations in the coverage of genotoxic modes of action. Regarding the latter aspect, a consensus was reached on the importance of using NAMs to support the genotoxicity assessment of nanomaterials. Also highlighted was the need for close engagement between scientists and regulators to (i) provide clarity on the regulatory needs, (ii) improve the acceptance and use of NAM-generated data, and (iii) define how NAMs may be used as part of weight of evidence approaches for use in regulatory risk assessments.