Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Towards a machine learning model for explicit algebraic Reynolds stress modelling using multi-expression programming

  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Wallin, Stefan
  • Colombo, Alessandro
  • Temmerman, Lionel
  • Wunsch, Dirk
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
A novel framework for a 5-term explicit algebraic Reynolds stress model has been proposed, which is suitable for machine learning procedures. Under this framework, high-fidelity datasets have been explored and post-processed. Through multi-expression programming, models have been obtained using these data. They have been thoroughly tested and present all the desirable features of a model. Implementation of these models in a numerical code has also been possible. Results have shown that they present a small upgrade over classical models for certain kinds of flows, thus showing that the physics have been captured well. It is proved that the present workflow can obtain valid expressions with similar to better performance than the baseline model., The research leading to this work has received funding within the HiFi-TURB project from the European Union’s Horizon2020 research and innovation programme under grant agreement No 814837. Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Self-induced large-scale motions in a three-dimensional diffuser

  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Eiximeno Franch, Benet
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
A direct numerical simulation of a three-dimensional diffuser at Reynolds number Re = 10,000 (based on inlet bulk velocity) has been performed using a low-dissipation finite element code. The geometry chosen for this work is the Stanford diffuser, introduced by Cherry et al. (Int. J. Heat Fluid Flow 29:803–811, 2008). Results have been exhaustively compared with the published data with a quite good agreement. Additionally, further turbulent statistics have been provided such as the Reynolds stresses or the turbulent kinetic energy. A proper orthogonal decomposition and a dynamic mode decomposition analyses of the main flow variables have been performed to identify the main characteristics of the large-scale motions. A combined, self-induced movement of the large-scales has been found to originate in the top-right expansion corner with two clear features. A low-frequency diagonal cross-stream travelling wave first reported by Malm et al. (J. Fluid Mech. 699:320–351, 2012), has been clearly identified in the spatial modes of the stream-wise velocity components and the pressure, associated with the narrow band frequency of St¿[0.083,0.01] . This movement is caused by the geometrical expansion of the diffuser in the cross-stream direction. A second low-frequency trait has been identified associated with the persisting secondary flows and acting as a back and forth global accelerating-decelerating motion located on the straight area of the diffuser, with associated frequencies of St<0.005 . The smallest frequency observed in this work has been St=0.0013 . This low-frequency observed in the Stanford diffuser points out the need for longer simulations in order to obtain further turbulent statistics., The research leading to this work has been partially funded by the European Project NextSim which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and co-founded by the Spanish Agencia Estatal de Investigacion (AEI) under grant agreement PCI2021-121962. Benet Eiximeno also acknowledges the financial support by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Refs: PID2020-116937RB-C21 and PID2020-116937RB-C22). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). He also acknowledges the support of the European Project HiFi-TURB which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814837. We also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain. The authors acknowledge the support of Departament de Recerca i Universitats de la Generalitat de Catalunya to the Research Group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

DNS and POD analysis of separated flow in a three-dimensional diffuser

  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Eiximeno Franch, Benet
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
A DNS of a three dimensional diffuser has been performed with the in-house solver Alya. The resulting dataset presents a good agreement with existing numerical and experimental data, even without smoothing of the sharp corners. Discrepancies in the duct area have been found to be due to uncertainties, however, in the diffuser region differences are more noticeably between experimental and numerical data, where they all exhibit an oscillating behavior. The POD analysis of this flow has quantified a slow mixing mechanism inside the diffuser with a period of 4 flow-through times. This is due to the slow motions in the diffuser that are only represented 3 times over the 21 flow-through times in which statistics are gathered. This is considered to be the main reason of discrepancy between all datasets. While DNS of turbulent flow at are feasible nowadays, temporal dynamics of the Standford diffuser present a challenge as the integration time needed becomes larger. The current dataset is, nevertheless, valid for further analysis and activities and will be made available online., This work was funded as part of the European Project HiFi-TURB which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814837., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

DNS and POD analysis of separated flow in a three-dimensional diffuser

  • Miró Jané, Arnau
  • Eiximeno Franch, Benet
  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
A DNS of a three dimensional diffuser has been performed with the in-house solver Alya. The resulting dataset presents a good agreement with existing numerical and experimental data, even without smoothing of the sharp corners. Discrepancies in the duct area have been found to be due to uncertainties, however, in the diffuser region differences are more noticeably between experimental and numerical data, where they all exhibit an oscillating behavior. The POD analysis of this flow has quantified a slow mixing mechanism inside the diffuser with a period of 4 flow-through times. This is due to the slow motions in the diffuser that are only represented 3 times over the 21 flow-through times in which statistics are gathered. This is considered to be the main reason of discrepancy between all datasets. While DNS of turbulent flow at are feasible nowadays, temporal dynamics of the Standford diffuser present a challenge as the integration time needed becomes larger. The current dataset is, nevertheless, valid for further analysis and activities and will be made available online., This work was funded as part of the European Project HiFi-TURB which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814837., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Self-induced large-scale motions in a three-dimensional diffuser

  • Miró Jané, Arnau
  • Eiximeno Franch, Benet
  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
A direct numerical simulation of a three-dimensional diffuser at Reynolds number Re = 10,000 (based on inlet bulk velocity) has been performed using a low-dissipation finite element code. The geometry chosen for this work is the Stanford diffuser, introduced by Cherry et al. (Int. J. Heat Fluid Flow 29:803–811, 2008). Results have been exhaustively compared with the published data with a quite good agreement. Additionally, further turbulent statistics have been provided such as the Reynolds stresses or the turbulent kinetic energy. A proper orthogonal decomposition and a dynamic mode decomposition analyses of the main flow variables have been performed to identify the main characteristics of the large-scale motions. A combined, self-induced movement of the large-scales has been found to originate in the top-right expansion corner with two clear features. A low-frequency diagonal cross-stream travelling wave first reported by Malm et al. (J. Fluid Mech. 699:320–351, 2012), has been clearly identified in the spatial modes of the stream-wise velocity components and the pressure, associated with the narrow band frequency of St¿[0.083,0.01] . This movement is caused by the geometrical expansion of the diffuser in the cross-stream direction. A second low-frequency trait has been identified associated with the persisting secondary flows and acting as a back and forth global accelerating-decelerating motion located on the straight area of the diffuser, with associated frequencies of St<0.005 . The smallest frequency observed in this work has been St=0.0013 . This low-frequency observed in the Stanford diffuser points out the need for longer simulations in order to obtain further turbulent statistics., The research leading to this work has been partially funded by the European Project NextSim which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and co-founded by the Spanish Agencia Estatal de Investigacion (AEI) under grant agreement PCI2021-121962. Benet Eiximeno also acknowledges the financial support by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Refs: PID2020-116937RB-C21 and PID2020-116937RB-C22). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). He also acknowledges the support of the European Project HiFi-TURB which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814837. We also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain. The authors acknowledge the support of Departament de Recerca i Universitats de la Generalitat de Catalunya to the Research Group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Towards a machine learning model for explicit algebraic Reynolds stress modelling using multi-expression programming

  • Miró Jané, Arnau
  • Wallin, Stefan
  • Colombo, Alessandro
  • Temmerman, Lionel
  • Wunsch, Dirk
  • Lehmkuhl Barba, Oriol
A novel framework for a 5-term explicit algebraic Reynolds stress model has been proposed, which is suitable for machine learning procedures. Under this framework, high-fidelity datasets have been explored and post-processed. Through multi-expression programming, models have been obtained using these data. They have been thoroughly tested and present all the desirable features of a model. Implementation of these models in a numerical code has also been possible. Results have shown that they present a small upgrade over classical models for certain kinds of flows, thus showing that the physics have been captured well. It is proved that the present workflow can obtain valid expressions with similar to better performance than the baseline model., The research leading to this work has received funding within the HiFi-TURB project from the European Union’s Horizon2020 research and innovation programme under grant agreement No 814837. Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I)., Peer Reviewed, Postprint (published version)