Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Techno-economic assessment of solar photovoltaic electrification and calcium looping technology as decarbonisation pathways of alumina industry

  • Sáez-Guinoa, Javier
  • Senante, Inés
  • Llera-Sastresa, Eva
  • Romeo, Luis M.
Aluminium industry stands out as a significant source of CO2 emissions, due partially to the high energy demand of the alumina extraction stage. Accordingly, this study explores the implementation of direct resistive heating of mid-temperature processes in alumina production as an alternative to decrease CO2 emissions. Additionally, two different strategies are evaluated to decarbonize alumina industry: the generation of renewable electricity through solar photovoltaic panels and the integration of a CO2 capture plant based on calcium looping technology. This work comprehends the modelling and sizing of these plants and the assessment of their economic performance through the calculation of their Net Present Value and their respective payback periods. The integration of both strategies into an alumina refinery model reveals that electrification of low and mid-temperature processes yields a 15 % reduction in CO2 direct emissions, whereas calcium looping demonstrates the potential to capture 97 % of emissions with a 7 % energy penalty. Also, economic assessments indicate substantial potential for improvement through in-site electricity generation via solar photovoltaic panels, exhibiting a payback time of 4.5 years. Conversely, the feasibility of a calcium-looping plant is hindered by high capital expenses, necessitating a longer payback period of 19–24 years. Sensitivity analyses underscore the suitability of in-site renewable electricity generation, whereas carbon emission taxes emerge as crucial in incentivizing carbon-neutral processes, with thresholds around 95–125 €/tonne of CO2. Despite potential deviations from real industrial settings, this study provides evidence for environmentally friendly strategies in alumina production that demonstrate limited adverse effects on economic performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Eco-efficiency assessment of carbon capture and hydrogen transition as decarbonisation strategies in alumina production

  • Sáez de Guinoa Sentre, Javier
  • Senante, Inés
  • Pascual, Sara
  • Llera-Sastresa, Eva
  • Romeo, Luis M.
Studies seeking to thoroughly couple the environmental and economic performances of a process or product are becoming more prominent as the needs for decarbonisation grow. This study explores the use of Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) in the alumina extraction industry. Models for various thermal energy supply methods and CO2 mitigation strategies were developed to obtain an inventory for analysis and the environmental impacts and life-cycle costs of the supply chain were evaluated. Finally, economic and ecological results were integrated using eco-efficiency indices and a sensitivity analysis of the most significant variables detected was conducted. The research indicated that the integration of a calcium-looping plant to capture post-combusted CO2 could reduce 55.5% of the CO2 equivalent emissions, while also obtaining a better economic performance due to the CO2 avoided taxes. However, other environmental indicators had slightly more significant impacts because of the additional use of natural gas. The potential use of green hydrogen instead of natural gas could enable a 70.0% reduction in CO2 equivalent emissions, as well as a reduction in all other environmental indicators studied, except for water consumption. However, transitioning to green hydrogen production could incur higher costs. This study introduced an eco-efficiency ratio index, indicating that CO2 capture and storage proved to be the most eco-efficient scenario, regardless of economic fluctuations in CO2 emission taxes. The substitution of natural gas with green hydrogen also emerged as a viable eco-efficient solution, provided electricity prices remain below 0.045€/kWh.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Balancing energy, resources and emissions: a comparative analysis of alumina production technologies

  • Sáez-Guinoa, Javier
  • Pinheiro, Jean-Patrick
  • Llera-Sastresa, Eva
  • Romeo, Luis M.
The global demand for primary aluminium continues to rise, driving record productions of smelter-grade alumina. The main industrial route to produce alumina, the Bayer process, faces critical challenges, including the generation of bauxite residue and the high thermal energy demands reliant on fossil fuels. This study evaluates two alternative technologies, the Pedersen and AlSiCal processes, comparing their energy requirements, CO2 emissions and resources utilisation to those of the Bayer process. The Pedersen process integrates smelting-reduction of bauxite to co-produce alumina and pig iron, while the AlSiCal process, developed within the H2020 AlSiCal project, utilises anorthosite as feedstock to co-produce alumina, silica, and precipitated calcium carbonate. Both processes were modelled in Aspen Plus, with the Pedersen process based on industrial and literature references and the AlSiCal process validated through experimental tests. Despite their environmental advantages, both processes exhibit higher energy intensities compared to the Bayer process, with the Pedersen and AlSiCal processes requiring 13.6–14.3 GJ/tonne and 42.2 GJ/tonne of alumina, respectively. Nonetheless, the consideration of co-products through economic allocation significantly improved the interpretation of resource and energy performance, highlighting the potential of both routes to enhance resource utilisation and reduce waste generation. These findings highlight the technical and environmental potential of the Pedersen and AlSiCal processes as complementary routes for alumina production, utilising low-alumina bauxites and underexplored mineral resources to reduce emissions, mitigate waste, and address mineral scarcity. Although their industrial implementation requires further techno-economic assessment and market validation, the integration of renewable energy, commercialising by-products, and adopting circular economy principles can pave the way towards a more sustainable alumina industry.