Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Risk-targeted hazard maps for Spain

  • Kharazian, Alireza
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Agea-Medina, Noelia
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Many studies have demonstrated that the design of structures in a region through the uniform hazard principle does not guarantee a uniform collapse risk. Even in regions with similar Peak Ground Accelerations (PGAs) corresponding to the same mean return period, the seismic risk in terms of collapse probability will be significantly different mainly due to the shape of the hazard curves as well as uncertainties in structural capacities. In this paper, risk-targeted hazard mapping is being explored in peninsular Spain using a recently updated seismic hazard map. Since risk targeting involves multiple input parameters such as the model parameters of fragility curves, their variability was considered through their probability distribution as observed in reinforced concrete (RC) moment frame buildings, representing the most common building typology in Spain. The influence of the variation of these parameters on the risk results were investigated, and different assumptions for estimating the model parameters of fragility curves are illustrated. These assumptions were included in a fixed (generic) fragility curve or building-site-specific fragility curves. Different acceptable damage states (i.e., collapse and yielding) were considered concerning Spain’s seismicity level. Finally, the maps for risk-targeted design ground motions and risk coefficients are presented. It is outlined that the employment of risk-targeted analysis leads to the modifications for existing design ground motions due to the different shape of the hazard curves across Spain and considering the uncertainty of structural capacity. Moreover, it is found that using the building- and site-specific fragility curves could result in a more uniform seismic risk across the country.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Raspberry Shake-Based Rapid Structural Identification of Existing Buildings Subject to Earthquake Ground Motion: The Case Study of Bucharest

  • Özcebe, Ali Güney
  • Tiganescu, Alexandru
  • Ozer, Ekin
  • Negulescu, Caterina
  • Galiana-Merino, Juan José
  • Tubaldi, Enrico
  • Toma-Danila, Dragos
  • Molina-Palacios, Sergio
  • Kharazian, Alireza
  • Bozzoni, Francesca
  • Borzi, Barbara
  • Balan, Stefan Florin
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The Internet of things concept empowered by low-cost sensor technologies and headless computers has upscaled the applicability of vibration monitoring systems in recent years. Raspberry Shake devices are among those systems, constituting a crowdsourcing framework and forming a worldwide seismic network of over a thousand nodes. While Raspberry Shake devices have been proven to densify seismograph arrays efficiently, their potential for structural health monitoring (SHM) is still unknown and is open to discovery. This paper presents recent findings from existing buildings located in Bucharest (Romania) equipped with Raspberry Shake 4D (RS4D) devices, whose signal recorded under multiple seismic events has been analyzed using different modal identification algorithms. The obtained results show that RS4D modules can capture the building vibration behavior despite the short-duration and low-amplitude excitation sources. Based on 15 RS4D device readings from five different multistorey buildings, the results do not indicate damage in terms of modal frequency decay. The findings of this research propose a baseline for future seismic events that can track the changes in vibration characteristics as a consequence of future strong earthquakes. In summary, this research presents multi-device, multi-testbed, and multi-algorithm evidence on the feasibility of RS4D modules as SHM instruments, which are yet to be explored in earthquake engineering.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analysis of Radon Measurements in Relation to Daily Seismic Activity Rates in the Vrancea Region, Romania

  • Galiana-Merino, Juan José
  • Molina-Palacios, Sergio
  • Kharazian, Alireza
  • Toader, Victorin-Emilian
  • Moldovan, Iren-Adelina
  • Gómez, Igor
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Gómez, Igor|||/items/0a4def63-1644-41da-a031-5d47de253f7f
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
Many previous research studies have shown how local and even regional earthquakes can significantly affect the release of radon in the soil. The aim of this work is to investigate the relationship between radon measurements and the daily seismic activity rate and develop a methodology that allows estimating the seismic activity rate using only radon measurements. To carry out this study, the earthquake catalogue of the Vrancea region (Romania) has been used to estimate the daily seismic activity rate during a given time period, in which radon measurements were also recorded, from January 2016 to September 2020. The Vrancea zone represents the most active seismic zone in Europe and is located on the eastern edge of the strongly bent Carpathian arc. In the case of the radon measurements, seasonal behaviours and linear trends due to non-seismic factors have been identified and subsequently removed. The discrete wavelet transform has been used to analyse the radon signal at two different scales: long and short periods. From the analysis carried out on a long-period scale, an approximate linear relationship has been obtained between the radon series and the daily seismic activity rate, which provides insights into the behaviour of the seismic activity in the study region with only the radon information. In addition, the study reveals certain characteristics that could be used as precursors of earthquakes at different scales: weeks in the case of the estimated daily seismic activity rate, and days in the case of the short-period signal obtained by the wavelet analysis. The results obtained for this region allow us to hope that the analysis of the radon time series can become an effective complement to the conventional seismic analysis used in operational earthquake forecasting.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Vibration-Based and Near Real-Time Seismic Damage Assessment Adaptive to Building Knowledge Level

  • Ozer, Ekin
  • Özcebe, Ali Güney
  • Negulescu, Caterina
  • Kharazian, Alireza
  • Borzi, Barbara
  • Bozzoni, Francesca
  • Molina-Palacios, Sergio
  • Peloso, Simone
  • Tubaldi, Enrico
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
This paper presents a multi-level methodology for near real-time seismic damage assessment of multi-story buildings, tailored to the available level of knowledge and information from sensors. The proposed methodology relates changes in the vibratory characteristics of a building—evaluated via alternative dynamic identification techniques—to the European Macroseismic Scale (EMS-98) damage grades. Three distinct levels of knowledge are considered for the building, with damage classification made through (i) empirical formulation based on quantitative ranges reported in the literature, (ii) analytical formulation exploiting the effective stiffness concept, and (iii) numerical modelling including a simplified equivalent single-degree-of-freedom model or a detailed finite element model of the building. The scope of the study is twofold: to construct a framework for integrating structural health monitoring into seismic damage assessment and to evaluate consistencies/discrepancies among different identification techniques and model-based and model-free approaches. The experimental data from a multi-story building subject to sequential shaking are used to demonstrate the proposed methodology and compare the effectiveness of the different approaches to damage assessment. The results show that accurate damage estimates can be achieved not only using model-driven approaches with enhanced information but also model-free alternatives with scarce information.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

High spatial-resolution loss estimation using dense array strong-motion near-fault records. Case study for Hveragerði and the Mw 6.3 Ölfus earthquake, South Iceland

  • Darzi, Atefe
  • Bessason, Bjarni
  • Halldorsson, Benedikt
  • Molina-Palacios, Sergio
  • Kharazian, Alireza
  • Moosapoor, Mojtaba
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The most recent and costliest damaging earthquake in Iceland is the 𝑀w6.3 29-May-2008 Ölfus earthquake to date. In particular, Hveragerði town located in the extreme near-fault region, suffered intense horizontal peak ground accelerations (PGA) of ∼40–90%g and large amplitude and long-period near-fault pulses, recorded on a dense urban strong-motion array in the town. In this study we collated a high-spatial resolution exposure database (building-by-building) complete with actual reported losses and classified the buildings by building materials and construction year according to the code design requirements in place at the time. We took advantage of the array data and evaluated a set of well-known ground motion intensity measures (IM), including PGA, pseudo-acceleration response spectra at short-to-long periods, Arias Intensity and Cumulative Absolute Velocity. We applied empirical Bayesian kriging geostatistical analyses to generate high-resolution shakemaps and provide IM estimates for each building. The shakemaps showed significant and systematic variation of the IMs across the small study area, with the lowest ground motions observed centrally and highest values in the outskirts. Furthermore, correlation analysis was carried out for the damage ratio and the exposure data IMs, but only low-to-moderate correlations were observed. A key reason is the incurred losses were primarily due to damage to non-structural components, to which the code design requirements do not apply. We carried out a seismic loss assessment in Hveragerði for the earthquake scenario of the Ölfus earthquake both on building-by-building, and municipality levels of spatial resolution. We applied both local and global fragility models for associated with detail building typologies identified based on the SERA taxonomy scheme. The results show that the global fragility functions severely underestimate the seismic performance of the building stock, except for one-story reinforced concrete buildings, while overall the masonry buildings were associated with the most predicted and observed losses. On the other hand, the local models predicted losses that conformed well with the observed damages to timber and concrete buildings. The high-spatial resolution predictions of losses gave results that better correlated with the observed losses in most typologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Risk-targeted maps for Alicante province (Spain)

  • Kharazian, Alireza
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Agea-Medina, Noelia
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The areas with higher seismic risks in Spain are located in the South and South-East of Spain. For instance, the recent seismic hazard analysis performed in the Alicante and Elche have obtained a PGA of 200 cm/sec2 approximately in the region and indicated that the highest contribution to the seismic hazard comes from the seismicity due to the Crevillente and the Bajo Segura faults. Many studies have demonstrated that the design of structures in the region through the use of “uniform hazard” principle, does not guarantee that the collapse risk in the region is uniform as well, i.e., even in those regions with similar PGAs corresponding to the same mean return period, the seismic risk in terms of failure probability will be significantly different. A new approach called “risk targeting” has already been adopted by new generations of seismic codes and associated research, where the parameters are specified to ensure a tool for the design of buildings with a probability of collapse alike or at least harmonized throughout the area concerned. Consequently, in this study, we will focus on the evaluation of the collapse probability of the buildings and then developing the risk-targeted maps of the Alicante. Finally, the preliminary obtained results will be discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design and Implementation of a Wireless Sensor Network for Seismic Monitoring of Buildings

  • Jornet Monteverde, Julio Antonio
  • Galiana-Merino, Juan José
  • Soler Llorens, Juan Luis
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Jornet Monteverde, Julio Antonio|||/items/1e29090c-8b13-4ea4-9123-55619a881fdf
This article presents a new wireless seismic sensor network system, especially design for building monitoring. The designed prototype allows remote control, and remote and real-time monitoring of the recorded signals by any internet browser. The system is formed by several Nodes (based on the CC3200 microcontroller of Texas Instruments), which are in charge of digitizing the ambient vibrations registered by three-component seismic sensors and transmitting them to a central server. This server records all the received signals, but also allows their real-time visualization in several remote client browsers thanks to the JavaScript’s Node.js technology. The data transmission uses not only Wi-Fi technology, but also the existing network resources that nowadays can be found usually in any official or residential building (lowering deployment costs). A data synchronization scheme was also implemented to correct the time differences between the Nodes, but also the long-term drifts found in the internal clock of the microcontrollers (improving the quality of records). The completed system is a low-cost, open-hardware and open-software design. The prototype was tested in a real building, recording ambient vibrations in several floors and observing the differences due to the building structure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the calculation of smoothing kernels for seismic parameter spatial mapping: methodology and examples

  • Montiel-López, David
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Gómez, Igor
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Gómez, Igor|||/items/0a4def63-1644-41da-a031-5d47de253f7f
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
  • Montiel-López, David|||/items/9c58b84f-d070-428e-b957-a43770768a46
Spatial mapping is one of the most useful methods to display information about the seismic parameters of a certain area. As in b-value time series, there is a certain arbitrariness regarding the function selected as smoothing kernel (which plays the same role as the window size in time series). We propose a new method for the calculation of the smoothing kernel as well as its parameters. Instead of using the spatial cell-event distance we study the distance between events (event-event distance) in order to calculate the smoothing function, as this distance distribution gives information about the event distribution and the seismic sources. We examine three different scenarios: two shallow seismicity settings and one deep seismicity catalog. The first one, Italy, allows calibration and showcasing of the method. The other two catalogs: the Lorca region (Spain) and Vrancea County (Romania) are examples of different function fits and data treatment. For these two scenarios, the prior to earthquake and after earthquake b-value maps depict tectonic stress changes related to the seismic settings (stress relief in Lorca and stress build-up zone shifting in Vrancea). This technique could enable operational earthquake forecasting (OEF) and tectonic source profiling given enough data in the time span considered.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Development of a new tool for seismic risk assessment and multi-criteria decision making

  • Huang, Chen
  • Molina-Palacios, Sergio
  • Meslem, Abdelghani
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
The present paper introduces a new risk-informed based tool that can support disaster management authorities in making decisions in response to earthquakes at local and regional scales by using estimated physical and socio-economic losses. The risk-informed based tool is building upon existing risk assessment methods, and multi-criteria decision-making (MCDM) methodology. The integrated risk assessment methods are adapted from the earthquake loss estimation tool SELENA. The integrated MCDM methodology, allowing selection of optimal mitigation measures by taking into account the priorities and preferences of disaster management authorities, was developed within the EU Horizon 2020 TURNkey project [1]. The new tool presented in this study also allows easy integration and incorporation of existing database and models that can be openly available. The tool is characterized with user-friendly interface and flexible format of the input and output data, that can be easily understood by different actors in disaster risk management.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fundamental period relationship of RC-buildings in Alicante province (Spain). A first step to soil-structure resonance maps

  • Agea-Medina, Noelia
  • Kharazian, Alireza
  • Molina-Palacios, Sergio
  • Galiana-Merino, Juan José
  • Soler Llorens, Juan Luis
  • Galiana-Merino, Juan José|||/items/2aeffb6f-7a89-465b-a756-a9ca8b74bb42
  • Molina-Palacios, Sergio|||/items/3840fc9f-5100-466f-8908-a5ae04cf798d
South and South-East of Spain are the regions with a higher seismic hazard in Spain Consequently, all the municipalities in Alicante province has to develop seismic emergency planning. Besides, the south of Alicante province and, in particular, the cities of Elche and Alicante are located in a sedimentary deposit, which can reach hundreds of meters, so site effects can be important. Additionally, most of the building stock belongs to periods without seismic normative, increasing, therefore, their vulnerability. Furthermore, following the damage caused by earthquakes in Spain, it has been observed that there are significant differences in the spatial distribution of damage from site to site in buildings with similar seismic behavior, located in a similar site. Hence, many authors have stated that the main factor responsible for the different damage distribution could be the building height. The seismic response of a building depends on its dynamic characteristics (fundamental period, T, damping ratio, ξ, and modal shape) and on the input ground motion. Among the existing methods to determine the T and ξ parameters, the best ones probably are to record weak earthquakes (or near explosions) or induced vibrations inside the building. However, both techniques need a very expensive and time-consuming effort when it is applied to a large number of buildings. A possible alternative is the measurement of ambient vibrations. In this work, ambient vibration measurements were performed at the geometrical center of the plan on the top floor of buildings with different height and year of construction in the municipality of Alicante and Elche (both in the Alicante province), assuming that this point coincides with the mass center of the floor. The preliminary results follow a linear relationship between the number of stories and the fundamental period. Finally, the results have been used to estimate the probability of resonance in several districts of both municipalities.