Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Disaggregation of SMAP Soil Moisture at 20 m Resolution: Validation and Sub-Field Scale Analysis

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Bellvert, Joaquim
  • Merlin, Olivier
This paper introduces a modified version of the DisPATCh (Disaggregation based on Physical And Theoretical scale Change) algorithm to disaggregate an SMAP surface soil moisture (SSM) product at a 20 m spatial resolution, through the use of sharpened Sentinel-3 land surface temperature (LST) data. Using sharpened LST as a high resolution proxy of SSM is a novel approach that needs to be validated and can be employed in a variety of applications that currently lack in a product with a similar high spatio-temporal resolution. The proposed high resolution SSM product was validated against available in situ data for two different fields, and it was also compared with two coarser DisPATCh products produced, disaggregating SMAP through the use of an LST at 1 km from Sentinel-3 and MODIS. From the correlation between in situ data and disaggregated SSM products, a general improvement was found in terms of Pearson’s correlation coefficient (R) for the proposed high resolution product with respect to the two products at 1 km. For the first field analyzed, R was equal to 0.47 when considering the 20 m product, an improvement compared to the 0.28 and 0.39 for the 1 km products. The improvement was especially noticeable during the summer season, in which it was only possible to successfully capture field-specific irrigation practices at the 20 m resolution. For the second field, R was 0.31 for the 20 m product, also an improvement compared to the 0.21 and 0.23 for the 1 km product. Additionally, the new product was able to depict SSM spatial variability at a sub-field scale and a validation analysis is also proposed at this scale. The main advantage of the proposed product is its very high spatio-temporal resolution, which opens up new opportunities to apply remotely sensed SSM data in disciplines that require fine spatial scales, such as agriculture and water management., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Evaluation of transpiration in different almond production systems with two-source energy balance models from UAV thermal and multispectral imagery

  • Quintanilla-Albornoz, Manuel Antonio
  • Miarnau, Xavier
  • Pelechá, Ana
  • Casadesús, Jaume
  • García-Tejera, Omar
  • Bellvert, Joaquim
A growing number of intensive irrigated production systems of the almond crop have been established in recent years. However, there is little information regarding the crop water requirements. Remote sensing-based models such as the two-source energy balance (TSEB) have proven to be reliable ways to accurately estimate actual crop evapotranspiration. However, few efforts have been made to validate the transpiration with sap flow measurements in woody row crops with different production systems and water status. In this study, the TSEB Priestley-Taylor (TSEB-PT) and contextual approach (TSEB-2T) models were assessed to estimate canopy transpiration. In addition, the effect of applying a basic clumping index for heterogeneous randomly placed clumped canopies and a rectangular hedgerow clumping index on the TSEB transpiration estimation was assessed. The TSEB inputs were obtained from high resolution multispectral and thermal imagery using an unmanned aerial vehicle. The leaf area index (LAI), stem water potential (Ψstem) and fractional intercepted photosynthetically active radiation (fIPAR) were also measured. Significant differences were observed in transpiration between production systems and irrigation treatments. The combined use of the TSEB-2T with the C&N-R transmittance model gave the best transpiration estimations for all production systems and irrigation treatments. The use of in situ PAR transmittance in the TSEB-2T model significantly improved the root mean squared error. Thus, the better agreement observed with the TSEB when using the C&N-R model and in situ PAR transmittance highlights the importance of improving radiative transfer models for shortwave canopy transmittance, especially in woody row crops., This research was supported by the PRIMA ALTOS project (No. PCI2019-103649) funded by the Ministry of Science, Innovation and Universities of the Spanish government and by the internal IRTA's scholarship. The authors would also like to thank all the Efficient Use of Water in Agriculture program team, at the IRTA, for their technical support, as well as the Horizon 2020 Research and Innovation Program (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

PrISM at Operational Scale: Monitoring Irrigation District Water Use during Droughts

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Bellvert, Joaquim
  • Merlin, Olivier
  • Pellarin, Thierry
Efficient water management strategies are of utmost importance in drought-prone regions, given the fundamental role irrigation plays in avoiding yield losses and food shortages. Traditional methodologies for estimating irrigation amounts face limitations in terms of overall precision and operational scalability. This study proposes to estimate irrigation amounts from soil moisture (SM) data by adapting the PrISM (Precipitation Inferred from Soil Moisture) methodology. The PrISM assimilates SM into a simple Antecedent Precipitation Index (API) model using a particle filter approach, which allows the creation and estimation of irrigation events. The methodology is applied in a semi-arid region in the Ebro basin, located in the north-east of Spain (Catalonia), from 2016 to 2023. Multi-year drought, which started in 2020, particularly affected the region starting from the spring of 2023, which led to significant reductions in irrigation district water allocations in some of the areas of the region. This study demonstrates that the PrISM approach can correctly identify areas where water restrictions were adopted in 2023, and monitor the water usage with good performances and reliable results. When compared with in situ data for 8 consecutive years, PrISM showed a significant person’s correlation between 0.58 and 0.76 and a cumulative weekly root mean squared error (rmse) between 7 and 11 mm. Additionally, PrISM was applied to three irrigation districts with different levels of modernization, due to the different predominant irrigation systems: flood, sprinkler, and drip. This analysis underlined the strengths and limitations of PrISM depending on the irrigation techniques monitored. PrISM has good performances in areas irrigated by sprinkler and flood systems, while difficulties are present over drip irrigated areas, where the very localized and limited irrigation amounts could not be detected from SM observations., Giovanni Paolini received grant DIN2019-010652 from the Spanish Education Ministry (MICINN) and DI-2020-093 from the Catalan Agency of Research (AGAUR). The study was partially funded by the ACCWA project, funded by the European Commission Horizon 2020 Program for Research and Innovation (H2020), in the context of the Marie Skłodowska-Curie Research and Innovation Staff Exchange (RISE) action under the grant agreement No. 823965, and by the PRIMA ALTOS project (No. PCI2019-103649) of the Ministry of Science, Innovation and Universities of the Spanish government. The PRIMA IDEWA project is also acknowledged., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Performance of the Two-Source Energy Balance (TSEB) Model as a Tool for Monitoring the Response of Durum Wheat to Drought by High-Throughput Field Phenotyping

  • Gómez-Candón, David
  • Bellvert, Joaquim
  • Royo, Conxita
The current lack of efficient methods for high throughput field phenotyping is a constraint on the goal of increasing durum wheat yields. This study illustrates a comprehensive methodology for phenotyping this crop's water use through the use of the two-source energy balance (TSEB) model employing very high resolution imagery. An unmanned aerial vehicle (UAV) equipped with multispectral and thermal cameras was used to phenotype 19 durum wheat cultivars grown under three contrasting irrigation treatments matching crop evapotranspiration levels (ETc): 100%ETc treatment meeting all crop water requirements (450 mm), 50%ETc treatment meeting half of them (285 mm), and a rainfed treatment (122 mm). Yield reductions of 18.3 and 48.0% were recorded in the 50%ETc and rainfed treatments, respectively, in comparison with the 100%ETc treatment. UAV flights were carried out during jointing (April 4th), anthesis (April 30th), and grain-filling (May 22nd). Remotely-sensed data were used to estimate: (1) plant height from a digital surface model (H, R2 = 0.95, RMSE = 0.18m), (2) leaf area index from multispectral vegetation indices (LAI, R2 = 0.78, RMSE = 0.63), and (3) actual evapotranspiration (ETa) and transpiration (T) through the TSEB model (R2 = 0.50, RMSE = 0.24 mm/h). Compared with ground measurements, the four traits estimated at grain-filling provided a good prediction of days from sowing to heading (DH, r = 0.58–0.86), to anthesis (DA, r = 0.59–0.85) and to maturity (r = 0.67–0.95), grain-filling duration (GFD, r = 0.54–0.74), plant height (r = 0.62–0.69), number of grains per spike (NGS, r = 0.41–0.64), and thousand kernel weight (TKW, r = 0.37–0.42). The best trait to estimate yield, DH, DA, and GFD was ETa at anthesis or during grain filling. Better forecasts for yield-related traits were recorded in the irrigated treatments than in the rainfed one. These results show a promising perspective in the use of energy balance models for the phenotyping of large numbers of durum wheat genotypes under Mediterranean conditions., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Estimating multi-scale irrigation amounts using multi-resolution soil moisture data: A data-driven approach using PrISM

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Merlin, Olivier
  • Laluet, Pierre
  • Bellvert, Joaquim
  • Pellarin, Thierry
Irrigated agriculture is the primary driver of freshwater use and is continuously expanding. Precise knowledge of irrigation amounts is critical for optimizing water management, especially in semi-arid regions where water is a limited resource. This study proposed to adapt the PrISM (Precipitation inferred from Soil Moisture) methodology to detect and estimate irrigation events from soil moisture remotely sensed data. PrISM was originally conceived to correct precipitation products, assimilating Soil Moisture (SM) observations into an antecedent precipitation index (API) formula, using a particle filter scheme. This novel application of PrISM uses initial precipitation and SM observations to detect instances of water excess in the soil (not caused by precipitation) and estimates the amount of irrigation, along with its uncertainty. This newly proposed approach does not require extensive calibration and is adaptable to different spatial and temporal scales. The objective of this study was to analyze the performance of PrISM for irrigation amount estimation and compare it with current state-of-the-art approaches. To develop and test this methodology, a synthetic study was conducted using SM observations with various noise levels to simulate uncertainties and different spatial and temporal resolutions. The results indicated that a high temporal resolution (less than 3 days) is crucial to avoid underestimating irrigation amounts due to missing events. However, including a constraint on the frequency of irrigation events, deduced from the system of irrigation used at the field level, could overcome the limitation of low temporal resolution and significantly reduce underestimation of irrigation amounts. Subsequently, the developed methodology was applied to actual satellite SM products at different spatial scales (1 km and 100 m) over the same area. Validation was performed using in situ data at the district level of Algerri-Balaguer in Catalunya, Spain, where in situ irrigation amounts were available for various years. The validation resulted in a total Pearson’s correlation coefficient (r) of 0.80 and a total root mean square error (rmse) of 7.19 mm∕week for the years from 2017 to 2021. Additional validation was conducted at the field level in the Segarra-Garrigues irrigation district using in situ data from a field where SM profiles and irrigation amounts were continuously monitored. This validation yielded a total bi-weekly r of 0.81 and a total rmse of −9.34 mm∕14-days for the years from 2017 to 2021. Overall, the results suggested that PrISM can effectively estimate irrigation from SM remote sensing data, and the methodology has the potential to be applied on a large scale without requiring extensive calibration or site-specific knowledge., The first author received the grant DIN2019–010652 from the Spanish Education Ministry (MICINN) and DI-2020-093 from the Catalan Agency of Research (AGAUR). We are grateful for the financial support given by the ACCWA project, funded by the European Commission Horizon 2020 Program for Research and Innovation, in the context of the Marie Skłodowska-Curie Research and Innovation Staff Exchange (RISE) action under the grant agreement No. 823965, and by the PRIMA ALTOS project (No. PCI2019–103649) of the Ministry of Science, Innovation and Universities of the Spanish government. The PRIMA IDEWA project is also acknowledged., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Remote Sensing Energy Balance Model for the Assessment of Crop Evapotranspiration and Water Status in an Almond Rootstock Collection

  • Bellvert, Joaquim
  • Nieto, Héctor
  • Pelechá, Ana
  • Jofre-Čekalović, Christian
  • Zazurca, Lourdes
  • Miarnau, Xavier
One of the objectives of many studies conducted by breeding programs is to characterize and select rootstocks well-adapted to drought conditions. In recent years, field high-throughput phenotyping methods have been developed to characterize plant traits and to identify the most water use efficient varieties and rootstocks. However, none of these studies have been able to quantify the behavior of crop evapotranspiration in almond rootstocks under different water regimes. In this study, remote sensing phenotyping methods were used to assess the evapotranspiration of almond cv. “Marinada” grafted onto a rootstock collection. In particular, the two-source energy balance and Shuttleworth and Wallace models were used to, respectively, estimate the actual and potential evapotranspiration of almonds grafted onto 10 rootstock under three different irrigation treatments. For this purpose, three flights were conducted during the 2018 and 2019 growing seasons with an aircraft equipped with a thermal and multispectral camera. Stem water potential (Ψstem) was also measured concomitant to image acquisition. Biophysical traits of the vegetation were firstly assessed through photogrammetry techniques, spectral vegetation indices and the radiative transfer model PROSAIL. The estimates of canopy height, leaf area index and daily fraction of intercepted radiation had root mean square errors of 0.57 m, 0.24 m m–1 and 0.07%, respectively. Findings of this study showed significant differences between rootstocks in all of the evaluated parameters. Cadaman® and Garnem® had the highest canopy vigor traits, evapotranspiration, Ψstem and kernel yield. In contrast, Rootpac® 20 and Rootpac® R had the lowest values of the same parameters, suggesting that this was due to an incompatibility between plum-almond species or to a lower water absorption capability of the rooting system. Among the rootstocks with medium canopy vigor, Adesoto and IRTA 1 had a lower evapotranspiration than Rootpac® 40 and Ishtara®. Water productivity (WP) (kg kernel/mm water evapotranspired) tended to decrease with Ψstem, mainly in 2018. Cadaman® and Garnem® had the highest WP, followed by INRA GF-677, IRTA 1, IRTA 2, and Rootpac® 40. Despite the low Ψstem of Rootpac® R, the WP of this rootstock was also high., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Agronomic response, transpiration and water productivity of four almond production systems under different irrigation regimes

  • Quintanilla Albornoz, Manuel Antonio
  • Bellvert, Joaquim
  • Pelechá Pena, Ana
  • Miarnau, Xavier
In recent years, more intensive production systems have been developed, coinciding with a growing scarcity of water resources. This context underscores the imperative of prioritizing water productivity (WP) as a critical factor in choosing the optimal production system to minimize agricultural water use. This study aims to contribute by evaluating WP in almond orchards under four production systems: open vase with severe pruning (open vase), open vase with minimal pruning (open vase (MP)), central axis and hedgerow. Three irrigation treatments were applied over two consecutive growing seasons: fully irrigated, mild stress and severe stress. Crop transpiration was monitored over the two years using both sap flow sensors and the two-source energy balance (TSEB) model with remote sensing. The severe stress treatment exhibited a notable reduction in kernel yield and nut load of 31.6 % and 34.5 %, respectively, in the second year of water deficit. The hedgerow system tended to have similar kernel yield to the open vase (MP) and central axis systems, and higher compared to the open vase system. Additionally, both transpiration measurement methods revealed that hedgerow exhibited lower transpiration rates across all irrigation treatments. Therefore, the highest WP was observed in the hedgerow system throughout both studied years. Similar findings were derived from the analysis of long-term data. Our findings indicate that the hedgerow production system had the highest WP, averaging 0.43 kg m−3 historically, compared to 0.33 kg m−3 for the open vase, 0.34 kg m−3 for the open vase (MP), and 0.36 kg m−3 for the central axis systems., This research has been supported by the projects ET4DROUGHT (No. PID2021-127345OR-C31) and DIGISPAC (TED2021-131237B-C21), both funded by the Ministry of Science and Innovation (MICINN-AEI) of Spain, and by a mobility grant in the Incentives for Research Program 2024 of the IRTA., The authors would like to thank all the Efficient Use of Water in Agriculture and Fruit Production program teams at the Institute of Agrifood Research and Technology (IRTA) for their technical support, especially Laura Torguet, Omar Garcia-Tejera, Mercè Mata, Carles Paris, Ramón Girabet and Aurica Biru. We would also like to express our gratitude to the Horizon 2020 Research and Innovation Program (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Almond yield prediction at orchard scale using satellite-derived biophysical traits and crop evapotranspiration combined with machine learning

  • Quintanilla Albornoz, Manuel Antonio
  • Miarnau, Xavier
  • Pamies-Sans, Magí
  • Bellvert, Joaquim
Accurate almond yield prediction is essential for supporting decision-making across multiple scales, from individual growers to international markets. This is crucial in the Mediterranean region, where diminishing water resources pose significant challenges to the almond industry. In this study, remote sensing-based evapotranspiration estimates were evaluated for predicting almond yield at the orchard scale using machine learning (ML) algorithms. The almond prediction models were calibrated and validated using data provided by commercial growers, along with meteorological reanalysis and remote sensing products. The remote sensing products included: i) spectral indices, ii) vegetation biophysical traits retrieved from Sentinel-2, and iii) actual evapotranspiration (ETa) estimated using the Priestley-Taylor two-source energy balance (TSEB-PT) model driven by Copernicus-based data. Almond yield data were collected from commercial orchards located in Spain’s Ebro and Guadalquivir basins from 2017 to 2022. Data collected from growers enables the establishment of almond water production functions at the orchard scale, yielding results comparable to those reported in experimental study sites. Almond yield prediction models calibrated with remote sensing data demonstrated predictive accuracy comparable to that of models relying on ground-truth variables provided by farmers, such as irrigation, orchard age, tree density, and cultivar. Among them, the PMCRS model—which integrates the fraction of absorbed photosynthetically active radiation (fAPAR), the normalized difference moisture index (NDMI), canopy chlorophyll content (Cab), ETa, and meteorological data—achieved a RMSE of 399.1 kg ha-¹ in July. These findings highlight the potential of remote sensing-based models for accurately estimating almond yield. Furthermore, the PMCRS model proved scalable and effective when applied across four almond-producing regions in the Ebro basin. Future improvements may be realized through enhanced ETa retrieval using upcoming thermal satellite missions, integration of irrigation estimates, and the adoption of advanced machine learning and deep learning algorithms., The author(s) declare financial support was received for the research and/or publication of this article. This research was funded by the DIGISPAC project (TED2021-131237B-C21), from by the Ministry of Science, Innovation and Universities of the Spanish government and by the internal IRTA’s scholarship. The IRTA team is also supported by the CERCA Program, Government of Catalonia. The authors would also like to thank the Horizon 2020 Research and Innovation Program (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Dynamic Management Zones for Irrigation Scheduling

  • Fontanet, Mireia
  • Scudiero, Elia
  • Skaggs, Todd H.
  • Fernàndez-Garcia, Daniel
  • Ferrer, Francesc
  • Rodrigo, Gema
  • Bellvert, Joaquim
Irrigation scheduling decision-support tools can improve water use efficiency by matching irrigation recommendations to prevailing soil and crop conditions within a season. Yet, little research is available on how to support real-time precision irrigation that varies within-season in both time and space. We investigate the integration of remotely sensed NDVI time-series, soil moisture sensor measurements, and root zone simulation forecasts for in-season delineation of dynamic management zones (MZ) and for a variable rate irrigation scheduling in order to improve irrigation scheduling and crop performance. Delineation of MZ was conducted in a 5.8-ha maize field during 2018 using Sentinel-2 NDVI time-series and an unsupervised classification. The number and spatial extent of MZs changed through the growing season. A network of soil moisture sensors was used to interpret spatiotemporal changes of the NDVI. Soil water content was a significant contributor to changes in crop vigor across MZs through the growing season. Real-time cluster validity function analysis provided in-season evaluation of the MZ design. For example, the total within-MZ daily soil moisture relative variance decreased from 85% (early vegetative stages) to below 25% (late reproductive stages). Finally, using the Hydrus-1D model, a workflow for in-season optimization of irrigation scheduling and water delivery management was tested. Data simulations indicated that crop transpiration could be optimized while reducing water applications between 11 and 28.5% across the dynamic MZs. The proposed integration of spatiotemporal crop and soil moisture data can be used to support management decisions to effectively control outputs of crop × environment × management interactions., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Classification of Different Irrigation Systems at Field Scale Using Time-Series of Remote Sensing Data

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Merlin, Olivier
  • Pamies-Sans, Magí
  • Bellvert, Joaquim
Maps of irrigation systems are of critical value for a better understanding of the human impact on the water cycle, while they also present a very useful tool at the administrative level to monitor changes and optimize irrigation practices. This study proposes a novel approach for classifying different irrigation systems at field level by using remotely sensed data at subfield scale as inputs of different supervised machine learning (ML) models for time-series classification. The ML models were trained using ground-truth data from more than 300 fields collected during a field campaign in 2020 across an intensely cultivated region in Catalunya, Spain. Two hydrological variables retrieved from satellite data, actual evapotranspiration ( ETa ) and soil moisture ( SM ), showed the best results when used for classification, especially when combined together, retrieving a final accuracy of 90.1±2.7% . All the three ML models employed for the classification showed that they were able to distinguish different irrigation systems, regardless of the different crops present in each field. For all the different tests, the best performances were reached by ResNET, the only deep neural network model among the three tested. The resulting method enables the creation of maps of irrigation systems at field level and for large areas, delivering detailed information on the status and evolution of irrigation practices., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Feasibility of Using the Two-Source Energy Balance Model (TSEB) with Sentinel-2 and Sentinel-3 Images to Analyze the Spatio-Temporal Variability of Vine Water Status in a Vineyard

  • Bellvert, Joaquim
  • Jofre-Cekalovic, Christian
  • Pelechá, Ana
  • Mata, Mercè
  • Nieto, Héctor
In viticulture, detailed spatial information about actual evapotranspiration (ETa) and vine water status within a vineyard may be of particular utility when applying site-specific, precision irrigation management. Over recent decades, extensive research has been carried out in the use of remote sensing energy balance models to estimate and monitor ETa at the field level. However, one of the major limitations remains the coarse spatial resolution in the thermal infrared (TIR) domain. In this context, the recent advent of the Sentinel missions of the European Space Agency (ESA) has greatly improved the possibility of monitoring crop parameters and estimating ETa at higher temporal and spatial resolutions. In order to bridge the gap between the coarse-resolution Sentinel-3 thermal and the fine-resolution Sentinel-2 shortwave data, sharpening techniques have been used to downscale the Sentinel-3 land surface temperature (LST) from 1 km to 20 m. However, the accurate estimates of high-resolution LST through sharpening techniques are still unclear, particularly when intended to be used for detecting crop water stress. The goal of this study was to assess the feasibility of the two-source energy balance model (TSEB) using sharpened LST images from Sentinel-2 and Sentinel-3 (TSEB-PTS2+3) to estimate the spatio-temporal variability of actual transpiration (T) and water stress in a vineyard. T and crop water stress index (CWSI) estimates were evaluated against a vine water consumption model and regressed with in situ stem water potential (Ψstem). Two different TSEB approaches, using very high-resolution airborne thermal imagery, were also included in the analysis as benchmarks for TSEB-PTS2+3. One of them uses aggregated TIR data at the vine+inter-row level (TSEB-PTairb), while the other is based on a contextual method that directly, although separately, retrieves soil and canopy temperatures (TSEB-2T). The results obtained demonstrated that when comparing airborne Trad and sharpened S2+3 LST, the latter tend to be underestimated. This complicates the use of TSEB-PTS2+3 to detect crop water stress. TSEB-2T appeared to outperform all the other methods. This was shown by a higher R2 and slightly lower RMSD when compared with modelled T. In addition, regressions between T and CWSI-2T with Ψstem also produced the highest R2., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Assimilation of Sentinel-2 Biophysical Variables into a Digital Twin for the Automated Irrigation Scheduling of a Vineyard

  • Bellvert, Joaquim
  • Pelechá, Ana
  • Pàmies-Sans, Magí
  • Virgili, Jordi
  • Torres, Mireia
  • Casadesús, Jaume
Decision support systems (DSS) are needed to carry out precision irrigation. Key issues in this regard include how to deal with spatial variability and the adoption of deficit irrigation strategies at the field scale. A software application originally designed for water balance-based automated irrigation scheduling locally fine-tuned through the use of sensors has been further developed with the emerging paradigm of both digital twins and the Internet of Things (IoT). The aim of this research is to demonstrate the feasibility of automatically scheduling the irrigation of a commercial vineyard when adopting regulated deficit irrigation (RDI) strategies and assimilating in near real time the fraction of absorbed photosynthetically active radiation (fAPAR) obtained from Sentinel-2 imagery. In addition, simulations of crop evapotranspiration obtained by the digital twin were compared with remote sensing estimates using surface energy balance models and Copernicus-based inputs. Results showed that regression between instantaneous fAPAR and in situ measurements of the fraction of intercepted photosynthetically active radiation (fIPAR) had a coefficient of determination (R2) ranging from 0.61 to 0.91, and a root mean square deviation (RMSD) of 0.10. The conversion of fAPAR to a daily time step was dependent on row orientation. A site-specific automated irrigation scheduling was successfully adopted and an adaptive response allowed spontaneous adjustments in order to stress vines to a certain level at specific growing stages. Simulations of the soil water balance components performed well. The regression between digital twin simulations and remote sensing-estimated actual (two-source energy balance Priestley–Taylor modeling approach, TSEB-PTS2+S3) and potential (Penman–Monteith approach) evapotranspiration showed RMSD values of 0.98 mm/day and 1.14 mm/day, respectively., This research was funded by the projects IRRINTEGRAL (No. RTI2018-099949-R-C21) and DIGISPAC (No. TED2021-131237B-C21), both from the Ministry of Science, Innovation and Universities of the Spanish government., The authors would like to thank all the Efficient Use of Water in Agriculture program team at the IRTA for their technical support, as well as Family Torres winery. This study was undertaken as part of the Horizon 2020 Programme for Research and Innovation (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., info:eu-repo/semantics/publishedVersion
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Can We Use Satellite-Based Soil-Moisture Products at High Resolution to Investigate Land-Use Differences and Land–Atmosphere Interactions? A Case Study in the Savanna

  • Román Cascon, Carlos
  • Lothon, Marie
  • Lohou, Fabienne
  • Ojha, Nitu
  • Merlin, Olivier
  • Aragonés, David
  • González-Dugo, Maria P.
  • Andreu, Ana
  • Pellarin, Thierry
  • Brut, Aurore
  • Soriguer, Ramón C.
  • Díaz-Delgado, Ricardo
  • Hartogensis, Oscar
  • Yagüe, Carlos
The use of soil moisture (SM) measurements from satellites has grown in recent years, fostering the development of new products at high resolution. This opens the possibility of using them for certain applications that were normally carried out using in situ data. We investigated this hypothesis through two main analyses using two high-resolution satellite-based soil moisture (SBSM) products that combined microwave with thermal and optical data: (1) The Disaggregation based on Physical And Theoretical scale Change (DISPATCH) and, (2) The Soil Moisture Ocean Salinity-Barcelona Expert Center (SMOS-BEC Level 4). We used these products to analyse the SM differences among pixels with contrasting vegetation. This was done through the comparison of the SM measurements from satellites and the measurements simulated with a simple antecedent precipitation index (API) model, which did not account for the surface characteristics. Subsequently, the deviation of the SM from satellite with respect to the API model (bias) was analysed and compared for contrasting land use categories. We hypothesised that the differences in the biases of the varied categories could provide information regarding the water retention capacity associated with each type of vegetation. From the satellite measurements, we determined how the SM depended on the tree cover, i.e., the denser the tree cover, the higher the SM. However, in winter periods with light rain events, the tree canopy could dampen the moistening of the soil through interception and conducted higher SM in the open areas. This evolution of the SM differences that depended on the characteristics of each season was observed both from satellite and from in situ measurements taken beneath a tree and in grass on the savanna landscape. The agreement between both types of measurements highlighted the potential of the SBSM products to investigate the SM of each type of vegetation. We found that the results were clearer for DISPATCH, whose data was not smoothed spatially as it was in SMOS-BEC. We also tested whether the relationships between SM and evapotranspiration could be investigated using satellite data. The answer to this question was also positive but required removing the unrealistic high-frequency SM oscillations from the satellite data using a low pass filter. This improved the performance scores of the products and the agreement with the results from the in situ data. These results demonstrated the possibility of using SM data from satellites to substitute ground measurements for the study of land–atmosphere interactions, which encourages efforts to improve the quality and resolution of these measurements.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Can We Use Satellite-Based Soil-Moisture Products at High Resolution to Investigate Land-Use Differences and Land–Atmosphere Interactions? A Case Study in the Savanna

  • Román-Cascón, Carlos
  • Lothon, Marie
  • Lohou, Fabienne
  • Ojha, Nitu
  • Merlin, Olivier
  • Aragonés, David
  • González-Dugo, María Patrocinio
  • Andreu, Ana
  • Pellarin, Thierry
  • Brut, Aurore
  • Soriguer, Ramón C.
  • Díaz-Delgado, Ricardo
  • Hartogensis, Oscar
  • Yagüe, Carlos
The use of soil moisture (SM) measurements from satellites has grown in recent years, fostering the development of new products at high resolution. This opens the possibility of using them for certain applications that were normally carried out using in situ data. We investigated this hypothesis through two main analyses using two high-resolution satellite-based soil moisture (SBSM) products that combined microwave with thermal and optical data: (1) The Disaggregation based on Physical And Theoretical scale Change (DISPATCH) and, (2) The Soil Moisture Ocean Salinity-Barcelona Expert Center (SMOS-BEC Level 4). We used these products to analyse the SM differences among pixels with contrasting vegetation. This was done through the comparison of the SM measurements from satellites and the measurements simulated with a simple antecedent precipitation index (API) model, which did not account for the surface characteristics. Subsequently, the deviation of the SM from satellite with respect to the API model (bias) was analysed and compared for contrasting land use categories. We hypothesised that the differences in the biases of the varied categories could provide information regarding the water retention capacity associated with each type of vegetation. From the satellite measurements, we determined how the SM depended on the tree cover, i.e., the denser the tree cover, the higher the SM. However, in winter periods with light rain events, the tree canopy could dampen the moistening of the soil through interception and conducted higher SM in the open areas. This evolution of the SM differences that depended on the characteristics of each season was observed both from satellite and from in situ measurements taken beneath a tree and in grass on the savanna landscape. The agreement between both types of measurements highlighted the potential of the SBSM products to investigate the SM of each type of vegetation. We found that the results were clearer for DISPATCH, whose data was not smoothed spatially as it was in SMOS-BEC. We also tested whether the relationships between SM and evapotranspiration could be investigated using satellite data. The answer to this question was also positive but required removing the unrealistic high-frequency SM oscillations from the satellite data using a low pass filter. This improved the performance scores of the products and the agreement with the results from the in situ data. These results demonstrated the possibility of using SM data from satellites to substitute ground measurements for the study of land-atmosphere interactions, which encourages efforts to improve the quality and resolution of these measurements.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Drainage assessment of irrigation districts: on the precision and accuracy of four parsimonious models

  • Laluet, Pierre
  • Olivera-Guerra, Luis
  • Altés, Víctor
  • Rivalland, Vincent
  • Jeantet, Alexis
  • Tournebize, Julien
  • Cenobio-Cruz, Omar
  • Barella-Ortiz, Anaïs
  • Quintana-Seguí, Pere
  • Villar Mir, Josep Ma.
  • Merlin, Olivier
In semi-arid irrigated environments, agricultural drainage is at the heart of three agro-environmental issues: it is an indicator of water productivity, it is the main control to prevent soil salinization and waterlogging problems, and it is related to the health of downstream ecosystems. Crop water balance models combined with subsurface models can estimate drainage quantities and dynamics at various spatial scales. However, such models' precision (capacity of a model to fit the observed drainage using site-specific calibration) and accuracy (capacity of a model to approximate observed drainage using default input parameters) have not yet been assessed in irrigated areas. To fill the gap, this study evaluates four parsimonious drainage models based on the combination of two surface models (RU and SAMIR) and two subsurface models (Reservoir and SIDRA) with varying complexity levels: RU-Reservoir, RU-SIDRA, SAMIR-Reservoir, and SAMIR-SIDRA. All models were applied over two sub-basins of the Algerri–Balaguer irrigation district, northeastern Spain, equipped with surface and subsurface drains driving the drained water to general outlets where the discharge is continuously monitored. Results show that RU-Reservoir is the most precise (average KGE (Q0.5) of 0.87), followed by SAMIR-Reservoir (average KGE (Q0.5) of 0.79). However, SAMIR-Reservoir is the most accurate model for providing rough drainage estimates using the default input parameters provided in the literature., This study was supported by the IDEWA project (grant no. ANR-19-P026-003) of the Partnership for Research and Innovation in the Mediterranean Area (PRIMA) program and by the European Horizon 2020 ACCWA project (grant agreement no. 823965) in the context of the Marie Skłodowska-Curie research and innovation staff exchange (RISE) program.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Modeling actual water use under different irrigation regimes at district scale: Application to the FAO-56 dual crop coefficient method

  • Olivera-Guerra, Luis Enrique
  • Laluet, Pierre
  • Altés, Víctor
  • Ollivier, Chloé
  • Pageot, Yann
  • Paolini, Giovanni
  • Chavanon, Eric
  • Rivalland, Vincent
  • Boulet, Gilles
  • Villar Mir, Josep Ma.
  • Merlin, Olivier
The modeling of irrigation in land surface models are generally based on two soil moisture parameters SMthreshold and SMtarget at which irrigation automatically starts and stops, respectively. Typically, both parameters are usually set to optimal values allowing to fill the soil water reservoir with just the estimated right amount and to avoid crop water excess at all times. The point is that agricultural practices greatly vary according to many factors (climatological, crop, soil, technical, human, etc.). To fill the gap, we propose a new calibration method of SMthreshold and SMtarget to represent the irrigation water use in any (optimal, deficit or even over) irrigation regime. The approach is tested using the dual-crop coefficient FAO-56 model implemented at the field scale over an 8100 ha irrigation district in northeastern Spain where the irrigation water use is precisely monitored at the district scale. Both irrigation parameters are first retrieved at monthly scale from the irrigation observations of year 2019. The irrigation simulated by the FAO-56 model is then evaluated against observations at district and weekly scale over 5 years (2017–2021) separately. The performance of the newly calibrated irrigation module is also assessed by comparing it against three other modules with varying configurations including default estimates for SMthreshold and SMtarget. The proposed irrigation module obtains systematically the best performance for each of the 5 years with an overall correlation coefficient of 0.95 ± 0.02 and root-mean square error of 0.27 ± 0.07 hm3/week (0.64 ± 0.17 mm/day). Unlike the three irrigation modules used as benchmark, the new irrigation module is able to reproduce the farmers’ practices throughout the year, and especially, to simulate the actual water use in the deficit and excess irrigation regimes occurring in the study area in spring and summer, respectively., This study was supported by the IDEWA project ( ANR-19-P026-003 ) of the Partnership for research and innovation in the Mediterranean area ( PRIMA ) program and by the Horizon 2020 ACCWA project (grant agreement # 823965 ) in the context of Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) program. The authors wish to acknowledge the "Comunitat de Regants Canal Algerri Balaguer" and the Ebro Hydrographic Confederation (SAIH Ebro) for providing the observation irrigation data used in this study.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Retrieving the irrigation actually applied at district scale: assimilating high-resolution Sentinel-1-derived soil moisture data into a FAO-56-based model

  • Laluet, Pierre
  • Olivera-Guerra, Luis Enrique
  • Altés, Víctor
  • Paolini, Giovanni
  • Ouaadi, Nadia
  • Rivalland, Vincent
  • Jarlan, Lionel
  • Villar Mir, Josep Ma.
  • Merlin, Olivier
Irrigation is the most water consuming activity in the world. Knowing the timing and amount of irrigation that is actually applied is therefore fundamental for water managers. However, this information is rarely available at all scales and is subject to large uncertainties due to the wide variety of existing agricultural practices and associated irrigation regimes (full irrigation, deficit irrigation, or over-irrigation). To fill this gap, we propose a two-step approach based on 15 m resolution Sentinel-1 (S1) surface soil moisture (SSM) data to retrieve the actual irrigation at the weekly scale over an entire irrigation district. In a first step, the S1-derived SSM is assimilated into a FAO-56-based crop water balance model (SAMIR) to retrieve for each crop type both the irrigation amount (Idose) and the soil moisture threshold (SMthreshold) at which irrigation is triggered. To do this, a particle filter method is implemented, with particles reset each month to provide time-varying SMthreshold and Idose. In a second step, the retrieved SMthreshold and Idose values are used as input to SAMIR to estimate the weekly irrigation and its uncertainty. The assimilation approach (SSM-ASSIM) is tested over the 8000 hectare Algerri-Balaguer irrigation district located in northeastern Spain, where in situ irrigation data integrating the whole district are available at the weekly scale during 2019. For evaluation, the performance of SSM-ASSIM is compared with that of the default FAO-56 irrigation module (called FAO56-DEF), which sets the SMthreshold to the critical soil moisture value and systematically fills the soil reservoir for each irrigation event. In 2019, with an observed annual irrigation of 687 mm, SSM-ASSIM (FAO56-DEF) shows a root mean square deviation between retrieved and in situ irrigation of 6.7 (8.8) mm week-1, a bias of +0.3 (−1.4) mm week-1, and a Pearson correlation coefficient of 0.88 (0.78). The SSM-ASSIM approach shows great potential for retrieving the weekly water use over extended areas for any irrigation regime, including over-irrigation., This study was supported by the IDEWA project (ANR-19-P026-003) of the Partnership for research and innovation in the Mediterranean area (PRIMA) program and by the Horizon 2020 ACCWA project (grant agreement # 823965) in the context of the Marie Sklodowska-Curie research and innovation staff exchange (RISE) program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accounting for Almond Crop Water Use under Different Irrigation Regimes with a Two-Source Energy Balance Model and Copernicus-Based Inputs

  • Jofre-Čekalović, Christian
  • Nieto, Héctor
  • Girona, Joan
  • Pamies-Sans, Magi
  • Bellvert, Joaquim
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/), Accounting for water use in agricultural fields is of vital importance for the future prospects for enhancing water use efficiency. Remote sensing techniques, based on modelling surface energy fluxes, such as the two-source energy balance (TSEB), were used to estimate actual evapotranspiration (ETa) on the basis of shortwave and thermal data. The lack of high temporal and spatial resolution of satellite thermal infrared (TIR) missions has led to new approaches to obtain higher spatial resolution images with a high revisit time. These new approaches take advantage of the high spatial resolution of Sentinel-2 (10–20 m), and the high revisit time of Sentinel-3 (daily). The use of the TSEB model with sharpened temperature (TSEBS2+S3) has recently been applied and validated in several study sites. However, none of these studies has applied it in heterogeneous row crops under different water status conditions within the same orchard. This study assessed the TSEBS2+S3 modelling approach to account for almond crop water use under four different irrigation regimes and over four consecutive growing seasons (2017–2020). The energy fluxes were validated with an eddy covariance system and also compared with a soil water balance model. The former reported errors of 90 W/m2 and 87 W/m2 for the sensible (H) and latent heat flux (LE), respectively. The comparison of ETa with the soil water balance model showed a root-mean-square deviation (RMSD) ranging from 0.6 to 2.5 mm/day. Differences in cumulative ETa between the irrigation treatments were estimated, with maximum differences obtained in 2019 of 20% to 13% less in the most water-limited treatment compared to the most well-watered one. Therefore, this study demonstrates the feasibility of using the TSEBS2+S3 for monitoring ETa in almond trees under different water regimes., The authors would also like to thank all the Efficient Use of Water in Agriculture program team, at the IRTA, for their technical support, the “Diputació de Lleida” for allowing us to conduct this study in the almond orchard experimental station, as well as the Horizon 2020 Programme for Research and Innovation (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of upscaling methodologies for daily crop transpiration using sap flows and two-source energy balance models in almonds under different water statuses and production systems

  • Quintanilla-Albornoz, Manuel
  • Miarnau, Xavier
  • Pelechá, Ana
  • Nieto, Héctor
  • Bellvert, Joaquim
Daily transpiration (Td) is crucial for both irrigation water management and increasing crop water productivity. The use of the remote-sensing-based two-source energy balance model (TSEB) has proven to be robust in estimating plant transpiration and evaporation separately for various crops. However, remote sensing models provide instantaneous estimations, and so daily upscaling approaches are needed to estimate daily fluxes. Daily upscaling methodologies have not yet been examined to upscale solely transpiration in woody crops. In this regard, this study aims to evaluate the proper image acquisition time throughout the day and four methodologies used to retrieve Td in almond trees with different production systems and water statuses. Hourly transpiration (Th) was estimated using the TSEB contextual approach (Th-TSEB) with high-resolution imagery five times during two diurnal courses. The tested methodologies were the following: the simulated evaporative fraction variable (EFsim), irradiance (Rs), reference evapotranspiration (ETo), and potential evapotranspiration (ETp). These approaches were first evaluated with in situ sap flow (T-SF) data and were then applied to the Th-TSEB. Daily T-SF showed significant differences among production systems and levels of water stress. The EFsim and ETp methods correlated better with measured T-SF and reduced the underestimation observed using the Rs and ETo methods, especially at noon in the severely water-stressed trees. However, the daily upscaling approaches applied in the TSEB (Td-TSEB) failed to detect differences between production systems. The lack of sensibility of Th-TSEB among production systems poses a challenge when estimating Td in canopies with discontinuous architectural structures. The use of ETp as a reference variable could address this issue as it incorporates various aerodynamic and radiative properties associated with different canopy architectures that influence the daily Th-SF pattern. However, more accurate ETp estimates or more advanced ETp models are needed., The authors would like to thank the Efficient Use of Water in Agriculture team, at the IRTA, for their technical support, as well as the European Union Horizon 2020 Research and Innovation Program (H2020) of the European Commission in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement no. 823965., This research has been supported by the projects ET4DROUGHT (grant no. PID2021-127345OR-C31) and DIGISPAC (grant no. TED2021-131237B-C21), both funded by the Ministry of Science and Innovation (MICINN-AEI) of Spain., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dynamic Management Zones for Irrigation Scheduling

  • Fontanet, Mireia
  • Scudiero, Elia
  • Skaggs, Todd H.
  • Fernàndez-Garcia, Daniel
  • Ferrer, Francesc
  • Rodrigo, Gema
  • Bellvert, Joaquim
Irrigation scheduling decision-support tools can improve water use efficiency by matching irrigation recommendations to prevailing soil and crop conditions within a season. Yet, little research is available on how to support real-time precision irrigation that varies within-season in both time and space. We investigate the integration of remotely sensed NDVI time-series, soil moisture sensor measurements, and root zone simulation forecasts for in-season delineation of dynamic management zones (MZ) and for a variable rate irrigation scheduling in order to improve irrigation scheduling and crop performance. Delineation of MZ was conducted in a 5.8-ha maize field during 2018 using Sentinel-2 NDVI time-series and an unsupervised classification. The number and spatial extent of MZs changed through the growing season. A network of soil moisture sensors was used to interpret spatiotemporal changes of the NDVI. Soil water content was a significant contributor to changes in crop vigor across MZs through the growing season. Real-time cluster validity function analysis provided in-season evaluation of the MZ design. For example, the total within-MZ daily soil moisture relative variance decreased from 85% (early vegetative stages) to below 25% (late reproductive stages). Finally, using the Hydrus-1D model, a workflow for in-season optimization of irrigation scheduling and water delivery management was tested. Data simulations indicated that crop transpiration could be optimized while reducing water applications between 11 and 28.5% across the dynamic MZs. The proposed integration of spatiotemporal crop and soil moisture data can be used to support management decisions to effectively control outputs of crop × environment × management interactions., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Feasibility of Using the Two-Source Energy Balance Model (TSEB) with Sentinel-2 and Sentinel-3 Images to Analyze the Spatio-Temporal Variability of Vine Water Status in a Vineyard

  • Bellvert, Joaquim
  • Jofre-Cekalovic, Christian
  • Pelechá, Ana
  • Mata, Mercè
  • Nieto, Héctor
In viticulture, detailed spatial information about actual evapotranspiration (ETa) and vine water status within a vineyard may be of particular utility when applying site-specific, precision irrigation management. Over recent decades, extensive research has been carried out in the use of remote sensing energy balance models to estimate and monitor ETa at the field level. However, one of the major limitations remains the coarse spatial resolution in the thermal infrared (TIR) domain. In this context, the recent advent of the Sentinel missions of the European Space Agency (ESA) has greatly improved the possibility of monitoring crop parameters and estimating ETa at higher temporal and spatial resolutions. In order to bridge the gap between the coarse-resolution Sentinel-3 thermal and the fine-resolution Sentinel-2 shortwave data, sharpening techniques have been used to downscale the Sentinel-3 land surface temperature (LST) from 1 km to 20 m. However, the accurate estimates of high-resolution LST through sharpening techniques are still unclear, particularly when intended to be used for detecting crop water stress. The goal of this study was to assess the feasibility of the two-source energy balance model (TSEB) using sharpened LST images from Sentinel-2 and Sentinel-3 (TSEB-PTS2+3) to estimate the spatio-temporal variability of actual transpiration (T) and water stress in a vineyard. T and crop water stress index (CWSI) estimates were evaluated against a vine water consumption model and regressed with in situ stem water potential (Ψstem). Two different TSEB approaches, using very high-resolution airborne thermal imagery, were also included in the analysis as benchmarks for TSEB-PTS2+3. One of them uses aggregated TIR data at the vine+inter-row level (TSEB-PTairb), while the other is based on a contextual method that directly, although separately, retrieves soil and canopy temperatures (TSEB-2T). The results obtained demonstrated that when comparing airborne Trad and sharpened S2+3 LST, the latter tend to be underestimated. This complicates the use of TSEB-PTS2+3 to detect crop water stress. TSEB-2T appeared to outperform all the other methods. This was shown by a higher R2 and slightly lower RMSD when compared with modelled T. In addition, regressions between T and CWSI-2T with Ψstem also produced the highest R2., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Remote Sensing Energy Balance Model for the Assessment of Crop Evapotranspiration and Water Status in an Almond Rootstock Collection

  • Bellvert, Joaquim
  • Nieto, Héctor
  • Pelechá, Ana
  • Jofre-Čekalović, Christian
  • Zazurca, Lourdes
  • Miarnau, Xavier
One of the objectives of many studies conducted by breeding programs is to characterize and select rootstocks well-adapted to drought conditions. In recent years, field high-throughput phenotyping methods have been developed to characterize plant traits and to identify the most water use efficient varieties and rootstocks. However, none of these studies have been able to quantify the behavior of crop evapotranspiration in almond rootstocks under different water regimes. In this study, remote sensing phenotyping methods were used to assess the evapotranspiration of almond cv. “Marinada” grafted onto a rootstock collection. In particular, the two-source energy balance and Shuttleworth and Wallace models were used to, respectively, estimate the actual and potential evapotranspiration of almonds grafted onto 10 rootstock under three different irrigation treatments. For this purpose, three flights were conducted during the 2018 and 2019 growing seasons with an aircraft equipped with a thermal and multispectral camera. Stem water potential (Ψstem) was also measured concomitant to image acquisition. Biophysical traits of the vegetation were firstly assessed through photogrammetry techniques, spectral vegetation indices and the radiative transfer model PROSAIL. The estimates of canopy height, leaf area index and daily fraction of intercepted radiation had root mean square errors of 0.57 m, 0.24 m m–1 and 0.07%, respectively. Findings of this study showed significant differences between rootstocks in all of the evaluated parameters. Cadaman® and Garnem® had the highest canopy vigor traits, evapotranspiration, Ψstem and kernel yield. In contrast, Rootpac® 20 and Rootpac® R had the lowest values of the same parameters, suggesting that this was due to an incompatibility between plum-almond species or to a lower water absorption capability of the rooting system. Among the rootstocks with medium canopy vigor, Adesoto and IRTA 1 had a lower evapotranspiration than Rootpac® 40 and Ishtara®. Water productivity (WP) (kg kernel/mm water evapotranspired) tended to decrease with Ψstem, mainly in 2018. Cadaman® and Garnem® had the highest WP, followed by INRA GF-677, IRTA 1, IRTA 2, and Rootpac® 40. Despite the low Ψstem of Rootpac® R, the WP of this rootstock was also high., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Agronomic response, transpiration and water productivity of four almond production systems under different irrigation regimes

  • Quintanilla Albornoz, Manuel Antonio
  • Bellvert, Joaquim
  • Pelechá Pena, Ana
  • Miarnau, Xavier
In recent years, more intensive production systems have been developed, coinciding with a growing scarcity of water resources. This context underscores the imperative of prioritizing water productivity (WP) as a critical factor in choosing the optimal production system to minimize agricultural water use. This study aims to contribute by evaluating WP in almond orchards under four production systems: open vase with severe pruning (open vase), open vase with minimal pruning (open vase (MP)), central axis and hedgerow. Three irrigation treatments were applied over two consecutive growing seasons: fully irrigated, mild stress and severe stress. Crop transpiration was monitored over the two years using both sap flow sensors and the two-source energy balance (TSEB) model with remote sensing. The severe stress treatment exhibited a notable reduction in kernel yield and nut load of 31.6 % and 34.5 %, respectively, in the second year of water deficit. The hedgerow system tended to have similar kernel yield to the open vase (MP) and central axis systems, and higher compared to the open vase system. Additionally, both transpiration measurement methods revealed that hedgerow exhibited lower transpiration rates across all irrigation treatments. Therefore, the highest WP was observed in the hedgerow system throughout both studied years. Similar findings were derived from the analysis of long-term data. Our findings indicate that the hedgerow production system had the highest WP, averaging 0.43 kg m−3 historically, compared to 0.33 kg m−3 for the open vase, 0.34 kg m−3 for the open vase (MP), and 0.36 kg m−3 for the central axis systems., This research has been supported by the projects ET4DROUGHT (No. PID2021-127345OR-C31) and DIGISPAC (TED2021-131237B-C21), both funded by the Ministry of Science and Innovation (MICINN-AEI) of Spain, and by a mobility grant in the Incentives for Research Program 2024 of the IRTA., The authors would like to thank all the Efficient Use of Water in Agriculture and Fruit Production program teams at the Institute of Agrifood Research and Technology (IRTA) for their technical support, especially Laura Torguet, Omar Garcia-Tejera, Mercè Mata, Carles Paris, Ramón Girabet and Aurica Biru. We would also like to express our gratitude to the Horizon 2020 Research and Innovation Program (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Classification of Different Irrigation Systems at Field Scale Using Time-Series of Remote Sensing Data

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Merlin, Olivier
  • Pamies-Sans, Magí
  • Bellvert, Joaquim
Maps of irrigation systems are of critical value for a better understanding of the human impact on the water cycle, while they also present a very useful tool at the administrative level to monitor changes and optimize irrigation practices. This study proposes a novel approach for classifying different irrigation systems at field level by using remotely sensed data at subfield scale as inputs of different supervised machine learning (ML) models for time-series classification. The ML models were trained using ground-truth data from more than 300 fields collected during a field campaign in 2020 across an intensely cultivated region in Catalunya, Spain. Two hydrological variables retrieved from satellite data, actual evapotranspiration ( ETa ) and soil moisture ( SM ), showed the best results when used for classification, especially when combined together, retrieving a final accuracy of 90.1±2.7% . All the three ML models employed for the classification showed that they were able to distinguish different irrigation systems, regardless of the different crops present in each field. For all the different tests, the best performances were reached by ResNET, the only deep neural network model among the three tested. The resulting method enables the creation of maps of irrigation systems at field level and for large areas, delivering detailed information on the status and evolution of irrigation practices., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluation of transpiration in different almond production systems with two-source energy balance models from UAV thermal and multispectral imagery

  • Quintanilla-Albornoz, Manuel Antonio
  • Miarnau, Xavier
  • Pelechá, Ana
  • Casadesús, Jaume
  • García-Tejera, Omar
  • Bellvert, Joaquim
A growing number of intensive irrigated production systems of the almond crop have been established in recent years. However, there is little information regarding the crop water requirements. Remote sensing-based models such as the two-source energy balance (TSEB) have proven to be reliable ways to accurately estimate actual crop evapotranspiration. However, few efforts have been made to validate the transpiration with sap flow measurements in woody row crops with different production systems and water status. In this study, the TSEB Priestley-Taylor (TSEB-PT) and contextual approach (TSEB-2T) models were assessed to estimate canopy transpiration. In addition, the effect of applying a basic clumping index for heterogeneous randomly placed clumped canopies and a rectangular hedgerow clumping index on the TSEB transpiration estimation was assessed. The TSEB inputs were obtained from high resolution multispectral and thermal imagery using an unmanned aerial vehicle. The leaf area index (LAI), stem water potential (Ψstem) and fractional intercepted photosynthetically active radiation (fIPAR) were also measured. Significant differences were observed in transpiration between production systems and irrigation treatments. The combined use of the TSEB-2T with the C&N-R transmittance model gave the best transpiration estimations for all production systems and irrigation treatments. The use of in situ PAR transmittance in the TSEB-2T model significantly improved the root mean squared error. Thus, the better agreement observed with the TSEB when using the C&N-R model and in situ PAR transmittance highlights the importance of improving radiative transfer models for shortwave canopy transmittance, especially in woody row crops., This research was supported by the PRIMA ALTOS project (No. PCI2019-103649) funded by the Ministry of Science, Innovation and Universities of the Spanish government and by the internal IRTA's scholarship. The authors would also like to thank all the Efficient Use of Water in Agriculture program team, at the IRTA, for their technical support, as well as the Horizon 2020 Research and Innovation Program (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Performance of the Two-Source Energy Balance (TSEB) Model as a Tool for Monitoring the Response of Durum Wheat to Drought by High-Throughput Field Phenotyping

  • Gómez-Candón, David
  • Bellvert, Joaquim
  • Royo, Conxita
The current lack of efficient methods for high throughput field phenotyping is a constraint on the goal of increasing durum wheat yields. This study illustrates a comprehensive methodology for phenotyping this crop's water use through the use of the two-source energy balance (TSEB) model employing very high resolution imagery. An unmanned aerial vehicle (UAV) equipped with multispectral and thermal cameras was used to phenotype 19 durum wheat cultivars grown under three contrasting irrigation treatments matching crop evapotranspiration levels (ETc): 100%ETc treatment meeting all crop water requirements (450 mm), 50%ETc treatment meeting half of them (285 mm), and a rainfed treatment (122 mm). Yield reductions of 18.3 and 48.0% were recorded in the 50%ETc and rainfed treatments, respectively, in comparison with the 100%ETc treatment. UAV flights were carried out during jointing (April 4th), anthesis (April 30th), and grain-filling (May 22nd). Remotely-sensed data were used to estimate: (1) plant height from a digital surface model (H, R2 = 0.95, RMSE = 0.18m), (2) leaf area index from multispectral vegetation indices (LAI, R2 = 0.78, RMSE = 0.63), and (3) actual evapotranspiration (ETa) and transpiration (T) through the TSEB model (R2 = 0.50, RMSE = 0.24 mm/h). Compared with ground measurements, the four traits estimated at grain-filling provided a good prediction of days from sowing to heading (DH, r = 0.58–0.86), to anthesis (DA, r = 0.59–0.85) and to maturity (r = 0.67–0.95), grain-filling duration (GFD, r = 0.54–0.74), plant height (r = 0.62–0.69), number of grains per spike (NGS, r = 0.41–0.64), and thousand kernel weight (TKW, r = 0.37–0.42). The best trait to estimate yield, DH, DA, and GFD was ETa at anthesis or during grain filling. Better forecasts for yield-related traits were recorded in the irrigated treatments than in the rainfed one. These results show a promising perspective in the use of energy balance models for the phenotyping of large numbers of durum wheat genotypes under Mediterranean conditions., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Disaggregation of SMAP Soil Moisture at 20 m Resolution: Validation and Sub-Field Scale Analysis

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Bellvert, Joaquim
  • Merlin, Olivier
This paper introduces a modified version of the DisPATCh (Disaggregation based on Physical And Theoretical scale Change) algorithm to disaggregate an SMAP surface soil moisture (SSM) product at a 20 m spatial resolution, through the use of sharpened Sentinel-3 land surface temperature (LST) data. Using sharpened LST as a high resolution proxy of SSM is a novel approach that needs to be validated and can be employed in a variety of applications that currently lack in a product with a similar high spatio-temporal resolution. The proposed high resolution SSM product was validated against available in situ data for two different fields, and it was also compared with two coarser DisPATCh products produced, disaggregating SMAP through the use of an LST at 1 km from Sentinel-3 and MODIS. From the correlation between in situ data and disaggregated SSM products, a general improvement was found in terms of Pearson’s correlation coefficient (R) for the proposed high resolution product with respect to the two products at 1 km. For the first field analyzed, R was equal to 0.47 when considering the 20 m product, an improvement compared to the 0.28 and 0.39 for the 1 km products. The improvement was especially noticeable during the summer season, in which it was only possible to successfully capture field-specific irrigation practices at the 20 m resolution. For the second field, R was 0.31 for the 20 m product, also an improvement compared to the 0.21 and 0.23 for the 1 km product. Additionally, the new product was able to depict SSM spatial variability at a sub-field scale and a validation analysis is also proposed at this scale. The main advantage of the proposed product is its very high spatio-temporal resolution, which opens up new opportunities to apply remotely sensed SSM data in disciplines that require fine spatial scales, such as agriculture and water management., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

PrISM at Operational Scale: Monitoring Irrigation District Water Use during Droughts

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Bellvert, Joaquim
  • Merlin, Olivier
  • Pellarin, Thierry
Efficient water management strategies are of utmost importance in drought-prone regions, given the fundamental role irrigation plays in avoiding yield losses and food shortages. Traditional methodologies for estimating irrigation amounts face limitations in terms of overall precision and operational scalability. This study proposes to estimate irrigation amounts from soil moisture (SM) data by adapting the PrISM (Precipitation Inferred from Soil Moisture) methodology. The PrISM assimilates SM into a simple Antecedent Precipitation Index (API) model using a particle filter approach, which allows the creation and estimation of irrigation events. The methodology is applied in a semi-arid region in the Ebro basin, located in the north-east of Spain (Catalonia), from 2016 to 2023. Multi-year drought, which started in 2020, particularly affected the region starting from the spring of 2023, which led to significant reductions in irrigation district water allocations in some of the areas of the region. This study demonstrates that the PrISM approach can correctly identify areas where water restrictions were adopted in 2023, and monitor the water usage with good performances and reliable results. When compared with in situ data for 8 consecutive years, PrISM showed a significant person’s correlation between 0.58 and 0.76 and a cumulative weekly root mean squared error (rmse) between 7 and 11 mm. Additionally, PrISM was applied to three irrigation districts with different levels of modernization, due to the different predominant irrigation systems: flood, sprinkler, and drip. This analysis underlined the strengths and limitations of PrISM depending on the irrigation techniques monitored. PrISM has good performances in areas irrigated by sprinkler and flood systems, while difficulties are present over drip irrigated areas, where the very localized and limited irrigation amounts could not be detected from SM observations., Giovanni Paolini received grant DIN2019-010652 from the Spanish Education Ministry (MICINN) and DI-2020-093 from the Catalan Agency of Research (AGAUR). The study was partially funded by the ACCWA project, funded by the European Commission Horizon 2020 Program for Research and Innovation (H2020), in the context of the Marie Skłodowska-Curie Research and Innovation Staff Exchange (RISE) action under the grant agreement No. 823965, and by the PRIMA ALTOS project (No. PCI2019-103649) of the Ministry of Science, Innovation and Universities of the Spanish government. The PRIMA IDEWA project is also acknowledged., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assimilation of Sentinel-2 Biophysical Variables into a Digital Twin for the Automated Irrigation Scheduling of a Vineyard

  • Bellvert, Joaquim
  • Pelechá, Ana
  • Pàmies-Sans, Magí
  • Virgili, Jordi
  • Torres, Mireia
  • Casadesús, Jaume
Decision support systems (DSS) are needed to carry out precision irrigation. Key issues in this regard include how to deal with spatial variability and the adoption of deficit irrigation strategies at the field scale. A software application originally designed for water balance-based automated irrigation scheduling locally fine-tuned through the use of sensors has been further developed with the emerging paradigm of both digital twins and the Internet of Things (IoT). The aim of this research is to demonstrate the feasibility of automatically scheduling the irrigation of a commercial vineyard when adopting regulated deficit irrigation (RDI) strategies and assimilating in near real time the fraction of absorbed photosynthetically active radiation (fAPAR) obtained from Sentinel-2 imagery. In addition, simulations of crop evapotranspiration obtained by the digital twin were compared with remote sensing estimates using surface energy balance models and Copernicus-based inputs. Results showed that regression between instantaneous fAPAR and in situ measurements of the fraction of intercepted photosynthetically active radiation (fIPAR) had a coefficient of determination (R2) ranging from 0.61 to 0.91, and a root mean square deviation (RMSD) of 0.10. The conversion of fAPAR to a daily time step was dependent on row orientation. A site-specific automated irrigation scheduling was successfully adopted and an adaptive response allowed spontaneous adjustments in order to stress vines to a certain level at specific growing stages. Simulations of the soil water balance components performed well. The regression between digital twin simulations and remote sensing-estimated actual (two-source energy balance Priestley–Taylor modeling approach, TSEB-PTS2+S3) and potential (Penman–Monteith approach) evapotranspiration showed RMSD values of 0.98 mm/day and 1.14 mm/day, respectively., This research was funded by the projects IRRINTEGRAL (No. RTI2018-099949-R-C21) and DIGISPAC (No. TED2021-131237B-C21), both from the Ministry of Science, Innovation and Universities of the Spanish government., The authors would like to thank all the Efficient Use of Water in Agriculture program team at the IRTA for their technical support, as well as Family Torres winery. This study was undertaken as part of the Horizon 2020 Programme for Research and Innovation (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Estimating multi-scale irrigation amounts using multi-resolution soil moisture data: A data-driven approach using PrISM

  • Paolini, Giovanni
  • Escorihuela, Maria Jose
  • Merlin, Olivier
  • Laluet, Pierre
  • Bellvert, Joaquim
  • Pellarin, Thierry
Irrigated agriculture is the primary driver of freshwater use and is continuously expanding. Precise knowledge of irrigation amounts is critical for optimizing water management, especially in semi-arid regions where water is a limited resource. This study proposed to adapt the PrISM (Precipitation inferred from Soil Moisture) methodology to detect and estimate irrigation events from soil moisture remotely sensed data. PrISM was originally conceived to correct precipitation products, assimilating Soil Moisture (SM) observations into an antecedent precipitation index (API) formula, using a particle filter scheme. This novel application of PrISM uses initial precipitation and SM observations to detect instances of water excess in the soil (not caused by precipitation) and estimates the amount of irrigation, along with its uncertainty. This newly proposed approach does not require extensive calibration and is adaptable to different spatial and temporal scales. The objective of this study was to analyze the performance of PrISM for irrigation amount estimation and compare it with current state-of-the-art approaches. To develop and test this methodology, a synthetic study was conducted using SM observations with various noise levels to simulate uncertainties and different spatial and temporal resolutions. The results indicated that a high temporal resolution (less than 3 days) is crucial to avoid underestimating irrigation amounts due to missing events. However, including a constraint on the frequency of irrigation events, deduced from the system of irrigation used at the field level, could overcome the limitation of low temporal resolution and significantly reduce underestimation of irrigation amounts. Subsequently, the developed methodology was applied to actual satellite SM products at different spatial scales (1 km and 100 m) over the same area. Validation was performed using in situ data at the district level of Algerri-Balaguer in Catalunya, Spain, where in situ irrigation amounts were available for various years. The validation resulted in a total Pearson’s correlation coefficient (r) of 0.80 and a total root mean square error (rmse) of 7.19 mm∕week for the years from 2017 to 2021. Additional validation was conducted at the field level in the Segarra-Garrigues irrigation district using in situ data from a field where SM profiles and irrigation amounts were continuously monitored. This validation yielded a total bi-weekly r of 0.81 and a total rmse of −9.34 mm∕14-days for the years from 2017 to 2021. Overall, the results suggested that PrISM can effectively estimate irrigation from SM remote sensing data, and the methodology has the potential to be applied on a large scale without requiring extensive calibration or site-specific knowledge., The first author received the grant DIN2019–010652 from the Spanish Education Ministry (MICINN) and DI-2020-093 from the Catalan Agency of Research (AGAUR). We are grateful for the financial support given by the ACCWA project, funded by the European Commission Horizon 2020 Program for Research and Innovation, in the context of the Marie Skłodowska-Curie Research and Innovation Staff Exchange (RISE) action under the grant agreement No. 823965, and by the PRIMA ALTOS project (No. PCI2019–103649) of the Ministry of Science, Innovation and Universities of the Spanish government. The PRIMA IDEWA project is also acknowledged., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Retrieving the irrigation actually applied at district scale: assimilating high-resolution Sentinel-1-derived soil moisture data into a FAO-56-based model

  • Laluet, Pierre
  • Olivera-Guerra, Luis Enrique
  • Altés, Víctor
  • Paolini, Giovanni
  • Ouaadi, Nadia
  • Rivalland, Vincent
  • Jarlan, Lionel
  • Villar Mir, Josep Ma.
  • Merlin, Olivier
Irrigation is the most water consuming activity in the world. Knowing the timing and amount of irrigation that is actually applied is therefore fundamental for water managers. However, this information is rarely available at all scales and is subject to large uncertainties due to the wide variety of existing agricultural practices and associated irrigation regimes (full irrigation, deficit irrigation, or over-irrigation). To fill this gap, we propose a two-step approach based on 15 m resolution Sentinel-1 (S1) surface soil moisture (SSM) data to retrieve the actual irrigation at the weekly scale over an entire irrigation district. In a first step, the S1-derived SSM is assimilated into a FAO-56-based crop water balance model (SAMIR) to retrieve for each crop type both the irrigation amount (Idose) and the soil moisture threshold (SMthreshold) at which irrigation is triggered. To do this, a particle filter method is implemented, with particles reset each month to provide time-varying SMthreshold and Idose. In a second step, the retrieved SMthreshold and Idose values are used as input to SAMIR to estimate the weekly irrigation and its uncertainty. The assimilation approach (SSM-ASSIM) is tested over the 8000 hectare Algerri-Balaguer irrigation district located in northeastern Spain, where in situ irrigation data integrating the whole district are available at the weekly scale during 2019. For evaluation, the performance of SSM-ASSIM is compared with that of the default FAO-56 irrigation module (called FAO56-DEF), which sets the SMthreshold to the critical soil moisture value and systematically fills the soil reservoir for each irrigation event. In 2019, with an observed annual irrigation of 687 mm, SSM-ASSIM (FAO56-DEF) shows a root mean square deviation between retrieved and in situ irrigation of 6.7 (8.8) mm week-1, a bias of +0.3 (−1.4) mm week-1, and a Pearson correlation coefficient of 0.88 (0.78). The SSM-ASSIM approach shows great potential for retrieving the weekly water use over extended areas for any irrigation regime, including over-irrigation., This study was supported by the IDEWA project (ANR-19-P026-003) of the Partnership for research and innovation in the Mediterranean area (PRIMA) program and by the Horizon 2020 ACCWA project (grant agreement # 823965) in the context of the Marie Sklodowska-Curie research and innovation staff exchange (RISE) program.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Almond yield prediction at orchard scale using satellite-derived biophysical traits and crop evapotranspiration combined with machine learning

  • Quintanilla Albornoz, Manuel Antonio
  • Miarnau, Xavier
  • Pamies-Sans, Magí
  • Bellvert, Joaquim
Accurate almond yield prediction is essential for supporting decision-making across multiple scales, from individual growers to international markets. This is crucial in the Mediterranean region, where diminishing water resources pose significant challenges to the almond industry. In this study, remote sensing-based evapotranspiration estimates were evaluated for predicting almond yield at the orchard scale using machine learning (ML) algorithms. The almond prediction models were calibrated and validated using data provided by commercial growers, along with meteorological reanalysis and remote sensing products. The remote sensing products included: i) spectral indices, ii) vegetation biophysical traits retrieved from Sentinel-2, and iii) actual evapotranspiration (ETa) estimated using the Priestley-Taylor two-source energy balance (TSEB-PT) model driven by Copernicus-based data. Almond yield data were collected from commercial orchards located in Spain’s Ebro and Guadalquivir basins from 2017 to 2022. Data collected from growers enables the establishment of almond water production functions at the orchard scale, yielding results comparable to those reported in experimental study sites. Almond yield prediction models calibrated with remote sensing data demonstrated predictive accuracy comparable to that of models relying on ground-truth variables provided by farmers, such as irrigation, orchard age, tree density, and cultivar. Among them, the PMCRS model—which integrates the fraction of absorbed photosynthetically active radiation (fAPAR), the normalized difference moisture index (NDMI), canopy chlorophyll content (Cab), ETa, and meteorological data—achieved a RMSE of 399.1 kg ha-¹ in July. These findings highlight the potential of remote sensing-based models for accurately estimating almond yield. Furthermore, the PMCRS model proved scalable and effective when applied across four almond-producing regions in the Ebro basin. Future improvements may be realized through enhanced ETa retrieval using upcoming thermal satellite missions, integration of irrigation estimates, and the adoption of advanced machine learning and deep learning algorithms., The author(s) declare financial support was received for the research and/or publication of this article. This research was funded by the DIGISPAC project (TED2021-131237B-C21), from by the Ministry of Science, Innovation and Universities of the Spanish government and by the internal IRTA’s scholarship. The IRTA team is also supported by the CERCA Program, Government of Catalonia. The authors would also like to thank the Horizon 2020 Research and Innovation Program (H2020) of the European Commission, in the context of the Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) action and ACCWA project: grant agreement No.: 823965., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Drainage assessment of irrigation districts: on the precision and accuracy of four parsimonious models

  • Laluet, Pierre
  • Olivera-Guerra, Luis
  • Altés, Víctor
  • Rivalland, Vincent
  • Jeantet, Alexis
  • Tournebize, Julien
  • Cenobio-Cruz, Omar
  • Barella-Ortiz, Anaïs
  • Quintana-Seguí, Pere
  • Villar Mir, Josep Ma.
  • Merlin, Olivier
In semi-arid irrigated environments, agricultural drainage is at the heart of three agro-environmental issues: it is an indicator of water productivity, it is the main control to prevent soil salinization and waterlogging problems, and it is related to the health of downstream ecosystems. Crop water balance models combined with subsurface models can estimate drainage quantities and dynamics at various spatial scales. However, such models' precision (capacity of a model to fit the observed drainage using site-specific calibration) and accuracy (capacity of a model to approximate observed drainage using default input parameters) have not yet been assessed in irrigated areas. To fill the gap, this study evaluates four parsimonious drainage models based on the combination of two surface models (RU and SAMIR) and two subsurface models (Reservoir and SIDRA) with varying complexity levels: RU-Reservoir, RU-SIDRA, SAMIR-Reservoir, and SAMIR-SIDRA. All models were applied over two sub-basins of the Algerri–Balaguer irrigation district, northeastern Spain, equipped with surface and subsurface drains driving the drained water to general outlets where the discharge is continuously monitored. Results show that RU-Reservoir is the most precise (average KGE (Q0.5) of 0.87), followed by SAMIR-Reservoir (average KGE (Q0.5) of 0.79). However, SAMIR-Reservoir is the most accurate model for providing rough drainage estimates using the default input parameters provided in the literature., This study was supported by the IDEWA project (grant no. ANR-19-P026-003) of the Partnership for Research and Innovation in the Mediterranean Area (PRIMA) program and by the European Horizon 2020 ACCWA project (grant agreement no. 823965) in the context of the Marie Skłodowska-Curie research and innovation staff exchange (RISE) program.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modeling actual water use under different irrigation regimes at district scale: Application to the FAO-56 dual crop coefficient method

  • Olivera-Guerra, Luis Enrique
  • Laluet, Pierre
  • Altés, Víctor
  • Ollivier, Chloé
  • Pageot, Yann
  • Paolini, Giovanni
  • Chavanon, Eric
  • Rivalland, Vincent
  • Boulet, Gilles
  • Villar Mir, Josep Ma.
  • Merlin, Olivier
The modeling of irrigation in land surface models are generally based on two soil moisture parameters SMthreshold and SMtarget at which irrigation automatically starts and stops, respectively. Typically, both parameters are usually set to optimal values allowing to fill the soil water reservoir with just the estimated right amount and to avoid crop water excess at all times. The point is that agricultural practices greatly vary according to many factors (climatological, crop, soil, technical, human, etc.). To fill the gap, we propose a new calibration method of SMthreshold and SMtarget to represent the irrigation water use in any (optimal, deficit or even over) irrigation regime. The approach is tested using the dual-crop coefficient FAO-56 model implemented at the field scale over an 8100 ha irrigation district in northeastern Spain where the irrigation water use is precisely monitored at the district scale. Both irrigation parameters are first retrieved at monthly scale from the irrigation observations of year 2019. The irrigation simulated by the FAO-56 model is then evaluated against observations at district and weekly scale over 5 years (2017–2021) separately. The performance of the newly calibrated irrigation module is also assessed by comparing it against three other modules with varying configurations including default estimates for SMthreshold and SMtarget. The proposed irrigation module obtains systematically the best performance for each of the 5 years with an overall correlation coefficient of 0.95 ± 0.02 and root-mean square error of 0.27 ± 0.07 hm3/week (0.64 ± 0.17 mm/day). Unlike the three irrigation modules used as benchmark, the new irrigation module is able to reproduce the farmers’ practices throughout the year, and especially, to simulate the actual water use in the deficit and excess irrigation regimes occurring in the study area in spring and summer, respectively., This study was supported by the IDEWA project ( ANR-19-P026-003 ) of the Partnership for research and innovation in the Mediterranean area ( PRIMA ) program and by the Horizon 2020 ACCWA project (grant agreement # 823965 ) in the context of Marie Sklodowska-Curie Research and Innovation Staff Exchange (RISE) program. The authors wish to acknowledge the "Comunitat de Regants Canal Algerri Balaguer" and the Ebro Hydrographic Confederation (SAIH Ebro) for providing the observation irrigation data used in this study.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Assessment of the hydrological impact of an hourly precipitation distribution correction method in the SASER modeling system

  • Cenobio Cruz, Omar|||0000-0001-5841-2858
  • Quintana Seguí, Pere|||0000-0002-7107-9671
  • Boone, Aaron
  • Le Moigne, Patrick
  • Garrote de Marcos, Luis|||0000-0001-9087-3638