Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

The worldwide C3S CORDEX grand ensemble: a major contribution to assess regional climate change in the IPCC AR6 atlas

  • Díez Sierra, Javier|||0000-0001-9053-2542
  • Iturbide Martínez de Albéniz, Maialen|||0000-0002-5048-0941
  • Gutiérrez Llorente, José Manuel
  • Fernández Fernández, Jesús (matemático)|||0000-0002-3483-0008
  • Milovac, Josipa|||0000-0001-5648-5279
  • Cofiño González, Antonio Santiago|||0000-0001-7719-979X
  • Cimadevilla Álvarez, Ezequiel|||0000-0002-8437-2068
  • Nikulin, Grigory
  • Levavasseur, Guillaume
  • Kjellström, Erik
  • Bülow, Katharina
  • Horányi, András
  • Brookshaw, Anca
  • García Díez, Markel
  • Pérez, Antonio
  • Baño Medina, Jorge|||0000-0003-3380-1579
  • Ahrens, Bodo
  • Alias, Antoinette
  • Ashfaq, Moetasim
  • Bukovsky, Melissa
The collaboration between the Coordinated Regional Climate Downscaling Experiment (CORDEX) and the Earth System Grid Federation (ESGF) provides open access to an unprecedented ensemble of regional climate model (RCM) simulations, across the 14 CORDEX continental-scale domains, with global coverage. These simulations have been used as a new line of evidence to assess regional climate projections in the latest contribution of the Working Group I (WGI) to the IPCC Sixth Assessment Report (AR6), particularly in the regional chapters and the Atlas. Here, we present the work done in the framework of the Copernicus Climate Change Service (C3S) to assemble a consistent worldwide CORDEX grand ensemble, aligned with the deadlines and activities of IPCC AR6. This work addressed the uneven and heterogeneous availability of CORDEX ESGF data by supporting publication in CORDEX domains with few archived simulations and performing quality control. It also addressed the lack of comprehensive documentation by compiling information from all contributing regional models, allowing for an informed use of data. In addition to presenting the worldwide CORDEX dataset, we assess here its consistency for precipitation and temperature by comparing climate change signals in regions with overlapping CORDEX domains, obtaining overall coincident regional climate change signals. The C3S CORDEX dataset has been used for the assessment of regional climate change in the IPCC AR6 (and for the interactive Atlas) and is available through the Copernicus Climate Data Store (CDS)., This work has been funded by the Copernicus Climate Change Service, implemented by ECMWF on behalf of the European Commission. JF and ASC acknowledge project CORDyS (PID2020-116595RB-I00) funded by MCIN/AEI/10.13039/501100011033. JMG and MI acknowledge project ATLAS (PID2019-111481RB-I00) funded by MCIN/AEI/10.13039/501100011033. ASC and EC acknowledge Project IS-ENES3 which is funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement 824084. JM acknowledges the support from the Spanish Agencia Estatal de Investigación through the Unidad de Excelencia María de Maeztu with Reference MDM-2017-0765. MED acknowledges the Partnership for advanced computing in Europe (PRACE) for awarding access to Piz Daint at ETH Zürich/Swiss National Supercomputing Centre (Switzerland), as well as the Federal Office for Meteorology and Climatology MeteoSwiss, the Swiss National Supercomputing Centre (CSCS), and ETH Zürich for their contributions to the development of the GPU-accelerated version of COSMO, COSMO-crCLIM
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The METACLIP semantic provenance framework for climate products

  • Bedia, Joaquín
  • San-Martín, Daniel
  • Iturbide, Maialen
  • Herrera, Sixto
  • Manzanas, Rodrigo
  • Gutiérrez, José M.
Having an effective way of dealing with data provenance is a necessary condition to ensure reproducibility, helping to build trust and credibility in research outcomes and the data products delivered. METACLIP (METAdata for CLImate Products) is a language-independent framework envisaged to tackle the problem of climate product provenance description. The solution is based on semantics exploiting the web standard Resource Description Framework (RDF), building on domain-specific extensions of standard vocabularies (e.g., PROV-O) describing the different aspects involved in climate product generation. We illustrate METACLIP through an example application within the open source R computing environment, generating a climate product for which full provenance information is recorded. Finally, the METACLIP Interpreter, a web-based interactive front-end for metadata visualization is presented, helping a diversity of users with different levels of expertise to trace and understand the provenance of a wide variety of climate data products, and to fully reproduce them., This work has been partially funded by the European Union’s Earth Observation Programme COPERNICUS, through the ITT C3S-51-Lot3 (QA4Seas Project, “Quality Assurance for Seasonal Forecast Products”), the Spain's Research and Innovation Programme under project INSIGNIA (co-funded by MINECO and FEDER, grant no. CGL2016-79210-R) and the European Union Research and Innovation Programme under projects IS-ENES2 (FP7 grant agreement no. 312979) and IS-ENES3 (H2020 grant agreement no. 824084).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A posteriori random forests for stochastic downscaling of precipitation by predicting probability distributions

  • Legasa, M. N.
  • Manzanas, Rodrigo
  • Calviño, A.
  • Gutiérrez, José M.
This work presents a comprehensive assessment of the suitability of random forests, a well-known machine learning technique, for the statistical downscaling of precipitation. Building on the experimental and validation framework proposed in the Experiment 1 of the COST action VALUE—the largest, most exhaustive intercomparison study of statistical downscaling methods to date—we introduce and thoroughly analyze a posteriori random forests (AP-RFs), which use all the information contained in the leaves to reliably predict the shape and scale parameters of the gamma probability distribution of precipitation on wet days. Therefore, as opposed to traditional random forests, which typically provide deterministic predictions, our AP-RFs allow realistic stochastic precipitation samples to be generated for wet days. Indeed, as compared to one particular implementation of a generalized linear model that exhibited an overall good performance in VALUE, our AP-RFs yield better distributional similarity with observations without loss of predictive power. Noteworthy, the new methodology proposed in this paper has substantial potential for hydrologists and other impact communities which are in need of local-scale, reliable stochastic climate information., The authors would like to acknowledge the projects MULTI-SDM (CGL2015-66583-R, MINECO/FEDER); IS-ENES3, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement ID 824084 (https://is.enes.org) and Contribución a la nueva generación de proyecciones climáticas regionales de CORDEX mediante técnicas dinámicas y estadísticas (CORDyS): PID2020-116595RB-I00, funded by the Agencia Estatal de Investigación of the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Implementation of FAIR principles in the IPCC: the WGI AR6 Atlas repository

  • Iturbide, Maialen
  • Fernández Martín, Jesús
  • Gutiérrez, José M.
  • Pirani, Anna
  • Huard, David
  • Al Khourdajie, Alaa
  • Baño-Medina, Jorge
  • Bedia, Joaquín
  • Casanueva, Ana
  • Cimadevilla, Ezequiel
  • Cofiño, Antonio S.
  • De Felice, Matteo
  • Diez-Sierra, Javier
  • García-Díez, M.
  • Goldie, James
  • Herrera, Dimitris A.
  • Herrera, Sixto
  • Manzanas, Rodrigo
  • Milovac, Josipa
  • Radhakrishnan, Aparna
  • San-Martín, Daniel
  • Spinuso, Alessandro
  • Thyng, Kristen M.
  • Trenham, Claire
  • Yelekçi, Özge
The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. We present the Atlas chapter of Working Group I (WGI) as a test case. We describe the application of the FAIR principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We introduce the open source repository resulting from this process, including coding (e.g., annotated Jupyter notebooks), data provenance, and some aggregated datasets used in some figures in the Atlas chapter and its interactive companion (the Interactive Atlas), open to scrutiny by the scientific community and the general public. We describe the informal pilot review conducted on this repository to gather recommendations that led to significant improvements. Finally, a working example illustrates the re-use of the repository resources to produce customized regional information, extending the Interactive Atlas products and running the code interactively in a web browser using Jupyter notebooks., We acknowledge partial funding from projects ATLAS (PID2019-111481RB-I00) funded by MCIN/AEI/10.13039/501100011033 and IS-ENES3 which is funded by the European Union’s H2020 programme under grant agreement No 824084. We also acknowledge the World Climate Research Programme’s Working Group on Coupled Modelling and Working Group on Regional Climate, responsible for CMIP and CORDEX, respectively. We also thank the climate modeling groups for producing and making available their model output, as described in the data-source folder of the repository. We also acknowledge the Earth System Grid Federation infrastructure, an international effort led by the U.S. Department of Energy’s Program for Climate Model Diagnosis and Intercomparison, the European Network for Earth System Modelling and other partners in the Global Organisation for Earth System Science Portals (GO-ESSP). The opinions expressed are those of the author(s) only and should not be considered as representative of the European Commission’s official position. JF and ASC acknowledge support from the CORDyS project (PID2020-116595RB-I00) funded by MCIN/AEI/10.13039/501100011033. JM acknowledges support from MDM-2017-0765 funded by MCIN/AEI/10.13039/501100011033. JBM acknowledges support from Universidad de Cantabria and Consejería de Universidades, Igualdad, Cultura y Deporte del Gobierno de Cantabria via the project “instrumentación y ciencia de datos para sondear la naturaleza del universo”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Worldwide C3S CORDEX grand ensemble: A major contribution to assess regional climate change in the IPCC AR6 Atlas

  • Diez-Sierra, Javier
  • Iturbide, Maialen
  • Gutiérrez, José M.
  • Fernández Martín, Jesús
  • Milovac, Josipa
  • Cofiño, Antonio S.
  • Cimadevilla, Ezequiel
  • Nikulin, Grigory
  • García-Díez, M.
  • Moreno-Pérez, Antonio J.
  • Baño-Medina, Jorge
et al., The collaboration between the Coordinated Regional Climate Downscaling Experiment (CORDEX) and the Earth System Grid Federation (ESGF) provides open access to an unprecedented ensemble of regional climate model (RCM) simulations, across the 14 CORDEX continental-scale domains, with global coverage. These simulations have been used as a new line of evidence to assess regional climate projections in the latest contribution of the Working Group I (WGI) to the IPCC Sixth Assessment Report (AR6), particularly in the regional chapters and the Atlas. Here, we present the work done in the framework of the Copernicus Climate Change Service (C3S) to assemble a consistent worldwide CORDEX grand ensemble, aligned with the deadlines and activities of IPCC AR6. This work addressed the uneven and heterogeneous availability of CORDEX ESGF data by supporting publication in CORDEX domains with few archived simulations and performing quality control. It also addressed the lack of comprehensive documentation by compiling information from all contributing regional models, allowing for an informed use of data. In addition to presenting the worldwide CORDEX dataset, we assess here its consistency for precipitation and temperature by comparing climate change signals in regions with overlapping CORDEX domains, obtaining overall coincident regional climate change signals. The C3S CORDEX dataset has been used for the assessment of regional climate change in the IPCC AR6 (and for the interactive Atlas) and is available through the Copernicus Climate Data Store (CDS)., This work has been funded by the Copernicus Climate Change Service, implemented by ECMWF on behalf of the European Commission. JF and ASC acknowledge project CORDyS (PID2020-116595RB-I00) funded by MCIN/AEI/10.13039/501100011033. JMG and MI acknowledge project ATLAS (PID2019-111481RB-I00) funded by MCIN/AEI/10.13039/501100011033. ASC and EC acknowledge Project IS-ENES3 which is funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement 824084. JM acknowledges the support from the Spanish Agencia Estatal de Investigación through the Unidad de Excelencia María de Maeztu with Reference MDM-2017-0765. MED acknowledges the Partnership for advanced computing in Europe (PRACE) for awarding access to Piz Daint at ETH Zürich/Swiss National Supercomputing Centre (Switzerland), as well as the Federal Office for Meteorology and Climatology MeteoSwiss, the Swiss National Supercomputing Centre (CSCS), and ETH Zürich for their contributions to the development of the GPU-accelerated version of COSMO, COSMO-crCLIM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of bias correction methods for a multivariate drought index: case study of the Upper Jhelum Basin

  • Ansari, Rubina
  • Casanueva, Ana
  • Liaqat, Muhammad Usman
  • Grossi, Giovanna
Bias correction (BC) is often a necessity to improve the applicability of global and regional climate model (GCM and RCM, respectively) outputs to impact assessment studies, which usually depend on multiple potentially dependent variables. To date, various BC methods have been developed which adjust climate variables separately (univariate BC) or jointly (multivariate BC) prior to their application in impact studies (i.e., the component-wise approach). Another possible approach is to first calculate the multivariate hazard index from the original, biased simulations and bias-correct the impact model output or index itself using univariate methods (direct approach). This has the advantage of circumventing the difficulties associated with correcting the inter-variable dependence of climate variables which is not considered by univariate BC methods., Using a multivariate drought index (i.e., standardized precipitation evapotranspiration index – SPEI) as an example, the present study compares different state-of-the-art BC methods (univariate and multivariate) and BC approaches (direct and component-wise) applied to climate model simulations stemming from different experiments at different spatial resolutions (namely Coordinated Regional Climate Downscaling Experiment (CORDEX), CORDEX Coordinated Output for Regional Evaluations (CORDEX-CORE), and 6th Coupled Intercomparison Project (CMIP6)). The BC methods are calibrated and evaluated over the same historical period (1986–2005). The proposed framework is demonstrated as a case study over a transboundary watershed, i.e., the Upper Jhelum Basin (UJB) in the Western Himalayas., Results show that (1) there is some added value of multivariate BC methods over the univariate methods in adjusting the inter-variable relationship; however, comparable performance is found for SPEI indices. (2) The best-performing BC methods exhibit a comparable performance under both approaches with a slightly better performance for the direct approach. (3) The added value of the high-resolution experiments (CORDEX-CORE) compared to their coarser-resolution counterparts (CORDEX) is not apparent in this study., This research has been supported by the cooperation agreement PFK PhD program 2019–2022 “Partnership for Knowledge-Platform 2: Health and WASH (WAter Sanitation and good Hygiene)” of the AICS-Italian Agency for Development Cooperation, the Erasmus Traineeship Program, Project COMPOUND (TED2021-131334A-I00) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and the Horizon 2020 project IS-ENES3 (grant agreement no. 824084)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Consistency of the regional response to global warming levels from CMIP5 and CORDEX projections

  • Diez-Sierra, Javier
  • Iturbide, Maialen
  • Fernández Martín, Jesús
  • Gutiérrez, José M.
  • Milovac, Josipa
  • Cofiño, Antonio S.
Assessing the regional responses to different Global Warming Levels (GWLs; e.g. + 1.5, 2, 3 and 4 ºC) is one of the most important challenges in climate change sciences since the Paris Agreement goal of keeping global temperature increase well below 2 °C with respect to the pre-industrial period. Regional responses to global warming were typically analyzed using global projections from Global Climate Models (GCMs) and, more recently, using higher resolution Regional Climate Models (RCMs) over limited regions. For instance, the IPCC AR6 WGI Atlas provides results of the regional response to different GWLs for several climate variables from both GCMs and RCMs. These results are calculated under the assumption that the regional signal to global warming is consistent between the GCMs and the nested RCMs. In the present study we investigate the above assumption by evaluating the consistency of regional responses to global warming from global (CMIP5) and regional (CORDEX) projections. The dataset aggregated over the new IPCC reference regions, available from the IPCC AR6 WGI Atlas repository, is analyzed here for temperature and precipitation. The existing relationships between the regional climate change signals and global warming are compared for both CMIP5 and CORDEX. Our results show significant linear scaling relationships between regional changes and global warming for most of the regions. CORDEX and CMIP5 show remarkably similar scaling relationships and similar robustness in the emergence of the climate change signal for most of the regions. These results support the use of regional climate models in the context of global warming level studies., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This work is part of project ATLAS (PID2019-111481RB-I00) funded by MCIN/AEI/10.13039/501100011033. JF and ASC acknowledge support from project CORDyS (PID2020-116595RB-I00) funded by MCIN/AEI/10.13039/501100011033. ASC acknowledges project IS-ENES3 which is funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 824084., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The IPCC Interactive Atlas DataLab: Online reusability for regional climate change assessment

  • Cimadevilla, Ezequiel
  • Iturbide, Maialen
  • Cofiño, Antonio S.
  • Fernández, Jesús
  • Sitz, Lina E.
  • Palacio, Aida
  • Heredia Canales, Andrés
  • Gutiérrez, José M.
The Sixth Assessment Report (AR6) of the IPCC highlights the regionally varying impacts of climate change on both mean and extreme conditions, with significant socio-economic impacts. A key innovation of AR6 is the Interactive Atlas, which provides spatial and temporal analysis of over 20 Climatic Impact-Drivers (CIDs), integrating global and regional projection datasets from the CMIP and CORDEX model intercomparison projects. The Interactive Atlas allows users to explore, compare and download products relevant to regional climate change risk assessment, while adhering to FAIR principles to ensure data accessibility and reusability. This paper describes additional work undertaken to further support these principles, acknowledging the challenges of processing large-scale datasets. We present a cloud-enabled data laboratory—DataLab— developed using R and Python frameworks for advanced analysis and visualization. The DataLab seamlessly integrates the gridded dataset underpinning the Interactive Atlas with computational resources, combining traditional remote data access services and modern cloud-based solutions to balance cost-effectiveness with technological advances. This comprehensive resource supports regional climate change assessment and could be used to inform national adaptation plans and strengthen climate change research and policy development., Ph.D. grant PRE2021-097646 funded by MICIU/AEI/10.13039/501100011033 and by ESF+ (to E.C.). IMPETUS4CHANGE, grant agreement no. 101081555, from the European Union’s Horizon Europe research and innovation programme (to J.F.). IS-ENES3, grant agreement no. 824084, from the European Union’s Horizon 2020 research and innovation programme (to A.C.)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Earth System Model Evaluation Tool (ESMValTool) v2.0 – diagnostics for extreme events, regional and impact evaluation, and analysis of Earth system models in CMIP

  • Weigel, Katja
  • Bock, Lisa
  • Gier, Bettina K.
  • Lauer, Axel
  • Lauer, Axel
  • Caron, Louis-Philippe|||0000-0001-5221-0147
  • Hunter, Alasdair
  • Lledó, Llorenç|||0000-0002-8628-6876
  • Pérez-Zanón, Núria|||0000-0001-8568-3071
  • Vegas-Regidor, Javier|||0000-0003-0096-4291
This paper complements a series of now four publications that document the release of the Earth System Model Evaluation Tool (ESMValTool) v2.0. It describes new diagnostics on the hydrological cycle, extreme events, impact assessment, regional evaluations, and ensemble member selection. The diagnostics are developed by a large community of scientists aiming to facilitate the evaluation and comparison of Earth system models (ESMs) which are participating in the Coupled Model Intercomparison Project (CMIP). The second release of this tool aims to support the evaluation of ESMs participating in CMIP Phase 6 (CMIP6). Furthermore, datasets from other models and observations can be analysed. The diagnostics for the hydrological cycle include several precipitation and drought indices, as well as hydroclimatic intensity and indices from the Expert Team on Climate Change Detection and Indices (ETCCDI). The latter are also used for identification of extreme events, for impact assessment, and to project and characterize the risks and impacts of climate change for natural and socio-economic systems. Further impact assessment diagnostics are included to compute daily temperature ranges and capacity factors for wind and solar energy generation. Regional scales can be analysed with new diagnostics implemented for selected regions and stochastic downscaling. ESMValTool v2.0 also includes diagnostics to analyse large multi-model ensembles including grouping and selecting ensemble members by user-specified criteria. Here, we present examples for their capabilities based on the well-established CMIP Phase 5 (CMIP5) dataset., This research has been supported by the Copernicus Climate Change Service (C3S) (Metrics and Access to Global Indices for Climate Projections (C3S-MAGIC), C3S_34a Lot 2), the Helmholtz-Gemeinschaft (Advanced Earth System Model Evaluation for CMIP (grant no. EVal4CMIP)), the Horizon 2020 Framework Programme, H2020 Societal Challenges (CRESCENDO (grant no. 641816)), the Federal Ministry of Education and Research (BMBF) (grant no. CMIP6-DICAD), and the Horizon 2020 Framework Programme, H2020 Excellent Science (IS-ENES3 (grant no. 824084)). The article processing charges for this open-access publication were covered by the University of Bremen., Peer Reviewed, "Article signat per 26 autors/es: Katja Weigel, Lisa Bock, Bettina K. Gier, Axel Lauer, Mattia Righi, Manuel Schlund, Kemisola Adeniyi, Bouwe Andela, Enrico Arnone, Peter Berg, Louis-Philippe Caron, Irene Cionni, Susanna Corti, Niels Drost, Alasdair Hunter, Llorenç Lledó, Christian Wilhelm Mohr, Aytaç Paçal, Núria Pérez-Zanón, Valeriu Predoi, Marit Sandstad, Jana Sillmann, Andreas Sterl, Javier Vegas-Regidor, Jost von Hardenberg, and Veronika Eyrin "
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The computational and energy cost of simulation and storage for climate science: lessons from CMIP6

  • Acosta Cobos, Mario César
  • Palomas Martínez, Sergi
  • Paronuzzi Ticco, Stella Valentina
  • Utrera Iglesias, Gladys Miriam|||0000-0002-0637-1297
  • Biercamp, Joachim
  • Bretonnière, Pierre-Antoine|||0000-0002-3066-6685
  • Budich, Reinhard
  • Castrillo Melguizo, Miguel
  • Caubel, Arnaud
  • Doblas Reyes, Francisco
The Coupled Model Intercomparison Project (CMIP) is one of the biggest international efforts aimed at better understanding the past, present, and future of climate changes in a multi-model context. A total of 21 model intercomparison projects (MIPs) were endorsed in its sixth phase (CMIP6), which included 190 different experiments that were used to simulate 40 000 years and produced around 40 PB of data in total. This paper presents the main findings obtained from the CPMIP (the Computational Performance Model Intercomparison Project), a collection of a common set of metrics, specifically designed for assessing climate model performance. These metrics were exclusively collected from the production runs of experiments used in CMIP6 and primarily from institutions within the IS-ENES3 consortium. The document presents the full set of CPMIP metrics per institution and experiment, including a detailed analysis and discussion of each of the measurements. During the analysis, we found a positive correlation between the core hours needed, the complexity of the models, and the resolution used. Likewise, we show that between 5 %–15 % of the execution cost is spent in the coupling between independent components, and it only gets worse by increasing the number of resources. From the data, it is clear that queue times have a great impact on the actual speed achieved and have a huge variability across different institutions, ranging from none to up to 78 % execution overhead. Furthermore, our evaluation shows that the estimated carbon footprint of running such big simulations within the IS-ENES3 consortium is 1692 t of CO2 equivalent. As a result of the collection, we contribute to the creation of a comprehensive database for future community reference, establishing a benchmark for evaluation and facilitating the multi-model, multi-platform comparisons crucial for understanding climate modelling performance. Given the diverse range of applications, configurations, and hardware utilised, further work is required for the standardisation and formulation of general rules. The paper concludes with recommendations for future exercises aimed at addressing the encountered challenges which will facilitate more collections of a similar nature., This research has been supported by the Barcelona Supercomputing Center (grant nos. PID2020116324RA-I00 (OEMES) and H2020-GA-824084 (ISENES))., Peer Reviewed, Article signat per 22 autors/es: Mario C. Acosta 1, Sergi Palomas 1, Stella V. Paronuzzi Ticco 1, Gladys Utrera 1, Joachim Biercamp 2, Pierre-Antoine Bretonniere 1, Reinhard Budich 3, Miguel Castrillo 1, Arnaud Caubel 4, Francisco Doblas-Reyes 1,14, Italo Epicoco 5, Uwe Fladrich 6, Sylvie Joussaume 4, Alok Kumar Gupta 7, Bryan Lawrence 8, Philippe Le Sager 9, Grenville Lister 8, Marie-Pierre Moine 10, Jean-Christophe Rioual 11, Sophie Valcke 10, Niki Zadeh 12, and Venkatramani Balaji 13 / 1- Barcelona Supercomputing Center, Plaça d’Eusebi Güell, 1–3, 08034 Barcelona, Spain; 2- German Climate Computing Centre, Bundesstraße 45a, 20146 Hamburg, Germany; 3- Max Planck Institute, Hofgartenstr. 8, 80539 Munich, Germany; 4- Institut Pierre-Simon Laplace, 11 Bd d’Alembert, 78280 Guyancourt, France; 5- Euro-Mediterranean Center on Climate Change, Via della Libertà, 12, 30121 Venice, Italy; 6- Swedish Meteorological and Hydrological Institute, 601 76 Norrköping, Sweden; 7- Norwegian Research Centre, Nygårdsgaten 112, 5008 Bergen, Norway; 8- National Centre for Atmospheric Science, Fairbairn House, 71–75 Clarendon Rd, Woodhouse, Leeds LS2 9PH, United Kingdom; 9- Royal Netherlands Meteorological Institute, Utrechtseweg 297, 3731 GA De Bilt, the Netherlands; 10- European Center for Advanced Research and Training in Scientific Computing, 42 Av. Gaspard Coriolis, 31100 Toulouse, France; 11- Meteorological Office, Fitzroy Road, Exeter, Devon, EX1 3PB, United Kingdom; 12- National Oceanic and Atmospheric Administration, 1401 Constitution Avenue NW, Room 5128, Washington, DC 20230, USA; 13- High Meadows Environmental Institute, Princeton University, Guyot Hall, Room 129, Princeton, NJ 08544-1003, USA; 14- Catalan Institution for Research and Advanced Studies, Passeig Lluís Companys 23, 08010 Barcelona, Spain
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Earth System Model Evaluation Tool (ESMValTool) v2.0 – an extended set of large-scale diagnostics for quasi-operational and comprehensive evaluation of Earth system models in CMIP

  • Eyring, Veronika
  • Bock, Lisa
  • Lauer, Axel
  • Righi, Mattia
  • Schlund, Manuel
  • Andela, Bouwe
  • Arnone, Enrico
  • Bellprat, Omar|||0000-0001-6434-1793
  • Brötz, Björn
  • Caron, Louis-Philippe|||0000-0001-5221-0147
  • Carvalhais, Nuno
  • Cionni, Irene
  • Cortesi, Nicola
  • Crezee, Bas
  • Davin, Edouard L.
  • Davini, Paolo
  • Debeire, Kevin
  • Mora, Lee, de
  • Deser, Clara
  • Docquier, David
  • Earnshaw, Paul
  • Ehbrecht, Carsten
  • Gier, Bettina K.
  • Gonzalez-Reviriego, Nube
  • Goodman, Paul
  • Hagemann, Stefan
  • Hardiman, Steven
  • Hassler, Birgit
  • Hunter, Alasdair
  • Kadow, Christopher
  • Kindermann, Stephan
  • Koirala, Sujan
  • Koldunov, Nikolay
  • Lejeune, Quentin
  • Lembo, Valerio
  • Lovato, Tomas
  • Lucarini, Valerio
  • Massonnet, François
  • Müller, Benjamin
  • Pandde, Amarjiit
  • Pérez-Zanón, Núria|||0000-0001-8568-3071
  • Phillips, Adam
  • Predoi, Valeriu
  • Russell, Joellen
  • Sellar, Alistair
  • Serva, Federico
  • Stacke, Tobias
  • Swaminathan, Ranjini
  • Torralba, Verónica|||0000-0002-8941-1548
  • Vegas-Regidor, Javier|||0000-0003-0096-4291
  • Hardenberg, Jost, von
  • Weigel, Katja
  • Zimmermann, Klaus
The Earth System Model Evaluation Tool (ESMValTool) is a community diagnostics and performance metrics tool designed to improve comprehensive and routine evaluation of Earth system models (ESMs) participating in the Coupled Model Intercomparison Project (CMIP). It has undergone rapid development since the first release in 2016 and is now a well-tested tool that provides end-to-end provenance tracking to ensure reproducibility. It consists of (1) an easy-to-install, well-documented Python package providing the core functionalities (ESMValCore) that performs common preprocessing operations and (2) a diagnostic part that includes tailored diagnostics and performance metrics for specific scientific applications. Here we describe large-scale diagnostics of the second major release of the tool that supports the evaluation of ESMs participating in CMIP Phase 6 (CMIP6). ESMValTool v2.0 includes a large collection of diagnostics and performance metrics for atmospheric, oceanic, and terrestrial variables for the mean state, trends, and variability. ESMValTool v2.0 also successfully reproduces figures from the evaluation and projections chapters of the Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment Report (AR5) and incorporates updates from targeted analysis packages, such as the NCAR Climate Variability Diagnostics Package for the evaluation of modes of variability, the Thermodynamic Diagnostic Tool (TheDiaTo) to evaluate the energetics of the climate system, as well as parts of AutoAssess that contains a mix of top–down performance metrics. The tool has been fully integrated into the Earth System Grid Federation (ESGF) infrastructure at the Deutsches Klimarechenzentrum (DKRZ) to provide evaluation results from CMIP6 model simulations shortly after the output is published to the CMIP archive. A result browser has been implemented that enables advanced monitoring of the evaluation results by a broad user community at much faster timescales than what was possible in CMIP5., This research has been supported by Horizon 2020 (grant nos. 641816, 727862, 641727, and 824084), the Copernicus Climate Change Service (C3S) (Metrics and Access to Global Indices for Climate Projections, MAGIC), the Helmholtz Association (Advanced Earth System Model Evaluation for CMIP, EVal4CMIP), the Deutsche Forschungsgemeinschaft (grant no. 274762653), the Federal Ministry of Education and Research (BMBF) (grant no. CMIP6-DICAD), and the European Space Agency (ESA Climate Change Initiative Climate Model User Group, ESA CCI CMUG)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Coordinating an operational data distribution network for CMIP6 data

  • Petrie, Ruth
  • Denvil, Sébastien
  • Ames, Sasha
  • Levavasseur, Guillaume
  • Bretonnière, Pierre-Antoine|||0000-0002-3066-6685
  • Serradell Maronda, Kim|||0000-0001-8230-4347
The distribution of data contributed to the Coupled Model Intercomparison Project Phase 6 (CMIP6) is via the Earth System Grid Federation (ESGF). The ESGF is a network of internationally distributed sites that together work as a federated data archive. Data records from climate modelling institutes are published to the ESGF and then shared around the world. It is anticipated that CMIP6 will produce approximately 20 PB of data to be published and distributed via the ESGF. In addition to this large volume of data a number of value-added CMIP6 services are required to interact with the ESGF; for example the citation and errata services both interact with the ESGF but are not a core part of its infrastructure. With a number of interacting services and a large volume of data anticipated for CMIP6, the CMIP Data Node Operations Team (CDNOT) was formed. The CDNOT coordinated and implemented a series of CMIP6 preparation data challenges to test all the interacting components in the ESGF CMIP6 software ecosystem. This ensured that when CMIP6 data were released they could be reliably distributed., This international collaborative work was funded through various agencies. Co-authors at Lawrence Berkeley National Laboratory were funded under contract no. DE-AC02-05CH11231, and co-authors at Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344 with the US Department of Energy. European co-authors were supported by the European Union Horizon 2020 IS-ENES3 project (grant agreement no. 824084). CNRM participants were additionally funded by the French National Research Agency project CONVERGENCE (grant ANR-13-MONU-0008-02). Co-authors from NCI were supported by the National Collaborative Research Infrastructure Strategy (NCRIS)-funded National Computational Infrastructure (NCI) Australia and the Australian Research Data Commons (ARDC)., Peer Reviewed, "Article signat per 38 autors: Ruth Petrie, Sébastien Denvil, Sasha Ames, Guillaume Levavasseur, Sandro Fiore, Chris Allen, Fabrizio Antonio, Katharina Berger, Pierre-Antoine Bretonnière, Luca Cinquini, Eli Dart, Prashanth Dwarakanath, Kelsey Druken, Ben Evans, Laurent Franchistéguy, Sébastien Gardoll, Eric Gerbier, Mark Greenslade, David Hassell, Alan Iwi, Martin Juckes, Stephan Kindermann, Lukasz Lacinski, Maria Mirto, Atef Ben Nasser, Paola Nassisi, Eric Nienhouse, Sergey Nikonov, Alessandra Nuzzo, Clare Richards, Syazwan Ridzwan, Michel Rixen, Kim Serradell, Kate Snow, Ag Stephens, Martina Stockhause, Hans Vahlenkamp, and Rick Wagner"
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Reducing time and computing costs in EC-Earth: an automatic load-balancing approach for coupled Earth system models

  • Palomas Martínez, Sergi
  • Acosta Cobos, Mario César
  • Utrera Iglesias, Gladys Miriam|||0000-0002-0637-1297
  • Tourigny, Etienne|||0000-0003-4628-1461
Earth system models (ESMs) are intricate models employed for simulating the Earth's climate, typically constructed from distinct independent components dedicated to simulate specific natural phenomena (such as atmosphere and ocean dynamics, atmospheric chemistry, land and ocean biosphere). In order to capture the interactions between these processes, ESMs utilize coupling libraries, which oversee the synchronization and field exchanges among independent developed codes typically operating in parallel as a multi-program, multiple data (MPMD) application. The performance achieved depends on the coupling approach, as well as on the number of parallel resources and scalability properties of each component. Determining the appropriate number of resources to use for each component in coupled ESMs is crucial for efficient utilization of the high-performance computing (HPC) infrastructures used in climate modeling. However, this task traditionally involves manual testing of multiple process allocations by trial and error, requiring significant time investment from researchers and making the process more error-prone, often resulting in a loss of application performance due to the complexity of the task. This paper introduces the automatic load-balance tool (auto-lb), a methodology and tool for determining the resource allocation to each component within coupled ESMs, aimed at improving the application's performance. Notably, this methodology is automatic and does not require expertise in HPC to improve the performance achieved by coupled ESMs. This is accomplished by minimizing the load imbalance: reducing each constituent's execution cost (core hours), as well as minimizing the core hours wasted resulting from the synchronizations between them, without penalizing the execution speed of the entire model. This optimization is achieved regardless of the scalability properties of each constituent and the complexity of their dependencies during the coupling. To achieve this, we designed a new performance metric called “fittingness” to assess the performance of coupled execution, evaluating the trade-off between parallel efficiency and application throughput. This metric is intended for scenarios where optimality can depend on various criteria and constraints. Aiming for maximum speed might not be desirable if it leads to a decrease in parallel efficiency and thus increases the computational costs of simulation. The methodology was tested across multiple experiments using the widely recognized European ESM, EC-Earth3. The results were compared with real operational configurations, such as those used for the Coupled Model Intercomparison Project Phase 6 (CMIP6) and European Climate Prediction project (EUCP), and validated on different HPC platforms. All of them suggest that the current approaches lead to performance loss, and that auto-lb can achieve better results in both execution speed and reduction of the core hours needed. When comparing to the EC-Earth standard-resolution CPMIP6 runs, we achieved a configuration 4.7 % faster while also reducing the core hours required by 1.3 %. Likewise, when compared to the EC-Earth high-resolution EUCP runs, the method presented showed an improvement of 34 % in the speed, with a 6.7 % reduction in the core hours consumed., This research was supported by the European High Performance Computing Joint Undertaking (EuroHPC JU) and the European Union (EU) through the ESiWACE3 project under grant agreement no. 101093054, as well as the ISENES3 project under grant agreement no. H2020-GA-824084. Additional funding was provided by the National Research Agency through the OEMES project (grant no. PID2020-116324RA-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaluation of native Earth system model output with ESMValTool v2.6.0

  • Schlund, Manuel
  • Hassler, Birgit
  • Lauer, Axel
  • Andela, Bouwe
  • Jöckel, Patrick
  • Loosveldt Tomas, Saskia
  • Vegas Regidor, Javier
Earth system models (ESMs) are state-of-the-art climate models that allow numerical simulations of the past, present-day, and future climate. To extend our understanding of the Earth system and improve climate change projections, the complexity of ESMs heavily increased over the last decades. As a consequence, the amount and volume of data provided by ESMs has increased considerably. Innovative tools for a comprehensive model evaluation and analysis are required to assess the performance of these increasingly complex ESMs against observations or reanalyses. One of these tools is the Earth System Model Evaluation Tool (ESMValTool), a community diagnostic and performance metrics tool for the evaluation of ESMs. Input data for ESMValTool needs to be formatted according to the CMOR (Climate Model Output Rewriter) standard, a process that is usually referred to as “CMORization”. While this is a quasi-standard for large model intercomparison projects like the Coupled Model Intercomparison Project (CMIP), this complicates the application of ESMValTool to non-CMOR-compliant climate model output. In this paper, we describe an extension of ESMValTool introduced in v2.6.0 that allows seamless reading and processing of “native” climate model output, i.e., operational output produced by running the climate model through the standard workflow of the corresponding modeling institute. This is achieved by an extension of ESMValTool's preprocessing pipeline that performs a CMOR-like reformatting of the native model output during runtime. Thus, the rich collection of diagnostics provided by ESMValTool is now fully available for these models. For models that use unstructured grids, a further preprocessing step required to apply many common diagnostics is regridding to a regular latitude–longitude grid. Extensions to ESMValTool's regridding functions described here allow for more flexible interpolation schemes that can be used on unstructured grids. Currently, ESMValTool supports nearest-neighbor, bilinear, and first-order conservative regridding from unstructured grids to regular grids. Example applications of this new native model support are the evaluation of new model setups against predecessor versions, assessing of the performance of different simulations against observations, CMORization of native model data for contributions to model intercomparison projects, and monitoring of running climate model simulations. For the latter, new general-purpose diagnostics have been added to ESMValTool that are able to plot a wide range of variable types. Currently, five climate models are supported: CESM2 (experimental; at the moment, only surface variables are available), EC-Earth3, EMAC, ICON, and IPSL-CM6. As the framework for the CMOR-like reformatting of native model output described here is implemented in a general way, support for other climate models can be easily added., The development of ESMValTool is supported by the projects “Climate-Carbon Interactions in the Current Century” (4C; grant agreement no. 821003), “Earth System Models for the Future” (ESM2025; grant agreement no. 101003536), “Infrastructure for the European Network for Earth System Modelling - Phase 3” (IS-ENES3; grant agreement no. 824084), and the European Research Council (ERC) Synergy Grant “Understanding and Modelling the Earth System with Machine Learning” (USMILE; grant agreement no. 855187) under the European Union's Horizon 2020 Research and Innovation Programme. This study is a contribution to the project S1 of the Collaborative Research Centre TRR 181 “Energy Transfers in Atmosphere and Ocean” funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (project no. 274762653). Brian Medeiros acknowledges support by the U.S. Department of Energy (award no. DE-SC0022070), the National Science Foundation (NSF) (IA 1947282), the National Center for Atmospheric Research, which is a major facility sponsored by the NSF (cooperative agreement no. 1852977), and the National Oceanic and Atmospheric Administration (award no. NA20OAR4310392). Tobias Stacke acknowledges funding support from the European Research Council (ERC) under the European Union's Horizon 2020 Programme (grant agreement no. 951288). This work used resources of the Deutsches Klimarechenzentrum (DKRZ) granted by its Scientific Steering Committee (WLA) under the project IDs bd0854, bd1179, and id0853. We acknowledge the World Climate Research Programme (WCRP), which, through its Working Group on Coupled Modeling, coordinated and promoted CMIP6. We thank the climate modeling groups for producing and making their model output available, the Earth System Grid Federation (ESGF) for archiving the data and providing access, and the multiple funding agencies who support CMIP and ESGF. We would like to thank Mattia Righi (DLR) for providing helpful comments about the manuscript., Peer Reviewed, "Article signat per 15 autors/es:Manuel Schlund, Birgit Hassler, Axel Lauer, Bouwe Andela, Patrick Jöckel, Rémi Kazeroni, Saskia Loosveldt Tomas, Brian Medeiros, Valeriu Predoi, Stéphane Sénési, Jérôme Servonnat, Tobias Stacke, Javier Vegas-Regidor, Klaus Zimmermann, and Veronika Eyring"
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Coupled climate response to Atlantic Multidecadal Variability in a multi-model multi-resolution ensemble

  • Hodson, Daniel L. R.
  • Bretonnière, Pierre-Antoine|||0000-0002-3066-6685
  • Cassou, Christophe
  • Davini, Paolo
  • Klingaman, Nicholas P.
  • Ruprich-Robert, Yohan|||0000-0002-4008-2026
North Atlantic sea surface temperatures (SSTs) underwent pronounced multidecadal variability during the twentieth and early twenty-first century. We examine the impacts of this Atlantic Multidecadal Variability (AMV), also referred to as the Atlantic Multidecadal Oscillation (AMO), on climate in an ensemble of five coupled climate models at both low and high spatial resolution. We use a SST nudging scheme specified by the Coupled Model Intercomparision Project’s Decadal Climate Prediction Project Component C (CMIP6 DCPP-C) to impose a persistent positive/negative phase of the AMV in the North Atlantic in coupled model simulations; SSTs are free to evolve outside this region. The large-scale seasonal mean response to the positive AMV involves widespread warming over Eurasia and the Americas, with a pattern of cooling over the Pacific Ocean similar to the Pacific Decadal Oscillation (PDO), together with a northward displacement of the inter-tropical convergence zone (ITCZ). The accompanying changes in global atmospheric circulation lead to widespread changes in precipitation. We use Analysis of Variance (ANOVA) to demonstrate that this large-scale climate response is accompanied by significant differences between models in how they respond to the common AMV forcing, particularly in the tropics. These differences may arise from variations in North Atlantic air-sea heat fluxes between models despite a common North Atlantic SST forcing pattern. We cannot detect a widespread effect of increased model horizontal resolution in this climate response, with the exception of the ITCZ, which shifts further northwards in the positive phase of the AMV in the higher resolution configurations., The Authors would like to acknowledge the use of the UKRI funded JASMIN data analysis facility which was essential to the analysis and storage of PRIMAVERA project data. Ongoing curation of project data has been supported by the IS-ENES3 project that has received funding from the European Union’ Horizon 2020 research and innovation programme under Grant Agreement No. 824084. Authors DH, PM, JS, PD, YRR, CDR acknowledge funding from the PRIMAVERA project (www.primavera-h2020.eu), funded by the European Union’s Horizon 2020 programme under Grant Agreement 641727. PM was supported by U.K.–China Research and Innovation Partnership Fund through the Met Office Climate Science for Service Partnership (CSSP) China as part of the Newton Fund. PD thanks ECMWF for providing computing time in the framework of the special projects SPITDAVI. YRR was funded by the European Union’s Horizon 2020 Research and Inovation Programme in the framework of the Marie Skłodowska-Curie grant INADEC (Grant Agreement 80015400). Author DH would like to thank Nick Klingaman and Linda Hirons for their extensive help with the MetUM-GOML model. This article was written with support (DH) from National Environmental Research Council (NERC) national capability grant for the North Atlantic Climate System: Integrated study (ACSIS) program (Grants NE/N018001/1, NE/N018044/1, NE/N018028/1, and NE/N018052/1). MMR is supported by a Juan de la Cierva Incorporacion research contract of MICINN (Spain). The authors wish to acknowledge use of the Ferret program for analysis and graphics in this paper. Ferret is a product of NOAA’s Pacific Marine Environmental Laboratory. (Information is available at http://ferret.pmel.noaa.gov/Ferret/) and also the CF-python analysis package http://ncas-cms.github.io/cf-python/. Assembly of MetUM-GOML and development of MC-KPP was supported by the National Centre for Atmospheric Science and led by Dr. Nicholas Klingaman. The authors would also like to thank the three anonymous reviewers whose comments contributed to a much improved final manuscript., Peer Reviewed, "Article signat per 17 autors/es: Daniel L. R. Hodson, Pierre-Antoine Bretonnière, Christophe Cassou, Paolo Davini, Nicholas P. Klingaman, Katja Lohmann, Jorge Lopez-Parages, Marta Martín-Rey, Marie-Pierre Moine, Paul-Arthur Monerie, Dian A. Putrasahan, Christopher D. Roberts, Jon Robson, Yohan Ruprich-Robert, Emilia Sanchez-Gomez, Jon Seddon & Retish Senan"
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Earth System Model Evaluation Tool (ESMValTool) v2.0 – an extended set of large-scale diagnostics for quasi-operational and comprehensive evaluation of Earth system models in CMIP

  • Eyring, Veronika
  • Bock, Lisa
  • Lauer, Axel
  • Righi, Mattia
  • Schlund, Manuel
  • Andela, Bouwe
  • Arnone, Enrico
  • Bellprat, Omar
  • Brötz, Björn
  • Caron, Louis-Philippe
  • Carvalhais, Nuno
  • Cionni, Irene
  • Cortesi, Nicola
  • Crezee, Bas
  • Davin, Edouard L.
  • Davini, Paolo
  • Debeire, Kevin
  • Mora, Lee, de
  • Deser, Clara
  • Docquier, David
  • Earnshaw, Paul
  • Ehbrecht, Carsten
  • Gier, Bettina K.
  • Gonzalez-Reviriego, Nube
  • Goodman, Paul
  • Hagemann, Stefan
  • Hardiman, Steven
  • Hassler, Birgit
  • Hunter, Alasdair
  • Kadow, Christopher
  • Kindermann, Stephan
  • Koirala, Sujan
  • Koldunov, Nikolay
  • Lejeune, Quentin
  • Lembo, Valerio
  • Lovato, Tomas
  • Lucarini, Valerio
  • Massonnet, François
  • Müller, Benjamin
  • Pandde, Amarjiit
  • Pérez-Zanón, Núria
  • Phillips, Adam
  • Predoi, Valeriu
  • Russell, Joellen
  • Sellar, Alistair
  • Serva, Federico
  • Stacke, Tobias
  • Swaminathan, Ranjini
  • Torralba, Verónica
  • Vegas-Regidor, Javier
  • Hardenberg, Jost, von
  • Weigel, Katja
  • Zimmermann, Klaus
The Earth System Model Evaluation Tool (ESMValTool) is a community diagnostics and performance metrics tool designed to improve comprehensive and routine evaluation of Earth system models (ESMs) participating in the Coupled Model Intercomparison Project (CMIP). It has undergone rapid development since the first release in 2016 and is now a well-tested tool that provides end-to-end provenance tracking to ensure reproducibility. It consists of (1) an easy-to-install, well-documented Python package providing the core functionalities (ESMValCore) that performs common preprocessing operations and (2) a diagnostic part that includes tailored diagnostics and performance metrics for specific scientific applications. Here we describe large-scale diagnostics of the second major release of the tool that supports the evaluation of ESMs participating in CMIP Phase 6 (CMIP6). ESMValTool v2.0 includes a large collection of diagnostics and performance metrics for atmospheric, oceanic, and terrestrial variables for the mean state, trends, and variability. ESMValTool v2.0 also successfully reproduces figures from the evaluation and projections chapters of the Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment Report (AR5) and incorporates updates from targeted analysis packages, such as the NCAR Climate Variability Diagnostics Package for the evaluation of modes of variability, the Thermodynamic Diagnostic Tool (TheDiaTo) to evaluate the energetics of the climate system, as well as parts of AutoAssess that contains a mix of top–down performance metrics. The tool has been fully integrated into the Earth System Grid Federation (ESGF) infrastructure at the Deutsches Klimarechenzentrum (DKRZ) to provide evaluation results from CMIP6 model simulations shortly after the output is published to the CMIP archive. A result browser has been implemented that enables advanced monitoring of the evaluation results by a broad user community at much faster timescales than what was possible in CMIP5., This research has been supported by Horizon 2020 (grant nos. 641816, 727862, 641727, and 824084), the Copernicus Climate Change Service (C3S) (Metrics and Access to Global Indices for Climate Projections, MAGIC), the Helmholtz Association (Advanced Earth System Model Evaluation for CMIP, EVal4CMIP), the Deutsche Forschungsgemeinschaft (grant no. 274762653), the Federal Ministry of Education and Research (BMBF) (grant no. CMIP6-DICAD), and the European Space Agency (ESA Climate Change Initiative Climate Model User Group, ESA CCI CMUG)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Earth System Model Evaluation Tool (ESMValTool) v2.0 – diagnostics for extreme events, regional and impact evaluation, and analysis of Earth system models in CMIP

  • Weigel, Katja
  • Bock, Lisa
  • Gier, Bettina K.
  • Lauer, Axel
  • Lauer, Axel
  • Caron, Louis-Philippe
  • Hunter, Alasdair
  • Lledó, Llorenç
  • Pérez-Zanón, Núria
  • Vegas-Regidor, Javier
This paper complements a series of now four publications that document the release of the Earth System Model Evaluation Tool (ESMValTool) v2.0. It describes new diagnostics on the hydrological cycle, extreme events, impact assessment, regional evaluations, and ensemble member selection. The diagnostics are developed by a large community of scientists aiming to facilitate the evaluation and comparison of Earth system models (ESMs) which are participating in the Coupled Model Intercomparison Project (CMIP). The second release of this tool aims to support the evaluation of ESMs participating in CMIP Phase 6 (CMIP6). Furthermore, datasets from other models and observations can be analysed. The diagnostics for the hydrological cycle include several precipitation and drought indices, as well as hydroclimatic intensity and indices from the Expert Team on Climate Change Detection and Indices (ETCCDI). The latter are also used for identification of extreme events, for impact assessment, and to project and characterize the risks and impacts of climate change for natural and socio-economic systems. Further impact assessment diagnostics are included to compute daily temperature ranges and capacity factors for wind and solar energy generation. Regional scales can be analysed with new diagnostics implemented for selected regions and stochastic downscaling. ESMValTool v2.0 also includes diagnostics to analyse large multi-model ensembles including grouping and selecting ensemble members by user-specified criteria. Here, we present examples for their capabilities based on the well-established CMIP Phase 5 (CMIP5) dataset., This research has been supported by the Copernicus Climate Change Service (C3S) (Metrics and Access to Global Indices for Climate Projections (C3S-MAGIC), C3S_34a Lot 2), the Helmholtz-Gemeinschaft (Advanced Earth System Model Evaluation for CMIP (grant no. EVal4CMIP)), the Horizon 2020 Framework Programme, H2020 Societal Challenges (CRESCENDO (grant no. 641816)), the Federal Ministry of Education and Research (BMBF) (grant no. CMIP6-DICAD), and the Horizon 2020 Framework Programme, H2020 Excellent Science (IS-ENES3 (grant no. 824084)). The article processing charges for this open-access publication were covered by the University of Bremen., Peer Reviewed, "Article signat per 26 autors/es: Katja Weigel, Lisa Bock, Bettina K. Gier, Axel Lauer, Mattia Righi, Manuel Schlund, Kemisola Adeniyi, Bouwe Andela, Enrico Arnone, Peter Berg, Louis-Philippe Caron, Irene Cionni, Susanna Corti, Niels Drost, Alasdair Hunter, Llorenç Lledó, Christian Wilhelm Mohr, Aytaç Paçal, Núria Pérez-Zanón, Valeriu Predoi, Marit Sandstad, Jana Sillmann, Andreas Sterl, Javier Vegas-Regidor, Jost von Hardenberg, and Veronika Eyrin ", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Reducing time and computing costs in EC-Earth: an automatic load-balancing approach for coupled Earth system models

  • Palomas Martínez, Sergi
  • Acosta Cobos, Mario César
  • Utrera Iglesias, Gladys Miriam
  • Tourigny, Etienne
Earth system models (ESMs) are intricate models employed for simulating the Earth's climate, typically constructed from distinct independent components dedicated to simulate specific natural phenomena (such as atmosphere and ocean dynamics, atmospheric chemistry, land and ocean biosphere). In order to capture the interactions between these processes, ESMs utilize coupling libraries, which oversee the synchronization and field exchanges among independent developed codes typically operating in parallel as a multi-program, multiple data (MPMD) application. The performance achieved depends on the coupling approach, as well as on the number of parallel resources and scalability properties of each component. Determining the appropriate number of resources to use for each component in coupled ESMs is crucial for efficient utilization of the high-performance computing (HPC) infrastructures used in climate modeling. However, this task traditionally involves manual testing of multiple process allocations by trial and error, requiring significant time investment from researchers and making the process more error-prone, often resulting in a loss of application performance due to the complexity of the task. This paper introduces the automatic load-balance tool (auto-lb), a methodology and tool for determining the resource allocation to each component within coupled ESMs, aimed at improving the application's performance. Notably, this methodology is automatic and does not require expertise in HPC to improve the performance achieved by coupled ESMs. This is accomplished by minimizing the load imbalance: reducing each constituent's execution cost (core hours), as well as minimizing the core hours wasted resulting from the synchronizations between them, without penalizing the execution speed of the entire model. This optimization is achieved regardless of the scalability properties of each constituent and the complexity of their dependencies during the coupling. To achieve this, we designed a new performance metric called “fittingness” to assess the performance of coupled execution, evaluating the trade-off between parallel efficiency and application throughput. This metric is intended for scenarios where optimality can depend on various criteria and constraints. Aiming for maximum speed might not be desirable if it leads to a decrease in parallel efficiency and thus increases the computational costs of simulation. The methodology was tested across multiple experiments using the widely recognized European ESM, EC-Earth3. The results were compared with real operational configurations, such as those used for the Coupled Model Intercomparison Project Phase 6 (CMIP6) and European Climate Prediction project (EUCP), and validated on different HPC platforms. All of them suggest that the current approaches lead to performance loss, and that auto-lb can achieve better results in both execution speed and reduction of the core hours needed. When comparing to the EC-Earth standard-resolution CPMIP6 runs, we achieved a configuration 4.7 % faster while also reducing the core hours required by 1.3 %. Likewise, when compared to the EC-Earth high-resolution EUCP runs, the method presented showed an improvement of 34 % in the speed, with a 6.7 % reduction in the core hours consumed., This research was supported by the European High Performance Computing Joint Undertaking (EuroHPC JU) and the European Union (EU) through the ESiWACE3 project under grant agreement no. 101093054, as well as the ISENES3 project under grant agreement no. H2020-GA-824084. Additional funding was provided by the National Research Agency through the OEMES project (grant no. PID2020-116324RA-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Coupled climate response to Atlantic Multidecadal Variability in a multi-model multi-resolution ensemble

  • Hodson, Daniel L. R.
  • Bretonnière, Pierre-Antoine
  • Cassou, Christophe
  • Davini, Paolo
  • Klingaman, Nicholas P.
  • Ruprich-Robert, Yohan
North Atlantic sea surface temperatures (SSTs) underwent pronounced multidecadal variability during the twentieth and early twenty-first century. We examine the impacts of this Atlantic Multidecadal Variability (AMV), also referred to as the Atlantic Multidecadal Oscillation (AMO), on climate in an ensemble of five coupled climate models at both low and high spatial resolution. We use a SST nudging scheme specified by the Coupled Model Intercomparision Project’s Decadal Climate Prediction Project Component C (CMIP6 DCPP-C) to impose a persistent positive/negative phase of the AMV in the North Atlantic in coupled model simulations; SSTs are free to evolve outside this region. The large-scale seasonal mean response to the positive AMV involves widespread warming over Eurasia and the Americas, with a pattern of cooling over the Pacific Ocean similar to the Pacific Decadal Oscillation (PDO), together with a northward displacement of the inter-tropical convergence zone (ITCZ). The accompanying changes in global atmospheric circulation lead to widespread changes in precipitation. We use Analysis of Variance (ANOVA) to demonstrate that this large-scale climate response is accompanied by significant differences between models in how they respond to the common AMV forcing, particularly in the tropics. These differences may arise from variations in North Atlantic air-sea heat fluxes between models despite a common North Atlantic SST forcing pattern. We cannot detect a widespread effect of increased model horizontal resolution in this climate response, with the exception of the ITCZ, which shifts further northwards in the positive phase of the AMV in the higher resolution configurations., The Authors would like to acknowledge the use of the UKRI funded JASMIN data analysis facility which was essential to the analysis and storage of PRIMAVERA project data. Ongoing curation of project data has been supported by the IS-ENES3 project that has received funding from the European Union’ Horizon 2020 research and innovation programme under Grant Agreement No. 824084. Authors DH, PM, JS, PD, YRR, CDR acknowledge funding from the PRIMAVERA project (www.primavera-h2020.eu), funded by the European Union’s Horizon 2020 programme under Grant Agreement 641727. PM was supported by U.K.–China Research and Innovation Partnership Fund through the Met Office Climate Science for Service Partnership (CSSP) China as part of the Newton Fund. PD thanks ECMWF for providing computing time in the framework of the special projects SPITDAVI. YRR was funded by the European Union’s Horizon 2020 Research and Inovation Programme in the framework of the Marie Skłodowska-Curie grant INADEC (Grant Agreement 80015400). Author DH would like to thank Nick Klingaman and Linda Hirons for their extensive help with the MetUM-GOML model. This article was written with support (DH) from National Environmental Research Council (NERC) national capability grant for the North Atlantic Climate System: Integrated study (ACSIS) program (Grants NE/N018001/1, NE/N018044/1, NE/N018028/1, and NE/N018052/1). MMR is supported by a Juan de la Cierva Incorporacion research contract of MICINN (Spain). The authors wish to acknowledge use of the Ferret program for analysis and graphics in this paper. Ferret is a product of NOAA’s Pacific Marine Environmental Laboratory. (Information is available at http://ferret.pmel.noaa.gov/Ferret/) and also the CF-python analysis package http://ncas-cms.github.io/cf-python/. Assembly of MetUM-GOML and development of MC-KPP was supported by the National Centre for Atmospheric Science and led by Dr. Nicholas Klingaman. The authors would also like to thank the three anonymous reviewers whose comments contributed to a much improved final manuscript., Peer Reviewed, "Article signat per 17 autors/es: Daniel L. R. Hodson, Pierre-Antoine Bretonnière, Christophe Cassou, Paolo Davini, Nicholas P. Klingaman, Katja Lohmann, Jorge Lopez-Parages, Marta Martín-Rey, Marie-Pierre Moine, Paul-Arthur Monerie, Dian A. Putrasahan, Christopher D. Roberts, Jon Robson, Yohan Ruprich-Robert, Emilia Sanchez-Gomez, Jon Seddon & Retish Senan", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The computational and energy cost of simulation and storage for climate science: lessons from CMIP6

  • Acosta Cobos, Mario César
  • Palomas Martínez, Sergi
  • Paronuzzi Ticco, Stella Valentina
  • Utrera Iglesias, Gladys Miriam
  • Biercamp, Joachim
  • Bretonnière, Pierre-Antoine
  • Budich, Reinhard
  • Castrillo Melguizo, Miguel
  • Caubel, Arnaud
  • Doblas Reyes, Francisco
The Coupled Model Intercomparison Project (CMIP) is one of the biggest international efforts aimed at better understanding the past, present, and future of climate changes in a multi-model context. A total of 21 model intercomparison projects (MIPs) were endorsed in its sixth phase (CMIP6), which included 190 different experiments that were used to simulate 40 000 years and produced around 40 PB of data in total. This paper presents the main findings obtained from the CPMIP (the Computational Performance Model Intercomparison Project), a collection of a common set of metrics, specifically designed for assessing climate model performance. These metrics were exclusively collected from the production runs of experiments used in CMIP6 and primarily from institutions within the IS-ENES3 consortium. The document presents the full set of CPMIP metrics per institution and experiment, including a detailed analysis and discussion of each of the measurements. During the analysis, we found a positive correlation between the core hours needed, the complexity of the models, and the resolution used. Likewise, we show that between 5 %–15 % of the execution cost is spent in the coupling between independent components, and it only gets worse by increasing the number of resources. From the data, it is clear that queue times have a great impact on the actual speed achieved and have a huge variability across different institutions, ranging from none to up to 78 % execution overhead. Furthermore, our evaluation shows that the estimated carbon footprint of running such big simulations within the IS-ENES3 consortium is 1692 t of CO2 equivalent. As a result of the collection, we contribute to the creation of a comprehensive database for future community reference, establishing a benchmark for evaluation and facilitating the multi-model, multi-platform comparisons crucial for understanding climate modelling performance. Given the diverse range of applications, configurations, and hardware utilised, further work is required for the standardisation and formulation of general rules. The paper concludes with recommendations for future exercises aimed at addressing the encountered challenges which will facilitate more collections of a similar nature., This research has been supported by the Barcelona Supercomputing Center (grant nos. PID2020116324RA-I00 (OEMES) and H2020-GA-824084 (ISENES))., Peer Reviewed, Article signat per 22 autors/es: Mario C. Acosta 1, Sergi Palomas 1, Stella V. Paronuzzi Ticco 1, Gladys Utrera 1, Joachim Biercamp 2, Pierre-Antoine Bretonniere 1, Reinhard Budich 3, Miguel Castrillo 1, Arnaud Caubel 4, Francisco Doblas-Reyes 1,14, Italo Epicoco 5, Uwe Fladrich 6, Sylvie Joussaume 4, Alok Kumar Gupta 7, Bryan Lawrence 8, Philippe Le Sager 9, Grenville Lister 8, Marie-Pierre Moine 10, Jean-Christophe Rioual 11, Sophie Valcke 10, Niki Zadeh 12, and Venkatramani Balaji 13 / 1- Barcelona Supercomputing Center, Plaça d’Eusebi Güell, 1–3, 08034 Barcelona, Spain; 2- German Climate Computing Centre, Bundesstraße 45a, 20146 Hamburg, Germany; 3- Max Planck Institute, Hofgartenstr. 8, 80539 Munich, Germany; 4- Institut Pierre-Simon Laplace, 11 Bd d’Alembert, 78280 Guyancourt, France; 5- Euro-Mediterranean Center on Climate Change, Via della Libertà, 12, 30121 Venice, Italy; 6- Swedish Meteorological and Hydrological Institute, 601 76 Norrköping, Sweden; 7- Norwegian Research Centre, Nygårdsgaten 112, 5008 Bergen, Norway; 8- National Centre for Atmospheric Science, Fairbairn House, 71–75 Clarendon Rd, Woodhouse, Leeds LS2 9PH, United Kingdom; 9- Royal Netherlands Meteorological Institute, Utrechtseweg 297, 3731 GA De Bilt, the Netherlands; 10- European Center for Advanced Research and Training in Scientific Computing, 42 Av. Gaspard Coriolis, 31100 Toulouse, France; 11- Meteorological Office, Fitzroy Road, Exeter, Devon, EX1 3PB, United Kingdom; 12- National Oceanic and Atmospheric Administration, 1401 Constitution Avenue NW, Room 5128, Washington, DC 20230, USA; 13- High Meadows Environmental Institute, Princeton University, Guyot Hall, Room 129, Princeton, NJ 08544-1003, USA; 14- Catalan Institution for Research and Advanced Studies, Passeig Lluís Companys 23, 08010 Barcelona, Spain, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluation of native Earth system model output with ESMValTool v2.6.0

  • Schlund, Manuel
  • Hassler, Birgit
  • Lauer, Axel
  • Andela, Bouwe
  • Jöckel, Patrick
  • Loosveldt Tomas, Saskia
  • Vegas Regidor, Javier
Earth system models (ESMs) are state-of-the-art climate models that allow numerical simulations of the past, present-day, and future climate. To extend our understanding of the Earth system and improve climate change projections, the complexity of ESMs heavily increased over the last decades. As a consequence, the amount and volume of data provided by ESMs has increased considerably. Innovative tools for a comprehensive model evaluation and analysis are required to assess the performance of these increasingly complex ESMs against observations or reanalyses. One of these tools is the Earth System Model Evaluation Tool (ESMValTool), a community diagnostic and performance metrics tool for the evaluation of ESMs. Input data for ESMValTool needs to be formatted according to the CMOR (Climate Model Output Rewriter) standard, a process that is usually referred to as “CMORization”. While this is a quasi-standard for large model intercomparison projects like the Coupled Model Intercomparison Project (CMIP), this complicates the application of ESMValTool to non-CMOR-compliant climate model output. In this paper, we describe an extension of ESMValTool introduced in v2.6.0 that allows seamless reading and processing of “native” climate model output, i.e., operational output produced by running the climate model through the standard workflow of the corresponding modeling institute. This is achieved by an extension of ESMValTool's preprocessing pipeline that performs a CMOR-like reformatting of the native model output during runtime. Thus, the rich collection of diagnostics provided by ESMValTool is now fully available for these models. For models that use unstructured grids, a further preprocessing step required to apply many common diagnostics is regridding to a regular latitude–longitude grid. Extensions to ESMValTool's regridding functions described here allow for more flexible interpolation schemes that can be used on unstructured grids. Currently, ESMValTool supports nearest-neighbor, bilinear, and first-order conservative regridding from unstructured grids to regular grids. Example applications of this new native model support are the evaluation of new model setups against predecessor versions, assessing of the performance of different simulations against observations, CMORization of native model data for contributions to model intercomparison projects, and monitoring of running climate model simulations. For the latter, new general-purpose diagnostics have been added to ESMValTool that are able to plot a wide range of variable types. Currently, five climate models are supported: CESM2 (experimental; at the moment, only surface variables are available), EC-Earth3, EMAC, ICON, and IPSL-CM6. As the framework for the CMOR-like reformatting of native model output described here is implemented in a general way, support for other climate models can be easily added., The development of ESMValTool is supported by the projects “Climate-Carbon Interactions in the Current Century” (4C; grant agreement no. 821003), “Earth System Models for the Future” (ESM2025; grant agreement no. 101003536), “Infrastructure for the European Network for Earth System Modelling - Phase 3” (IS-ENES3; grant agreement no. 824084), and the European Research Council (ERC) Synergy Grant “Understanding and Modelling the Earth System with Machine Learning” (USMILE; grant agreement no. 855187) under the European Union's Horizon 2020 Research and Innovation Programme. This study is a contribution to the project S1 of the Collaborative Research Centre TRR 181 “Energy Transfers in Atmosphere and Ocean” funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (project no. 274762653). Brian Medeiros acknowledges support by the U.S. Department of Energy (award no. DE-SC0022070), the National Science Foundation (NSF) (IA 1947282), the National Center for Atmospheric Research, which is a major facility sponsored by the NSF (cooperative agreement no. 1852977), and the National Oceanic and Atmospheric Administration (award no. NA20OAR4310392). Tobias Stacke acknowledges funding support from the European Research Council (ERC) under the European Union's Horizon 2020 Programme (grant agreement no. 951288). This work used resources of the Deutsches Klimarechenzentrum (DKRZ) granted by its Scientific Steering Committee (WLA) under the project IDs bd0854, bd1179, and id0853. We acknowledge the World Climate Research Programme (WCRP), which, through its Working Group on Coupled Modeling, coordinated and promoted CMIP6. We thank the climate modeling groups for producing and making their model output available, the Earth System Grid Federation (ESGF) for archiving the data and providing access, and the multiple funding agencies who support CMIP and ESGF. We would like to thank Mattia Righi (DLR) for providing helpful comments about the manuscript., Peer Reviewed, "Article signat per 15 autors/es:Manuel Schlund, Birgit Hassler, Axel Lauer, Bouwe Andela, Patrick Jöckel, Rémi Kazeroni, Saskia Loosveldt Tomas, Brian Medeiros, Valeriu Predoi, Stéphane Sénési, Jérôme Servonnat, Tobias Stacke, Javier Vegas-Regidor, Klaus Zimmermann, and Veronika Eyring", Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Coordinating an operational data distribution network for CMIP6 data

  • Petrie, Ruth
  • Denvil, Sébastien
  • Ames, Sasha
  • Levavasseur, Guillaume
  • Bretonnière, Pierre-Antoine
  • Serradell Maronda, Kim
The distribution of data contributed to the Coupled Model Intercomparison Project Phase 6 (CMIP6) is via the Earth System Grid Federation (ESGF). The ESGF is a network of internationally distributed sites that together work as a federated data archive. Data records from climate modelling institutes are published to the ESGF and then shared around the world. It is anticipated that CMIP6 will produce approximately 20 PB of data to be published and distributed via the ESGF. In addition to this large volume of data a number of value-added CMIP6 services are required to interact with the ESGF; for example the citation and errata services both interact with the ESGF but are not a core part of its infrastructure. With a number of interacting services and a large volume of data anticipated for CMIP6, the CMIP Data Node Operations Team (CDNOT) was formed. The CDNOT coordinated and implemented a series of CMIP6 preparation data challenges to test all the interacting components in the ESGF CMIP6 software ecosystem. This ensured that when CMIP6 data were released they could be reliably distributed., This international collaborative work was funded through various agencies. Co-authors at Lawrence Berkeley National Laboratory were funded under contract no. DE-AC02-05CH11231, and co-authors at Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344 with the US Department of Energy. European co-authors were supported by the European Union Horizon 2020 IS-ENES3 project (grant agreement no. 824084). CNRM participants were additionally funded by the French National Research Agency project CONVERGENCE (grant ANR-13-MONU-0008-02). Co-authors from NCI were supported by the National Collaborative Research Infrastructure Strategy (NCRIS)-funded National Computational Infrastructure (NCI) Australia and the Australian Research Data Commons (ARDC)., Peer Reviewed, "Article signat per 38 autors: Ruth Petrie, Sébastien Denvil, Sasha Ames, Guillaume Levavasseur, Sandro Fiore, Chris Allen, Fabrizio Antonio, Katharina Berger, Pierre-Antoine Bretonnière, Luca Cinquini, Eli Dart, Prashanth Dwarakanath, Kelsey Druken, Ben Evans, Laurent Franchistéguy, Sébastien Gardoll, Eric Gerbier, Mark Greenslade, David Hassell, Alan Iwi, Martin Juckes, Stephan Kindermann, Lukasz Lacinski, Maria Mirto, Atef Ben Nasser, Paola Nassisi, Eric Nienhouse, Sergey Nikonov, Alessandra Nuzzo, Clare Richards, Syazwan Ridzwan, Michel Rixen, Kim Serradell, Kate Snow, Ag Stephens, Martina Stockhause, Hans Vahlenkamp, and Rick Wagner", Postprint (published version)
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

The IPCC Interactive Atlas DataLab: online reusability for regional climate change assessment

  • Cimadevilla Álvarez, Ezequiel|||0000-0002-8437-2068
  • Iturbide Martínez de Albéniz, Maialen|||0000-0002-5048-0941
  • Cofiño González, Antonio Santiago|||0000-0001-7719-979X
  • Fernández Fernández, Jesús (matemático)|||0000-0002-3483-0008
  • Sitz, Lina Elisabet
  • Palacio Hoz, Aida
  • Heredia Canales, Pedro Andrés
  • Gutiérrez Llorente, José Manuel
The Sixth Assessment Report (AR6) of the IPCC highlights the regionally varying impacts of climate change on both mean and extreme conditions, with significant socio-economic impacts. A key innovation of AR6 is the Interactive Atlas, which provides spatial and temporal analysis of over 20 Climatic Impact-Drivers (CIDs), integrating global and regional projection datasets from the CMIP and CORDEX model intercomparison projects. The Interactive Atlas allows users to explore, compare and download products relevant to regional climate change risk assessment, while adhering to FAIR principles to ensure data accessibility and reusability. This paper describes additional work undertaken to further support these principles, acknowledging the challenges of processing large-scale datasets. We present a cloud-enabled data laboratory-DataLab- developed using R and Python frameworks for advanced analysis and visualization. The DataLab seamlessly integrates the gridded dataset underpinning the Interactive Atlas with computational resources, combining traditional remote data access services and modern cloudbased solutions to balance cost-effectiveness with technological advances. This comprehensive resource supports regional climate change assessment and could be used to inform national adaptation plans and strengthen climate change research and policy development., Ph.D. grant PRE2021-097646 funded by MICIU/AEI/10.13039/501100011033 and by ESF+ (to E.C.). IMPETUS4CHANGE, grant agreement no. 101081555, from the European Union’s Horizon Europe research and innovation programme (to J.F.). IS-ENES3, grant agreement no. 824084, from the European Union’s Horizon 2020 research and innovation programme (to A.C.). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Implementation of FAIR principles in the IPCC: the WGI AR6 Atlas repository

  • Iturbide Martínez de Albéniz, Maialen|||0000-0002-5048-0941
  • Fernández Fernández, Jesús (matemático)|||0000-0002-3483-0008
  • Gutiérrez Llorente, José Manuel
  • Pirani, Anna
  • Huard, David
  • Al Khourdajie, Alaa
  • Baño Medina, Jorge|||0000-0003-3380-1579
  • Bedía Jiménez, Joaquín
  • Casanueva Vicente, Ana|||0000-0002-7568-0229
  • Cimadevilla Álvarez, Ezequiel|||0000-0002-8437-2068
  • Cofiño González, Antonio Santiago|||0000-0001-7719-979X
  • De Felice, Mateo
  • Díez Sierra, Javier|||0000-0001-9053-2542
  • García Díez, Markel
  • Goldie, James
  • Herrera, Dimitris A.
  • Herrera García, Sixto|||0000-0002-5384-179X
  • Manzanas, Rodrigo|||0000-0002-0001-3448
  • Milovac, Josipa|||0000-0001-5648-5279
  • Radhakrishnan, Aparna
The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. We present the Atlas chapter of Working Group I (WGI) as a test case. We describe the application of the FAIR principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We introduce the open source repository resulting from this process, including coding (e.g., annotated Jupyter notebooks), data provenance, and some aggregated datasets used in some figures in the Atlas chapter and its interactive companion (the Interactive Atlas), open to scrutiny by the scientific community and the general public. We describe the informal pilot review conducted on this repository to gather recommendations that led to significant improvements. Finally, a working example illustrates the re-use of the repository resources to produce customized regional information, extending the Interactive Atlas products and running the code interactively in a web browser using Jupyter notebooks., We acknowledge partial funding from projects ATLAS (PID2019-111481RB-I00) funded by MCIN/AEI/10.13039/501100011033 and IS-ENES3 which is funded by the European Union’s H2020 programme under grant agreement No 824084. We also acknowledge the World Climate Research Programme’s Working Group on Coupled Modelling and Working Group on Regional Climate, responsible for CMIP and CORDEX, respectively. We also thank the climate modeling groups for producing and making available their model output, as described in the data-source folder of the repository. We also acknowledge the Earth System Grid Federation infrastructure, an international effort led by the U.S. Department of Energy’s Program for Climate Model Diagnosis and Intercomparison, the European Network for Earth System Modelling and other partners in the Global Organisation for Earth System Science Portals (GO-ESSP). The opinions expressed are those of the author(s) only and should not be considered as representative of the European Commission’s official position. JF and ASC acknowledge support from the CORDyS project (PID2020-116595RB-I00) funded by MCIN/AEI/10.13039/501100011033. JM acknowledges support from MDM-2017-0765 funded by MCIN/AEI/10.13039/501100011033. JBM acknowledges support from Universidad de Cantabria and Consejería de Universidades, Igualdad, Cultura y Deporte del Gobierno de Cantabria via the project “instrumentación y ciencia de datos para sondear la naturaleza del universo”. Finally we want to thank the reviewers participating in the Atlas FAIR review described in the paper and the editor and the two anonymous referees for their work and constructive comments, helping us to improve the manuscript.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

The METACLIP semantic provenance framework for climate products

  • Bedía Jiménez, Joaquín
  • San Martín Segura, Daniel
  • Iturbide Martínez de Albéniz, Maialen|||0000-0002-5048-0941
  • Herrera García, Sixto|||0000-0002-5384-179X
  • Manzanas, Rodrigo|||0000-0002-0001-3448
  • Gutiérrez Llorente, José Manuel
Having an effective way of dealing with data provenance is a necessary condition to ensure reproducibility, helping to build trust and credibility in research outcomes and the data products delivered. METACLIP (METAdata for CLImate Products) is a language-independent framework envisaged to tackle the problem of climate product provenance description. The solution is based on semantics exploiting the web standard Resource Description Framework (RDF), building on domain-specific extensions of standard vocabularies (e.g., PROV-O) describing the different aspects involved in climate product generation. We illustrate METACLIP through an example application within the open source R computing environment, generating a climate product for which full provenance information is recorded. Finally, the METACLIP Interpreter, a web-based interactive front-end for metadata visualization is presented, helping a diversity of users with different levels of expertise to trace and understand the provenance of a wide variety of climate data products, and to fully reproduce them., We are grateful to the three anonymous reviewers and to the Editor for their insightful comments, helping to improve the original manuscript. Our colleague Prof. Antonio Cofiño (University of Cantabria) has helped with valuable comments to the development of the METACLIP framework. Dr. Jonas Bhend (MeteoSwiss) has contributed to the design of the vocabulary for seasonal forecast verification. This work has been partially funded by the European Union’s Earth Observation Programme COPERNICUS, through the ITT C3S-51-Lot3 (QA4Seas Project, “Quality Assurance for Seasonal Forecast Products”), the Spain's Research and Innovation Programme under project INSIGNIA (co-funded by MINECO and FEDER, grant no. CGL2016-79210-R) and the European Union Research and Innovation Programme under projects IS-ENES2 (FP7 grant agreement no. 312979) and IS-ENES3 (H2020 grant agreement no. 824084)
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Evaluation of bias correction methods for a multivariate drought index: case study of the Upper Jhelum Basin

  • Ansari, Rubina
  • Casanueva Vicente, Ana|||0000-0002-7568-0229
  • Liaqat, Muhammad Usman
  • Grossi, Giovanna
Bias correction (BC) is often a necessity to improve the applicability of global and regional climate model (GCM and RCM, respectively) outputs to impact assessment studies, which usually depend on multiple potentially dependent variables. To date, various BC methods have been developed which adjust climate variables separately (univariate BC) or jointly (multivariate BC) prior to their application in impact studies (i.e., the component-wise approach). Another possible approach is to first calculate the multivariate hazard index from the original, biased simulations and bias-correct the impact model output or index itself using univariate methods (direct approach). This has the advantage of circumventing the difficulties associated with correcting the inter-variable dependence of climate variables which is not considered by univariate BC methods. Using a multivariate drought index (i.e., standardized precipitation evapotranspiration index´ SPEI) as an example, the present study compares different state-of-the-art BC methods (univariate and multivariate) and BC approaches (direct and component-wise) applied to climate model simulations stemming from different experiments at different spatial resolutions (namely Coordinated Regional Climate Downscaling Experiment (CORDEX), CORDEX Coordinated Output for Regional Evaluations (CORDEX-CORE), and 6th Coupled Intercomparison Project (CMIP6)). The BC methods are calibrated and evaluated over the same historical period (1986-2005). The proposed framework is demonstrated as a case study over a transboundary watershed, i.e., the Upper Jhelum Basin (UJB) in the Western Himalayas. Results show that (1) there is some added value of multivariate BC methods over the univariate methods in adjusting the inter-variable relationship; however, comparable performance is found for SPEI indices. (2) The best-performing BC methods exhibit a comparable performance under both approaches with a slightly better performance for the direct approach. (3) The added value of the high-resolution experiments (CORDEX-CORE) compared to their coarser-resolution counterparts (CORDEX) is not apparent in this study., This research has been supported by the cooperation agreement PFK PhD program 2019–2022 “Partnership for Knowledge-Platform 2: Health and WASH (WAter Sanitation and good Hygiene)” of the AICS-Italian Agency for Development Cooperation, the Erasmus Traineeship Program, Project COMPOUND (TED2021-131334A-I00) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and the Horizon 2020 project IS-ENES3 (grant agreement no. 824084).
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

A Posteriori Random Forests for Stochastic Downscaling of Precipitation by Predicting Probability Distributions

  • Legasa Ríos, Mikel Néstor|||0000-0003-0470-8068
  • Manzanas, Rodrigo|||0000-0002-0001-3448
  • Calviño Martínez, Aida|||0000-0002-9224-9406
  • Gutiérrez Llorente, José Manuel
ABSTRACT: This work presents a comprehensive assessment of the suitability of random forests, a well-known machine learning technique, for the statistical downscaling of precipitation. Building on the experimental and validation framework proposed in the Experiment 1 of the COST action VALUE-the largest, most exhaustive intercomparison study of statistical downscaling methods to date-we introduce and thoroughly analyze a posteriori random forests (AP-RFs), which use all the information contained in the leaves to reliably predict the shape and scale parameters of the gamma probability distribution of precipitation on wet days. Therefore, as opposed to traditional random forests, which typically provide deterministic predictions, our AP-RFs allow realistic stochastic precipitation samples to be generated for wet days. Indeed, as compared to one particular implementation of a generalized linear model that exhibited an overall good performance in VALUE, our AP-RFs yield better distributional similarity with observations without loss of predictive power. Noteworthy, the new methodology proposed in this paper has substantial potential for hydrologists and other impact communities which are in need of local-scale, reliable stochastic climate information., The authors would like to acknowledge the projects MULTI-SDM (CGL2015-66583-R, MINECO/FEDER); IS-ENES3, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement ID 824084 (https://is.enes.org) and Contribución a la nueva generación de proyecciones climáticas regionales de CORDEX mediante técnicas dinámicas y estadísticas (CORDyS):PID2020-116595RB-I00, funded by the Agencia Estatal de Investigación of the Spanish Government.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publication Artículo científico (JournalArticle)

Consistency of the regional response to global warming levels from CMIP5 and CORDEX projections

  • Díez Sierra, Javier|||0000-0001-9053-2542
  • Iturbide Martínez de Albéniz, Maialen|||0000-0002-5048-0941
  • Fernández Fernández, Jesús (matemático)|||0000-0002-3483-0008
  • Gutiérrez Llorente, José Manuel
  • Milovac, Josipa|||0000-0001-5648-5279
  • Cofiño González, Antonio Santiago|||0000-0001-7719-979X
Assessing the regional responses to different Global Warming Levels (GWLs; e.g. + 1.5, 2, 3 and 4 ºC) is one of the most important challenges in climate change sciences since the Paris Agreement goal of keeping global temperature increase well below 2 °C with respect to the pre-industrial period. Regional responses to global warming were typically analyzed using global projections from Global Climate Models (GCMs) and, more recently, using higher resolution Regional Climate Models (RCMs) over limited regions. For instance, the IPCC AR6 WGI Atlas provides results of the regional response to different GWLs for several climate variables from both GCMs and RCMs. These results are calculated under the assumption that the regional signal to global warming is consistent between the GCMs and the nested RCMs. In the present study we investigate the above assumption by evaluating the consistency of regional responses to global warming from global (CMIP5) and regional (CORDEX) projections. The dataset aggregated over the new IPCC reference regions, available from the IPCC AR6 WGI Atlas repository, is analyzed here for temperature and precipitation. The existing relationships between the regional climate change signals and global warming are compared for both CMIP5 and CORDEX. Our results show significant linear scaling relationships between regional changes and global warming for most of the regions. CORDEX and CMIP5 show remarkably similar scaling relationships and similar robustness in the emergence of the climate change signal for most of the regions. These results support the use of regional climate models in the context of global warming level studies., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.This work is part of project ATLAS (PID2019-111481RB-I00) funded by MCIN/AEI/10.13039/501100011033. JF and ASC acknowledge support from project CORDyS (PID2020-116595RB-I00) funded by MCIN/AEI/10.13039/501100011033. ASC acknowledges project IS-ENES3 which is funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 824084.