Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Enabling system artifacts reuse through the semantic representation of engineering models: a case study of Simulink models

  • Mendieta Zuniga, Roy Arturo
  • Cibrián Sánchez, Eduardo
  • Álvarez Rodríguez, José María
  • Llorens Morillo, Juan Bautista
Currently, digital twins are being designed to provide a virtual version of complex physical systems. Modelling and simulation techniques and tools are used to design these engineering products embedding domain knowledge in many system artifacts available under different protocols, formats and meta-models. The cost of development of these virtual artifacts is usually very high implying the need of saving time and costs by means of increasing their reusability factor. A first step to ease the reuse relies on the ability of looking up a system artifact according to some input query. To do so, it is necessary to design a knowledge management strategy unifying the structure and representation of these artifacts and provide a search service that can exploit the indexed information. In this work, we propose a semantic model to represent system artifacts and demonstrate its application through a search service consuming simulation models (designed with the Matlab Simulink tool, a block diagram environment for multidomain simulation and Model-Based Design). Furthermore, an experiment has been conducted to show the precision and recall of this semantic search service., The research leading to these results has received funding from the project H2020-ECSEL Arrowhead Tools under grant agreement nº 826452 and from specific national programs and/or funding authorities.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Towards the reuse of physical models within the development life-cycle: a case study of Simulink models

  • Cibrián Sánchez, Eduardo
  • Mendieta Zuniga, Roy Arturo
  • Álvarez Rodríguez, José María
  • Llorens Morillo, Juan Bautista
The research leading to these results has received funding from the project H2020-ECSEL Arrowhead Tools under grant agreement nº 826452 and from specific national programs and/or funding authorities
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Discovering traces between textual requirements and logical models in the functional design of Printed Circuit Boards

  • Cibrián Sánchez, Eduardo
  • Álvarez Rodríguez, José María
  • Mendieta Zuniga, Roy Arturo
  • Llorens Morillo, Juan Bautista
The research leading to these results has received funding from the project H2020-ECSEL Arrowhead Tools under grant agreement nº 826452 and from specific national programs and/or funding
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Towards a Method to Enable the Selection of Physical Models within the Systems Engineering Process: A Case Study with Simulink Models

  • Cibrián Sánchez, Eduardo
  • Álvarez Rodríguez, José María
  • Mendieta Zuniga, Roy Arturo
  • Llorens Morillo, Juan Bautista
The use of different techniques and tools is a common practice to cover all stages in the development life-cycle of systems generating a significant number of work products. These artefacts are frequently encoded using diverse formats, and often require access through non-standard protocols and formats. In this context, Model-Based Systems Engineering (MBSE) emerges as a methodology to shift the paradigm of Systems Engineering practice from a document-oriented environment to a model-intensive environment. To achieve this major goal, a formalised application of modelling is employed throughout the life-cycle of systems to generate various system artefacts represented as models, such as requirements, logical models, and multi-physics models. However, the mere use of models does not guarantee one of the main challenges in the Systems Engineering discipline, namely, the reuse of system artefacts. Considering the fact that models are becoming the main type of system artefact, it is necessary to provide the capability to properly and efficiently represent and retrieve the generated models. In light of this, traditional information retrieval techniques have been widely studied to match existing software assets according to a set of capabilities or restrictions. However, there is much more at stake than the simple retrieval of models or even any piece of knowledge. An environment for model reuse must provide the proper mechanisms to (1) represent any piece of data, information, or knowledge under a common and shared data model, and (2) provide advanced retrieval mechanisms to elevate the meaning of information resources from text-based descriptions to concept-based ones., This research was partially funded by H2020-ECSEL “Intelligent Reliability 4.0” (IREL 4.0; grant agreement: 876659), H2020-ECSEL Joint Undertaking (JU) “Arrowhead Tools for Engineering of Digitalisation Solutions” (grant agreement: 826452), and specific national programs (AEI/10.13039/501100011033).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Towards a method to quantitatively measure toolchain interoperability in the engineering lifecycle: A case study of digital hardware design

  • Álvarez Rodríguez, José María
  • Mendieta Zuniga, Roy Arturo
  • Cibrián Sánchez, Eduardo
  • Llorens Morillo, Juan Bautista
The engineering lifecycle of cyber-physical systems is becoming more challenging than ever. Multiple engineering disciplines must be orchestrated to produce both a virtual and physical version of the system. Each engineering discipline makes use of their own methods and tools generating different types of work products that must be consistently linked together and reused throughout the lifecycle. Requirements, logical/descriptive and physical/analytical models, 3D designs, test case descriptions, product lines, ontologies, evidence argumentations, and many other work products are continuously being produced and integrated to implement the technical engineering and technical management processes established in standards such as the ISO/IEC/IEEE 15288:2015 "Systems and software engineering-System life cycle processes". Toolchains are then created as a set of collaborative tools to provide an executable version of the required technical processes. In this engineering environment, there is a need for technical interoperability enabling tools to easily exchange data and invoke operations among them under different protocols, formats, and schemas. However, this automation of tasks and lifecycle processes does not come free of charge. Although enterprise integration patterns, shared and standardized data schemas and business process management tools are being used to implement toolchains, the reality shows that in many cases, the integration of tools within a toolchain is implemented through point-to-point connectors or applying some architectural style such as a communication bus to ease data exchange and to invoke operations. In this context, the ability to measure the current and expected degree of interoperability becomes relevant: 1) to understand the implications of defining a toolchain (need of different protocols, formats, schemas and tool interconnections) and 2) to measure the effort to implement the desired toolchain. To improve the management of the engineering lifecycle, a method is defined: 1) to measure the degree of interoperability within a technical engineering process implemented with a toolchain and 2) to estimate the effort to transition from an existing toolchain to another. A case study in the field of digital hardware design comprising 6 different technical engineering processes and 7 domain engineering tools is conducted to demonstrate and validate the proposed method., The work leading to these results has received funding from the H2020-ECSEL Joint Undertaking (JU) under grant agreement No 826452-“Arrowhead Tools for Engineering of Digitalisation Solutions” and from specific national programs and/or funding authorities. Funding for APC: Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Semantic recovery of traceability links between system artifacts

  • Álvarez Rodríguez, José María
  • Mendieta Zuniga, Roy Arturo
  • Moreno Pelayo, Valentín
  • Sánchez Puebla Rodríguez, Miguel Ángel
  • Llorens Morillo, Juan Bautista
This paper introduces a mechanism to recover traceability links between the requirements and logical models in the context of critical systems development. Currently, lifecycle processes are covered by a good number of tools that are used to generate different types of artifacts. One of the cornerstone capabilities in the development of critical systems lies in the possibility of automatically recovery traceability links between system artifacts generated in different lifecycle stages. To do so, it is necessary to establish to what extent two or more of these work products are similar, dependent or should be explicitly linked together. However, the different types of artifacts and their internal representation depict a major challenge to unify how system artifacts are represented and, then, linked together. That is why, in this work, a concept-based representation is introduced to provide a semantic and unified description of any system artifact. Furthermore, a traceability function is defined and implemented to exploit this new semantic representation and to support the recovery of traceability links between different types of system artifacts. In order to evaluate the traceability function, a case study in the railway domain is conducted to compare the precision and recall of recovery traceability links between text-based requirements and logical model elements. As the main outcome of this work, the use of a concept-based paradigm to represent that system artifacts are demonstrated as a building block to automatically recover traceability links within the development lifecycle of critical systems., The research leading to these results has received funding from the H2020 ECSEL Joint Undertaking (JU) under Grant Agreement No. 826452 \Arrowhead Tools for Engineering of Digitalisation Solutions" and from speci¯c national programs and/or funding authorities.