Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

CIRMAT Symposium. Abstract book

  • XX Jornada de Materiales
Libro de resúmenes del Simposio: Nuevos desarrollos para una economía circular. XX Jornada de Materiales celebrada en la Universidad Carlos III de Madrid el 24 de febrero de 2022., Synthesis of polyurethanes by chemical upcycling of PET through a circular economy model / M. D. de Dios Caputto, R. Navarro, A. Rubio, A. Marcos-Fernández : Financial support provided by Spanish National Research Council JAEINT_20_00798 and Ministry of Science and Innovation RTI2018-096636-J-100, RTC2019-007287-2 and PID2020-119047RB-I00., MANDALA strategy towards a circular model for multilayer packaging films / H. J. Salavagione, H. Seyler, P. Shuttleworth, A. Flores, M. A. Gómez-Fatou, G.J. Ellis : Funding for MANDALA in the EU Horizon 2020 Research and Innovation Programme in the Bio-Based Industries Joint Undertaking (BBI-JU), Grant Agreement no. 837715., Circular Economy in Timber Construction / D. F. Llana, G. Íñiguez-González, J. García-Navarro, F. Arriaga : The RECOWERS project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101025786. The InFutUReWood project was supported under the umbrella of ERA-NET Cofund ForestValue and has received funding from MICIU-Spain [PCI2019-103544]., Sustainable and economic solution for H₂ and CO₂ recovery in the petrochemical industry / Nastasiya Yuriychuk, Eva M. Maya, Mar López-González : Acknowledgments to MINECO of Spain PID2019-108552GB-100 for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Designing New Sustainable Polyurethane Adhesives: Influence of the Nature and Content of Diels–Alder Adducts on Their Thermoreversible Behavior

  • Quiles-Díaz, Susana
  • Seyler, Helga
  • Ellis, Gary James
  • Shuttleworth, Peter S.
  • Flores, Araceli
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
With a view to the development of new sustainable and functional adhesives, two Diels–Alder (DA) adducts are incorporated as a third component into the curing process of solvent-based and solvent-free polyurethanes in this study. The influence of the nature and content of the DA molecules on the retro-DA (rDA) reaction and its reversibility and cyclability is investigated. It is demonstrated that the bonding/debonding properties of the adhesives are mainly controlled by the concentration of the DA adducts, with a minimum thermoreversible bond (TB) content required that depends on the system and the total ratio between all the diols in the formulation. For the solvent-based system, rDA/DA reversibility can be repeated up to ~20 times without deterioration, in contrast to the solvent-free system where a gradual loss in the DA network reconstruction efficiency is observed. Despite this limitation, the solvent-free system presents clear advantages from an environmental point of view. The changes observed in the physical properties of these new thermoreversible adhesives are of great relevance for recycling strategies and, in particular, their potential for separating multilayered film packaging materials in order to recycle the individual polymer films involved., This research was funded by the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union´s Horizon 2020 research and innovation program under grant agreement N◦ 837715., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Remotely triggered reversible bonds in adhesives for sustainable multi-layered packaging

  • Salavagione, Horacio J.
  • Quiles-Díaz, Susana
  • Seyler, Helga
  • Ellis, Gary James
  • Shuttleworth, Peter S.
  • Gómez-Fatou, Marián A.
Plastic films used in food packaging are multi-layered materials comprising different polymer layers each with a specific function, which makes the packaging very difficult to recycle, ending up in landfills or incineration plants. Innovative approaches are required to resolve this issue and this work focuses on the adhesive layers used to bind the polymer layers together. We report on the development of a new, reusable polyurethane adhesive containing dynamic covalent Diels-Alder bonds that can be reversibly opened and closed by controlling the temperature. The breaking/formation cycle of the thermoreversible bonds in the adhesive can be repeated up to ∼20 times. In addition, the incorporation of radiation-absorbing nanoparticles into the adhesive facilitates bond breaking that can be remotely triggered in tens of seconds using NIR radiation. This new adhesive concept will facilitate the recycling of the individual polymer layers, opening the door to a circular economy solution towards sustainable packaging., This project has received funding from the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation programme under grant agreement N◦ 837715, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymer nanocomposite adhesives with internal nano-heaters to facilitate multilayer laminate separation

  • Seyler, H.
  • Quiles-Díaz, S.
  • Ellis, Gary James
  • Shuttleworth, Peter S.
  • Flores, A.
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
Laminating adhesives used in multilayer films present strong, irreversible adhesion that limits the produced packaging systems to single-use applications. From a sustainability point of view, the recovery of individual polymers after use is imperative and a pivotal step is to make this adhesion reversible via breakdown of the adhesive structure. This work describes a promising strategy based on the incorporation of graphene into thermoreversible adhesive resin formulations to trigger the rupture of the adhesive network by exposure to IR radiation. Graphene is a thermal absorber that abruptly heats up under irradiation and efficiently dissipates this heat to the surrounding environment causing the adhesive network to collapse, resulting in remarkable changes in its mechanical properties. In this study, graphene was incorporated at low concentrations (0.25–1 wt %) into solvent-free polyurethane adhesives containing thermoreversible moieties. The photothermal effect at different loadings was evaluated and the formulation displaying the best balance between photothermal effect and optical properties was selected. Furthermore, the effect of irradiation on cyclability, fluidity and mechanical properties of the graphene-containing adhesives is evaluated. Good cyclability was observed and samples with a graphene loading of 0.25 wt % and 11.5 wt % of thermoreversible bonds (TRB) showed the largest difference in elongation under IR irradiation with respect to the neat adhesive. Creep testing demonstrated that the strain of this sample increases by almost 200% after irradiation due to the breakdown of the three-dimensional adhesive network triggered by the photothermal effect of graphene., This work was supported by the Bio Based Industries Joint Under- taking (BBI-JU) under the European Union’s Horizon 2020 Research and Innovation Programme (Grant agreement N◦ 837715).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing the mechanical behaviour of reusable polyurethane networks with graphene as internal nano-heater

  • Vega, Juan Francisco
  • Salavagione, Horacio J.
  • Nadin-Ambrosio, Fabio
  • Seyler, H.
  • Cardil, A.
  • Gómez-Fatou, Marián A.
  • Flores, Araceli
This article is part of a special issue entitled: POLY-CHAR 2024 published in Polymer, Polyurethane adhesives with thermoreversible Diels Alder (DA) bonds offer a sustainable approach to improve recyclability of multilayer packaging. This study evaluates the effect of graphene, used as an internal heater to trigger bond breakage, on the mechanical properties by indentation and shear rheology. Particular attention is paid to their reversibility and cyclability upon thermal heating or IR irradiation. Graphene initially reduces the modulus by disrupting network formation resulting in reduced DA bond incorporation and crosslink density. The intrinsic properties of graphene counterbalance this effect at higher loadings. Rheology shows that graphene accelerates the retro-DA reaction during conventional thermal heating. Indentation tests indicate that IR expo- sure temporarily reduces the mechanical properties, with full recovery after 100 min. Both rheological and indentation methods show improved mechanical properties (modulus and hardness) after the initial retro-DA reaction, which stabilise after further thermal treatments and are related to the formation of a new network structure., This project has received funding from the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation program under grant agreement Nº 837715. The authors wish to thank the MICIU/AEI/10.13039/501100011033, Spain, for funding under grants PID2019-107710 GB-I00, PID2020- 117573 GB-I00. Project PIE202250E035 (CSIC) is also acknowledged. The TEM-BIOPHYM Service at the IEM-CSIC is acknowledged for granting the use of the rheology facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Indentation creep in polymers and polymer nanocomposites

  • Flores, Araceli
Creep refers to the capacity of a material to bear load and it represents a fundamental property for material design. Indentation appears as a most convenient tool for the study of creep behavior in polymers. The present work gathers information on the indentation creep response of a wide variety of polymers, taken from different sources, and offers a comprehensive overview of the factors that can influence creep. It is shown that viscoplastic behavior assessed by the traditional technique is influenced by the internal polymer characteristics and also by external factors. As a general rule, chain stiffness, chain branching, crystallinity, physical ageing and rigid-filler addition promote creep resistance. The advent of modern instrumented indenters allowed analysis of viscoelastic flow. Interestingly, it is found that the creep parameters obtained from traditional and instrumented testing are in close agreement provided the viscoplastic regime prevails. Graphene-polymer nanocomposites are used to illustrate the reduced creep rate, creep extent and strain rate sensitivity found upon addition of the rigid filler to a number of thermoplastic matrices., This research was funded by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE), grant number PID2020-117573GB-I00. It was also supported by the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement N° 837715).