Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

ZooMS confirms geometric morphometrics species identification of ancient sheep and goat

  • Jeanjean, Marine
  • McGrath, Krista
  • Valenzuela-Lamas, Silvia
  • Nieto Espinet, Ariadna
  • Schafberg, Renate
  • Parés Casanova, Pere-Miquel
  • Jiménez Manchón, Sergio
  • Guintard, Claude
  • Tekkouk, Faiza
  • Ridouh, Rania
  • Mureau, Cyprien
  • Evin, Allowen
Geometric morphometrics can effectively distinguish isolated third lower molars of present-day sheep and goat, but its applicability to archaeological specimens has yet to be established. Using a modern reference collection of 743 sheep and goats and a two-dimensional landmark-based geometric morphometric (GMM) protocol, this study aimed to morphometrically identify 109 archaeological specimens, used as case studies, dating from the Late Neolithic to the modern period/era. These morphometric identifications were then compared to molecular identifications via collagen peptide mass fingerprinting, known as Zooarcheology by Mass Spectrometry (ZooMS). ZooMS confirmed the morphometric identifications for 104 specimens, with the five misidentified specimens all morphometrically identified as goat. Modern sheep and goats have larger teeth and distinct shapes compared to their archaeological counterparts, suggesting strong differences between archaeological and modern specimens potentially linked with recent breed improvement or geographical origin of the specimens. In addition, for both species, some of the archaeological dental morphologies do not match with any of our modern references. This study validates the applicability of geometric morphometrics for identifying isolated archaeological sheep and goat teeth. It represents a stepping stone for future, non-destructive, bioarchaeological studies of the two species., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 852573).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Sorting the flock : Quantitative identification of sheep and goat from isolated third lower molars and mandibles through geometric morphometrics

  • Jeanjean, Marine
  • Haruda, Ashleigh
  • Salvagno, Lenny
  • Schafberg, Renate
  • Valenzuela-Lamas, Silvia
  • Nieto Espinet, Ariadna
  • Forest, Vianney
  • Blaise, Emilie
  • Vuillien, Manon
  • Mureau, Cyprien
  • Evin, Allowen
Sheep and goat are often herded together and show morphological similarities in their skeleton. Being able to identify archaeological remains of these two taxa to species level is particularly important for understanding and characterising past herding practices. Discrete criteria are now available to identify a large number of their bones and teeth, and quantitative approaches have been developed for post-cranial elements but not for mandible and isolated teeth. In this paper we explore the discriminating potential of geometric morphometrics to identify modern sheep and goat third lower molar and mandible and its application on archaeological specimens. The size and shape of the mandible and the third lower molar of 143 modern specimens (101 sheep and 42 goats) were quantified using 2D-landmark and sliding semi-landmarks geometric morphometric approaches. The results show that sheep and goat differ in terms of the size, shape, and form (i.e. size and shape together) in both studied elements. Classification accuracy of the two species reaches 93.3% (CI: 90.0–95.7%) for third lower molar shape, 62.7% (CI 57.1–68.6%) for third lower molar size, 95.2% (CI: 92.0–97.4%) for mandible shape and 84.0% (CI 81.6–86.8%) for mandible size. Form does not provide better classification than shape alone. Sex and age appear to have little impact on the ability to differentiate between sheep and goat, despite the two species displaying distinct sexual dimorphism and changes through age. The same methodology was then applied on 32 Middle Ages third lower molars from Missignac-Saint Gilles le Vieux, Aimargues, France. The identifications obtained through geometric morphometrics were only partially congruent with the identifications based on visual observations calling for caution in the interpretation and further investigations. Further research should include molecular identification of the archaeological specimens to assess whether the geometric morphometric identification can be made with confidence for all periods and all geographic areas. Nevertheless, the results obtained with the newly developed geometric morphometric protocols represent an important contribution toward a better understanding of past livestock husbandry practices., This work was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 852573). LS work was supported by a Marie Skłodowska-Curie Fellowship (MSCA-IF, grant agreement 842612); ANE and SV works were supported by the ZooMWest project (ERC-StG 716298).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sorting the flock: Quantitative identification of sheep and goat from isolated third lower molars and mandibles through geometric morphometrics

  • Jeanjean, Marine
  • Haruda, Ashleigh
  • Salvagno, Lenny
  • Schafberg, Renate
  • Valenzuela-Lamas, Silvia
  • Nieto-Espinet, Ariadna
  • Forest, Vianney
  • Blaise, Emilie
  • Vuillien, Manon
  • Mureau, Cyprien
  • Evin, Allowen
Sheep and goat are often herded together and show morphological similarities in their skeleton. Being able to identify archaeological remains of these two taxa to species level is particularly important for understanding and characterising past herding practices. Discrete criteria are now available to identify a large number of their bones and teeth, and quantitative approaches have been developed for post-cranial elements but not for mandible and isolated teeth. In this paper we explore the discriminating potential of geometric morphometrics to identify modern sheep and goat third lower molar and mandible and its application on archaeological specimens. The size and shape of the mandible and the third lower molar of 143 modern specimens (101 sheep and 42 goats) were quantified using 2D-landmark and sliding semi-landmarks geometric morphometric approaches. The results show that sheep and goat differ in terms of the size, shape, and form (i.e. size and shape together) in both studied elements. Classification accuracy of the two species reaches 93.3% (CI: 90.0–95.7%) for third lower molar shape, 62.7% (CI 57.1–68.6%) for third lower molar size, 95.2% (CI: 92.0–97.4%) for mandible shape and 84.0% (CI 81.6–86.8%) for mandible size. Form does not provide better classification than shape alone. Sex and age appear to have little impact on the ability to differentiate between sheep and goat, despite the two species displaying distinct sexual dimorphism and changes through age. The same methodology was then applied on 32 Middle Ages third lower molars from Missignac-Saint Gilles le Vieux, Aimargues, France. The identifications obtained through geometric morphometrics were only partially congruent with the identifications based on visual observations calling for caution in the interpretation and further investigations. Further research should include molecular identification of the archaeological specimens to assess whether the geometric morphometric identification can be made with confidence for all periods and all geographic areas. Nevertheless, the results obtained with the newly developed geometric morphometric protocols represent an important contribution toward a better understanding of past livestock husbandry practices., This work was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 852573). LS work was supported by a Marie Skłodowska-Curie Fellowship (MSCA-IF, grant agreement 842612); ANE and SV works were supported by the ZooMWest project (ERC-StG 716298). We gratefully thank Odile Maufras (INRAP), Marie Balasse (CNRS-MNHN), Sara Parisot (INRAE, UE0321) and the “AgroPaléoRepro" program (MUTALIM MITI-CNRS-INRAE 2019–2020 dir M. Balasse) as well as Armelle Gardeisen (CNRS-ASM), Lionel Gourichon (CNRS-CEPAM), Laurent Vergelys and Nicolas Brahic. We also acknowledge the DRAC SRA-Occitanie and the “Centre de Dépôt Archéologique du Gard”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ZooMS confirms geometric morphometrics species identification of ancient sheep and goat

  • Jeanjean, Marine
  • McGrath, Krista
  • Valenzuela-Lamas, Silvia
  • Nieto-Espinet, Ariadna
  • Schafberg, Renate
  • Parés-Casanova, Pere M.
  • Jiménez-Manchón, Sergio
  • Guintard, Claude
  • Tekkouk, Faiza
  • Ridouh, Rania
  • Mureau, Cyprien
  • Evin, Allowen
Geometric morphometrics can effectively distinguish isolated third lower molars of present-day sheep and goat, but its applicability to archaeological specimens has yet to be established. Using a modern reference collection of 743 sheep and goats and a two-dimensional landmark-based geometric morphometric (GMM) protocol, this study aimed to morphometrically identify 109 archaeological specimens, used as case studies, dating from the Late Neolithic to the modern period/era. These morphometric identifications were then compared to molecular identifications via collagen peptide mass fingerprinting, known as Zooarcheology by Mass Spectrometry (ZooMS). ZooMS confirmed the morphometric identifications for 104 specimens, with the five misidentified specimens all morphometrically identified as goat. Modern sheep and goats have larger teeth and distinct shapes compared to their archaeological counterparts, suggesting strong differences between archaeological and modern specimens potentially linked with recent breed improvement or geographical origin of the specimens. In addition, for both species, some of the archaeological dental morphologies do not match with any of our modern references. This study validates the applicability of geometric morphometrics for identifying isolated archaeological sheep and goat teeth. It represents a stepping stone for future, non-destructive, bioarchaeological studies of the two species., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 852573). We would like to thank the Laboratori de Proteòmica CSIC-UAB at the Universitat Autònoma de Barcelona for access to the Bruker Ultraflex III MALDI-TOF-MS, and the Centres Cientifics i Tecnologics of the Universitat de Barcelona for access to the AB SCIEX 4700 MALDI-TOF-MS. We acknowledge the Service Regional de l'Archéologie of the Occitanie Region for permission for studying and destructive sampling of the archaeological material, as well as the directors of the different excavations included in this study.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Olive diversity in Pompeii: morphometric analysis of fuel-derived charred stones (c. 50-79 CE) from two bakeries to trace regional production and dissemination of domesticated forms

  • Testas, Juliette
  • Matterne, Véronique
  • Monteix, Nicolas
  • Amoretti, Valeria
  • Ater, Mohammed
  • Belaj, Angjelina
  • Blanchet, Claire
  • Bouby, Laurent
  • Bonhomme, Vincent
  • Comegna, Chiara
  • Ivorra, Sarah
  • Girard, Vincent
  • Kaniewski, David
  • Kassout, Jalal
  • Lasserre, Hélène
  • Limier, Bertrand
  • Lopes, Clément
  • Pagnoux, Clémence
  • Paradis, Laure
  • Pinatel, Christian
  • de la Rosa, Raúl
  • Ryo, Alexis
  • Zuchtriegel, Gabriel
  • Besnard, Guillaume
  • Evin, Allowen
  • Terral, Jean Frédéric
The exceptional preservation of archaeological remains in the Vesuvian area offers a unique taphonomic window into Roman agricultural practices. This study presents a geometric morphometric analysis, using Elliptical Fourier Transforms (EFT), applied to an extensive dataset of charred olive stones (Olea europaea L.) recovered from the combustion structures of two bakeries in Pompeii. Rather than focusing exclusively on urban consumption, these fuel-derived bio-archives, accumulated during the final decades of the city's occupation (c. 50–79 CE), provide crucial insights into regional agrosystems and ancient cultivar diversity.To evaluate ancient agrobiodiversity, well-preserved charred archaeological stones were compared against a comprehensive modern reference collection representing diverse Mediterranean morphotypes. Statistical analyses reveal high morphometric diversity within the bakeries, characterized by several distinct morphotypes. The material displays strong morphological affinities with modern varieties known for specialized uses (including oil production, table olives, and dual-purpose profiles), alongside a notable proportion of stones compatible with wild or feral phenotypes.These results suggest a sophisticated regional sourcing network, likely connected to Campanian villae rusticae, where olive pressing waste (pomace) was recycled as an engineered fuel source for urban workshops. Beyond its local implications for Pompeian economic networks, this study demonstrates the efficiency of geometric morphometrics on charred stones to trace local production setups, reconstruct ancient biogeographic dissemination histories, and document the complex landscape exploitation strategies of the Roman Mediterranean., This study received support from the PISTRINA programme (2008-2014) led by N. Monteix, the LIA/IRP EVOLEA (PI: J.-F. Terral), the PATRIMOLEA project (Défi-clé Sciences du passé - Occitanie region, France – PI: J.-F. Terral) and the ERC DEMETER project (ERC-StG 852573, PI: A. Evin)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

ZooMS confirms geometric morphometrics species identification of ancient sheep and goat

  • Jeanjean, Marine
  • McGrath, Krista
  • Valenzuela-Lamas, Silvia
  • Nieto Espinet, Ariadna
  • Schafberg, Renate
  • Parés Casanova, Pere-Miquel
  • Jiménez Manchón, Sergio
  • Guintard, Claude
  • Tekkouk, Faiza
  • Ridouh, Rania
  • Mureau, Cyprien
  • Evin, Allowen
Geometric morphometrics can effectively distinguish isolated third lower molars of present-day sheep and goat, but its applicability to archaeological specimens has yet to be established. Using a modern reference collection of 743 sheep and goats and a two-dimensional landmark-based geometric morphometric (GMM) protocol, this study aimed to morphometrically identify 109 archaeological specimens, used as case studies, dating from the Late Neolithic to the modern period/era. These morphometric identifications were then compared to molecular identifications via collagen peptide mass fingerprinting, known as Zooarcheology by Mass Spectrometry (ZooMS). ZooMS confirmed the morphometric identifications for 104 specimens, with the five misidentified specimens all morphometrically identified as goat. Modern sheep and goats have larger teeth and distinct shapes compared to their archaeological counterparts, suggesting strong differences between archaeological and modern specimens potentially linked with recent breed improvement or geographical origin of the specimens. In addition, for both species, some of the archaeological dental morphologies do not match with any of our modern references. This study validates the applicability of geometric morphometrics for identifying isolated archaeological sheep and goat teeth. It represents a stepping stone for future, non-destructive, bioarchaeological studies of the two species., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 852573).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sorting the flock : Quantitative identification of sheep and goat from isolated third lower molars and mandibles through geometric morphometrics

  • Jeanjean, Marine
  • Haruda, Ashleigh
  • Salvagno, Lenny
  • Schafberg, Renate
  • Valenzuela-Lamas, Silvia
  • Nieto Espinet, Ariadna
  • Forest, Vianney
  • Blaise, Emilie
  • Vuillien, Manon
  • Mureau, Cyprien
  • Evin, Allowen
Sheep and goat are often herded together and show morphological similarities in their skeleton. Being able to identify archaeological remains of these two taxa to species level is particularly important for understanding and characterising past herding practices. Discrete criteria are now available to identify a large number of their bones and teeth, and quantitative approaches have been developed for post-cranial elements but not for mandible and isolated teeth. In this paper we explore the discriminating potential of geometric morphometrics to identify modern sheep and goat third lower molar and mandible and its application on archaeological specimens. The size and shape of the mandible and the third lower molar of 143 modern specimens (101 sheep and 42 goats) were quantified using 2D-landmark and sliding semi-landmarks geometric morphometric approaches. The results show that sheep and goat differ in terms of the size, shape, and form (i.e. size and shape together) in both studied elements. Classification accuracy of the two species reaches 93.3% (CI: 90.0–95.7%) for third lower molar shape, 62.7% (CI 57.1–68.6%) for third lower molar size, 95.2% (CI: 92.0–97.4%) for mandible shape and 84.0% (CI 81.6–86.8%) for mandible size. Form does not provide better classification than shape alone. Sex and age appear to have little impact on the ability to differentiate between sheep and goat, despite the two species displaying distinct sexual dimorphism and changes through age. The same methodology was then applied on 32 Middle Ages third lower molars from Missignac-Saint Gilles le Vieux, Aimargues, France. The identifications obtained through geometric morphometrics were only partially congruent with the identifications based on visual observations calling for caution in the interpretation and further investigations. Further research should include molecular identification of the archaeological specimens to assess whether the geometric morphometric identification can be made with confidence for all periods and all geographic areas. Nevertheless, the results obtained with the newly developed geometric morphometric protocols represent an important contribution toward a better understanding of past livestock husbandry practices., This work was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 852573). LS work was supported by a Marie Skłodowska-Curie Fellowship (MSCA-IF, grant agreement 842612); ANE and SV works were supported by the ZooMWest project (ERC-StG 716298).