Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Effects of solid-state polymerization on the structure and properties of degraded poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

  • Orden Hernández, María Ulagares De La
  • Bernabé Vírseda, Ignacio
  • Beltrán González, Freddys R.
  • Martínez Urreaga, Joaquín
In the transition from a linear to a circular economy, polymer source and end-of-life scenarios must be considered when selecting a plastic for a given application. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a highly promising alternative to fossil fuel-based polymers in certain applications, because it is a biodegradable and biobased polymer with some good properties. When possible, mechanical recycling is the best option, over chemical and organic recycling, for PHBV waste. However, it must be considered that PHBV is a biopolyester that can undergo significant degradation during its use, and that degraded PHBV residues generate low-performance recycled materials, thus greatly reducing the feasibility of mechanical recycling. In this context, solid-state polymerization (SSP) is proposed as a simple, green, and cost-effective alternative to reverse the effect of the degradation and valorize the residues. In this work, PHBV residues with different levels of degradation have been obtained and subjected to SSP in vacuum for different times and temperatures, without solvents or catalysts, in order to study the effects of SSP on the structure and properties of the residues and optimize the process. The effect of SSP on the viscosity of the recycled material, obtained by melt processing the waste, has also been studied. The results indicate that the effects of the SSP depend largely on the level of degradation of the waste and that significant improvement in molecular weights and viscosities (up to 40 %), and thermal stability, can be achieved when wastes with significant degradation are treated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of a mechanically recycled polylactide/halloysite nanocomposite in an ethanolic food simulant

  • Beltrán, Freddys R.
  • Arrieta, Marina P.
  • Hortal, Yaiza
  • Gaspar, Gerald
  • de la Orden, Mª Ulagares
  • Martínez Urreaga, Joaquín
[EN] This work aims to study the effect of immersion in a ethanolic food simulant in mechanically recycled poly(lactic acid) (PLAR) and its nanocomposites reinforced with halloysite nanotubes (HNT). PLAR was obtained by subjecting PLA to an accelerated ageing process, which includes photochemical, thermal and hydrothermal ageing steps, followed by a final demanding washing step. PLAR was further reinforced with 4 %wt. HNT to improve the properties of the PLAR films. The materials were melt compounded by melt extrusion and processed into films by compression molding. The resulting films were exposed to food simulant D1 (50 %vol. ethanol solution) for 10 days at 40 °C. The intrinsic viscosity, crystallization behavior, thermal stability as well as the mechanical performance were analyzed before and after the contact with the food simulant. The swelling, plasticizing and hydrolyzing effect of the food simulant led to an important decrease of the intrinsic viscosity of all the samples, along with a significant increase of the crystallinity. Thermal stability was negatively affected by the decrease of the molecular weight, while the high crystallinity values resulted in materials with higher Vickers hardness values after the immersion in the food simulant., This work was supported by European Union’s Horizon 2020 research and innovation program [grant agreement No. 860407 BIO-PLASTICS EUROPE], by MINECO-Spain [project CTM2017-88989-P] as well as Universidad Politécnica de Madrid [project UPM RP 160543006].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of PBAT Processability and Mechanical Performance by Blending with Pine Resin Derivatives for Injection Moulding Rigid Packaging with Enhanced Hydrophobicity

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldas, Miguel
  • Arrieta, Marina P.
[EN] Polybutylene adipate-co-terephthalate (PBAT) is a biodegradable polymer with good features for packaging applications. However, the mechanical performance and high prices of PBAT limit its current usage at the commercial level. To improve the properties and reduce the cost of PBAT, pine resin derivatives, gum rosin (GR) and pentaerythritol ester of GR (UT), were proposed as sustainable additives. For this purpose, PBAT was blended with 5, 10, and 15 wt.% of additives by melt-extrusion followed by injection moulding. The overall performance of the formulations was assessed by tensile test, microstructural, thermal, and dynamic mechanical thermal analysis. The results showed that although good miscibility of both resins with PBAT matrix was achieved, GR in 10 wt.% showed better interfacial adhesion with the PBAT matrix than UT. The thermal characterization suggested that GR and UT reduce PBAT melting enthalpy and enhance its thermal stability, improving PBAT processability. A 10 wt.% of GR significantly increased the tensile properties of PBAT, while a 15 wt.% of UT maintained PBAT tensile performance. The obtained materials showed higher hydrophobicity than neat PBAT. Thus, GR and UT demonstrated that they are advantageous additives for PBAT-resin compounding for rigid food packaging which are easy to process and adequate for industrial scalability. At the same time, they enhance its mechanical and hydrophobic performance., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO), projects: PROMADEPCOL (MAT2017-84909-C2-2-R) and CTM2017-88989-P as well as by the European Union s Horizon 2020 research and innovation program under grant agreement no. 860407 BIO-PLASTICS EUROPE. M.A. thanks Secretaría de Educación Superior, Ciencia, Tecnología e Innovación (SENESCYT) and Escuela Politécnica Nacional (EPN). C.P. thanks Santiago Grisolía fellowship (GRISOLIAP/2019/113) from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silane-Functionalized Sheep Wool Fibers from Dairy Industry Waste for the Development of Plasticized PLA Composites with Maleinized Linseed Oil for Injection-Molded Parts

  • Pawlak, Franciszek
  • Aldas, Miguel
  • Arrieta, Marina Patricia
  • Parres, F.|||0000-0002-1083-9526
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Poly(lactic acid) (PLA) was plasticized with maleinized linseed oil (MLO) and further reinforced with sheep wool fibers recovered from the dairy industry. The wool fibers were firstly functionalized with 1 and 2.5 phr of tris(2-methoxyethoxy)(vinyl) (TVS) silane coupling agent and were further used in 1, 5, and 10 phr to reinforce the PLA/MLO matrix. Then, the composite materials were processed by extrusion, followed by injection-molding processes. The mechanical, thermal, microstructural, and surface properties were assessed. While the addition of untreated wool fibers to the plasticized PLA/MLO matrix caused a general decrease in the mechanical properties, the TVS treatment was able to slightly compensate for such mechanical losses. Additionally, a shift in cold crystallization and a decrease in the degree of crystallization were observed due to the fiber silane modification. The microstructural analysis confirmed enhanced interaction between silane-modified fibers and the polymeric matrix. The inclusion of the fiber into the PLA/MLO matrix made the obtained material more hydrophobic, while the yellowish color of the material increased with the fiber content., This research was funded by MINECO under projects: PROMADEPCOL: MAT2017-84909-C2-2-R and CTM2017-88989-P as well as by European Union s Horizon 2020 research and innovation program under grant agreement no. 860407 BIO-PLASTICS EUROPE.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Assessing the feasibility of mechanical recycling for plastic tree shelters used in agriculture and forestry: degradation and contamination of waste

  • Bernabé Vírseda, Ignacio
  • Orden Hernández, María Ulagares de la
  • Blázquez Blázquez, Enrique
  • Cerrada García, María Luisa
  • Castro Varela, Gabriela
  • Fernández Fernández, Victoria
  • Cobo Golpe, Miguel
  • Ramil Criado, María
  • Rodríguez Pereiro, Isaac
  • Martínez Urreaga, Joaquín
Plastic tree shelters are widely used in agriculture and forestry to protect young plants from predators and generate a favorable microclimate, thus increasing survival and growth rates. Considering that several thousand tons of plastic tree shelters (mostly polypropylene, PP) are used each year in Europe and that discarded aged shelters can release microplastics, residues of additives, and even pesticides, the destination of this material after use is a matter of concern. Mechanical recycling is the best option for these residues, but its technical feasibility depends on the polymer degradation level and its contamination, both by inorganic materials and by residues of additives and/or agrochemicals. Therefore, not all tree shelter waste is suitable for recycling. The main objective of this work is to characterize the degradation and contamination of PP tree shelters used in agriculture and forestry, to obtain information on the feasibility of their mechanical recycling. The results show the presence of fungicide residues only in some tubes used in agriculture. Although the external faces of the tubes appear strongly degraded, the degradation of the overall tube material is much less due to a dilution effect. Thus, we can conclude that most PP tree shelters, even those used for several years in harsh climates, could be successfully subjected to mechanical recycling
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of solid-state polymerization on the structure and properties of mechanically recycled poly(lactic acid)

  • Beltrán, F. R.
  • Climent-Pascual, Esteban
  • Orden, M. U. de la
  • Martínez Urreaga, J.
Poly(lactic acid) (PLA) is one of the most important alternatives to fossil-fuel based polymers due to its biodegradability and good properties. However, the growing production along with the increasing resistance to degradation of the newer grades could lead to waste management problem. The application of mechanical recycling, which could be the best valorization method for biodegradation-resistant PLA residues, is limited by the degradation of the polymer, which decreases its performance, so it is interesting to develop simple and acceptable methods to improve the recycled plastic. The aim of this work is to study the effect of thermal treatments of PLA residues (with two levels of degradation) on the structure and properties of recycled PLA. During thermal treatments, both polycondensation and degradation reactions take place, and the net result depends on the degradation level of the residue and the time and temperature of the treatment. In adequate conditions, polycondensation reactions increase the molecular weight of the residue and lead to significant improvements of the mechanical and thermal properties of the recycled plastic. These results suggest that thermal treatments represent a simple, cost-effective and environmentally friendly method to improve the recyclability of PLA and, hence, the environmental impact of this plastic., Authors received funding from European Union's Horizon 2020 research and innovation program under grant agreement No. 860407 BIO-PLASTICS EUROPE, as well as from MINECO-Spain (project CTM2017-88989-P) and Universidad Politécnica de Madrid (project UPM RP 160543006).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of addition of organic fillers on the properties of mechanically recycled PLA

  • Beltrán, F. R.
  • Gaspar, G.
  • Dadras Chomachayi, M.
  • Jalali-Arani, A.
  • Lozano-Pérez, Antonio A.
  • Cenis, J. L.
  • Orden, M. U. de la
  • Pérez, Ernesto
  • Martínez Urreaga, J. M.
Poly(lactic acid) (PLA) is one of the most used biobased and biodegradable polymers. Due to their high stability, some of the newest grades of PLA are only degradable under severe industrial conditions. For these grades, mechanical recycling is a viable end-of-life option, with great environmental advantages. However, the polymer undergoes degradation during its service life and in the melt reprocessing, which leads to a decrease in properties that can compromise the recyclability of PLA. The goal of this work was to evaluate the usefulness of adding small amounts of two organic fillers, chitosan, and silk fibroin nanoparticles, during the recycling process for improving the properties of the recycled plastic. The degradation level of the aged polymer and the nature and amount of filler affect the performance of the recycled plastics. The fillers reduce the degradation during the melt reprocessing of PLA previously subjected to severe hydrolysis, thus increasing the intrinsic viscosity of the recycled plastic. A careful selection of the added organic filler lead to recycled plastics with improvements in some key mechanical, thermal, and barrier properties. Thus, the use of organic fillers represents a cost-effective and environmentally sound way for improving the mechanical recycling of bioplastics., This work was supported by MINECO-Spain (pro-ject CTM2017-88989-P), Universidad Politécnica de Madrid (projectUPM RP 160543006), and the European Commission (Horizon 2020,project 860407-BIO-PLASTICS EUROPE). Dr. Lozano-Pérez’s researchcontract at IMIDA was partially supported (80%) by the ERDF/FEDEROperational Programme“Murcia”CCI N° 2007ES161PO001 (ProjectNo. 14-20/20)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biodegradable Nanocomposites Developed from PLA/PCL Blends and Silk Fibroin Nanoparticles: Study on the Microstructure, Thermal Behavior, Crystallinity and Performance

  • Dadras Chomachayi, M.
  • Jalali-Arani, A.
  • Beltrán, F. R.
  • Orden, M. U. de la
  • Martínez Urreaga, J.
Recently, the use of natural materials has grown in the plastics industry. In this study, novel bio-nanocomposites were developed from poly(lactic acid)/poly(ε-caprolactone) (PLA/PCL) blends and silk fibroin nanoparticles (SFNP). SFNP were successfully synthesized from silk fibroin (SF) and analyzed by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The obtained results revealed that the well-ordered structures in SF were changed to the amorphous structures in SFNP. Then (PLA/PCL) blends containing 10–30% of PCL were prepared and characterized. According to the obtained results, the PLA/PCL (70/30) blend was selected as the optimized sample for further studies. The scanning electron microscopy results illustrated that the addition of 1% of SFNP into this blend improved the compatibility between PLA and PCL and reduced the PCL droplet sizes from 1.170 ± 92 to 794 ± 46 nm. The results from TGA analysis indicated that the presence of SFNP enhanced the thermal stability of materials at high temperatures. The crystallization kinetics results revealed that while SFNP promoted the crystallization of neat PLA, the crystallization rate of PLA/PCL blend was decreased upon the incorporation of nanofiller. Furthermore, the PLA/PCL/SFNP exhibited higher microhardness and barrier properties than the neat blend. The results suggest that the developed bio-nanocomposites are promising materials for demanding applications such as food packaging., The authors thank Perstorp Co. Ltd., Sweden, for supplying the PCL Capa™ 6800, MINECO-Spain (Project CTM2017- 88989-P) and Universidad Politécnica de Madrid (Project UPM RP 160543006). This project has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 860407 BIO-PLASTICS EUROPE
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing the feasibility of mechanical recycling for plastic tree shelters used in agriculture and forestry: degradation and contamination of waste

  • Bernabé, Ignacio
  • Orden Hernández, M. Ulagares de la
  • Blázquez-Blázquez, Enrique
  • Cerrada, María L.
  • Castro, Gabriela
  • Fernández-Fernández, Victoria
  • Cobo-Golpe, Miguel
  • Ramil, María
  • Rodríguez, Isaac
  • Martínez Urreaga, Joaquín
Plastic tree shelters are widely used in agriculture and forestry to protect young plants from predators and generate a favorable microclimate, thus increasing survival and growth rates. Considering that several thousand tons of plastic tree shelters (mostly polypropylene, PP) are used each year in Europe and that discarded aged shelters can release microplastics, residues of additives, and even pesticides, the destination of this material after use is a matter of concern. Mechanical recycling is the best option for these residues, but its technical feasibility depends on the polymer degradation level and its contamination, both by inorganic materials and by residues of additives and/or agrochemicals. Therefore, not all tree shelter waste is suitable for recycling. The main objective of this work is to characterize the degradation and contamination of PP tree shelters used in agriculture and forestry, to obtain information on the feasibility of their mechanical recycling. The results show the presence of fungicide residues only in some tubes used in agriculture. Although the external faces of the tubes appear strongly degraded, the degradation of the overall tube material is much less due to a dilution effect. Thus, we can conclude that most PP tree shelters, even those used for several years in harsh climates, could be successfully subjected to mechanical recycling., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors acknowledge the funding from the European Union’s Horizon 2020 research and innovation program (Project BIO-PLASTICS EUROPE, grant agreement No. 860407), the Ministry of Science and Innovation of Spain (through the EU Next Generation program, Projects TED2021-1299 62BC42 and TED2021-130166B-I00), the Xunta de Galicia (Project ED431C2021/06, co-financed by the EU FEDER program), and the Universidad Politécnica de Madrid (Projects UPM RP2205430163 and RP2505430069)., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Evaluation of the technical viability of distributed mechanical recycling of PLA 3D printing wastes

  • Beltrán-González, Freddys R.
  • Arrieta Dillon, Marina Patricia
  • Moreno-Almansa, Eduardo
  • Gaspar-Roa, Gerald Manuel
  • Muneta, Luisa M.
  • Carrasco-Gallego, Ruth
  • Yáñez-Gutiérrez, Susana
  • Hidalgo-Carvajal, David
  • Orden Hernández, María Ulagares De La
  • Martínez-Urreaga, Joaquín
3D printing PLA wastes were recovered from a well-known reference grade and from different sources. The recovered wastes were subjected to an energic washing step and then reprocessed into films by melt-extrusion, followed by compression molding to simulate the industrial processing conditions. The obtained materials were characterized and the optical, structural, thermal and crystallization behavior are reported. The mechanical recycling process leads to an increase of the crystallinity and a decrease of the intrinsic viscosity of the formulations, particularly in the sample based on blends of different 3D-PLA wastes. Moreover, the obtained films were disintegrated under composting conditions in less than one month and it was observed that recycled materials degrade somewhat faster than the starting 3D-PLA filament, as a consequence of the presence of shorter polymer chains. Finally, to increase the molecular weight of the recycled materials, the 3D-PLA wastes were submitted to a solid-state polymerization process at 110, 120, and 130 _C, observing that the recycled 3D-wastes materials based on a well-known reference grade experiences an improvement of the intrinsic viscosity, while that coming from different sources showed no significant changes. Thus, the results show that 3D printing PLA products provides an ideal environment for the implementation of distributed recycling program, in which wastes coming from well-known PLA grades can successfully be processed in films with good overall performance.
Docta Complutense
Publication Artículo científico (JournalArticle)

Effect of oligomeric lactic acid plasticizer on the mechanical recycling of poly(3‑hydroxybutyrate‑co‑3‑hydroxyvalerate)

  • Bernabé-Vírseda, Ignacio
  • Amarilla, Erika
  • Orden Hernández, María Ulagares De La
  • Martínez-Urreaga, Joaquín
  • Beltrán, Freddys R.
Bioplastics such as polyhydroxyalkanoates (PHA) emerge as an interesting alternative to conventional fossil fuel-based plastics and as part of the solution their associated environmental issues. Nevertheless, end-of-life scenarios are still a major concern, especially within a circular economy framework. When feasible, mechanical recycling appears as the best alternative, since it saves raw materials and energy. However, the viability of mechanical recycling can be compromised by the degradation of the plastic during its use and during the recycling process and by the presence of certain additives. Consequently, the main objective of this work is to study the effect of accelerated ageing and mechanical recycling on the structure and properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-based formulations. The obtained results suggest that accelerated ageing and mechanical recycling led only to a slight degradation of the pure PHBV material, along with small variations in the thermal and mechanical properties. However, the plasticized PHBV formulations showed a more severe degradation and increased thermal stability and stiffness, which could be result of the elimination of the plasticizer during the recycling. Overall, mechanical recycling seems to be an interesting valorization strategy for PHBV wastes, although especial attention should be paid to the additives present in the materials.
Docta Complutense
Publication Artículo científico (JournalArticle)

Tube shelters from agricultural plastic waste: An example of circular economy

  • Martínez Urreaga, Joaquín
  • Beltrán González, Freddys R.
  • Acosta García, Jessica
  • Aguinaco Castro, María Teresa
  • Fonseca Valero, Carmen
  • Ochoa Mendoza, Almudena
  • Oliet-Palá, Juan
  • Gonzalez Sánchez, Carlos
  • Orden Hernández, María Ulagares De La
The use of recycled plastics in applications similar to those of the original plastic is of great interest for the fulfillment of the circular economy policies objectives. In this work, the feasibility of using recycled agricultural plastics in the manufacture of tube shelters for plant seedlings, which can be used in forest restoration and other plantations, has been investigated. The recycled plastics and their blends with a virgin polyethylene were characterized using spectroscopic techniques and thermal analysis. The effects of the recycled plastics on the optical and mechanical properties of the blends, which are key properties in the selection of materials for tube shelters, were measured using UVeVis spectroscopy and tensile testing. Thermal stability and degradation during an accelerated aging test were also investigated. The use of recycled plastics did not alter the stability of the blends, but there were decreases in elongation at break and UV and blue light transmission, with small decreases in red light transmission and without significant changes in the red-far red ratio. Blends with less than 50 wt% of recycled plastics show only small decreases in the elongation and provide an adequate light transmission for seedlings. Therefore, the results indicate that significant amounts of recycled agricultural plastics can be used in the manufacture of tube shelters, with both economic and environmental advantages.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effect of solid-state polymerization on the structure and properties of mechanically recycled poly(lactic acid)

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Climent Pascual, Esteban|||0000-0003-3492-8942
  • Orden, M.U. de la
  • Martínez Urreaga, Joaquín
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Influence of addition of organic fillers on the properties of mechanically recycled PLA

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Gaspar, Gerald
  • Dadras Chomachayi, Masoud
  • Jalali-Arani, A.
  • Lozano Pérez, A. Abel
  • Cenis, José L.
  • Orden Hernández, María Ulagares de la|||0000-0002-7721-5216
  • Pérez Tabernero, Ernesto
  • Martínez Urreaga, Joaquín
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Biodegradable Nanocomposites Developed from PLA/PCL Blends and Silk Fibroin Nanoparticles: Study on the Microstructure, Thermal Behavior, Crystallinity and Performance

  • Dadras Chomachayi, Masoud
  • Jalali-Arani, Azam
  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Orden Hernández, María Ulagares de la|||0000-0002-7721-5216
  • Martínez Urreaga, Joaquín
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Tube shelters from agricultural plastic waste: An example of circular economy

  • Martínez Urreaga, Joaquín
  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Acosta, Jessica
  • Aguinaco, Teresa
  • Fonseca Valero, Carmen|||0000-0001-5698-2574
  • Ochoa Mendoza, Almudena|||0000-0002-6378-6448
  • Oliet Pala, Juan Antonio|||0000-0001-7719-9327
  • González-Sánchez, C.
  • Orden, M.U. de la
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effect of solid-state polymerization on the structure and properties of mechanically recycled poly(lactic acid)

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Climent Pascual, Esteban|||0000-0003-3492-8942
  • Orden Hernández, María Ulagares de la
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effect of lignocellulosic nanoparticles extracted from yerba mate (Ilex paraguariensis) on the structural, thermal, optical and barrier properties of mechanically recycled poly(lactic acid)

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Arrieta Dillon, Marina P.|||0000-0003-1816-011X
  • Gaspar, Gerald
  • Orden Hernández, María Ulagares de la
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Tube shelters from agricultural plastic waste: An example of circular economy

  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Acosta, Jessica
  • Aguinaco, Teresa
  • Fonseca Valero, Carmen|||0000-0001-5698-2574
  • Ochoa Mendoza, Almudena|||0000-0002-6378-6448
  • Oliet Pala, Juan Antonio|||0000-0001-7719-9327
  • González Sánchez, C.
  • Orden Hernández, María Ulagares de la
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Technical Evaluation of Mechanical Recycling of PLA 3D Printing Wastes

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Arrieta Dillon, Marina P.|||0000-0003-1816-011X
  • Moreno Escribano, Eduardo
  • Gaspar, Gerald
  • Martínez Muneta, María Luisa|||0000-0003-3725-7400
  • Carrasco Gallego, Ruth|||0000-0002-9542-3836
  • Yáñez Gutiérrez, Susana
  • Hidalgo Carvajal, David|||0000-0001-7771-0906
  • Orden Hernández, María Ulagares de la
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effect of yerba mate and silk fibroin nanoparticles on the mi-gration properties in ethanolic food simulants and composting disintegrability of recycled PLA nanocomposites

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Arrieta Dillon, Marina P.|||0000-0003-1816-011X
  • Elena Antón, Diego
  • Lozano Pérez, Antonio
  • Cenis, José L.
  • Gaspar, Gerald
  • Orden Hernández, María Ulagares de la
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Development of tri-layer antioxidant packaging systems based on recycled PLA/sodium caseinate/recycled PLA reinforced with lignocellulosic nanoparticles extracted from yerba mate waste

  • Arrieta Dillon, Marina P.|||0000-0003-1816-011X
  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Abarca de las Muelas, Sara
  • Gaspar, Gerald
  • Hernández, Rafael
  • Orden Hernández, María Ulagares de la
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Evaluation of the Technical Viability of Distributed Mechanical Recycling of PLA 3D Printing Wastes

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Arrieta Dillon, Marina P.|||0000-0003-1816-011X
  • Moreno Almansa, Eduardo|||0000-0003-4833-0570
  • Gaspar, Gerald
  • Martínez Muneta, María Luisa|||0000-0003-3725-7400
  • Carrasco Gallego, Ruth|||0000-0002-9542-3836
  • Yáñez Gutiérrez, Susana|||0000-0003-0795-3122
  • Hidalgo Carvajal, David|||0000-0001-7771-0906
  • Orden Hernández, María Ulagares de la
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effects of solid-state polymerization on the structure and properties of degraded poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

  • Beltran Gonzalez, Freddys|||0000-0002-7897-8311
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
  • Bernabe Virseda, Ignacio|||0000-0001-9795-8466
  • Orden Hernández, María Ulagares de la|||0000-0002-7721-5216
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Theoretical Prediction of Electrical Conductivity Percolation of Poly(lactic acid)—Carbon Nanotube Composites in DC and RF Regime

  • Beltrán González, Freddys|||0000-0002-7897-8311
  • Aksas, Hammouche
  • Sidi Salah, Lakhdar|||0000-0003-4487-4845
  • Danlée, Yann|||0000-0002-3718-0194
  • Huynen, Isabelle|||0000-0002-8504-2896
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effect of oligomeric lactic acid plasticizer on the mechanical recycling of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

  • Bernabe Virseda, Ignacio|||0000-0001-9795-8466
  • Amarilla, Erika
  • Orden Hernández, María Ulagares de la|||0000-0002-7721-5216
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
  • Beltrán González, Freddys|||0000-0002-7897-8311
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Effects of chitosan thin barrier layers on the oxygen permeability and optical properties of poly(lactic acid) and poly (3-hydroxybutyrate-co-3-hydroxyvalerate) multilayers

  • Bernabe Virseda, Ignacio|||0000-0001-9795-8466
  • Orden Hernández, María Ulagares de la|||0000-0002-7721-5216
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Assessing the feasibility of mechanical recycling for plastic tree shelters used in agriculture and forestry: degradation and contamination of waste

  • Bernabe Virseda, Ignacio|||0000-0001-9795-8466
  • Orden Hernández, María Ulagares de la|||0000-0002-7721-5216
  • Blázquez Blázquez, Enrique|||0000-0003-2488-5635
  • Cerrada, María Luisa|||0000-0003-4261-0627
  • Castro Flores, Gabriela|||0000-0003-0709-1796
  • Fernandez Fernandez, Victoria|||0000-0002-3688-9302
  • Cobo Golpe, Miguel|||0000-0002-3794-3251
  • Ramil Criado, María|||0000-0002-7724-9184
  • Rodríguez Pereiro, Isaac|||0000-0002-9693-2042
  • Martínez Urreaga, Joaquín|||0000-0002-5206-8897
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

Assessing Provisions and Requirements for the Sustainable Production of Plastics: Towards Achieving SDG 12 from the Consumers’ Perspective

  • Leal Filho, W.
  • Barbir, J.
  • Özuyar, P. G.
  • Núñez, E.
  • Díaz Sarachaga, José Manuel|||0000-0002-4709-2534
  • Guillaume, B.
  • Anholon, R.
  • Rampasso, I. S.
  • Swart, J.
  • Velázquez, L.
  • Ng, T. F.
This study has received funding from the European Union’s Horizon 2020-Research and Innovation Framework Programme through the research project BIO-PLASTICS EUROPE, under grant agreement No. 860407.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Artículo científico (JournalArticle)

Tube shelters from agricultural plastic waste: An example of circular economy

  • Martínez Urreaga, Joaquín
  • Beltrán, F. R.
  • Acosta, J.
  • Aguinaco, T.
  • Fonseca, C.
  • Ochoa, A.
  • Oliet Palá, J. A.
  • González Sánchez, Carlos|||0000-0002-3111-7282
  • de la Orden, M. U.
This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 860407 BIO-PLASTICS EUROPE, as well as from MINECO-Spain (project CTM2017-88989-P ). The authors also acknowledge the financial support of Universidad Politécnica de Madrid (project UPM RP 160543006 ).