Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron speciation in animal tissues using AC magnetic susceptibility measurements: Quantification of magnetic nanoparticles, ferritin, and other iron-containing species

  • Fernández-Afonso, Yilian
  • Asín, Laura
  • Beola, Lilianne
  • Moros, María
  • Fuente, Jesús M. de la
  • Fratila, Raluca M.
  • Grazú, Valeria
  • Gutiérrez, Lucía
The simultaneous detection and quantification of several iron-containing species in biological matrices is a challenging issue. Especially in the frame of studies using magnetic nanoparticles for biomedical applications, no gold-standard technique has been described yet and combinations of different techniques are generally used. In this work, AC magnetic susceptibility measurements are used to analyze different organs from an animal model that received a single intratumor administration of magnetic nanoparticles. The protocol used for the quantification of iron associated with the magnetic nanoparticles is carefully described, including the description of the preparation of several calibration standard samples of nanoparticle suspensions with different degrees of dipolar interactions. The details for the quantitative analysis of other endogenous iron-containing species such as ferritin or hemoglobin are also described. Among the advantages of this technique are that tissue sample preparation is minimal and that large amounts of tissue can be characterized each time (up to hundreds of milligrams). In addition, the very high specificity of the magnetic measurements allows for tracking of the nanoparticle transformations. Furthermore, the high sensitivity of the instrumentation results in very low limits of detection for some of the iron-containing species. Therefore, the presented technique is an extremely valuable tool to track iron oxide magnetic nanoparticles in samples of biological origin., This work was funded by the Ministerio de Ciencia, Innovación y Universidades (MCIU), the Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER) through the MACBETH project (PGC2018-096016-B-I00 to R.M.F and L.G.). Funding was also received from the European Commission through the TBMED project (DT-NMBP-02-2018, ID 814439, to R.M.F.) and the MagicCellGene Project (M-ERA.NET COFUND call 2016, funded by Ministerio de Economía y Competitividad, MINECO, Spain, in the framework of the PCIN-2017-060 project, to V.G.). Authors also acknowledge support from Gobierno de Aragón and Fondos FEDER for funding the Bionanosurf (E15_17R) research group. MINECO and FSE/Agencia Estatal de Investigación are also acknowledged for the Ramón y Cajal subprogram grants RYC-2015-17640 to R.M.F., RYC-2014-15512 to L.G., and RYC2019-026860-I to M.M.. Y.F-A. thanks the Santander-Universidad Zaragoza Fellowship program for her PhD position., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Zeta potential as a tool for functional materials development

  • Serrano-Lotina, Ana M.
  • Portela, Raquel
  • Baeza, Patricio
  • Alcolea-Rodríguez, Víctor
  • Villarroel, M.
  • Ávila García, Pedro
The importance of the isoelectric point for the preparation and characterization of functional materials to understand their behavior and optimize their performance is highlighted, with especial focus on industrial catalysts. In different liquid-phase steps involved in materials synthesis, the knowledge of the surface charge as a function of the pH of the medium is fundamental, since it is the dynamizing agent of processes such as gelation, peptization, coagulation and agglomeration to form solid particles. Therefore, zeta potential (ζ) measurements, often based on electrophoretic migration techniques, are a powerful source of information. The basic principles are introduced to explain through relevant examples the possibilities for materials design. Regarding materials preparation, the measurement of the zeta potential to control the synthesis and coating of supports is reviewed, with special attention to shaped supports. Aspects as the influence of the binders on the supports properties depending on their mutual interaction are analyzed, with example systems based on TiO2 or Al2O3 and natural silicates such as sepiolite. Also, how the knowledge of ζ as a function of pH allows, by choosing the appropriate pH, the preferential impregnation of noble metals on porous supports, as well as the washcoating of dense ceramic monoliths with porous supports. Special attention has been paid to surfaces characterization based on the use of zeta potential measurements to estimate the formation and relative location of species, the apparent surface coverage, or the adsorption and reactivity, to establish synthesis strategies to achieve specific properties. © 2023 The Authors, The authors are grateful for the financial support from the European Commission for MACBETH project (GA 869896), from the Spanish Ministry for novaCO2 project (PID2020-118593RB-C21), and from the Comunidad de Madrid for ACES2030-CM project (S2018/EMT-4319)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of Support Structure on Catalytic Performance of Supported Liquid-Phase (SLP) Catalysts in Hydroformylation of 1-Butene

  • Madani, M.
  • Schill, L.
  • Zahrtmann, N.
  • Portela, Raquel
  • Arsenjuk, L.
  • Franke, R.
  • Fehrmann, R.
  • Riisager, A.
Several supported liquid-phase (SLP) catalysts with immobilized Rh-biphephos complexes on monolithic supports were prepared and applied for continuous gas-phase hydroformylation (HyFo) of 1-butene. The support comprised macroporous monolithic silicon carbide (SiC) with deposited silica nanoparticles (NPs) in order to provide mesopores with enhanced capillary forces to retain the liquid-phase. Variable parameters were examined for the monolithic SiC supports, including size and loading of deposited silica NPs and intermediate calcination between silica deposition steps to obtain the most efficient support configuration for the SLP system. The SLP catalysts with larger deposited silica NPs gave higher catalytic activity (i.e. 1-butene conversion and turnover frequency) compared to the supports with smaller sized silica NPs. However, the selectivity towards the preferred linear aldehyde was higher in the SLP catalysts with supports containing less silica with small silica NPs. Importantly, the prepared SLP catalyst systems showed long-term stability in HyFo with negligible formation of high boiling aldol condensation products. © 2023, The Author(s)., Funding Horizon 2020, 869896, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Support Screening to Shape Propane Dehydrogenation SnPt-Based Catalysts

  • Festa, G.
  • Serrano-Lotina, Ana M.
  • Meloni, E.
  • Portela, Raquel
  • Ruocco, C
  • Martino, Marco
  • Palma, Vincenzo
Propane dehydrogenation reaction (PDH) is an extremely attractive way to produce propylene; however, the catalysts often lead to byproduct formation and suffer from deactivation. This research focuses on the development of efficient Pt/Sn-based shaped catalysts by utilizing Mg-modified mesoporous silica, sepiolite (natural SiMgOx mesoporous clay), and sepiolite/bentonite/alumina as supports with the aim of achieving superior stability and selectivity for industrial propylene production by PDH. The catalysts were prepared by sequential impregnation of the supports with the corresponding solutions of tin chloride and platinum chloride, by obtaining a nominal loading of 0.7 wt % of Sn and 0.5 wt % of Pt. A range of analytical techniques were used to characterize the catalysts, including X-ray diffraction, nitrogen physisorption isotherms, Hg intrusion porosimetry, thermogravimetric analyses, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The basicity of the catalysts was assessed using carbon dioxide temperature-programmed desorption (CO2-TPD). The results confirm that the support material plays a critical role in catalyst performance; in particular, the presence of weak basic sites, due to magnesium addition, improved selectivity to propylene and reduced coke formation. Catalytic pellets of Sn-Pt supported on macroporous sepiolite or sepiolite and bentonite-modified mesoporous alumina performed comparably with propane conversion very close to thermodynamic equilibrium and selectivity to propylene above 95%. The latter support led to improved stability and was regenerated at milder temperatures, making it suitable for industrial applications. © 2024 The Authors. Published by American Chemical Society., This research has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 869896., Supporting Information, Peer reviewed