Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Analysis and RTL Correlation of Instruction Set Simulators for Automotive Microcontroller Robustness Verification

  • Espinosa García, Jaime
  • Abella, Jaume
  • Hernández Luz, Carles|||0000-0003-1192-6223
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
Increasingly complex microcontroller designs for safety-relevant automotive systems require the adoption of new methods and tools to enable a cost-effective verification of their robustness. In particular, costs associated to the certification against the IS026262 safety standard must be kept low for economical reasons. In this context, simulation-based verification using instruction set simulators (ISS) arises as a promising approach to partially cope with the increasing cost of the verification process as it allows taking design decisions in early design stages when modifications can be performed quickly and with low cost. However, it remains to be proven that verification in those stages provides accurate enough information to be used in the context of automotive microcontrollers. In this paper we analyze the existing correlation between fault injection experiments in an RTL microcontroller description and the information available at the ISS to enable accurate ISS-based fault injection., The research leading to these results has received funding from the ARTEMIS Joint Undertaking VeTeSS project under grant agreement number 295311. This work has also been funded by the Ministry of Science and Technology of Spain under contract TIN2012-34557 and HiPEAC. Jaume Abella is partially supported by the Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Towards Certification-aware Fault Injection Methodologies Using Virtual Prototypes

  • Espinosa García, Jaime
  • Abella, Jaume
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
  • Hernández Luz, Carles|||0000-0003-1192-6223
Safety-critical applications are required today to meet more and more stringent standards than ever. In the need of reducing the costs associated with the certification step, early robustness evaluation can provide valuable information, as long as it is fast and accurate enough. Microarchitectural simulators have been employed for testing reliability properties in several domains in the past, but their use in the process of robustness verification of safety critical systems has not been validated yet, as opposed to RTL or gate-level simulations. In the present work, we propose a methodology to improve the accuracy of faultinjection results when targeting robustness verification, by using microarchitectural simulators and virtual prototypes for an early estimation of deviations with respect to the certification standards., The research leading to these results has received funding from the Ministry of Science and Technology of Spain under contract TIN2012-34557 and HiPEAC. Likewise, Jaume Abella is partially supported by the Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An FPGA accelerator of the wavefront algorithm for genomics pairwise alignment

  • Haghi, Abbas
  • Marco Sola, Santiago|||0000-0001-7951-3914
  • Álvarez Martí, Lluc|||0000-0003-0506-8867
  • Diamantopoulos, Dionysios
  • Hagleitner, Christoph
  • Moretó Planas, Miquel|||0000-0002-9848-8758
In the last years, advances in next-generation sequencing technologies have enabled the proliferation of genomic applications that guide personalized medicine. These applications have an enormous computational cost due to the large amount of genomic data they process. The first step in many of these applications consists in aligning reads against a reference genome. Very recently, the wavefront alignment algorithm has been introduced, significantly reducing the execution time of the read alignment process. This paper presents the first FPGA- based hardware/software co-designed accelerator of such relevant algorithm. Compared to the reference WFA CPU-only implementation, the proposed FPGA accelerator achieves performance speedups of up to 13.5× while consuming up to 14.6× less energy.ed medicine. These applications have an enormous computational cost due to the large amount of genomic data they process. The first step in many of these applications consists in aligning reads against a reference genome. Very recently, the wavefront alignment algorithm has been introduced, significantly reducing the execution time of the read alignment process. This paper presents the first FPGA- based hardware/software co-designed accelerator of such relevant algorithm. Compared to the reference WFA CPU-only imple- mentation, the proposed FPGA accelerator achieves performance speedups of up to 13.5× while consuming up to 14.6× less energy., This work has been supported by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and Innovation (contract PID2019-107255GB-C21/AEI/10.13039/501100011033), by the Generalitat de Catalunya (contracts 2017-SGR-1414 and 2017-SGR-1328), by the IBM/BSC Deep Learning Center initiative, and by the DRAC project, which is co-financed by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014-2020 with a grant of 50% of total eligible cost. Ll. Alvarez has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under the Juan de la Cierva Formacion fellowship No. FJCI-2016-30984. M. Moreto has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship No. RYC-2016-21104., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

GPU4S: Major project outcomes, lessons learnt and way forward

  • Kosmidis, Leonidas
  • Rodríguez Ferrández, Iván
  • Jover Álvarez, Álvaro
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Lachaize, Jérôme
  • Notebaert, Olivier
  • Certain, Antoine
  • Steenari, David
Embedded GPUs have been identified from both private and government space agencies as promising hardware technologies to satisfy the increased needs of payload processing. The GPU4S (GPU for Space) project funded from the European Space Agency (ESA) has explored in detail the feasibility and the benefit of using them for space workloads. Currently at the closing phases of the project, in this paper we describe the main project outcomes and explain the lessons we learnt. In addition, we provide some guidelines for the next steps towards their adoption in space., This work is funded by ESA under the GPU4S (GPU for Space) project (ITT AO/1-9010/17/NL/AF). It is also partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grants PID2019-107255GB and FJCI-2017-34095 and HiPEAC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

The UP2DATE baseline research platforms

  • Jover Álvarez, Álvaro
  • Calderón Torres, Alejandro Josué
  • Rodríguez Ferrández, Iván
  • Kosmidis, Leonidas
  • Asifuzzaman, Kazi
  • Uven, Patrick
  • Gruttner, Kim
  • Poggi, Tomaso
  • Agirre, Irune
The UP2DATE H2020 project focuses on highperformance heterogeneous embedded platforms for critical systems. We will develop observability and controllability solutions to support online updates while ensuring safety and security for mixed-criticality tasks. In this paper, we describe the rationale behind the selection of the baseline research platforms which will be used to develop and demonstrate the project concepts, including a performance comparison to identify the most efficient one., This work is funded by the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465). It is also partially supported by the Spanish Ministry of Economy and Competitiveness under grants PID2019-107255GB and FJCI-2017-34095 and HiPEAC., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An FPGA accelerator of the wavefront algorithm for genomics pairwise alignment

  • Haghi, Abbas
  • Marco Sola, Santiago
  • Álvarez Martí, Lluc
  • Diamantopoulos, Dionysios
  • Hagleitner, Christoph
  • Moretó Planas, Miquel
In the last years, advances in next-generation sequencing technologies have enabled the proliferation of genomic applications that guide personalized medicine. These applications have an enormous computational cost due to the large amount of genomic data they process. The first step in many of these applications consists in aligning reads against a reference genome. Very recently, the wavefront alignment algorithm has been introduced, significantly reducing the execution time of the read alignment process. This paper presents the first FPGA- based hardware/software co-designed accelerator of such relevant algorithm. Compared to the reference WFA CPU-only implementation, the proposed FPGA accelerator achieves performance speedups of up to 13.5× while consuming up to 14.6× less energy.ed medicine. These applications have an enormous computational cost due to the large amount of genomic data they process. The first step in many of these applications consists in aligning reads against a reference genome. Very recently, the wavefront alignment algorithm has been introduced, significantly reducing the execution time of the read alignment process. This paper presents the first FPGA- based hardware/software co-designed accelerator of such relevant algorithm. Compared to the reference WFA CPU-only imple- mentation, the proposed FPGA accelerator achieves performance speedups of up to 13.5× while consuming up to 14.6× less energy., This work has been supported by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and Innovation (contract PID2019-107255GB-C21/AEI/10.13039/501100011033), by the Generalitat de Catalunya (contracts 2017-SGR-1414 and 2017-SGR-1328), by the IBM/BSC Deep Learning Center initiative, and by the DRAC project, which is co-financed by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014-2020 with a grant of 50% of total eligible cost. Ll. Alvarez has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under the Juan de la Cierva Formacion fellowship No. FJCI-2016-30984. M. Moreto has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramon y Cajal fellowship No. RYC-2016-21104., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The UP2DATE baseline research platforms

  • Jover Álvarez, Álvaro
  • Calderón Torres, Alejandro Josué
  • Rodríguez Ferrández, Iván
  • Kosmidis, Leonidas
  • Asifuzzaman, Kazi
  • Uven, Patrick
  • Gruttner, Kim
  • Poggi, Tomaso
  • Agirre, Irune
The UP2DATE H2020 project focuses on highperformance heterogeneous embedded platforms for critical systems. We will develop observability and controllability solutions to support online updates while ensuring safety and security for mixed-criticality tasks. In this paper, we describe the rationale behind the selection of the baseline research platforms which will be used to develop and demonstrate the project concepts, including a performance comparison to identify the most efficient one., This work is funded by the European Commission’s Horizon 2020 programme under the UP2DATE project (grant agreement 871465). It is also partially supported by the Spanish Ministry of Economy and Competitiveness under grants PID2019-107255GB and FJCI-2017-34095 and HiPEAC., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

GPU4S: Major project outcomes, lessons learnt and way forward

  • Kosmidis, Leonidas
  • Rodríguez Ferrández, Iván
  • Jover Álvarez, Álvaro
  • Alcaide Portet, Sergi
  • Lachaize, Jérôme
  • Notebaert, Olivier
  • Certain, Antoine
  • Steenari, David
Embedded GPUs have been identified from both private and government space agencies as promising hardware technologies to satisfy the increased needs of payload processing. The GPU4S (GPU for Space) project funded from the European Space Agency (ESA) has explored in detail the feasibility and the benefit of using them for space workloads. Currently at the closing phases of the project, in this paper we describe the main project outcomes and explain the lessons we learnt. In addition, we provide some guidelines for the next steps towards their adoption in space., This work is funded by ESA under the GPU4S (GPU for Space) project (ITT AO/1-9010/17/NL/AF). It is also partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grants PID2019-107255GB and FJCI-2017-34095 and HiPEAC., Peer Reviewed, Postprint (author's final draft)
Docta Complutense
Publication Artículo científico (JournalArticle)

Generating posit-based accelerators with high-level synthesis

  • Murillo Montero, Raúl
  • Del Barrio García, Alberto Antonio
  • Botella Juan, Guillermo
  • Pilato, Christian
Recently, the posit number system has demonstrated a higher accuracy over standard floating-point arithmetic for many scientific applications. However, when it comes to implementing accelerators for these applications, the tool support for this arithmetic format is still missing, especially during the step. In this paper, we incorporate the posit data type into the high-level synthesis (HLS) design process, so that we can generate the implementation directly from a given behavioral specification, but using posit numbers instead of the classical floating-point notations. Our evaluations show that, even if posit-based circuits require more area than their floating-point counterparts, they offer higher accuracy when using the same bitwidth. For example, using posit arithmetic can reduce computation errors by about two orders of magnitude when compared to using standard floating-point numbers. Our approach also includes an alternative to mitigate the high overheads of the posits and broadening the potential use of this format. We also propose a hybrid scheme that uses posit numbers only in the private local memory, while the accelerator operates in the classic floating-point notation. This solution is useful when the designers want to optimize local memories and data transfers, but still use legacy high-level synthesis (HLS) tools that only support traditional floating-point notations.