Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

UAV fully-actuated: modelo, control y comparación con configuración coplanaria, UAV Fully-Actuated: model, control and comparison with coplanar configuration

  • González-Morgado, Antonio
  • Álvarez-Cía, Carlos
  • Heredia Benot, Guillermo
  • Ollero Baturone, Aníbal
[EN] With the development of aerial robotics, new multi-rotor platforms, known as fully-actuated, have appeared. These platforms have the ability to move without tilting the platform. This article presents a comparison in terms of motion capabilities between a coplanar hexarotor, standard configuration, and a tilted-propellers hexarotor, fully-actuated configuration. For this purpose, this paper presents the design, modelling and control of both configurations. Both platforms are compared with different trajectories through simulations and experiments. Also, unique capabilities of the fully-actuated platform, such as the ability to hover at a tilt angle, are shown. Finally, the use of the fully-actuated platform for visual inspection of bridge beams is included. Video of the paper: https://youtu.be/d95Qvz5hba4, [ES] Con el desarrollo de la robótica aérea han aparecido nuevas plataformas de multirotores de actuación completa (fully-actuated en inglés), las cuales tienen la capacidad de desplazarse sin inclinar la plataforma. Este artículo presenta una comparación en cuanto a capacidades de movimiento entre un hexarotor de rotores coplanarios, configuración estándar, y un hexarotor de rotores inclinados, configuración fully-actuated. Para ello, se presenta el diseño, modelo y control de ambas configuraciones. Tras el montaje de las plataformas, se comparan con diferentes trayectorias, mediante simulaciones y experimentos. Así mismo, se muestran capacidades exclusivas de la plataforma fully-actuated, como la capacidad de mantenerse en hover con un ángulo de inclinación. Finalmente, se presenta la aplicación de la plataforma fully-actuated para inspección visual de techos de puentes. Vídeo del artículo:  https://youtu.be/d95Qvz5hba4, Este trabajo ha sido parcialmente financiado por los proyectos ROBMIND (PDC2021-121524-I00) y HAERA (PID2020-119027RB-I00), financiados por el Ministerio de Economía, Industria y Competitividad, y los proyectos AERIAL-CORE (H2020-2019-871479) y AEROTRAIN (MSCA-ITN-2020-953454), financiados por la Comisión Europea.
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Online 3D LIDAR-based mapping for long-range powerline inspection using UAVs

  • Gutiérrez Rodríguez, Iván
  • Luna Santamaría, Javier
  • López Paneque, Julio
  • Martínez de Dios, José Ramiro
  • Ollero, Aníbal
[Resumen] Existe una creciente demanda industrial de Sistemas Aéreos No Tripulados (UAVs) autónomos para la inspección de infraestructuras eléctricas. Actualmente el mapeo de las lóineas eléctricas se realiza en dos etapas: 1) recolección de datos mediante vehículos aéreos tripulados o no tripulados equipados con LiDAR, cámaras y otros sensores; 2) procesamiento a posteriori de los datos de vuelta en el laboratorio. Este procedimiento es ineficiente y en muchas ocasiones requiere la repetición de los vuelos tras varias semanas para volver a tomar datos. En este artículo se presenta un sistema robótico completamente autónomo para la obtención en tiempo real de mapas 3D basados en LiDAR en misiones de inspección de largo alcance de líneas eléctricas. El sistema propuesto ha sido validado en misiones BVLS con vuelos fuera de la línea de vista (> 3.5 km) en diferentes escenarios de infraestructuras eléctricas con distintas condiciones del entorno y de vegetación. Este artículo presenta el problema planteado, los métodos de mapeo empleados, el diseño del robot, los experimentos realizados y algunos resultados obtenidos., [Abstract] There is a strong industrial demand to develop autonomous Unmanned Aerial Systems (UAVs) for long-range inspection of the electric system. Powerline mapping is currently performed in two stages: 1) data collection by manned or unmanned aerial vehicles equipped with LiDARs, cameras, and other sensors, and 2) offline data processing in the laboratory. This procedure is inefficient and frequently requires to repeat the data collection flights after a number of weeks. This paper describes an aerial robotic system for online and on board building LiDAR-based maps for long-range powerline inspection. It includes autonomous navigation and robust online LiDAR-based mapping methods also integrating GNSS. The system has been validated in Beyond Visual Line of Sight (BVLS) missions (> 3.5 km) in different powerline scenarios with different types conditions and vegetation. The paper describes the problem addressed, the mapping methods used, the designed robot, the experiments, and some obtained results., Ministerio de Universidades; FPU17/0632
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Evaluación experimental del sistema de teleoperación LiCAS para aplicaciones de robótica aérea y de servicio en base fija, Benchmarking the LiCAS dual arm teleoperation system for aerial and ground service robotic applications

  • Suárez Fernández-Miranda, Alejandro
  • Ollero Baturone, Aníbal
[Resumen] Este artículo presenta la evaluación experimental de un sistema de teleoperación cinestético desarrollado para la realización de tareas de manipulación diestra con dos brazos robóticos en aplicaciones aéreas o de base fija, tales como operaciones de mantenimiento en entornos industriales, o la recogida y entrega de paquetes en escenarios logísticos. El sistema consta de una pareja de brazos antropomórficos de muy bajo peso con capacidad de acomodación mecánica (LiCAS) en configuración maestro-esclavo, de tal forma que los movimiento aplicados por el usuario humano en el maestro se replican articulación por articulación al robot esclavo, resultando en una interfaz natural e intuitiva que facilita la transferencia de las habilidades de manipulación entre el humano y el robot. El muy bajo peso de los brazos robóticos (1 - 2.5 kg) hace posible su integración en plataformas multi-rotor de medio tamaño y su fácil despliegue en cualquier escenario de interiores o exteriores. Las capacidades del sistema de teloperación LiCAS han sido evaluadas con una placa de prubeas para manipuladores industriales, así como en una operación de manipulación aérea., [Abstract] This paper presents the experimental evaluation of a kinaesthetic teleoperation system developed for the realization of dexterous bimanual manipulation tasks in aerial or ground service applications such as maintenance operations in industrial settings, or in aerial parcel grasping and delivery in logistics scenarios. The system consists of a pair of lightweight and compliant anthropomorphic dual arm manipulators (LiCAS) in leader-follower configuration, in such a way that the motion commands applied by the human user on the leader dual arm are replicated joint by joint in the follower dual arm, resulting in a natural and intuitive interface that facilitates transferring the human manipulation skills to the robot. The very low weight of the robotic arms (1 – 2.5 kg) makes possible their integration in medium scale multi-rotors and the fast deployment in any indoor/outdoor scenario. The performance of the LiCAS teleoperation system is evaluated with a Task Board used for benchmarking industrial manipulators, as well as in an aerial manipulation operation.
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

UAV fully-actuated: modelo, control y comparación con configuración coplanaria, UAV fully-actuated: model, control and comparison with coplanar configuration

  • González Morgado, Antonio
  • Álvarez-Cía, Carlos
  • Heredia, Guillermo
  • Ollero Baturone, Aníbal
[Resumen] Con el desarrollo de la robótica aérea han aparecido nuevas plataformas de multirotores de actuación completa (fully-actuated en inglés), las cuales tienen la capacidad de desplazarse sin inclinar la plataforma. Este artículo presenta una comparación en cuanto a capacidades de movimiento entre un hexarotor de rotores coplanarios, configuración estándar, y un hexarotor de rotores inclinados, configuración fully-actuated. Para ello, se presenta el diseño, modelo y control de ambas configuraciones. Tras el montaje de las plataformas, se comparan con diferentes trayectorias. Así mismo, se muestran capacidades exclusivas de la plataforma fully-actuated, como la capacidad de mantenerse en hover con un ángulo de inclinación., [Abstract] With the development of aerial robotics, new multi-rotor platforms, known as fullyactuated, have appeared. These platforms have the ability to move without tilting the platform. This article presents a comparison in terms of motion capabilities between a coplanar hexarotor, estandar configuration, and a tilted hexarotor, fully-actuated configuration. For this purpose, this paper presents the design, modelling and control of both configurations. The platforms are compared with different trajectories. It also shows capabilities, unique of the fullyactuated platform, such as the ability to hover with a tilt angle, Este trabajo ha sido parcialmente financiado por el proyecto ARTIC (RTI2018-102224B-I00), financiado por el Ministerio de Economía, Industria y Competitividad, y los proyectos AERIAL-CORE (H2020-2019-871479) y AEROTRAIN (MSCA-ITN-2020-953454), financiados por la Comisión Europea.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A novel charging station on overhead power lines for autonomous unmanned drones

  • Muñoz-Gómez, A.M.
  • Marredo-Píriz, J.M.
  • Ballestín-Fuertes, J.
  • Sanz-Osorio, J.F.
Innovative drone-based technologies provide novel techniques to guarantee the safety and quality of power supply and to perform these tasks more efficiently. Electric multirotor drones, which are at the forefront of technology, face significant flight time limitations due to battery capacity and weight constraints that limit their autonomous operation. This paper presents a novel drone charging station that harvests energy from the magnetic field present in power lines to charge the drone’s battery. This approach relies on a charging station that is easy to install by the drone on an overhead AC power line without modifying the electrical infrastructure. This paper analyses the inductive coupling between the energy harvester and the power line, electrical protection, the power electronics required for maximum power point tracking and the mechanical design of the charging station. A drone that perches on a cable, an end effector for installation procedures and the charging maneuver are described, along with discussion of the robotic and electrical tests performed in a relevant environment. Finally, a lightweight drone charging station capable of harvesting 145 W of power from a 600 A line current is reported.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publication Contribución de congreso (ConferenceOutput)

A vision-based approach for unmanned aerial vehicles to track industrial pipes for inspection tasks

  • Roos-Hoefgeest Toribio, Sara|||0000-0002-6433-6510
  • Cacace, J.
  • Scognamiglio, V.
  • Álvarez García, Ignacio|||0000-0001-9704-0022
  • González de Los Reyes, Rafael Corsino|||0000-0001-8486-1032
  • Ruggiero, F.
  • Lippiello, V.
International Conference on Unmanned Aircraft Systems, ICUAS (2023. Warsaw, Poland), AERIAL-CORE project, European Union's Horizon 2020 research and innovation programme [871479]; AERO-TRAIN project, European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant [953454]; "Severo Ochoa" program for predoctoral research and teaching - Asturias Regional Government (Spain) [PA-20-PF-BP19-067]
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Real-time object geopositioning from monocular target detection/tracking for aerial cinematography

  • Aláez Gómez, Daniel
  • Mygdalis, Vasileios
  • Villadangos Alonso, Jesús
  • Pitas, Ioannis
In recent years, the field of automated aerial cinematography has seen a significant increase in demand for real-time 3D target geopositioning for motion and shot planning. To this end, many of the existing cinematography plans require the use of complex sensors that need to be equipped on the subject or rely on external motion systems. This work addresses this problem by combining monocular visual target detection and tracking with a simple ground intersection model. Under the assumption that the targets to be filmed typically stand on the ground, 3D target localization is achieved by estimating the direction and the norm of the look-at vector. The proposed algorithm employs an error estimation model that accounts for the error in detecting the bounding box, the height estimation errors, and the uncertainties of the pitch and yaw angles. This algorithm has been fully implemented in a heavy-lifting aerial cinematography hexacopter, and its performance has been evaluated through experimental flights. Results show that typical errors are within 5 meters of absolute distance and 3 degrees of angular error for distances to the target of around 100 meters., This work has received funding from the European Union's European Union Horizon 2020 research and innovation program under grant agreements 951911 (AI4Media) and 871479 (AERIAL-CORE).