Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modelling the long-term dynamics and inhibitory effects of crude glycerol impurities in a methanogenic and sulfidogenic UASB bioreactor

  • Valdés Martín, Eric|||0000-0002-7550-4209
  • Gabriel, David|||0000-0002-7713-4192
  • González, Daniel|||0000-0003-0128-6445
  • Munz, Giulio|||0000-0003-2773-2757
The performance of Upflow Anaerobic Sludge Blanket (UASB) bioreactors treating sulfate (SO42-) -rich effluents depends on multiple factors, including microbial interactions and operational conditions. The high complexity of these systems necessitates the use of mathematical modelling tools to better understand the process and predict the long-term impacts of various operational variables. In this work, a mathematical model describing the long-term operation of a sulfate-fed 2.5 L UASB reactor was developed, calibrated and validated. Crude glycerol was used as electron donor to achieve sulfate reduction. The hydraulic model of the UASB was described as a set of CSTRs in series to represent its plug flow-like behavior. The kinetic model included 8 fermentation processes using glycerol as the primary electron source, 5 sulfate-reduction processes using organic and inorganic electron sources, and 2 methanogenic processes. The model tackled the long-term accumulation of the impurities coming from the crude glycerol solution, namely slime -like-substances (SLS), and their inhibitory effects over the three different trophic groups: fermenters, sulfate-reducers and methanogens. A sensitivity analysis and calibration of the most relevant parameters was performed using the experimental data from 280 days of continuous operation of a lab-scale UASB. Volatile suspended solids (VSS), carbon (C) and sulfur (S) species profiles as well as microbial dynamics from initial methanogenic conditions to non-methanogenic conditions due to SLS impact were properly predicted by the model under steady-state feeding conditions. Furthermore, the model was validated using another independent set of data under dynamic-feeding conditions, containing 6 different phases with varying HRT, inlet sulfate and organic carbon concentrations. After successfully validating the model, a scenario analysis was conducted to evaluate two case studies, with different inlet sources: crude glycerol with varying SLS concentrations and pure glycerine (SLS-free). The results of the simulations suggest that heterotrophic SR have greater long-term resistance to the inhibitory effects of SLS, compared to methanogens. Methane production increased with higher C and S loading rates, and the balance between sulfate reduction efficiency and COD removal was optimal at a C/S ratio of 1.6 g C g S-1.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Immobilization of FDH on carbon felt by affinity binding strategy for CO2 conversion

  • Maureira, Diego
  • Rodriguez, Sady Roberto|||0000-0002-6035-6952
  • Romero, Oscar|||0000-0002-0223-5167
  • Guillén, Marina|||0000-0002-9740-9966
  • Álvaro, Gregorio|||0000-0002-2924-8902
  • Wilson, Lorena|||0000-0002-0791-920X
  • Ottone, Carminna|||0000-0003-2713-2997
Enzymatic conversion is a promising option for utilizing CO2 as a renewable C1 source for highvalue chemicals due to the high selectivity and specificity of enzymes, their environmental friendliness, and their ability to operate under mild conditions. The present study addresses CO2 conversion by developing a novel biocatalyst for formic acid production. Immobilization of formate dehydrogenase (FDH) from Candida boidinii onto carbon felt (CF) using an affinity binding approach is explored. Pre-treatment of CF with HNO3 increased nickel content with respect to the untreated and KOH treated CF samples, resulting in a biocatalyst with the highest specific activity. The selected biocatalyst achieved a promising formic acid yield of 78% under pressurized CO2 conditions. Utilizing an 8-bar pressurized reactor led to a productivity of 0.56 mol L⁻¹ h⁻¹. The biocatalyst efficiently catalyzed formic acid synthesis over four consecutive reaction cycles, but its efficiency decreased with each cycle. This research demonstrates the feasibility of simple and efficient FDH immobilization on CF for CO2 conversion. The resulting biocatalyst shows potential for formic acid production, but further investigation is needed to enhance reusability for industrial applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Assessing the Feasibility of Bioscrubbing for Flue Gas Treatment and Sulfur Recovery, A Comparative Study Using Mathematical Modeling, Life Cycle Analysis, and Life Cycle Costing

  • Castagnoli, Alessio
  • Valdés Martín, Eric|||0000-0002-7550-4209
  • Pasciucco, Francesco|||0000-0001-8717-5265
  • Pecorini, Isabella|||0000-0003-3027-7708
  • González, Daniel|||0000-0003-0128-6445
  • Giulio Munz
  • Gabriel, David|||0000-0002-7713-4192
Industrial flue gas emissions are treated with technologies such as wet flue gas desulfurization (FGD) in chemical scrubbers, which are costly. Two-step biological scrubbers have emerged as an alternative for bio-FGD. However, no holistic technoeconomic and environmental comparison of both approaches is yet available. This study evaluates a conventional chemical scrubber (CS) and a bioscrubber (BS) treating sulfur-rich off-gas from a sulfur-based pigment plant. The bioscrubber integrates anaerobic sulfate reduction and partial sulfide oxidation to recover elemental sulfur and biogas. Two BS variants were analyzed, differing in carbon source for sulfate reduction: fossil-derived pure glycerin (BS-PG) and purified crude glycerol (BS-PCG). Mathematical models were integrated with life cycle assessment (LCA) and life cycle costing (LCC). Bioscrubbing enables resource recovery but strongly depends on the carbon source: BS-PG raises environmental impacts in most categories and increases greenhouse gas emissions to about 7277 tCO2eq per year, compared with 1379 tCO2eq for CS, whereas BS-PCG limits them to 1599 tCO2eq and performs better than CS in several impact categories. Nonetheless, the energy and chemical demands for glycerol purification remain challenging. Sensitivity analyses identified gas flow rate, purge fraction, and distance to disposal sites as crucial parameters, indicating that bioscrubbing may be suited for medium-to-small plants. Economic analysis indicates that carbon source purchase dominates costs (≈1.6 M€/year for BS-PG and 1.2 M€/year for BS-PCG), so feasibility hinges on lowering glycerol prices and valorizing biogas. Overall, the integrated assessment highlights key trade-offs and design levers for enhancing the sustainability and viability of bioscrubber systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Successful sulphide-driven partial denitrification, Efficiency, stability and resilience in SRT-controlled conditions

  • Polizzi, Cecilia|||0000-0001-8049-3463
  • Gabriel, David|||0000-0002-7713-4192
  • Munz, Giulio|||0000-0003-2773-2757
Partial denitrification is emerging as a valuable solution for NO supply in Anammox systems. When reduced sulphur compounds are used as electron donors, S-driven Partial Autotrophic Denitrification (PAD) can also be achieved, allowing for an integrated autotrophic nitrogen (N) and sulphur (S) removal from liquid and gaseous streams. The aim of the present work was to maximise NO reduction to NO coupled with complete HS oxidation, by the selective control of influent S/N ratio and sludge retention time (SRT). A 2.5-L chemostat was operated for 115 days and three operational phases were tested at decreasing SRT of 40, 23 and 13 h, testing S/N ratios in the range of 0.5-1 gS/gN. Successful sulphide-driven PAD was achieved and lead to average NO conversion efficiencies as high as77±17% at all the conditions tested, with the highest value of 99% at the lowest S/N of 0.58 gS/gN and SRT of 23 h. Respirometric tests showed that NO uptake rate was stable at 90±10 mgN/gVSS/h, when NO was present as sole electron acceptor or at NO levels as high as 120 mgN/l; on the contrary, NO uptake rates were very sensitive to the applied conditions. Metabarcoding analyses revealed that the microbial community was highly enriched in Sulphur Oxidizing Bacteria (SOB.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Evaluating the suitability of granular anammox biomass for nitrogen removal from vegetable tannery wastewater

  • Polizzi, Cecilia|||0000-0001-8049-3463
  • Lotti, Tommasso
  • Ricoveri, Alex
  • Mori, Gualtiero
  • Gabriel, David|||0000-0002-7713-4192
  • Munz, Giulio|||0000-0003-2773-2757
In the present study, the potential inhibitory effect of biologically pre-treated vegetable tannery wastewater (TW) on anammox granular biomass was evaluated. Beside high organic and chemicals load, vegetable TW are characterised by high salinity and high tannins concentration, the latter belonging to a group of bio-refractory organic compounds, potentially inhibitory for several bacterial species. Recalcitrant tannin-related organic matters and salinity were selected as the two potential inhibitory factors and studied either for their separate and combined effect. Parallel batch tests were performed, with biomass acclimated and non-acclimated to salinity, testing three different conditions: non-saline control test with non-acclimated biomass (CT); saline control test with acclimated biomass (SCT); vegetable tannery wastewater test with acclimated biomass (TWT). Compared with non-saline CT, the specific anammox activity in tests SCT and TWT showed a reduction of 28 and 14%, respectively, suggesting that salinity, at conductivity values of 10 mS/cm (at 25 °C), was the main impacting parameter. As a general conclusion, the study reveals that there is no technical limitation for the application of the anammox process to vegetable TW, but preliminary biomass acclimation as well as regular biomass activity monitoring is recommended in case of long-term applications. To the best of our knowledge, this is the first work assessing the impact of vegetable TW on anammox biomass.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Integrating thermodynamics and mathematical modelling to investigate the stoichiometry and kinetics of sulphide oxidation-nitrate reduction with a special focus on partial autotrophic denitrification

  • Valdés Martín, Eric|||0000-0002-7550-4209
  • Gabriel, David|||0000-0002-7713-4192
  • González, Daniel|||0000-0003-0128-6445
  • Munz, Giulio|||0000-0003-2773-2757
  • Polizzi, Cecilia|||0000-0001-8049-3463
In the present study, the stoichiometry of the Sulphur Oxidizing-Nitrate Reducing (SO-NR) process, with a focus on Partial Autotrophic Denitrification (PAD), has been evaluated through a thermodynamic-based study whereas a model-based approach has been adopted to assess process kinetics. Experimental data on process performance and biomass yields were available from a previous work achieving efficient PAD, where a biomass yield of 0.113 gVSS/gS was estimated. First, the free Gibbs energy dissipation method has been implemented, in order to provide a theoretical framework exploring the boundaries for sulphur oxidizing biomass yields. Second, a screening of available mathematical models describing SO-NR process was conducted and five published models were selected, in order to assess the most suitable model structure for describing the observed PAD kinetics. To the best of our knowledge, none of reported biomass yields are estimated in systems operating PAD as the main process and, analogously, none of the proposed models have been applied to case studies aiming at partial denitrification only. The work showed that the very low biomass yield of 0.117 ± 0.007 gVSS/gS, observed in a PAD system in our previous work, suggests that the conditions applied to achieve partial denitrification resulted in a high energy-dissipating metabolism compared to complete denitrification applications. Models' analysis revealed that nitrite accumulation can be described by a classical Monod kinetics if different μmax are adopted for each intermediate reaction, with Theil Inequality Coefficient values lower than 0.21 for both NO3- and NO2-. Nonetheless, adopting Haldane-type kinetics for nitrite uptake inferred higher identifiability to the model structure, resulting in confidence intervals below ±10% for all the parametric estimations. The thermodynamic and modelling outcomes support the experimental results obtained in the reference study and the critical comparison of model suitability to represent PAD process is believed pivotal to pave the way to its real-scale implementation.