Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Distributed Measurements of Electric Fields Using Optical Fibers: Proposal and Proof-Of-Concept Experiment

  • Magalhães, Regina
  • Pereira, Joao
  • Tarasenko, Oleksandr
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Margulis, Walter
  • Martins, Hugo F.
© 2020 by the authors., Nowadays there is an increasing demand for the cost-effective monitoring of potential threats to the integrity of high-voltage networks and electric power infrastructures. Optical fiber sensors are a particularly interesting solution for applications in these environments, due to their low cost and positive intrinsic features, including small size and weight, dielectric properties, and invulnerability to electromagnetic interference (EMI). However, due precisely to their intrinsic EMI-immune nature, the development of a distributed optical fiber sensing solution for the detection of partial discharges and external electrical fields is in principle very challenging. Here, we propose a method to exploit the third-order and second-order nonlinear effects in silica fibers, as a means to achieve highly sensitive distributed measurements of external electrical fields in real time. By monitoring the electric-field-induced variations in the refractive index using a highly sensitive Rayleigh-based CP-φOTDR scheme, we demonstrate the distributed detection of Kerr and Pockels electro-optic effects, and how those can assign a new sensing dimension to optical fibers, transducing external electric fields into visible minute disturbances in the guided light. The proposed sensing configuration, electro-optical time domain reflectometry, is validated both theoretically and experimentally, showing experimental second-order and third-order nonlinear coefficients, respectively, of χ(2) ~ 0.27 × 10−12 m/V and χ(3) ~ 2.5 × 10−22 m2/V2 for silica fibers., This work was partly supported by: the European Commission (FINESSE, MSCA-ITN-ETN-722509); Spanish Ministerio de Ciencia, Innovación y Universidades (RTI2018-097957-B-C31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326); the European Research Council (OCEAN-DAS: ERC-2019-POC-875302). The work of HFM was supported by the Spanish MINECO (“Juan de la Cierva” postdoc contract IJCI-2017-33856)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-range distributed solar irradiance sensing using optical fibers

  • Magalhães, Regina
  • Costa, Luis
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Braña, Alejandro F.
  • Martins, Hugo F.
15 pags., 9 figs., Until recently, the amount of solar irradiance reaching the Earth surface was considered to be a steady value over the years. However, there is increasing observational evidence showing that this quantity undergoes substantial variations over time, which need to be addressed in different scenarios ranging from climate change to solar energy applications. With the growing interest in developing solar energy technology with enhanced efficiency and optimized management, the monitoring of solar irradiance at the ground level is now considered to be a fundamental input in the pursuit of that goal. Here, we propose the first fiber-based distributed sensor able of monitoring ground solar irradiance in real time, with meter scale spatial resolutions over distances of several tens of kilometers (up to 100 km). The technique is based on an optical fiber reflectometry technique (CP-φOTDR), which enables real time and long-range high-sensitivity bolometric measurements of solar radiance with a single optical fiber cable and a single interrogator unit. The method is explained and analyzed theoretically. A validation of the method is proposed using a solar simulator irradiating standard optical fibers, where we demonstrate the ability to detect and quantify solar irradiance with less than a 0.1 W/m resolution., This research was funded in part by: the European Commission (FINESSE, MSCA-ITN-ETN-722509; Ocean-DAS 875302); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-B-C31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Time-expanded phase-sensitive optical time-domain reflectometry

  • Soriano-Amat, Miguel
  • Martins, Hugo F.
  • Duran, V.
  • Costa, Luis
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Fernández-Ruiz, María R.
12 pags., 6 figs., 1 tab., Phase-sensitive optical time-domain reflectometry (ΦOTDR) is a well-established technique that provides spatio-temporal measurements of an environmental variable in real time. This unique capability is being leveraged in an ever-increasing number of applications, from energy transportation or civil security to seismology. To date, a wide number of different approaches have been implemented, providing a plethora of options in terms of performance (resolution, acquisition bandwidth, sensitivity or range). However, to achieve high spatial resolutions, detection bandwidths in the GHz range are typically required, substantially increasing the system cost and complexity. Here, we present a novel ΦOTDR approach that allows a customized time expansion of the received optical traces. Hence, the presented technique reaches cm-scale spatial resolutions over 1 km while requiring a remarkably low detection bandwidth in the MHz regime. This approach relies on the use of dual-comb spectrometry to interrogate the fibre and sample the backscattered light. Random phase-spectral coding is applied to the employed combs to maximize the signal-to-noise ratio of the sensing scheme. A comparison of the proposed method with alternative approaches aimed at similar operation features is provided, along with a thorough analysis of the new trade-offs. Our results demonstrate a radically novel high-resolution ΦOTDR scheme, which could promote new applications in metrology, borehole monitoring or aerospace., Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326, Generalitat Valenciana under grant PROMETEO/2020/029, the European Research Council (OCEAN-DAS: ERC-2019-POC-875302), the Spanish Government under projects RTI2018–097957-B-C31, RTI2018–097957- B-C32, and RTI2018–097957-B-C33, and Universitat Jaume I under project UJIB2019–45. M.S.A., H.F.M., V.D., and M.R.F.R. acknowledge financial support from the Spanish MICINN under contract no. PRE-2019–08744
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Monitoring of a highly flexible aircraft model wing using time-expanded phase-sensitive OTDR

  • Soriano-Amat, Miguel
  • Fragas-Sánchez, David
  • Martins, Hugo F.
  • Vallespín-Fontcuberta, David
  • Preciado-Garbayo, Javier
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Fernández-Ruiz, María R.
10 pags., 4 figs., 1 tab. -- This article belongs to the Special Issue Distributed Optical Fiber Sensors: Applications and Technology, In recent years, the use of highly flexible wings in aerial vehicles (e.g., aircraft or drones) has been attracting increasing interest, as they are lightweight, which can improve fuel-efficiency and distinct flight performances. Continuous wing monitoring can provide valuable information to prevent fatal failures and optimize aircraft control. In this paper, we demonstrate the capabilities of a distributed optical fiber sensor based on time-expanded phase-sensitive optical time-domain reflectometry (TE-ΦOTDR) technology for structural health monitoring of highly flexible wings, including static (i.e., bend and torsion), and dynamic (e.g., vibration) structural deformation. This distributed sensing technology provides a remarkable spatial resolution of 2 cm, with detection and processing bandwidths well under the MHz, arising as a novel, highly efficient monitoring methodology for this kind of structure. Conventional optical fibers were embedded in two highly flexible specimens that represented an aircraft wing, and different bending and twisting movements were detected and quantified with high sensitivity and minimal intrusiveness., This research was supported by the Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326, the European Research Council (OCEAN-DAS: ERC-2019-POC-875302), the Spanish Government under projects RTI2018-097957-B-C31, and RTI2018-097957-BC33. M.S.-A., H.F.M., J.P.-G. and M.R.F.-R. acknowledge financial support from the Spanish MICINN under contract no. PRE-2019-087444, IJCI-2017-33856, DI-17-09169 and IJC2018-035684-I, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ground vibrations recorded by fiber-optic cables reveal traffic response to COVID-19 lockdown measures in Pasadena, California

  • Wang, Xin
  • Zhan, Zhongwen
  • Williams, Ethan F.
  • González-Herráez, Miguel
  • Martins, Hugo F.
  • Karrenbach, M.
9 pags., 5 figs., The COVID-19 lockdown has unprecedently affected the dynamics of our society. As traffic flow is a good proxy for societal activity, traffic monitoring becomes a useful tool to assess the lockdown’s impacts. Here we turned two strands of unused telecommunication fibers in Pasadena, California into a seismic array of ~5,000 sensors and detected ground vibrations caused by moving vehicles along the streets above the cable. We monitor the number of vehicles and their mean speed between December 2019 and August 2020 in high spatial and temporal resolution, and then analyze the traffic patterns change due to the COVID-19 lockdown. Our results show a city-wide decline in traffic volume and an increase in speed due to the lockdown, although the level of impact varies substantially by streets. This study demonstrates the feasibility of using telecommunication fiber optic cables in traffic monitoring, which has implications for public health, economy, and transportation safety, We thank the City of Pasadena for contributing its fiber optic cables to our research. The DAS instruments used in this study were provided by the OptaSense, University of Alcala, and Aragon Photonics. This work is supported by NSF CAREER award #1848166; the Young Elite Scientists Sponsorship Program by CAST (grant 2020QNRC001); the Key Research Program of the Institute of Geology & Geophysics, CAS (grant IGGCAS-201904); the Spanish MICINN (RTI2018-097957-B-C31, RTI2018-097957-B-C33); the European Research Council (OCEAN-DAS: ERC-2019-POC-875302). The work of HFM was supported by MINECO (“Juan de la Cierva” postdoc contract IJCI-2017-33856)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Virtual transparency in ϕ-OTDR using second order Raman amplification and pump modulation

  • Nuño, Javier
  • Martín-López, Sonia
  • Ania Castañón, Juan Diego
  • González-Herráez, Miguel
  • Martins, Hugo F.
10 pags., 6 figs., In distributed optical fibre sensors, distributed amplification schemes have been investigated in order to increase the measurement range while avoiding the limitation imposed by the fibre attenuation and the nonlinear effects. Recently, the use of Raman amplification with an engineered intensity modulation has been demonstrated as an efficient way to produce a virtually lossless trace employing a single-end configuration. In this paper, we propose the combination of this technique with a simultaneous second order Raman pumping scheme for increasing the measurement range. The optimal modulation profile has been numerically analyzed and we experimentally demonstrate a sensor able to detect perturbations along 70 km of fibre, with a minimal SNR penalty along the total length. Thanks to this new approach, the sensitivity in the worst point is considerably improved, and the ASD noise floor is also reduced. The measurement range is extended approximately 15 km compared with the equivalent first order pumping case., Comunidad de Madrid (SINFOTON2-CM: P2018/NMT-4326, TALENTO-CM 2017-T2/TIC-5227); European Research Council (OCEAN-DAS: ERC-2019-POC-875302); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-B-C31, RTI2018-097957-B-C33).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Resolution Distributed Optical Fiber Sensing Using Time-Expanded Phase-Sensitive Reflectometry

  • Fernández-Ruiz, María R.
  • Soriano-Amat, M.
  • Martins, Hugo F.
  • Durán, Vicente
  • Martín-López, Sonia
  • Gonzalez-Herraez, M.
6 pages, 2 figures, We have demonstrated a novel scheme for distributed optical fiber sensing based on the use of a dual frequency comb, which enables the development of a high-resolution (in the cm range) distributed sensor with significantly relaxed electronic requirements compared with previous schemes. This approach offers a promising solution for real time structure monitoring in a variety of fields, including transportation, manufacturing or mechatronics. In this work, we review the principle of operation of the technique, recent advances to improve its performance and different experimental tests., Comunidad de Madrid and FEDER Program (grant SINFOTON2-CM: P2018/NMT-4326), Generalitat Valenciana (grant PROMETEO/2020/029), the European Research Council (OCEAN-DAS: ERC-2019-POC-875302), the Spanish Government (projects RTI 2018–097957-B-C31, RTI 2018–097957-B-C32, and RTI 2018–097957-B-C33), Universitat Jaume I (project UJI-B2019–45) and Universidad de Alcalá (project CCG20/IA-028). MS-A, HM, VD, and MFR. acknowledge financial support from the Spanish MICINN under contracts no. PRE-2019–087444, IJCI-2017–33856, RYC2017–23668, and IJC2018–035684-I, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Monitoring of a highly flexible aircraft model wing using time-expanded phase-sensitive OTDR

  • Soriano-Amat, Miguel
  • Fragas-Sánchez, David
  • Martins, Hugo F.
  • Vallespín-Fontcuberta, David
  • Preciado-Garbayo, Javier
  • Martin-Lopez, Sonia
  • Gonzalez-Herraez, Miguel
  • Fernández-Ruiz, María R.
In recent years, the use of highly flexible wings in aerial vehicles (e.g., aircraft or drones) has been attracting increasing interest, as they are lightweight, which can improve fuel-efficiency and distinct flight performances. Continuous wing monitoring can provide valuable information to prevent fatal failures and optimize aircraft control. In this paper, we demonstrate the capabilities of a distributed optical fiber sensor based on time-expanded phase-sensitive optical time-domain reflectometry (TE-ΦOTDR) technology for structural health monitoring of highly flexible wings, including static (i.e., bend and torsion), and dynamic (e.g., vibration) structural deformation. This distributed sensing technology provides a remarkable spatial resolution of 2 cm, with detection and processing bandwidths well under the MHz, arising as a novel, highly efficient monitoring methodology for this kind of structure. Conventional optical fibers were embedded in two highly flexible specimens that represented an aircraft wing, and different bending and twisting movements were detected and quantified with high sensitivity and minimal intrusiveness.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Quadratic phase coding for SNR improvement in time-expanded phase-sensitive OTDR

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Durán, Vicente
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
M.S.A., H.F.M., V.D., and M.R.F.R. acknowledge financial support from the Spanish MICINN under contract no. PRE-2019–087444, IJCI-2017–33856, RYC-201723668, and IJC2018–035684-I, respectively., Time-expanded phase-sensitive optical time-domain reflectometry (TE−ΦOTDR ) is a dual-comb-based distributed optical fiber sensing technique capable of providing centimeter scale resolution while maintaining a remarkably low (MHz) detection bandwidth. Random spectral phase coding of the dual combs involved in the fiber interrogation process has been proposed as a means of increasing the signal-to-noise ratio (SNR) of the sensor. In this Letter, we present a specific spectral phase coding methodology capable of further enlarging the SNR of TE−ΦOTDR . This approach is based on the use of a quadratic spectral phase to precisely control the peak power of the comb signals. As a result, an SNR improvement of up to 8 dB has been experimentally attained with respect to that based on the random phase coding previously reported., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Jaume I, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Time-expanded phase-sensitive optical time-domain reflectometry

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Durán, Vicente
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
Phase-sensitive optical time-domain re flectometry (ΦOTDR) is a well-established technique that provides spatiotemporal measurements of an environmental variable in real time. This unique capability is being leveraged in an everincreasing number of applications, from energy transportation or civil security to seismology. To date, a wide number of different approaches have been implemented, providing a plethora of options in terms of performance (resolution, acquisition bandwidth, sensitivity or range). However, to achieve high spatial resolutions, detection bandwidths in the GHz range are typically required, substantially increasing the system cost and complexity. Here, we present a novel ΦOTDR approach that allows a customized time expansion of the received optical traces. Hence, the presented technique reaches cm-scale spatial resolutions over 1 km while requiring a remarkably low detection bandwidth in the MHz regime. This approach relies on the use of dual-comb spectrometry to interrogate the fibre and sample the backscattered light. Random phase-spectral coding is applied to the employed combs to maximize the signal-to-noise ratio of the sensing scheme. A comparison of the proposed method with alternative approaches aimed at similar operation features is provided, along with a thorough analysis of the new trade-offs. Our results demonstrate a radically novel high-resolution ΦOTDR scheme, which could promote new applications in metrology, borehole monitoring or aerospace., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Universitat Jaume I, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Using global existing fiber networks for environmental sensing

  • Ip, Ezra
  • Ravet, Fabien
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Huang, Ming-Fang
  • Okamoto, Tatsuya
  • Han, Shaobo
  • Narisetty, Chaitnaya
  • Fang, Jian
  • Huang, Yue-Kai
  • Salemi, Milad
  • Rochat, Etienne
  • Briffod, Fabien
  • Goy, Alexandre
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
We review recent advances in distributed fiber optic sensing (DFOS) and their applications. The scattering mechanisms in glass, which are exploited for reflectometry-based DFOS, are Rayleigh, Brillouin, and Raman scatterings. These are sensitive to either strain and/or temperature, allowing optical fiber cables to monitor their ambient environment in addition to their conventional role as a medium for telecommunications. Recently, DFOS leveraged technologies developed for telecommunications, such as coherent detection, digital signal processing, coding, and spatial/frequency diversity, to achieve improved performance in terms of measurand resolution, reach, spatial resolution, and bandwidth. We review the theory and architecture of commonly used DFOS methods. We provide recent experimental and field trial results where DFOS was used in wide-ranging applications, such as geohazard monitoring, seismic monitoring, traffic monitoring, and infrastructure health monitoring. Events of interest often have unique signatures either in the spatial, temporal, frequency, or wavenumber domains. Based on the temperature and strain raw data obtained from DFOS, downstream postprocessing allows the detection, classification, and localization of events. Combining DFOS with machine learning methods, it is possible to realize complete sensor systems that are compact, low cost, and can operate in harsh environments and difficult-to-access locations, facilitating increased public safety and smarter cities., Comunidad de Madrid, Ministerio de Ciencia e Innovación, Universidad de Alcalá, Agencia Estatal de Investigación, European Commission