Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mechanochemically engineered bimetallic PtNi/CeO2 catalysts for enhanced methane steam reforming

  • Braga, Andrea
  • Armengol Profitós, Marina
  • Pascua Solé, Laia|||0000-0001-9791-4586
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Jiménez Divins, Nuria|||0000-0001-6010-5419
Bimetallic PtNi/CeO2 catalysts were successfully synthesized via a mechanochemical approach, specifically ball milling, and evaluated for methane steam reforming (MSR). A fractional factorial design of experiments was employed to systematically explore the effects of key milling parameters-milling frequency, milling time, and ball-to-powder ratio-on the catalysts’ structural properties and catalytic performance. The catalysts were characterized by X-ray diffraction, H2 temperature-programmed reduction, transmission electron microscopy, and Raman spectroscopy. Catalytic activity tests were performed in a plug flow reactor under a high gas hourly space velocity (200,000 mL gcat–1 h–1) at a steam-to-carbon ratio of 2 between 700 and 950 °C. The mechanochemically synthesized catalysts were benchmarked against those prepared via incipient wetness impregnation. The most active milled catalysts achieved a methane conversion rate of ca. 22 mol CH4 gNi–1 h–1 at 700 °C (83.5% methane conversion for a PtNi/CeO2 mechanochemically synthesized), outperforming the impregnated counterpart (64% methane conversion under the same reaction conditions). Notably, increasing the milling intensity resulted in enhanced catalytic activity, with milling frequency emerging as the most influential factor-correlating with the formation of smaller NiO particles. To elucidate the role of Pt addition, in situ X-ray absorption near-edge structure (XANES) and near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) measurements were conducted on the most active milled catalysts under MSR conditions. NAP-XPS revealed surface segregation of Pt during MSR, alongside an inhibitory effect on solid carbon deposition, suggesting the potential for a coke-resistant catalyst. These findings highlight the power of mechanochemical synthesis in tuning catalyst properties, offering a scalable and efficient route to high-performance catalysts for methane reforming and hydrogen production., This work was supported by grant PID2024-156765OB-C21 and is part of Maria de Maeztu Units of Excellence ProgrammeCEX2023-001300-M funded by MCIN/AEI/ 10.13039/501100011033. A.B. is grateful to the European Union’s H2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 813748. M.A.-P. is grateful for the 2020 FISDU 00219 grant from Generalitat de Catalunya. L.P.-S. is grateful for the 2022 FI_B 00 205 grant from Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). N.J.D. acknowledges the funding received from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 897197. In situ synchrotron NAP-XPS experiments were performed at the CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff. We would like to thank the Institute for Beam Physics and Technology (IBPT) for the operation of the storage ring, the Karlsruhe Research Accelerator (KARA). We acknowledge the KIT Light Source for the provision of instruments at the CAT-ACT beamline of the Institute of Catalysis Research and Technology (IKFT), in particular Dr. Danielle Santos Goncalves (IKFT) for her help and technical support during experiments. We would also like to thank Dr. Maria Casapu from KIT for her support during the XAS experiments., Peer Reviewed, Article signat per 13 autors/es: Andrea Braga - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain Marina Armengol-Profitós - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain; Orcid. https://orcid.org/0000-0002-1697-2045 Laia Pascua-Solé - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain; Orcid. https://orcid.org/0000-0001-9791-4586 Lluís Soler - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain; Orcid. https://orcid.org/0000-0003-1591-3366 Isabel Serrano - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain Ignacio J. Villar-Garcia - ALBA Synchrotron Light Source, Carrer de la Llum 2-26, Cerdanyola Del Vallès, Barcelona 08290, Spain Virginia Pérez-Dieste - ALBA Synchrotron Light Source, Carrer de la Llum 2-26, Cerdanyola Del Vallès, Barcelona 08290, Spain Enrico Tusini - Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 20, Karlsruhe 76131, Germany Andrea De Giacinto - Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 20, Karlsruhe 76131, Germany; Orcid. https://orcid.org/0009-0006-6959-1381 Anna Zimina - Institute of Catalysis Research and Technology, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen 76344, Germany; Orcid. https://orcid.org/0000-0002-3111-7741 Jan-Dierk Grunwaldt - Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 20, Karlsruhe 76131, Germany; Institute of Catalysis Research and Technology, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen 76344, Germany; Orcid. https://orcid.org/0000-0003-3606-0956
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mechanochemically engineered bimetallic PtNi/CeO2 catalysts for enhanced methane steam reforming

  • Braga, Andrea
  • Armengol Profitós, Marina
  • Pascua Solé, Laia
  • Soler Turu, Lluís
  • Serrano Carreño, M. Isabel
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Llorca Piqué, Jordi
  • Jiménez Divins, Nuria
Bimetallic PtNi/CeO2 catalysts were successfully synthesized via a mechanochemical approach, specifically ball milling, and evaluated for methane steam reforming (MSR). A fractional factorial design of experiments was employed to systematically explore the effects of key milling parameters-milling frequency, milling time, and ball-to-powder ratio-on the catalysts’ structural properties and catalytic performance. The catalysts were characterized by X-ray diffraction, H2 temperature-programmed reduction, transmission electron microscopy, and Raman spectroscopy. Catalytic activity tests were performed in a plug flow reactor under a high gas hourly space velocity (200,000 mL gcat–1 h–1) at a steam-to-carbon ratio of 2 between 700 and 950 °C. The mechanochemically synthesized catalysts were benchmarked against those prepared via incipient wetness impregnation. The most active milled catalysts achieved a methane conversion rate of ca. 22 mol CH4 gNi–1 h–1 at 700 °C (83.5% methane conversion for a PtNi/CeO2 mechanochemically synthesized), outperforming the impregnated counterpart (64% methane conversion under the same reaction conditions). Notably, increasing the milling intensity resulted in enhanced catalytic activity, with milling frequency emerging as the most influential factor-correlating with the formation of smaller NiO particles. To elucidate the role of Pt addition, in situ X-ray absorption near-edge structure (XANES) and near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) measurements were conducted on the most active milled catalysts under MSR conditions. NAP-XPS revealed surface segregation of Pt during MSR, alongside an inhibitory effect on solid carbon deposition, suggesting the potential for a coke-resistant catalyst. These findings highlight the power of mechanochemical synthesis in tuning catalyst properties, offering a scalable and efficient route to high-performance catalysts for methane reforming and hydrogen production., This work was supported by grant PID2024-156765OB-C21 and is part of Maria de Maeztu Units of Excellence ProgrammeCEX2023-001300-M funded by MCIN/AEI/ 10.13039/501100011033. A.B. is grateful to the European Union’s H2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 813748. M.A.-P. is grateful for the 2020 FISDU 00219 grant from Generalitat de Catalunya. L.P.-S. is grateful for the 2022 FI_B 00 205 grant from Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). N.J.D. acknowledges the funding received from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 897197. In situ synchrotron NAP-XPS experiments were performed at the CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff. We would like to thank the Institute for Beam Physics and Technology (IBPT) for the operation of the storage ring, the Karlsruhe Research Accelerator (KARA). We acknowledge the KIT Light Source for the provision of instruments at the CAT-ACT beamline of the Institute of Catalysis Research and Technology (IKFT), in particular Dr. Danielle Santos Goncalves (IKFT) for her help and technical support during experiments. We would also like to thank Dr. Maria Casapu from KIT for her support during the XAS experiments., Peer Reviewed, Article signat per 13 autors/es: Andrea Braga - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain Marina Armengol-Profitós - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain; Orcid. https://orcid.org/0000-0002-1697-2045 Laia Pascua-Solé - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain; Orcid. https://orcid.org/0000-0001-9791-4586 Lluís Soler - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain; Orcid. https://orcid.org/0000-0003-1591-3366 Isabel Serrano - Department of Chemical Engineering, Institute of Energy Technologies, and Center for Research in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Eduard Maristany 10-14, Barcelona 08019, Spain Ignacio J. Villar-Garcia - ALBA Synchrotron Light Source, Carrer de la Llum 2-26, Cerdanyola Del Vallès, Barcelona 08290, Spain Virginia Pérez-Dieste - ALBA Synchrotron Light Source, Carrer de la Llum 2-26, Cerdanyola Del Vallès, Barcelona 08290, Spain Enrico Tusini - Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 20, Karlsruhe 76131, Germany Andrea De Giacinto - Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 20, Karlsruhe 76131, Germany; Orcid. https://orcid.org/0009-0006-6959-1381 Anna Zimina - Institute of Catalysis Research and Technology, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen 76344, Germany; Orcid. https://orcid.org/0000-0002-3111-7741 Jan-Dierk Grunwaldt - Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 20, Karlsruhe 76131, Germany; Institute of Catalysis Research and Technology, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, Eggenstein-Leopoldshafen 76344, Germany; Orcid. https://orcid.org/0000-0003-3606-0956, Postprint (published version)